10
WARNING
Power supply
Do not damage or modify, or
forcefully bend, pull, or twist the
cord. Also, do not place anything
heavy on or pinch the cord.
Do not immerse the AC adaptor
in water or wash it with water.
Do not place the AC adaptor over
or near water lled sink or bathtub.
Never use the appliance if the
AC adaptor is damaged or if the
power plug ts loosely in a
household outlet.
‑
Doing so may cause electric
shockorreduetoashortcircuit.
Do not connect or disconnect
the adaptor to a household
outlet with a wet hand.
‑ Doing so may cause electric
shock or injury.
Do not use in a way exceeding
the rating of the household
outlet or the wiring.
‑ Exceeding the rating by
connecting too many plugs to one
householdoutletmaycausere
due to overheating.
Always ensure the appliance is
operated on an electric power
source matched to the rated
voltage indicated on the AC
adaptor.
Fully insert the adaptor or
appliance plug.
‑ Failuretodosomaycausere
or electric shock.
This product
This product has a built‑in
rechargeable battery. Do not throw
into ame or heat. Do not charge,
use, or leave in high temperatures.
‑
Doing so may cause overheating,
ignition, or explosion.
Do not modify or repair.
‑ Doingsomaycausere,electric
shock, or injury. Contact an
authorized service centre for
repair (battery change etc.).
Safety precautions
To reduce the risk of injury, loss of life,
electricshock,re,anddamageto
property, always observe the following
safety precautions.
Explanation of symbols
The following symbols are used to
classify and describe the level of hazard,
injury, and property damage caused
when the denotation is disregarded and
improper use is performed.
DANGER
Denotes a potential hazard that will
result in serious injury or death.
WARNING
Denotes a potential hazard that could
result in serious injury or death.
CAUTION
Denotes a hazard that could result in
minor injury or property damage.
The following symbols are used to
classify and describe the type of
instructions to be observed.
This symbol is used to alert users
toaspecicoperatingprocedure
that must not be performed.
This symbol is used to alert users
toaspecicoperatingprocedure
that must be followed in order to
operate the unit safely.
PB015615 - EL8A-3A-2A������_(01GB)_01-26-18.indd 10 2018/1/26 13:42:33
