Panasonic NE-2153-2EUG User manual

© Panasonic Corporation 2014 Unauthorized copy-
ing and distribution is a violation of law.
Order Number MOD1407415CE
Microwave Oven
Model No. NE-2153-2EUG
Model No. NE-2143-2EUG
Destination : Continental Europe Countries
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions----------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Location of Controls and Components ------------------- 3
4 Operating Instructions------------------------------------------ 5
5 Test Mode ----------------------------------------------------------18
6 Troubleshooting Guide ----------------------------------------20
7 Disassembly and Assembly Instructions ---------------22
8 Measurements and Adjustments---------------------------26
9 Wiring Connection Diagram ---------------------------------27
10 Schematic Diagram ---------------------------------------------28
11 Exploded View and Replacement Parts List -----------29

2
1 Safety Precautions
2 Specifications
*IEC Test Procedure
Specifications subject to change without notice.
Models: NE-2143-2 NE-2153-2
Power Source: 50 Hz, single phase 230V 50 Hz, single phase 230V
Power Requirement: 14.3A 3160W 14.3A 3160W
*Output: HIGH 2100 W* P10: 2100 W*
MEDIUM
HIGH ---------------
P9: 90%
P8: 80%
P7: 70%
P6: 60%
MEDIUM 1050 W P5: 50%
P4: 40%
LOW --------------- P3: 30%
P2: 25%
DEFROST 340 W P1: 340 W
OFF --------------- P0: 0%
HEAT FROM
TOP DOWN --------------- PU1: 50%
PU2: 25%
HEAT FROM
BOTTOM --------------- PL1: 50%
PL2: 25%
Frequency: 2,450 MHz 2,450 MHz
Outside Dimensions (WDH) 422 mm 508 mm 337 mm 422 mm 508 mm 337 mm
Cavity Dimensions (WDH) 330 mm 310 mm 175 mm 330 mm 310 mm 175 mm
Net Weight 30 kg 30 kg
Timer: Maximum programmable time for heating
= 25 minutes
, =30 minutes
30 minutes (digital)/10 touch pads
Maximum programmable time for single stage heating
P1 and P0=30 minutes
P10-P2, PU1-PL2=15 minutes

3
3 Location of Controls and Components
3.1. Outline diagram

4

5
4 Operating Instructions
4.1. Operation procedure

6

7

8

9

10