Panasonic Lumix DMC-TS2 Technical specifications

Basic Operating Instructions
Digital Camera
Model No. DMC-TS2
Before connecting, operating or adjusting this product,
please read the instructions completely.
Please also refer to Operating
Instructions (PDF format)
recorded on the CD-ROM
containing the Operating Instructions
(supplied).
You can learn about advanced operation methods
and check the Troubleshooting.
until
2010/2/28
VQT2M30
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,
contact us via the web at: http://www.panasonic.com/contactinfo
P
DMC-FT2&TS2P-VQT2M30_eng.book 1 ページ ２０１０年１月２９日 金曜日 午後５時３１分

VQT2M30 (ENG)
2
Dear Customer,
Thank you for choosing Panasonic!
You have purchased one of the most sophisticated and reliable products on
the market today. Used properly, we’re sure it will bring you and your family
years of enjoyment. Please take time to fill in the information below. The
Serial Number is on the tag located on the underside of your Camera. Be
sure to retain this manual as your convenient Camera information source.
Please note that the actual controls and components, menu items, etc. of
your Digital Camera may look somewhat different from those shown in the
illustrations in these Operating Instructions.
Carefully observe copyright laws.
•Recording of pre-recorded tapes or discs or other published or broadcast
material for purposes other than your own private use may infringe copyright
laws. Even for the purpose of private use, recording of certain material may be
restricted.
Please be sure to read “(Important) About the Waterproof/Dustproof and
Anti-shock Performance of the Camera”(P8) and “Maintenance and
Waterproof Performance”(P10) before using this unit underwater to
prevent the unit from being mishandled, which may cause water to seep in.
A lithium ion battery that is recyclable powers the
product you have purchased. Please call
1-800-8-BATTERY for information on how to recycle
this battery.
Model No.
Serial No.
DMC-FT2&TS2P-VQT2M30_eng.book 2 ページ ２０１０年１月２９日 金曜日 午後５時３１分

3
(ENG) VQT2M30
Information for Your Safety
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT
DAMAGE,
•DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING
OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHALL BE PLACED ON THE APPARATUS.
•USE ONLY THE RECOMMENDED ACCESSORIES.
•DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
Product Identification Marking is located on the bottom of units.
DMC-FT2&TS2P-VQT2M30_eng.book 3 ページ ２０１０年１月２９日 金曜日 午後５時３１分

VQT2M30 (ENG)
4
FCC Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:To assure continued compliance, follow the attached
installation instructions and use only shielded interface
cables with ferrite core when connecting to computer
or peripheral devices.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMC-TS2
Responsible party: Panasonic Corporation of North America One
Panasonic Way, Secaucus, NJ 07094
Support Contact: Panasonic Consumer Electronics Company
1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
DMC-FT2&TS2P-VQT2M30_eng.book 4 ページ ２０１０年１月２９日 金曜日 午後５時３１分

5
(ENG) VQT2M30
∫About the battery pack
•Do not heat or expose to flame.
•Do not leave the battery(ies) in an automobile exposed to direct sunlight for a
long period of time with doors and windows closed.
∫About the battery charger
CAUTION
Battery pack (Lithium ion battery pack)
•Use the specified unit to recharge the battery pack.
•Do not use the battery pack with equipment other than the specified unit.
•Do not get dirt, sand, liquids, or other foreign matter on the terminals.
•Do not touch the plug terminals (iand j) with metal objects.
•Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come into contact with your hands or clothes,
wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes, never rub the
eyes. Rinse eyes thoroughly with water, and then consult a doctor.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose
of used batteries according to the manufacturer’s instructions.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC
(140 oF) or incinerate.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT
IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT
CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.
DMC-FT2&TS2P-VQT2M30_eng.book 5 ページ ２０１０年１月２９日 金曜日 午後５時３１分

