PKSA 20-Li A1 GB│IE│NI│CY │ 1 ■
Contents
Introduction......................2
Intended use............................2
Hazard levels ...........................2
Features ...............................3
Package contents ........................3
Technical specifications ...................3
General power tool safety warnings . 5
1. Work area safety......................5
2. Electrical safety .......................5
3. Personal safety........................6
4. Power tool use and care ................6
5. Use and handling of the cordless electrical
powertool..........................7
6. Service ..............................7
Original accessories/auxiliary equipment .....7
Safety instructions for chainsaws ....8
General power tool safety warnings .........8
Precautions against kickback ...............9
Personal protective equipment (PPE) ....... 10
Storage and transportation .............. 10
Environmental safety. . . . . . . . . . . . . . . . . . . . 11
Vibrations ............................ 11
Safety guidelines for battery chargers ...... 11
Before use ......................12
Charging the battery pack (see fig. A)...... 13
Attaching/disconnecting the battery pack to/from
the tool .............................. 13
Checking the battery charge level ......... 13
Adding chain oil....................... 13
Tightening and checking the saw chain ..... 14
Use ............................14
Switching on and off ................... 14
Checking and adjusting the chain lubrication 14
Checking the chain brake................ 15
Basic working procedures when felling
trees...........................15
Preparing the kerf (see fold-out page, fig. E) . 16
Branchremoval ....................... 16
Working with wood that is under tension.... 16
Kickback (see fold-out page, fig. F) ........ 17
Drawing in (see fold-out page, fig. G) ...... 17
Working safely ........................ 17
Cleaning and maintenance ........17
Cleaning the tool ...................... 17
Cleaning the chain drive ................ 18
Maintaining the chain lubrication.......... 18
Maintaining the guide rail ............... 18
Fitting the guide rail and tensioning the saw chain 18
Sharpening and caring for the saw chain . . . 19
Maintenance intervals ............20
Ordering replacement parts .......20
Storage and transportation........21
Kompernass Handels GmbH warranty 21
Service .........................22
Importer .......................22
Disposal........................23
Translation of the original
Conformity Declaration ...........24
Ordering replacement batteries ....25
Telephone ordering .................... 25
