Panasonic PT-51DX80V User manual

WARNING
To move set, push from left side of set. Casters on right side
do not pivot in all directions. Set can tip over if moved from
rightside, with risk of personal injury.
ADVERTENClA
Para mover el conjunto, empuJe desde el lado Izqulerdo del
mlsmo. Los rolanas de la derecha no son pivotantes en todas
las direcciones. E1 conjunto se puede tumbar si se lo mueve
desde el lado derecho, corriendo asf el riesgo de sufrir dafios
personales.
Mise en garde
Lors du d6placement du t616viseur, le pouser sur son c6t6
gauche. Les roulettes du c6t6 droit ne pouvant tourner dans
toutes les directions, l'appareil pourrait tomber s'il est pouss6
de ce c6t6 et causer ainsi des risques de blessure.
W_
A WARNING
WARNING: To reduce the risk of elec'¢ic shock do not remove cover or Pack,
NO user-serviceabte parts inside. Refer servicing to qualil_d service personnel,
_The lightning flash with arrow _ The exclamation point within a
head within a thangle Is _triangle is intended to lali the
intended to tell the user that user that important operating
parts inside the product am a and servicing insthJctions are in
risk of electric shock to parsons, the papers with the appliance,
WARNING: To prevent fire or shock hazard, do notexpose this appliance
to rain or moisture.
Certain audlo features of this product am manufactured under alicense from Desper Products. Inc
S_ttialiTJ_l _ and the civic-in-squat device andtrademarks owned by D_s_r Products, Inc
Spafializer US, PalcnLsat©:4,308,423; 4,355,203 and 5,412.731

Table of Contents
TABLE OF CONTENTS
Congratulations ........................................................ 2
Customer Record.......................................................................... 2
Care and Cleaning........................................................................ 2
Specifications ................................................................................ 2
Installation ................................................................. 3
Television Location ....................................................................... 3
Optional Cable Connections ......................................................... 3
AC Power Supply Cord................................................................. 3
Cable /Antenna Connection ......................................................... 3
Optional Equipment Connections ........................... 4
VCR Connection ........................................................................... 4
Cable Box Connection ................................................................. 5
VCR and Cable Box Connection ................................................. 6
Amplifier Connection (To Audio Amp) ......................................... 7
Program Out Connection (PROG.OUT) ....................................... 7
Home Theater Connection ....................................... 8
Picture In Picture (PIP) Operation ........................... 9
Basic PIP Operation .................................................................... 9
PIP Operation with a Cable Box .................................................. 9
Roller Guide Menu TM .............................................. 10
Basic Navigation ......................................................................... 10
Remote Control Guide ................................................................ 10
Roller Guide Menu TM Chart .................................... 11
Special Features ..................................................... 14
Program Channels ................................................................... _,.14
Closed Caption ........................................................................... 14
Convergence .............................................................................. 15
Sleep Timer ................................................................................ 16
Timer 1 and 2.............................................................................. 16
Picture Adjustments .................................................................... 17
Dolby Center Mode & Fixed Audio Out....................................... 17
Favorite Channels and Captions ................................................ 18
Lock ........................................................................................... 19
Digital TV Set-Top Box (DTV-STB) Connection ...20
Glossary .................................................................. 21
Frequently Asked Questions About Digital TV ....22
Troubleshooting Chart ........................................... 23
Read these instructionscompletely before operatingTV.
Contents are subjectto changewithout notice or obligation.
Copyright 1999 by Matsushita Electric Corporation of America. All rights reserved,
Unauthorized copying and distribution is a violation of law. []

