Paradigm Technology PTI-5020 User manual

PC2TV 0
Wireless PC2TV Adapter
User Manual

PC2TV 1
T
Ta ab bl le e o of f C Co on nt te en nt ts s
1. Overview...................................................................................2
2. Panel Descriptions..................................................................3
3. Hardware Setup.......................................................................4
4. Software Setup......................................................................10
5. Software Application.............................................................15
6. Troubleshooting Tips.............................................................21

PC2TV 2
1
1. . O Ov ve er rv vi ie ew w
1.1 Features:
The PC2TV Device is a video/graphics converter that enables you to turn any display (such as
a TV, monitor or projector) into an alternate screen for your desktop or laptop computer. It has its
own software that allows you to control viewing options, and configure settings so that future
viewing sessions are easy.
1.2 Package Contents
The PC2TV package contains the following items:
PC2TV Device Power Adapter Ethernet Cable Audio Cable
Video Cable Application CD Quick Setup Guide

PC2TV 3
2
2. . P Pa an ne el l D De es sc cr ri ip pt ti io on ns s
2.1 Back Panel:
The back panel of wireless PC2TV adapter contains ANTENNA,POWER,LINE OUT,VGA,WAN
and RESET button.
ANTENNA Wireless 802.11B/G
POWER +5V DC
LINE OUT Stereo out to TVAudio in
VGA VGA video out to TV or Projector
WAN Ethernet to Internet connection
RESET Restore to factory default setting
2.2 Front Panel:
The wireless PC2TV LED indicator display information about the device’s status.
POWER Red Light when device is powered on.
WLAN Green Light when wireless connection is established.

PC2TV 4
3
3. . H Ha ar rd dw wa ar re e S Se et tu up p
3.1 What You Need to Set Up PC2TV
 A Windows PC with:
 Windows XP SP2 (Home or Professional), Windows 2000 SP4 Professional, or Windows
Vista
 1.8 GHz Pentium processor or better ( a dual-core processor is recommended)
 512 MB RAM or more for Windows XP; 1024 MB RAM or more for Windows Vista.
 An wireless (802.11g or 802.11b) network adapter
 10MB free hard drive space
 TV, monitor, or projector with VGA Video out
 A CD-ROM drive for PC2TV software installation.
 Appropriate video/audio cable
 Wired or wireless Broadband (high speed Cable or DSL) Internet connection if Internet access
is desired.
3.2 Configuration Overview
The PC2TV always directly connects to the TV via VGA cables and the audio cable. Multiple
connection scenarios are possible for communication among the PC, the PC2TV device and the
Broadband Router. The PC2TV device can be connected to the Broadband Router via wireless or
wired Ethernet medium. The PC needs to have Internet access. For normal access to the Internet,
the PC typically connects to the Broadband Router via wireless or wired Ethernet medium.
For PC2TV sessions, the PC can have Internet access via:
1. Connection directly to the Broadband Router, or
2. Wirelessly, using the PC2TV device’s connection to the Broadband Router.
Four connection scenarios are possible:
Configuration A: The PC2TV device communicates with both the PC and the Broadband Router
wirelessly. During the PC2TV session, all transfers to and from the Internet take place via the
PC2TV device.

Configuration B: The PC2TV device communicates wirelessly with the PC and a wired Ethernet
connection with the Broadband Router. During the PC2TV session, all transfers to and from the
Internet take place via the PC2TV device.
Configuration C: Both the PC and the PC2TV device are connected to the Broadband Router via
wired Ethernet.The Broadband Router is responsible for all data transfers between the PC and the
PC2TV as well as between the PC and the Internet.
PC2TV 5

Configuration D: The PC wirelessly communicates with the PC2TV device and with the Broadband
Router via wired Ethernet. All transfers to and from the Internet take place via the Broadband
Router.
PC2TV 6

