Parmigiani Fleurier Tonda PF GMT Rattrapante User manual

Tonda PF GMT Rattrapante
PF051

indications - TONDA GMT rattrapante 905
1
2

3
Tonda PF GMT Rattrapante
PF051
INDICATIONS
1. Local time zone hour, minutes
2. Home time zone hours

remontage - TONDA GMT rattrapante 905
counterclockwise clockwise

5
Tonda PF GMT Rattrapante
PF051
WINDING
Your watch automatically self-winds when you wear it. To become fully wound,
it must be worn for at least 12 hours. This may vary depending on the type
of user. If the watch is completely unwound, the crown will have to be turned
approximately 15 times; this properly activates the mechanism. Note: the
number of crown turns required to completely wind a watch varies depending
on the caliber. Winding by the crown can be done at any time. When it is
stopped due to an insufcient charge, it must be rewound. For this watch:
1. Turn the crown a few times clockwise to wind your watch.
Winding by the crown can be done at any time.

mise à l’heure - TONDA GMT rattrapante 905
13 2
counterclockwise clockwise

7
Tonda PF GMT Rattrapante
PF051
SETTING THE TIME
1. Pull the crown out one notch.
2. Turn the crown anti-clockwise to the desired time (turning the hands clockwise).
3. Push the crown back to the initial position.

rattrapante - TONDA GMT rattrapante 905
B
A

9
Tonda PF GMT Rattrapante
PF051
GMT RATTRAPANTE (SPLIT TIME)
Description of the push-buttons
A.Local time adjustment push-button
B.Home time zone (reference time) push-button
1. Press push-button A as many times as necessary to reach the desired local
time. Each press shifts the local hour hand by one hour relative to the home
time hour hand.
2. Pressing push-button B brings the local hour hand back to the home hour
hand.
Caution!
Never press push-pieces A and B simultaneously.

PARMIGIANI.COM