CONGRA TULA TIONS
Congratulations
Your new Projection Television (PTV) features state-of-the-art technology for high quality picture
and sound with complete audio/video connections for your home theater system. This PTV is
also SDTV compatible. Standard television signals are displayed in progressive scan format
providing aclear, crisp picture without visible scan lines. Your PTV is designed to give you many
years of enjoyment. It was thoroughly tested and tuned at the factory for best performance.
Customer Record
The model and serial number of this product are located on the back of the TV. You should note
the model and serial number in the space provided and retain as a permanent record of your
purchase. This will aid in identification in the event of theft or loss. Product registration for U.S.
customers is available at: www.prodreg.com/panasonic.
Model
Number
Care and Cleaning
Specifications
Serial
Number
Projection Screen (Turn PTV Off)
The projection screen is a high precision lens system which has a protective screen. The
protective screen isfullywashable with the following precautions:
[3 Use a mild soap solution or window cleaner and a clean cloth.
DO NOT USE ABRASIVE CLEANERS.
Do not use laundry detergent or automatic dishwasher soap.
•Do not use alcohol, ammonia, or petroleum based products.
13 Avoid excessive moisture and wipe dry,
Prevent solutionfrom running intothe receiver below.
OAvoid bumping or scraping the screen.
Cabinet and Remote Control
[3 For cabinets and remote control, use a soft cloth dampened with water or a mild detergent
solution. Avoid excessive moisture and wipe dry.
£3 Do not use benzene, thinner or other petroleum based products.
Power Source
PT-51DX80 PT-61DX80 120V AC, 60Hz
Channel Capability- 181 VHF-t2; UHF-56; Cable-125
4 Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type
8 Audio Input Jacks 500mV RMS 47K Ohm
Video output jack 1Vp-p, 75 Ohm, Phono Jack Type
2 Audio Output Jacks 0-2.0V RMS 4.7K Ohm
2 S-Video input Jacks S-Video (Y-C) Connector
2 Component Video Inputs (Y, Pc, PR) 75 ohm, phono jack type
Specifications are subject to change without notice or obligation.

INSTALLA TION
Installation
Television Location
This unit can be used as part of an entertainment center. Consult your dealer for
available options.
[3 Avoid excessive sunlight or bright lights, including reflections.
[3 Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.
[3 Fluorescent lighting may reduce remote control transmitting range.
[3 Keep away from magnetic equipment, including motors, fans and external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best
results:
[3 Use 75-ohm coaxial shielded cables.
[3 Use appropriate input and output connectors, that match your component connectors.
[3 Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. Polarized plug
Cable _ Anterma Connection
For proper reception, either a cable or antenna connection is required.
Cable Connection Incoming Cable from
Cable Company
Connect the cable supplied by your local cable company to ANT1
connection on back of television. Select cable mode and ANT1 in
SET UP menu under Prog Chan (Program Channels). _) 4_)
Note: A cable converter box may be required for proper reception. 75OhmVHF/UHF
Check with your local cable company for compatibility onbackofTV
requirements.
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna is required. For
best reception, an outdoor antenna is recommended.
Connect home antenna to ANT1 connection on back of
television. Select TV mode and ANT1 in the SET UP menu
under Prog Chan.
-- -- Cable Preset
Cable Mode is preset at the factory.
Antenna users must change to TV mode and
ANT1 in the Set Up Menu under Prog Chan.
Incoming Cable from
Home Antenna
D

INSTALLATION
Optional Equipment Connections
VCR Connection
Followthis diagram when connectingyourtelevisionto a VCR only.
_VCR
v,o,ooo,I J'
ANT INPUT ANT OUTPUT
Incoming Cable
CABLES NOT SUPPLIED
TERMINALS ON BACK OF TV
O@l-
Use either the
S-Video or Video
Auo_o woEo connection.
[]
Note: The remote control must be programmed with supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Viewing a video
Procedure
OOptionA
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Press the TV/MIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Begin the video.
£3 Option B
1. Select ANT2 in the SET UP menu under Prog Chart (Program Channels).
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television program
Procedure
O Option A (Recordingand viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
CI Option B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
5. Press the TVNIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the television program you want to view.