VQT2M30 (ENG)
6
∫Cautions for Use
•Always use a genuine Panasonic AC adaptor (DMW-AC5PP; optional).
•
Always use a genuine Panasonic multi conversion adaptor (DMW-MCA1; optional).
•Do not use any other AV cables except the supplied one.
•Do not use any other cables except a genuine Panasonic HDMI mini cable
(RP-CDHM15, RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
•Do not use any other USB connection cables except the supplied one.
Keep the camera as far away as possible from electromagnetic
equipment (such as microwave ovens, TVs, video games etc.).
•If you use the camera on top of or near a TV, the pictures and sound on the
camera may be disrupted by electromagnetic wave radiation.
•Do not use the camera near cell phones because doing so may result in noise
adversely affecting the pictures and sound.
•Recorded data may be damaged, or pictures may be distorted, by strong
magnetic fields created by speakers or large motors.
•Electromagnetic wave radiation generated by microprocessors may adversely
affect the camera, disturbing the pictures and sound.
•If the camera is adversely affected by electromagnetic equipment and stops
functioning properly, turn the camera off and remove the battery or disconnect
AC adaptor (DMW-AC5PP; optional). Then reinsert the battery or reconnect AC
adaptor and turn the camera on.
Do not use the camera near radio transmitters or high-voltage lines.
•If you record near radio transmitters or high-voltage lines, the recorded pictures
and sound may be adversely affected.
-If you see this symbol-
Battery charger
This battery charger operates on AC between 110 V and 240 V.
But
•In the U.S.A. and Canada, the battery charger must be connected to a 120 V
AC power supply only.
•When connecting to an AC supply outside of the U.S.A. or Canada, use a
plug adaptor to suit the AC outlet configuration.
Information on Disposal in other Countries outside
the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your
local authorities or dealer and ask for the correct
method of disposal.
DMC-FT2&TS2P-VQT2M30_eng.book 6 ページ ２０１０年１月２９日 金曜日 午後５時３１分

7
(ENG) VQT2M30
Contents
Information for Your Safety...........................................................................3
(Important) About the Waterproof/
Dustproof and Anti-shock Performance of the Camera ................................8
Maintenance and Waterproof Performance................................................10
• Using the camera underwater...............................................................14
• Causes of water leak ............................................................................15
• Caring of the camera after using it underwater.....................................16
Standard Accessories.................................................................................18
Names of the Components .........................................................................19
Charging the Battery...................................................................................21
About the Built-in Memory/the Card............................................................23
Inserting and Removing the Card (optional)/the Battery.............................24
Setting Date/Time (Clock Set).....................................................................25
• Changing the Clock setting...................................................................25
Setting the Menu.........................................................................................26
Selecting the [REC] Mode...........................................................................27
Taking Pictures Using the Automatic Function
(ñ: Intelligent Auto Mode).........................................................................28
• Scene Detection....................................................................................29
• AF Tracking Function............................................................................29
Recording Motion Picture............................................................................30
Playing Back Pictures ([NORMAL PLAY]) ..................................................31
Deleting Pictures.........................................................................................31
Reading the Operating Instructions
(PDF format) ...............................................................................................32
Specifications..............................................................................................34
Digital Camera Accessory System..............................................................38
Digital Camera Accessory Order Form.......................................................39
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) .................................................40
DMC-FT2&TS2P-VQT2M30_eng.book 7 ページ ２０１０年１月２９日 金曜日 午後５時３１分

VQT2M30 (ENG)
8
(Important) About the Waterproof/
Dustproof and Anti-shock Performance of
the Camera
•Please observe the following precautions, and avoid using this camera in any
situation where the camera is subject to high water pressure. This camera’s
waterproof/dustproof rating complies with the “IPX8” and “IP6X” ratings.
Provided the care and maintenance guidelines described in this document are
strictly followed, this camera can operate underwater, to a depth not exceeding
10 m (33 feet) for a time not exceeding 60 minutes.¢1
•This camera also complies with “MIL-STD 810F (Method 516.5-Shock)”. The
camera has cleared a drop test from a height of 2 m (6.6 feet) onto 3 cm
(0.10 feet) thick plywood. In most cases this camera should not sustain any
damage if dropped from a height not exceeding 2 m (6.6 feet).¢2
•Supplied accessories are not waterproof (excluding hand strap/silicon jacket).
¢1 This means that the camera can be used underwater for a specified time in
specified pressure in accordance with the handling method established by
Panasonic. This does not guarantee no destruction, no malfunction, or
waterproofing in all conditions.
¢2 This doesnot guarantee no destruction, no malfunction,or waterproofing in all
conditions.
Observe the following precautions and avoid using under water pressure
exceeding the guaranteed performance, and in an environment with
excessive dust or sand.
Waterproofing is not guaranteed if the unit is subject to an impact as a result
of being hit or dropped etc.
If an impact to the camera occurs, it should be inspected (subject to a fee) by
a Panasonic Service Center to verify that the waterproofing is still effective.
Any malfunction caused by customer misuse, or mishandling will not be
covered by the warranty.
Note
•The picture can become whitish if there is dirt e.g. fingerprints on the lens.
When it is dirty, lightly wipe the surface of the lens with a soft and dry cloth.
DMC-FT2&TS2P-VQT2M30_eng.book 8 ページ ２０１０年１月２９日 金曜日 午後５時３１分

