Paramont PAR 4MP Series User manual

Paramont Cameras
User Manual: PAR 4MP Series

Notes on Safety
This product is intended to be supplied by a Listed Power Unit, marked with 'Limited
Power Source', 'LPS' on unit, output rated minimum 12V/2 Aor POE 48V/ 350mAor
AC24V (depending on models), no more than 2000m altitude of operation and Tma=60
Deg.C.
As for the modes with PoE function, the function of the ITE being investigated to IEC
60950-1 standard is considered not likely to require connection to an Ethernet network
with outside plant routing, including campus environment and the ITE is to be
connected only to PoE networks without routing to the outside plant.
Do not attempt to disassemble the camera; in order to prevent electric shock, do not
remove screws or covers.
There are no user-serviceable parts inside. Please contact the nearest service center as
soon as possible if there is any failure.
Avoid from incorrect operation, shock vibration, heavy pressing which can cause
damage to product.
Do not use corrosive detergent to clean main body of the camera. If necessary, please
use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any
cleanser for high grade furniture is applicable.
Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this
may damage the image sensor.
Please follow the instructions to install the camera. Do not reverse the camera, or the
reversing image will be received.
Do not operate it in case temperature, humidity and power supply are beyond the limited
stipulations.
Keep away from heat sources such as radiators, heat registers, stove, etc.
Do not expose the product to the direct airflow from an air conditioner.
This manual is for using and managing the product. We may reserve the rights of
amending the typographical errors, inconsistencies with the latest version, software
upgrades and product improvements, interpretation and modification. These changes
will be published in the latest version without special notification.
All pictures, charts, images in this manual are only for description and explanation of
our products. The ownerships of trademarks, logos and other intellectual properties
related to Microsoft,Apple and Google belong to the above-mentioned companies.
This manual is suitable for active deterrence network cameras.

Disclaimer
With regard to the product with internet access, the use of product shall be wholly at your
own risks. Our company shall be irresponsible for abnormal operation, privacy leakage or
other damages resulting from cyber attack, hacker attack, virus inspection, or other internet
security risks; however, Our company will provide timely technical support if necessary.
Surveillance laws vary from country to country. Check all laws in your local region before
using this product for surveillance purposes. We shall not take the responsibility for any
consequences resulting from illegal operations.
Cybersecurity Recommendations
Use a strong password. At least 8 characters or a combination of characters, numbers, and
upper and lower case letters should be used in your password.
Regularly change the passwords of your devices to ensure that only authorized users can
access the system (recommended time is 90 days).
It is recommended to change the service default ports (like HTTP-80, HTTPS-443, etc.) to
reduce the risk of outsiders being able to access.
It is recommended to set the firewall of your router. But note that some important ports
cannot be closed (like HTTP port, HTTPS port, Data Port).
It is not recommended to expose the device to the public network. When it is necessary to
be exposed to the public network, please set the external hardware firewall and the
corresponding firewall policy.
It is not recommended to use the v1 and v2 functions of SNMP.
In order to enhance the security of WEB client access, please create a TLS certificate to
enable HTTPS.
Use black and white list to filter the IP address. This will prevent everyone, except those
specified IP addresses from accessing the system.
If you add multiple users, please limit functions of guest accounts.
If you enable UPnP, it will automatically try to forward ports in your router or modem. It
is really very convenient for users, but this will increase the risk of data leakage when the
system automatically forwards ports. Disabling UPnP is recommended when the function is
not used in real applications.
Check the log. If you want to know whether your device has been accessed by
unauthorized users or not, you can check the log. The system log will show you which IP
addresses were used to log in your system and what was accessed.

Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
1. FCC compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
2. FCC conditions:
This device complies with part 15 of the FCC Rules. Operation of this product is subject
the following two conditions:
This device may not cause harmful interface.
This device must accept any interference received, including interference that may cause
undesired operation.
CE Information
The products have been manufactured to comply with the following directives.
EMC Directive 2014/30/EU
RoHS
The products have been designed and manufactured in accordance with Directive EU RoHS
Directive 2011/65/EU and its amendment Directive EU 2015/863 on the restriction of the use
of certain hazardous substances in electrical and electronic equipment.

2012/19/EU (WEEE directive): The Directive on waste electrical and electronic
equipment (WEEE Directive). To improve the environmental management of
WEEE, the improvement of collection, treatment and recycling of electronics at
the end of their life is essential. Therefore, the product marked with this symbol
must be disposed of in a responsible manner.
Directive 94/62/EC: The Directive aims at the management of packaging and packaging
waste and environmental protection. The packaging and packaging waste of the product in
this manual refers to must be disposed of at designated collection points for proper recycling
and environmental protection.
REACH(EC1907/2006): REACH concerns the Registration, Evaluation, Authorization and
Restriction of Chemicals, which aims to ensure a high level of protection of human health and
the environment through better and earlier identification of the intrinsic properties of chemical
substances. The product in this manual refers to conforms to the rules and regulations of
REACH. For more information of REACH, please refer to DG GROWTH or ECHAwebsites.