INSTALLA TION
Optional Equipment Connections (Cont.)
Open the door on the TV front panel to use the connections for your optional
equipment (Palmcorder, VCR, or other video components). Select input 4 mode by
pressing TV/VIDEO button.
CONNECTIONS ON FRONTOFTV
o o o]
INPUT 4 VIDEO L - AUDIO - R
Note: A second VCR, a video disc player, video game equipment and DSS equipment can also be
connected to the video inputs. See the optional equipment manual for details.
Cable Box Connection
Follow this diagram when connecting your television to a cable box only.
TERMINALS ON BACK OF TV
Cable Box CEm_R CHANNEL IN_,IT COMFONEN_V]DEO INPU T
12_IMP 50WATrS MAX 1
e_ @@@@@1 -L]
w@@@@@,7
IINpU T 0_
®
incoming Cable
L_ L ___Y
AUDK) VIDEO
VIDEO S-VIDEO
@@@0,..,,-,
@@@
@@@ ,...,.-.
_p_,
OUT
"tOAUDIOAMP
Note: The remote control must be programmed with supplied codes to operate the cable
box. See Programming the Remote Control in the Remote Control Quick Reference
Guide.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view.
Note: Touse special features such as Favorite Channels and Channel Captions (see Special
Features section for more information), ANT1 must be selected in the SET UP menu
under Prog Chan (Program Channels).
IB

INSTALLA TION
Optional Equipment Connections (Cont.)
VCR and Cable Box Connection
Follow this diagram when connecting your television to both a VCR and a cable box.
CABLEBOX
ANT iNPUT ANT GurPUT I
@ @ ,
I ANTINPUT I gUPPLIED
t
Incoming Cable
TERMINALS ON BACK OF TV
IB
Note: The remote control must be programmed with supplied codes to operate the VCR and
cable box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium (scrambled) cable channel you want to view.
Note: Touse special features such as Favorite Channels and Channel Captions (see Special
Features section for more information), ANT1 must be selected in the SET UP menu
under Prog Chan (Program Channels).
Recording a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Press the W/VIDEO button on the remote control to select the input ( VIDEO 1,
VIDEO 2, ere.) connected to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on your VCR.
5. Using your cable box, tune to the premium (scrambled) cable channel you want to
record.
6. Begin recording.
No_: To view a different channel while recording:
Select ANT1 in the SET UP menu under Prog Chan (Program Channel).
Press the W/VIDEO button on the remote control to select TV mode.
Tune the television to a television program (except another premium (scrambled) cable
channel).

/NSTALLA T/ON
Optional Equipment Connections (Cont.)
Amplifier Connection (TO AUDIO AMP)
Tolistenthrougha separatestereo system,connectanexternalaudioamplifierTO AUDIOAMP
inputsonback oftelevision.
Note: TOAUDIO AMP terminalscannot be connecteddirectly toexternal speakers.
Audio Adjustments
1. Select SPEAKERS ON located in the onscreen AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust TV volume to desired level.
4. Adjust amplifier volume to match the TV.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu to
control speakers from the TV or select FIXED AUDIO OUT to control
speakers from the external amplifier.
6. Volume, mute, bass, treble and balance are now controlled through the
television.
Program Out Connection (PROG. OUT)
For viewing the TV audio and video with optional video equipment, connect to PROG.
OUT terminats on the back of the TV.
Procedure
1. Connect optional video equipment to PROG. OUT video and TO AUDIO AMP
R/L Audio terminals.
2. PROG OUT terminal display is the same as the onscreen display.
3. See optional equipment manual for further instructions for recording or
monitoring.
TERMINALS ON BACK OF TV
MONITOR VCR
L
T
r
CABLES NOT SUPPLIED
B

INSTALLA TION
Home Theater Connection
Your TV can be configured to use the TV speakers as center channel speakers in Dolby*
surround sound transmission. Connect a Dolby surround amplifier to CENTER CHANNEL
INPUT on the back of the "IV as shown. DOLBY CENTER MODE & FIXED AUDIO OUT
must be selected in the AUDIO Roller Guide TM**menu under SPEAKERS.
CENTER CHANNEL INPUT
(t) Push and hold down button,
(2) Insert bare wire into terminal
and release button,
VCR
Surround
**U.S. Patent Pending
Left Front
Speaker TV Speakers
Center Channel
Left Rear
Surround Speaker Listener
RigbtFront
Speaker
Right Rear
Surround Speake
[]
*Manufactured under license from Dolby Laboratories. "Dolby", "AC-3", "Pro Logic" and the
double-D symbol are trademarks of Dolby Laboratories.

