Paragon Pro Tele-Tower 14-25 User manual

WARNING
Read and become familiar with this manual BEFORE operating unit.
Before operating this equipment, thoroughly read this set of instructions, make sure
you understand them, and only then follow the step-by-step directions. Failure to do
so could result in serious property damage and / or serious bodily injury.
© 2019 Paragon Pro Manufacturing Solutions All Rights Reserved.
O
P
E
R
A
T
O
R
’
S
M
A
N
U
A
L
Model 14-25 Swing Gate

To our valued customer,
Thank you for choosing a product by
Manufacturing Solutions. We are pleased that we are able to provide equipment to
make your work easier.
Our efforts are focused on producing the finest quality equipment of which we
are capable. We make sure to spend extra time and effort on our design and produc-
tion in order to reduce your time and effort spent using the product.
We take pride in providing the best for our customers. Quality, innovation, and
excellence are all qualities this company ensures. No product is sent without being
factory tested and inspected to ensure the highest quality for you.
It all began in 1972 when Roland Young designed our first product, the PANEL-
LIFT® Brand Drywall Lift, and revolutionized the drywall industry. To this day we are
continuously making advancments in manufacturing and design.
Thank you again for giving us the opportunity to work with you. Any questions
or comments that you have are always welcome.
Thank you for choosing a product by
Manufacturing Solutions. We are pleased that we are able to provide equipment to

USER COMPONENTS
AB
CDEFGHI
A: Safety Gate (x2)
B: Gate Spring (x2)
C: Gate Spring Mount (x2)
D: 1/4” NC Nylock Nut (x4)
E: 1/4” x 1’ 3/4” NC Bolt (x4)
F: Gate Catch Plate (x2)
G: 5/16” NC Nylock Nut (x4)
H: 5/16” x 2’ NC Bolt (x4)
I: Safety Gate Catch (x2)
Tools Required • 1/4” wrench
• 5/16” wrench
You will need two of each.

ASSEMBLY
1. Begin by lifting the TELE-TOWER’s top guardrail up and insert the Safety Gate through it as shown. Then set
the guardrail back into place.
2. Grab a Gate Spring and insert it into the square tubing at the bottom of the Safety Gate post, lining up the
holes.
3. Insert one 1/4” x 1’ 3/4” NC Bolt through the hole of the Square tube and Gate Spring. Secure with a 1/4” NC
Nylock nut and tighten with a 1/4” wrench.
4. Open the Safety Gate, and place one Gate Spring Mount into the top of the guardrail post.
1
5. The Gate Spring Mount’s Square Gate Spring pocket should be positioned outside of the Tele-Tower
walkway. Align the tabs on the Gate Spring Mount with the Safety Chain Mount ring and the opening on the
opposite side of the guardrail posts and push down on the Mount until it fits in.
6. Place the other 1/4” x 1’ 3/4” NC Bolt through the holes and secure with the 1/4” NC Nylock nut. Tighten with
a 1/4” wrench.
7. When you open your gate, the Gate Spring should be twisted as shown above.
8. Pull the Safety Gate behind the guardrail post and apply the Gate Catch Plate with the two 5/16” x 2’ NC Bolt
inserted.
2 3 4
5 6 7 8

9. Attach the safety Gate Catch to the inside of the Safety Gate and secure with the 5/16 NC Nylock Nuts.
10. The Safety Gate Catch can be positioned to match the Tele-Tower deck width... 19” or 22”. Make sure it is
positioned to fully engage the guardrail upright post.
11. Follow the same instructions to attach the second Swing Gate on the opposite end of the
Tele-Tower.
12. The gates can be installed to open either to the right or to the left by installing them on the opposite
Tele-Tower guardrail post and adjusting the twist of the square spring.
910 11 12
13
13. After you get both gates installed, your set up is complete.

SAFETY INFORMATION
This product contains trace amounts of the following items which are known to cause.
These chemicals are not hazerdous under product’s intended use.
Please review CAS# for more information.
Chemical Hazard CAS# % By Weight
Arsenic
Cadmium
Chromium
Ethylbenzene
Lead
Methanol
Methylene Chloride (Dichloromethane)
Nickel
Propylene glycol monobutyl ether
Toluene
Carbon Black
Cancer
Developmental
Cancer, Developmental
Cancer
Cancer
Developmental
Cancer
Cancer
Cancer
Developmental
Cancer
7440-38-2
7440-43-9
7440-47-3
100-41-4
7439-92-1
67-56-1
75-09-2
7440-02-0
5131-66-8
108-88-3
1333-86-4
Trace
Trace
Trace
Trace
Trace
Trace
Trace
Trace
Trace
Trace
Trace

PARAGON PRO MANUFACTURING SOLUTIONS INC
LIMITED WARRANTY
TELPRO INC products manufactured by PARAGON PRO MANUFACTURING SOLUTIONS INC are warranted to be
free from defects in material and workmanship under normal use for one year from date of purchase.
If a TELPRO INC product is proven to be defective in material or workmanship within the covered time frame
from the date of purchase, return the defective part to PARAGON PRO MANUFACTURING SOLUTIONS INC and
we will either repair or replace the part at our option. We will neither assume nor authorize any other person
to assume for us any other liability.
Written notice including commercial invoice detailing the nature of the defect, date of purchase, and the
company from which you purchased your unit must be received and acknowledged by PARAGON PRO MANU-
FACTURING SOLUTIONS INC before any units may be returned. Shipping costs shall be the responsibility of the
product purchaser.
This warranty shall not apply to any equipment that has been repaired or altered outside of the factory in any
way so as in our judgment to aect its stability or reliability nor which has been subjected to abuse, misuse, or
negligence.
PARAGON PRO MANUFACTURING SOLUTIONS INC reserves the right to make changes or improvements in
design without incurring obligation to install the same on previous units.
PARAGON PRO MANUFACTURING SOLUTIONS INC shall not be liable for loss, damage, or expense directly or
indirectly from use of its products, their transportation, their repair, or from any other cause. Acceptance of
the manufacturer’s product constitutes agreement to the terms of this warranty and further that the manufac-
turer shall have no liability for any special or consequential damages.
This Warranty is in lieu of all warranties express or implied.
Fill in the following information, attach a copy of your sales receipt or invoice and le in a safe place.
Date of purchase: __________/__________/___________
Name& model# _______________________________________________________________________
Serial #: __________________________________________
NOTE: The following components of the PANELLIFT® Model 439 Drywall Lift are warranted to be free from
defects in material and workmanship under normal use for three years from date of purchase.
Part# Description
52-03 #35 chain assembly 52-05 #40 chain assembly
52-07 #50 chain assembly 52-09 1 1/4” #50 roller assembly
52-10 #Outer planet set w/ bronze 52-11 Drive assembly
52-11 #1/2” x 2 1/4”Shoulder bolt w/ fastners 52-15 Clutch assembly w/sprocket
52-16 #40 Winch drive chain
WARRANTY

Questionsabout assembly?
Can’t find a part?
Need some other help?
Call us:
1.800.448.0822
701.775.0551
We’ll get you set up!
W
W
W
W
e
’ll get
W
e
WeW
e
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
y
’ll get
’ll get
’ll get
ou set up!
y
ou set up!
y
y
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
W
W
W
W
W
W
W
W
W
e
’ll get
e
W
e
WeW
e
’ll get
e
W
e
WeW
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
’ll get
y
’ll get
’ll get
y
’ll get
’ll get
’ll get
ou set up!
y
ou set up!
y
ou set up!
y
ou set up!
y
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!
ou set up!