9
(ENG) VQT2M30
∫Handling of the camera
•Do not leave the camera for a long period of time in places where temperature is
very low (ski resort etc.) or very high [above 40 oC (104 oF)], inside a car under
strong sunlight, close to a heater, on the beach, etc. Waterproof performance
may be degraded.
•The inside of this unit is not waterproof. Do not open or close the card/battery
door or terminal cover close to the water by the sea, a lake or river, or with wet
hands.
•Waterproof function of the camera is for sea water and fresh water only.
•Operation may not be possible when snow or water freezes on the zoom lever,
mode dial or camera [OFF/ON] button in cold places like ski resorts etc.
∫About the [PRECAUTIONS] demonstration display
•Please check beforehand to maintain the waterproof performance.
[PRECAUTIONS] is displayed when the power is turned
on for the first time after purchase, with the card/battery
door completely closed.
•The [PRECAUTIONS] screen will not display the next time
you turn on the power if you start the slide show by selecting
[YES], and then select [END] once it has completed. Select
[REPLAY] to see the slide show again.
Note
•It will automatically skip to the Clock setting screen if [NO] is selected before the
Slide Show starts.
•[PRECAUTIONS] is displayed every time the power is turned on if you exited the
slide show using a method other than selecting [END], such as turning off the
power while the slide show is playing.
•This can be also confirmed from [PRECAUTIONS] in the [SETUP] menu.
VQT2M30~Body1_eng.fm 9 ページ ２０１０年２月２日 火曜日 午後６時２６分

VQT2M30 (ENG)
10
Maintenance and Waterproof Performance
∫To prevent water leaking into the camera, observe the following
items before using it.
∫Check that there is enough remaining battery power or memory in
the card.
∫Do not open or close the card/battery door or terminal cover in
places with sand and dust, or with wet hands.
∫At purchase, the [LOCK] switch is in the locked state. When opening
the card/battery door and terminal cover, first release the lock.
•Release the lock by sliding the [LOCK] switch in the direction of the arrow until
the red area becomes visible, and open the card/battery door and terminal
cover.
A: [LOCK] switch (gray part)
B: Locked state
C:Red part
D: Released state
DMC-FT2&TS2P-VQT2M30_eng.book 10 ページ ２０１０年１月２９日 金曜日 午後５時３１分

11
(ENG) VQT2M30
Confirm that there are no foreign objects on inner side of
the card/battery door or terminal cover (Brubber seal
and Cplace where rubber seal meet).
•If there is any crack or deformation in the rubber seal inside the card/battery
door and terminal cover, get the camera inspected or repaired by the dealer or
an authorized Panasonic Service Center.
If there is any foreign object, remove
with attached brush.
I: Brush (supplied)
•If there is any foreign object, such as lint, hair, sand, etc., on the
surrounding area, water will leak within a few seconds causing
malfunction.
A: Terminal cover
B: Rubber seal
C: Area where rubber seal
sits
D: Card/Battery door
E: Hair and lint
F: Sand and dust
G: Crack and deformation
H:Fluid
DMC-FT2&TS2P-VQT2M30_eng.book 11 ページ ２０１０年１月２９日 金曜日 午後５時３１分

VQT2M30 (ENG)
12
•Wipe it off with a dry soft cloth if there is any liquid.
•The integrity of the rubber seals may decrease after about 1 year, with use and
age. To avoid permanently damaging the camera the seals should be replaced
once each year. Please contact Panasonic Service Center for related costs and
other information.
Example of foreign object on the inner side of the card/battery door
J: Area where rubber seal
sits (around the card/
battery compartment)
K: Rubber seal site (around
the card/battery cover)
Example of foreign object on the inner side of the terminal cover
L: Area where rubber seal
sits (around the
connection terminal)
M: Rubber seal site (around
the terminal cover)
DMC-FT2&TS2P-VQT2M30_eng.book 12 ページ ２０１０年１月２９日 金曜日 午後５時３１分