PICTUREIN PICTURE (PIP_ OPERATION
Picture In Picture (PIP) Operation
This television includes a two tuner Picture In Picture (PIP) feature. This allows
watching two (2) live broadcasts at the same time without or with an external video
source (VCR).
Basic PIP Operation
Procedure
Press the PIP button on the remote control to display the PIP frame onscreen.
Note: Theaudio is for the MainPicture only.
1. Choose channels for the PIP frame by pressing the remote control PIP CHANNEL
up/down buttons.
2. Choose channels for the Main Picture by pressing the remote control CH up/down
buttonsor by using the numeric keypad.
\ I/ SWAP Button
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for
onscreen PIP and Main Picture source status.
PIP Operation with a Cable Box
Procedure
[3 To view premium (scrambled) cable channels through your cable box in the Main Picture:
Note: Use thisprocedure if you want to watch premium (scrambled) cable channels
in the Main Picture while viewing a television program or video in the PIP
frame.
1.
2.
3.
Select ANT2 in the Set Up menu under Prog Chan (Program Channels).
Tune television to Channel 3.
Press the PIP button on the remote control to display the PIPframe onscreen.
Note: The audio is for the Main Picture only.
4. Verify the cable box is ON.
5. Choose channels for the Main Picture by tuning the cable box.
6. Choose channels for the PIP frame by pressing the TM button on the remote control
and using the PIP CHANNEL up/down buttons.
Note: Swap is not available when using the cable box to tune channels. If your
cable box has a video output, it can be connected to the television to allow
you to use all PIP functions. See the equipment manual for more information.
(Tune the PIP to the video input connected to the cable box).
[]

ROLLER GUIDE MENU TM
Roller Guide Menu TM
ROLLER GUIDE MENU TM SELECTIONS
Basic Navigation
Procedure
Press the ACTION button in the middle of the large blue button on the remote control to
display the Roller Guide Menu.
Note: Be careful topress the ACTION button in the midd/e of the button. /f you do
not press in the midd/e of the button, the channe/ or vo/ume keys may be
activated.
£3 Press the CH up/down buttons to rotate the Roller Guide.
Press the left VOL button to exit the Roller Guide Menu.
Navigation in the Roller Guide
Procedure
OPress the ACTION button to select main menu items. CH
OPress the CH up/down buttons to highlight submenus.
£3 Press the VOL buttons to select and adjust features.
Press the ACTION button to return to submenus. VOL VOL
CH
Remote Control Guide
The Remote Control Quick Reference Guide is located within the package provided
with thistelevision.

ROLLER GUIDE MENU TM CHART
Roller Guide Menu TM Chart
SET UP
PROG. CHAN
(Pmgram Channels)
(ClosedCaptioned)
OTHER ADJ.
AUDIO
AUDIOADJ,
(Adjustments)
OTHER ADJ.
(Adjustments)
SURROUND
SET UP
O MODE - Select Cable or TV. See
Installation section in manual.
O ANTENNA - Select ANT1 or ANT2. See
Installation section in manual.
1_ AUTO PROGRAM- Automatically program
channels having a signal into memory.
MANUAL PROGRAM - Manually add or
delete channels from memory.
£3 CC ON MUTE - Select Cl-C4 for Closed
Captioning display when the Remote
MUTE button is pressed.
O CC MODE - Select C1-C4 or T1-T4 for
Closed Captioning, program guides and
other information.
[] CONVERGENCE - Adjustment may be
required when the PTV is moved because
of the effects of the Earth's magnetic field
on the projection tubes.
AUDIO
O MODE - Select STEREO, SAP (Second
Audio Program) or MONO. (Use MONO
when stereo signal is weak.)
O BASS - Increase or decrease the bass
response.
[] TREBLE - Increase or decrease the treble
response.
O BALANCE Emphasize the left/right
speaker volume.
[] NORMAL - Reset BASS, TREBLE and
BALANCE to factory default.
£3 AI SOUND - Automatically adjust volume
to maintain a comfortable listening level.
(AI sound is not available in VIDEO mode).
[] SPATIALIZER ® Three dimensional
surround sound with two speakers.
IWl