3.3 Attaching PC2TV Audio and Video to TV
1. Connect the audio cable to the PC2TV device’s Line Out port, and to the TV’s Audio in ports.
2. Connect a VGA cable to the appropriate VGA port on the PC2TV device.
3. Connect the other end of the cable to the appropriate VGA port (D-SUB) on the television,
projector or monitor
3.4 Attaching PC2TV Device to Network
1. If your broadband router is close to your PC2TV device, connect an Ethernet cable from an
available Ethernet port of the router to the WAN port of the PC2TV device. This connection can
be used for Configurations B & C mentioned previously in this guide.
 If you elect to configure your PC2TV device as previously described in Configuration A or
D, you need to make sure that the location of your PC and the Broadband Router allow
good wireless connection to the PC2TV device.
 During the initial launch of the PC2TV software application, you will be offered various
choices to set up your system in one of the four possible configurations, A through D.
PC2TV 7

2. To connect your PC2TV device wirelessly to the wireless router, go to Wireless Settings under
the Configuration Wizard, and select the wireless device from the list.
2
1
3
PC2TV 8

3.5 Attaching PC2TV Device to Power
1. Plug the power cord into the PC2TV device and power outlet.
2. You should see the following PC2TV welcome screen about a minute after powering up the
PC2TV device (you may have to change the TV input setting using the TV remote control).
3. The ID numbers displayed will be required to complete the installation.
PC2TV 9

PC2TV 10
4
4. . S So of ft tw wa ar re e S Se et tu up p
4.1 Installing PC2TV Software
1. Before you install the PC2TV software, remove any earlier version installed on your PC by
clicking on PC2TV Uninstall located under Windows Start -> All Programs.
2. Insert the PC2TV Software CD that came with the PC2TV device. Click “Utility Install “, and the
PC2TV Setup program should automatically start
3. The software will automatically start to install. When Installing Mirror Display driver, this will cause
a black screen to appear for a few seconds.

4. Click Reboot when the installation is complete. ( Windows 2000 )
Click Finish when the install is complete. ( Windows XP, Vista, Windows 7 )
5. When the software installation is complete, you should see the PC2TV icon in the Windows task
bar.
6. Click on PC2TV icon to launch the application and your computer screen should be
projecting on the television, projector or computer monitor.
PC2TV 11

4.1.1 Connecting PC2TV in Windows 7
If your system is Windows 7, please follow the procedures to connect PC2TV.
1. Click on PC2TV icon to launch the application.
2. Click “Yes” button to use your own wireless utility.
PC2TV 12
3. PC2TV Wireless Utility has been disabled. Please use Windows utility to connect to the
PC2TV device. Press “Done” to continue.

4. Double Click the Windows wireless utility and choose PC2TV-XXXX ( XXXX is the SSID in
your PC2TV device) to connect. Now it is connected.
5. Now the screen of your PC has been transferred to your TV. Check TV screen now.
PC2TV 13

6. Enter “Control panel Hardware and Sound Change system sounds”. Click playback tab
and select the Line 1- PC2TV Audio as Default Device. Press OK to finish.
4.2 Uninstalling PC2TV Software
1. Click Start and navigate to All Programs > PC2TV
2. Click Uninstall and the software removal process will begin.
3. When the un-installation process is finished, reboot your PC.
PC2TV 14

PC2TV 15
5
5. . S So of ft tw wa ar re e A Ap pp pl li ic ca at ti io on n
5.1 Configuring PC2TV Software
1. When the PC2TV software connects to the device for the very first time after initial installation,
it automatically launches the Configuration Wizard. The Configuration Wizard allows you to
select various options for Internet Connections as well as personal preferences and protection
settings such as user passwords and display access codes.
 You can also change your PC2TV settings using the PC2TV Configuration Wizard any
time you run the software subsequently.
2. The Configuration Wizard will guide you through a step-by-step process. Or to start the PC2TV
Configuration Wizard, click on the PC2TV icon on the Windows desktop. Click Device Settings ->
Wizard button, the Configuration Wizard will appear and guide you through the initial setup.
1
2