13
(ENG) VQT2M30
1:With the [LOCK] switch released, close the card/
battery door and terminal cover by pushing until you
hear a click.
•To prevent water seeping into the camera, be careful not to trap foreign
objects such as liquids, sand, hair or dust etc.
•Closing the door with the [LOCK] switch in the locked state may result in
damage or leaks.
2:Slide the [LOCK] switch in the direction of the arrow
until the visible red area is no longer visible and the
switch is locked.
•If you use the camera without securely closing the door and cover, it may
open and close of its own accord.
Note
•If there is any foreign object, remove it
with attached brush.
•Sand and dust etc. will unintentionally
adhere to the camera by lodging in
between the gap around the card/
battery door or terminal cover when
used in the following locations:
–Where sand is floating, such as in the
sea or water etc.
–Where there is a lot of sand or dust,
such as at the beach or in a sand box
etc.
•To prevent unintentional opening of the card/battery door and terminal
cover, it is recommended to use the supplied silicon jacket.
N:Red area
O: [LOCK] switch (gray part)
P: Released state
Q: Locked state
DMC-FT2&TS2P-VQT2M30_eng.book 13 ページ ２０１０年１月２９日 金曜日 午後５時３１分

VQT2M30 (ENG)
14
•Use the camera underwater up to 10 m (33 feet) depth, water temperature from
0oC to 40 oC (32 oF to 104 oF), and not longer than 60 minutes continuously.
•If there is water or dirt on the camera, use it after wiping it off with a dry soft cloth
and have it dry out in a well ventilated area.
•Do not open or close the card/battery door or terminal cover.
•Do not apply shock to the camera underwater. (Waterproof performance may not
be maintained, and there is a chance of water leak.)
•Do not dive into the water holding the camera. Do not use the camera at a
location where water will splash strongly, such as rapid flow or a waterfall.
(Strong water pressure may be applied, and it may cause malfunction.)
•The camera will sink in the water. Take care not to drop the camera and lose it
underwater by securely placing the hand strap around your wrist or similar
measure.
•Do not use it in hot water over 40 oC (104 oF) (in the bath or hot spring).
•When the camera is splashed with detergent, soap, hot spring, bath additive,
sun oil, sun screen, chemical, etc., wipe it off immediately.
•Card and battery are not waterproof. Do not handle with a wet hand. Also, do not
insert wet card or battery into the camera.
Using the camera underwater
DMC-FT2&TS2P-VQT2M30_eng.book 14 ページ ２０１０年１月２９日 金曜日 午後５時３１分

15
(ENG) VQT2M30
•When the camera is used in the following conditions, a gap may occur between
the camera and the card/battery door or terminal cover, causing water to leak
and malfunction.
–When there are foreign objects, such as lint, hair, sand, etc., between the card/
battery door or terminal cover and the camera.
–When the rubber seal has deteriorated.
–When the [LOCK] switch is not closed on the card/battery door and terminal
cover.
Causes of water leak
A: Water will leak through
the gap formed remove.
B: Water
C: Terminal cover
D: Card/Battery door
E: Hair and lint
F: Sand and dust
G: Crack and deformation
H:Fluid
DMC-FT2&TS2P-VQT2M30_eng.book 15 ページ ２０１０年１月２９日 金曜日 午後５時３１分

VQT2M30 (ENG)
16
1With the card/battery door and
terminal cover closed, rinse with
water, or if it was used in the sea,
soak the unit in fresh water in a
shallow container for 10 minutes or
less.
•If you have attached the silicon jacket,
be sure to rinse the camera after
removing it.
•Leaving the camera with foreign objects or saline matter on it may cause
damage, discoloration, corrosion, unusual odour, or deterioration.
2Wipe off the water, and dry the
camera by standing it on a dry
cloth in a well ventilated shaded
area.
3Confirm there is no water on the
camera, and open the card/battery
door and terminal cover.
4Wipe off any water or sand inside
the card/battery door and terminal cover with a soft dry cloth.
Caring of the camera after using it underwater
DMC-FT2&TS2P-VQT2M30_eng.book 16 ページ ２０１０年１月２９日 金曜日 午後５時３１分