ROLLER GUIDE MENU TM CHART Roller Guide Menu TM Chart (Cont.)
SPEAKERS
Jl.
TIMER
_3 ON - TV speakers operate normally.
0 OFF & VARIABLE AUDIO OUTPUT-
TV speakers off - audio adjustable by TV.
_3 OFF & FIXED AUDIO OUTPUT-
TV speakers off -- audio adjustable only
by the external amplifier,
C3 DOLBY CENTER MODE & FIXED AUDIO
OUT - TV speakers provide center
speakers for Dolby sound transmission
available on video or laser disc. (See
Installation section in manual.)
SLEEP
TIMER 1
TIMER 2
TIMER
_3 Set the time and the day of the week. (Time
will display onscreen after turning the
CLOCKSET television on, pressing the RECALL button
or changing channels).
[3 Set timer to turn off TV in 30, 60 or
90 minutes. Select NO to turn timer off.
OSet one or both timers to automatically turn
TV on and off at selected times, on
selected channels, and on selected days.
(Clock must be set to use Timer features.)
LOCK
LOCK
[3 Lock All, Channels or Game with asecret
MODE code.
{3 Select the period of time (12, 24, 48 hours
HOW LONG? or ALWAYS) for your option to be locked.
El

ROLLER GUIDE MENU TM CHART
Roller Guide Menu TM Chart (Cont.)
B
PICTURE
PICTURE
VIDEO ADJ.
(Adjustments)
OTHER ADJ.
(Adjustments)
0 COLOR - Adjust desired color intensity.
0 TINT- Adjust natural flesh tones.
{3 BRIGHTNESS - Adjust dark areas for crisp
detail.
g PICTURE - Adjust white areas of picture.
[] SHARPNESS - Adjust clarity of outline
detail.
{3 NORMAL- Reset all picture adjustments to
factory default settings.
O COLOR TEMP -Adjust white balance to
COOL (blue), WARM (red) or NORMAL.
[3 SCAN MODE - Picture adjustment when
switching between video games and TV
programs, if needed.
£3 COLOR MATRIX - Automatically adjusts
color parameters when watching digital
programming from DTV receiver-decoder.
CHANNELS
[] CHANNEL SCAN Select FAV (16
FAVORITES favorites) or ALL channels to scan
channels using the up/down CH buttons.
OPRESET CAPTION - Enter channel
numbers for preset captions.
£3 MANUAL CAPTION Enter channel
CAPTION numbers and captions manually.
{3 INPUT LABEL - Label video connectionsfor
on-screen displayofoptionalequipment.

SPECIAL FEATURES
Special Features
SET UP
Prog Chan (Program Channels)
In SET UP menu under PROG CHAN select:
[] MODE to select TV (antenna) or CABLE mode depending on the signal source.
[3 ANTENNA to select either ANT1 or ANT2.
[] AUTO PROGRAM to automatically program all channels with a signal.
MANUAL PROGRAM to manually add or delete channels.
:i_,MODE CABLE
ANTENNA ANT1
PROGRAM AUTO •
PROGRAM MANUAL •
(Closed Caption)
This television contains a built-in decoder that displays [_ (Closed Caption) text across the
screen (white or colored letters on black background). It allows the viewer to read the dialogue
of a television program or other information. The program viewed must include Closed
Captioning for the feature to work.
Mode
[] In SET UP Menu, select []_ (Closed Caption).
13 Select [C_ MODE.
[3 Select OFF, Cl, C2, T1, T2, C3, C4, T3 or T4:
OFF - When Closed Caption is not desired.
Ct - For video related information to be displayed, up to 4 lines onscreen at atime. (It
does not block relevant parts of the picture). Text may be in any language.
C2 to C4 - For other modes of video related information.
T1 - For program guide and other information to be displayed, when available.
(Blocks a large portion of the picture on the television screen).
T2 to T4 - For other modes of information. (Blocks a large portion of the picture on the
television screen).
[] Press ACTION to return to submenu options, and exit menus.
I_ On Mute
Activates the onscreen Closed Caption feature when the MUTE button on the remote control is
pressed.
Note: This feature only functions when the Closed Caption Mode is OFF The program being
viewedmustbe broadcast withClosed Captioning.(Refer toyour local TV guide).
[] In SET UP Menu, select [_ (Closed Caption),
OSelect _ON MUTE
[] Select NO, C1, C2, C3. or C4.
Recommended set up for Closed Caption when using the MUTE button:
[_ ON MUTE: C1
• [_ MODE: OFF
[3 Press ACTION to return to submenu options, and exit menus.
[] Press the MUTE button to activate the Closed Caption feature.
[] Press the MUTE button again to deactivate the feature.
Gi

