parktool PRS-20 User manual

Park Tool Co. 5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com
24
19
20
22
23
Lock
Open
1
3
2
8
9
16
5
14
15
17
18
6
13
10
11
6
12
PRS-20, PRS-21
Team Race Stand
The PRS-20 Team Race Stand and PRS-21
Super LiteTeam Race Stand are compact,
folding workstands that securely hold the
bike without clamping the frame tubes
or seat post. Used by professional race
mechanics around the world.
Assembly
1 2
3 4 5
6 7 8

Mounting Bike in PRS-20 / PRS-21
Lock
Unlock
Folding for Storage
Unfolding for Use
Pull
Hitch
Pin
Lock
Open
Pull
Hitch
Pin
Lock
Open
1
2 3 4
1 2 3
4

Park Tool Co. 5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com
25
21
22
20
23
24
23
26
24
25
24
23
5
25
1
5
2
3
1
2
4
6
7
8
10
6
18
11
12
9
13
19
17
16
15
14
Converts any PRS-20, PRS-21 or PRS-23
to accept 15mm and 20mm thru axle
wheeled bikes
1728-TA Sliding Thru Axle Adaptor
Optional Accessories for PRS-20/21 Team Race Stand
Keeps tools, lubes and parts right
at your fingertips.
106 Tool Tray
PRS-20, PRS-21
Team Race Stand

Park Tool Co. 5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com
© 2013 ParkTool Co. / PARKTOOL® and the color BLUE are registered trademarks of ParkTool Co.
Note: Washers should be used as required to account for variations in casting taper.
Part No. Description Qty.
1729A Front Quick Release Assembly 1
1722A Rear Quick Release Assembly 1
1728 Slider Tube Weldment 1
1721 Slider Rear Axle Extension 1
1706-2 Knob and Shaft 2
1715-2 Horizontal Beam End Cap 2
1716R Horizontal Beam Tube (PRS-20 only) 1
1734R Aluminum Horizontal Beam Tube (PRS-21 only) 1
1257-2 Saddle Button Head Socket Cap Screw 1/4 - 20 x 3/8” 2
1711R Bottom Bracket Saddle 1
1283X Pivot Button Head Socket Cap Screw M10 x 50 1
1723 Hitch Pin 1
1724-2 Bracket Washer 2
1285X Pivot Screw Nylok Nut 1
1709L Left Upright Bracket 1
1709R Right Upright Bracket 1
1709S Buckle & Strap Assembly 1
290 Nylok Nut 2
1709-2 Upright Bracket Bolt 2
1708 Upright Tube (PRS-20 only) 1
1733 Aluminum Upright Tube (PRS-21 only) 1
1707.2 Clamping Collar Quick Release Assembly 1
1701 Upright Sleeve 1
1705 Yoke Weldment (PRS-21 only) 1
1705-20 Yoke Weldment (PRS-20 only) 1
479-6 Leg Bolt 1/4 - 20 x 2” 3
1700-3 LegTube (PRS-20 only) 3
1732-3 Aluminum Leg Tube (PRS-21 only) 3
1780-2 Leg Cap 3
480-6 Leg Nylok Nut 1/4 - 20” 3
1
2
3
4
5
6
7
7
8
9
10
11
12
13
14
15
16
17
18
19
19
20
21
22
22
23
24
24
25
26
PRS-20, PRS-21
Team Race Stand