1. The Tutorial section (on the right of the screen) describes the settings available on that screen.
2. Click the Next or Back buttons at any time to move through the Configuration Wizard screens.
3. The following is a description of the Wizard screens:
 Conn Summary: shows cable connection, and allows you to select a different output.
 Password Setup: allows you to create a password to keep others from changing your
configuration. The Password restricts access to Advance and Internet Settings. Password
can be up to 32 characters in length.
 Device Settings: allows you to change the wireless device name broadcast by your
PC2TV device.
 Wireless Settings: allows you to select wired or wireless Internet connection, and to
enable secure wireless access by entering an encryption key.
 If your Broadband Router uses secure wireless communication, you need to use the
same key as the one in use by the Broadband Router in order to access the Internet
in Configuration A.
 If your configuration matches B, select “Connect to external networks using wired
Ethernet” option.
 If you are using Configuration C or D, select “None” as an option in Wireless Settings
window. In this case, all the Internet accesses take place directly between the PC
and the Broadband Router.
 Summary: displays summary of the selections made and connections between various
devices..
4. Click the Cancel button at the bottom of the screen to exit the Configuration Wizard at any time to
save any configuration changes you have made.
PC2TV 16

5.2 Starting and Stopping the PC2TV Software
1. Click on the PC2TV icon on the Windows desktop (or from Start/All Programs) – the application
automatically scans for PC2TV devices.
2. If only one PC2TV device is detected, connection between the PC and the PC2TV device will be
made automatically.
 The default is set for Connect via Wireless ID (Configurations A and B).
 If you want to connect over Ethernet instead, click on “Connect via Direct connect ID”, and
click on the Connect button.
 If multiple PC2TV devices are detected, the Wireless Display List is presented. Select the
device you want, and click on the Connect button. If your display is not shown on the list,
press the “Refresh” button until it appears.
 Once connected, it will display, “Connected to: PC2TV-xxxx” in the main application.
 To change from one PC2TV device to another, or to change between wired and wireless
connection with your PC, click on Select TV, which will bring up the PC2TV Display List.
 To stop the display and disconnect your PC from the PC2TV device, click on the “X”
button on the upper right corner of the PC2TV application window, and click on OK when
prompted.
PC2TV 17

5.3 Changing Video and Network Settings
1. The Main menu of the PC2TV application provides the following information about the PC2TV
connection:
 Connection Status – displays the name for the connected PC2TV device.
 PC2TV Logo – opens an About screen and displays Software and Firmware version
numbers.
 Signal Strength – four or more green bars indicate a strong wireless signal.
 Display Modes – changes the display mode.
 Video – select this when viewing a video. This provides high frame rate at lower
resolution.
 Photo – select this when viewing graphics or photos. This provides higher resolution at a
lower frame rate.
 Hide/Mute – select this when you want to mute the audio and display a blank screen.
 Extended View – allows you to configure settings. This is displayed by clicking on double
arrow symbol in the bottom left hand side of the main window. Figure below illustrates
Extended view screen.
PC2TV 18

2. Help [?] – launches separate Help window in each section.
3. General – Configuration Summary, Device Settings, Conn Summary.
 Summary – shows current setup information.
 Device Settings – allow you to change PC2TV ID and start Setup Wizard.
 Conn Summary – displays current video output selection and allows changes to the
video output.
4. Display Connection – wireless channel number.
 Wireless Channel – allows you to change channels. (*)
5. Internet Connection – wired or wireless network.
 TCP/IP menu is relevant if you would like to manually assign the IP address to your
PC2TV device. Selection of automatic assignment of IP address is recommended.
 Wireless Settings menu allows you to select configurations
6. Advanced – setup password, upgrade firmware or video quality settings.
 Password Setup – provides option to setup or change the password to prevent others
from changing setup configurations.
 Upgrade – allows upgrades to the latest software version.
 Video Settings – menu provides access to selecting video quality settings depending on
your system’s available bandwidth. If you choose to optimize for visual quality and the
network bandwidth is not sufficient, your video may occasionally appear jerky.
 Pan and Scan option is also available to view portions of your PC screen on the TV
PC2TV 19