SPECIAL FEATURES
Convergence
In SET UP menu, select CONVERGENCE under OTHER ADJ. only after moving the
PTV to adjust for the effects of the earth's magnetic field on the projection tubes.
IIL_Ltll
CONVERGENCE Ib
Note: Convergence seldom needsadjusting,except when movingthe PTV
Use the navigation buttons to align the horizontal and vertical green lines onscreen
with the outside reference marks, as shown below. Press the SWAP button to move to
the RED CONVERGENCE screen.
[_'iT_rJ=]3,Te']=l
rice Marks
Use the navigation buttons to align the red cross with the white cross pattern at the
center of the screen. Press SWAP to continue to the blue convergence adjustment
screen and repeat.
No_: TO PREVENT PICTURE TUBE DAMAGE. DO NOT LEAVE TEST PATTERN
ON FOR AN EXTENDED PERIOD OF TIME.
NI// Convergence Adjustment
An adjusted cross pattern appears white with a
minimum of color fringing.
El

SPECIAL FEATURES
TIMER Sleep
In TIMER menu, select SLEEP to turn TV off in 30, 60 or 90 minutes. Select NO to
turn off timer.
J[-i]I[I][q [41.",]11HOW LONG? 30
III_I_IilP]
Timer I and Timer 2
in TIMER menu, select one or both timers to turn the television on and offat selected
times, on selected channels, and on selected days,
Note: TIMEmustbe enteredin CLOCKSET tooperateTIMERfeatures,
DAY SAT
ON TIME
OFF TIME __:__
ENTERCHANNEL ---
The TV automatically turns OFF after 90 minutes
when turned on by the TIMER. If the OFF time is
selected or if a key is pressed, the automatic OFF
after 90 minutes will be cancelled.
The TIMER is active when the TV is OFF or ON.
The TV will switch to the selected channel at the
selected time set in the TIMER.
la

SPECIAL FEATURES
PICTURE Other Adjustments
In Picture menu under OTHER ADJ, select:
[3 COLOR TEMP to increase and decrease WARM (red) and COOL (blue) colors to suit
personal preferences.
£3 SCAN MODE to select TV or GAME to do picture adjustment when switching between
video games and TV programs,
_1 COLOR MATRIX to automatically adjust color parameters when watching digital
programming from DTV.STB receiver-decoder, Select SD when viewing a 480p signal,
Select HD when viewing a 480p signal in the 16:9 aspect ratio and the color does not look
normal.
Note: Usually the color matrix should be left in the SD position. Color matrix is only
adjustable in DTV mode,
NORMAL
_ ...... SCAN MODE TV
COLOR MATRIX SD
AUDIO
Dolby Center Mode & Fixed Audio Out
In AUDIO menu under SPEAKERS, select DOLBY CENTER MODE & FIXED AUDIO
OUT to operate TV speakers as center speakers for Dolby sound transmission, (See
Installation section in the manual.)
DOLBY CENTER MODE
& FIXED AUDIO OUT
[]

SPECIAL FEATURES
CHANNELS Favorites
In CHANNELS menu under FAVORITES select:
1-1 CHANNEL SCAN FAV to enter up to 16 favorite channels.
O CHANNEL SCAN ALL to scan all channels when using the CH up/down buttons.
CHANNEL SCAN FAV
ENTER CHANNEL 123
FAVORITE CHANNELS
Caption
In CHANNELS menu under CAPTION select:
£3 PRESET CAPTIONto enterchannelnumbersfor popular TV stations.
£3 MANUALCAPTIONtoenternumbersand captionsmanually.
OINPUTLABELtolabelvideoinputconnectionsforonscreendisplay.
PRESET CAPTION •
MANUAL CAPTION •
INPUT LABEL I_
[]