Table of Contents
1Introduction ...................................................................................................................1
2Network Connection......................................................................................................2
2.1 LAN........................................................................................................................2
2.1.1 Access through IP-Tool ............................................................................2
2.1.2 Directly Access through IE.......................................................................4
2.2 WAN.......................................................................................................................5
3Live View........................................................................................................................8
4Network Camera Configuration.................................................................................10
4.1 System Configuration...........................................................................................10
4.1.1 Basic Information ...................................................................................10
4.1.2 Date and Time ........................................................................................10
4.1.3 Local Config........................................................................................... 11
4.1.4 Storage.................................................................................................... 11
4.2 Image Configuration.............................................................................................14
4.2.1 Display Configuration ............................................................................14
4.2.2 Video / Audio Configuration..................................................................16
4.2.3 OSD Configuration.................................................................................17
4.2.4 Video Mask ............................................................................................18
4.2.5 ROI Configuration..................................................................................19
4.2.6 Lens Control...........................................................................................20
4.3 Alarm Configuration ............................................................................................21
4.3.1 Motion Detection....................................................................................21
4.3.2 Other Alarms ..........................................................................................22
4.3.3 Alarm In .................................................................................................24
4.3.4 Alarm Out...............................................................................................26
4.3.5 Alarm Server ..........................................................................................27
4.3.6 Audio Alarm...........................................................................................27
4.3.7 Light Alarm............................................................................................28
4.4 Event Configuration .............................................................................................28
4.4.1 Exception................................................................................................29
4.4.2 Line Crossing..........................................................................................30
4.4.3 Intrusion..................................................................................................32
4.4.4 Region Entrance .....................................................................................34
4.4.5 Region Exiting........................................................................................36
4.5 Network Configuration.........................................................................................38
4.5.1 TCP/IP....................................................................................................38
4.5.2 Port.........................................................................................................39
4.5.3 Server Configuration ..............................................................................40
4.5.4 DDNS.....................................................................................................40
4.5.5 SNMP.....................................................................................................41

Network Camera User Manual
4.5.6 802.1x.....................................................................................................43
4.5.7 RTSP.......................................................................................................43
4.5.8 UPNP......................................................................................................44
4.5.9 Email ......................................................................................................44
4.5.10 FTP.........................................................................................................45
4.5.11 HTTPS....................................................................................................46
4.5.12 QoS.........................................................................................................47
4.6 Security Configuration .........................................................................................48
4.6.1 User Configuration.................................................................................48
4.6.2 Online User.............................................................................................49
4.6.3 Block and Allow Lists ............................................................................50
4.6.4 Security Management.............................................................................50
4.7 Maintenance Configuration..................................................................................51
4.7.1 Backup and Restore................................................................................51
4.7.2 Reboot ....................................................................................................51
4.7.3 Upgrade..................................................................................................52
4.7.4 Operation Log.........................................................................................52
5Search ...........................................................................................................................53
5.1 Image Search........................................................................................................53
5.2 Video Search.........................................................................................................55
5.2.1 Local Video Search.................................................................................55
5.2.2 SD Card Video Search............................................................................56
Appendix................................................................................................................................59
Appendix 1 Troubleshooting ................................................................................................59

1
Network Camera User Manual
1Introduction
Main Features
Max. resolution : 2592×1520@30fps/25fps
ICR auto switch, true day/night
3D DNR, true WDR
ROI coding
Video exception detection, intrusion detection (human/vehicle classification), line
crossing detection (human/vehicle classification), region entrance detection (human/vehicle
classification), region exiting detection (human/vehicle classification), light and sound alarm
Support BLC, Defog, Anti-flicker, smart IR, etc.
Support mobile surveillance by smart phones with iOS and Android OS
Surveillance Application

2
Network Camera User Manual
2Network Connection
Connect IP-Cam via LAN or WAN. Here only take IE browser for example. The details are as
follows:
2.1 LAN
In LAN, there are two ways to access IP-Cam: 1. access through IP-Tool; 2. directly access
through IE browser.
2.1.1 Access through IP-Tool
Network connection:
①Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the
PC from the CD.
②Double click the IP-Tool icon on the desktop to run this software as shown below:
③Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
information of the camera listed in the above table to show the network information on the
right hand. Modify the IP address and gateway of the camera and make sure its network
address is in the same local network segment as the computer’s. Please modify the IP address
of your device according to the practical situation.

3
Network Camera User Manual
For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera
shall be changed to 192.168.1.X. After modification, please enter the password of the
administrator and click the “Modify” button to modify the setting.

④Double click the IP address and then the system will pop up the IE browser to connect
IP-CAM. Follow directions to download, install and run theActive X control.
Enter the username and password in the login window to log in.

The default password of the administrator is “123456”.
The default username is “admin”; the default password is “123456”.