17
(ENG) VQT2M30
∫This unit incorporates a drain design
This unit incorporates a drain design, draining
water from gaps in the camera [OFF/ON]
button and zoom lever etc. As a result of this,
bubbles may come out when you soak the
unit in water, but it is not a malfunction.
Note
•Wipe off the water and dirt on the camera with a dry soft cloth.
•Do not leave the camera uncared for more than 60 minutes after using it
underwater. It may cause deterioration of the waterproof performance.
•After use at the seaside or under water, make sure that the card/battery door
and terminal cover are firmly closed and soak the unit in fresh water in a shallow
container for 10 minutes or less.
•If the zoom lever, mode dial, or camera [OFF/ON] button do not move smoothly,
it may be caused by an adhesion of foreign objects. Using the camera in such a
state may cause malfunctions, such as locking up, so wash off any foreign
objects by soaking the camera in fresh water. Confirm that the zoom lever, mode
dial, and camera [OFF/ON] button move smoothly after cleaning.
•After soaking or washing the unit, wipe off water drops with a dry soft cloth and
dry the unit in a shaded area which is well ventilated.
•Make sure that water is completely drained from the unit after soaking in water
by standing the unit on a dry cloth for a while.
•Do not dry the camera with hot air from a dryer or similar. Waterproof
performance will deteriorate due to possible deformation.
•Do not use chemicals such as benzine, thinner, alcohol, cleanser, or soap or
detergents.
•Example of water droplets around card/battery slot.
A: Water droplet
B:Battery
C:Card
•Water droplets may attach to the card or the battery when the card/battery door
is opened without fully drying the camera after it is used underwater or soaked in
fresh water. Be sure to wipe off the water with a soft dry cloth in such cases.
•Do not open or close the card/battery door and terminal cover with droplets of
water still on the camera. The water droplets may seep into the camera, causing
condensation or failure.
DMC-FT2&TS2P-VQT2M30_eng.book 17 ページ ２０１０年１月２９日 金曜日 午後５時３１分

VQT2M30 (ENG)
18
Standard Accessories
Check that all the accessories are included before using the camera.
Product numbers correct as of January 2010. These may be subject to change.
1 Battery Pack
(Indicated as battery pack or
battery in the text)
Charge the battery before use.
2 Battery Charger
(Indicated as battery charger or
charger in the text)
3 USB Connection Cable
4 AV Cable
5 CD-ROM
•Software:
Use it to install the software to your
PC.
•Operating Instructions
6Brush
7 Silicon Jacket
8 Hand Strap
9 Battery Case
•Supplied accessories are not waterproof
(excluding hand strap/silicon jacket).
•Keep the Brush out of reach of children
to prevent swallowing.
•The charger is stored inside the silicon
jacket.
•SD Memory Card, SDHC Memory Card
and SDXC Memory Card are indicated
as card in the text.
•The card is optional.
You can record or play back pictures
on the built-in memory when you are
not using a card.
•For information about optional
accessories, refer to the “Digital Camera
Accessory System”.
•If any accessories are lost, customers should contact Panasonic’s parts
department at 1 800 833-9626 for further information about obtaining
replacement parts.
DMW-BCF10PP DE-A59B
34
VGQ0D56
9
12
K1HA14CD0004K1HA14AD0003
8
VFC4393
7
VMG1932
6
VFC4364/
VFC4537
5
VFF0593
DMC-FT2&TS2P-VQT2M30_eng.book 18 ページ ２０１０年１月２９日 金曜日 午後５時３１分

19
(ENG) VQT2M30
Names of the Components
1Flash
2 Self-timer indicator/
AF Assist Lamp/LED light
3 Lens
4 LCD monitor
5 Motion picture button
6 [MENU/SET] button
7 [DISPLAY] button
8 [Q.MENU]/Delete button
9 Playback button
10 Mode dial
11 Cursor buttons
A:3/Exposure Compensation/Auto
Bracket/White Balance fine
adjustment
B: 4/Macro Mode/
AF Tracking
C: 2/Self-timer button
D:1/Flash setting button
In these Operating Instructions, the cursor buttons are described as
shown in the figure below or described with 3/4/2/1.
e.g.: When you press the 4(down) button
or Press 4
21 3
4511
786
9
10
DMC-FT2&TS2P-VQT2M30_eng.book 19 ページ ２０１０年１月２９日 金曜日 午後５時３１分

VQT2M30 (ENG)
20
12 Speaker
13 Microphone
14 Zoom lever
15 Camera [OFF/ON] button
16 Shutter button
17 Hand strap eyelet
•Be sure to attach the hand strap when
using the camera to ensure that you will
not drop it.
18 [HDMI] socket
19 [AV/DIGITAL/MULTI] socket
•When using an AC adaptor, ensure that
the Panasonic multi conversion adaptor
(DMW-MCA1; optional) and AC adaptor
(DMW-AC5PP; optional) are used.
20 Tripod receptacle
•When you use a tripod, make sure the
tripod is stable when the camera is
attached to it.
21 Card/Battery door
22 Release lever
23 [LOCK] switch
e.g.: To make subjects appear closer
use (Tele)
Place your finger on the zoom lever,
and press [T]
13 1412
1615
19
18 17
2120
22 23
DMC-FT2&TS2P-VQT2M30_eng.book 20 ページ ２０１０年１月２９日 金曜日 午後５時３１分