8
COPY FILES TO A COMPUTER
Connect the camera to computer using a micro USB x USB cable.
The camera turns on automatically and a dialog box on the camera display asks if the camera is
Mass Storage or a PC Camera. Highlight Mass Storage and press the OK button. A blue interface
with the words Mass Storage appears on the camera.
Alternative Method: Remove the memory card and insert it into a card reader connected to your
computer.
With either method follow the procedures you normally use to download videos and photos.
Files would not be automatically deleted after copied to a computer.
DELETE VIDEOS AND PHOTOS
To delete selected videos and photos except the protected videos, use one of the following two
methods:
a. In Playback mode navigate to a specific video or photo. Long press the Up button.
b. A Delete dialog box appears with “Delete Current?”, “Delete All?” and “Cancel”.
c. Select “Delete Current?”. When prompted to “Erase This?”, select “OK”.
a. In Playback mode, navigate to the specific video or photo which you want to delete.
b. Press the Mode button to advance to the Setup menu.
c. Highlight Delete on page 6 of the Setup menu and press the OK button.
d. A Delete dialog box appears with “Delete Current?” and “Delete All?”
e. Highlight “Delete Current?” and press the OK button.
f. When prompted to “Erase This?”, highlight “OK” then press the OK button.
To delete all videos and photos except protected videos, use one of the following two methods:
a. In Playback mode navigate to a specific video or photo. Long press the Up button.
b. A Delete dialog box appears with “Delete Current?”, “Delete All?” and “Cancel”.
c. Select “Delete All?”. When prompted to “Erase All Images?”, select “OK”.
a. Press the Mode button until the Setup menu appears on the display.
b. Highlight Delete on page 6 of the Setup menu and press the OK button.
c. A Delete dialog box appears with “Delete Current?” and “Delete All?”
d. Highlight “Delete All?” and press the OK button.
e. When prompted to “Erase All Images?”, highlight “OK” and press the OK button.
To delete all videos and photos including protected videos, use the following method.
a. Press the Mode button until the Setup menu appears on the screen.
b. Highlight Format on page 6 of the Setup menu and press the OK button.
c. In response to “All data will be deleted”, highlight “OK” and press the OK button.
Alternative method: To delete some or all videos and photos including protected videos, remove
the memory card and insert it into a memory card reader connected to your computer. Select and
delete files as you did normally on your computer. You can also use your computer to format the
card to delete all files.
UPGRADE FIRMWARE
Connect the camera to you computer and choose “Mass Storage”option. Format the micro SD
Card.
Copy the firmware file(s) (.bin) onto the root of the micro SD Card.
Eject and disconnect from the computer.
Connect the camera with charger. The camera will be upgraded automatically. Wait about few
minutes and it will turn on automatically after finishing the upgrade.
After the firmware upgrade is complete, be sure to delete the files or you will be prompted to
upgrade again.
