
5
Tonda PF Xiali Calendar
PF008
WINDING
Your watch is wound automatically when worn on your wrist. It is important to
emphasise that in order to obtain the full power reserve, the watch must be on the
wrist for at least twelve hours. This gure may vary depending on the type of user.
Furthermore, if the watch power reserve is completely exhausted, you will need
to turn the crown through about fteen rotations; this will activate the mechanism
properly before you put on the watch. Note that the number of crown rotations
equating to fully winding a watch varies depending on the calibre. If it has stopped,
you will need to wind it. To do so:
1. Unscrew the crown by turning it anti-clockwise until it is released.
2. Turn the crown through a few rotations clockwise to wind your watch.
3. Press the crown against the case while screwing the crown back in.
The watch can be wound using the crown at any time.