Pebblebee CARD PB-621-B User manual
CARD
Rechargeable lithium polymer battery, lasts up to 12 months per
charge. The Apple Find My™ network provides an easy, secure
way to locate compatible personal items using the Find My™ app
on your iPhone®, iPad®, Mac®, iPod touch®, or the Find Items app
on Apple Watch®. To use the Find My app to locate this item, the
latest version of iOS®, iPadOS®, or macOS® is recommended. The
Find Items app on Apple Watch® requires the latest version of
watchOS®. Apple Find My, Apple Watch, Find My, iPhone, iPad,
iPadOS, iPod touch, Mac, macOS and watchOS are trademarks of
Apple Inc. IOS is a trademark of Cisco and is used under license.
MODEL NO. PB-621-B
FCC ID: 2AG5OPB-621-B
@pebblebee
IC Bluetooth SIG certified
pebblebee.com
Use and care
Please ensure proper operations of your Card device.
Your Card is splash resistant. This means that it’s
safe for water splashes. To preserve your device’s
life, we do not recommend submerging it in water.
Keep the Card stored and operating in temperatures
listed below. Avoid freezing weather and extremely
hot temperatures to ensure best functionality.
Make sure that device is dry before charging it.
Charging the device when it’s wet voids warranty.
Pebblebee offers a 1 year limited waranty against
product defects, effective from the time of delivery.
Product defects do not include those resulting from
accident, water damage, product modification, or
failure to follow instructions for use. If Pebblebee
deems the product defective, Pebblebee will replace
the device upon receipt.
believe your device to be defective. Our support team
can identify and resolve most issues and will be
happy to provide exchange directions for devices that
fall within the warranty.
When your device reaches the end of their useful life,
please dispose of at your local e-waste center to be
recycled and properly discarded, ensuring protection
of our environment. Contact your local authorities to
find a reputable and certified e-waste center near
you.
Water Resistance
Environmental Requirements
Operating temp: 5 °F to 11 °F (-15 °C to 43 °C)
Storage temp: -1+ °F to 130 °F (-23 °C to 54 °C)
67
8
9
Location Services
Bluetooth
Apple Find My network
Mobile Compatibility
Requires Bluetooth 4.0 and up.
To use the Find My app to locate this item, the latest
version of iOS®, iPadOS®, or macOS® is recommen-
ded. The Find Items app on Apple Watch® requires
the latest version of watchOS®.
To use the Pebblebee app, we recommend using the
latest version of iOS or Android.
For more instructions please visit:
help.pebblebee.com
Limited warranty
Safe electronical disposal
Power
Proprietary contact charging
Weigth / Dimensions
0.5 oz ( 15 grams)
2.12” x 3.35” x 0.11” (54 mm x 85 mm x 2.8 mm)
Specs Regulatory & safety information
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government. The
exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC/IC is 1.6W/kg. For body worn operation, this
device has been tested and meets RF exposure guidelines when use
with an accessary that contains no metal.
Use of other accessories may not ensure compliance with RF exposure
guidelines. The 5mm minimum separation distance between the body
and this device should be maintained during the operation to ensure
the compliance of RF exposure guidelines.
FCC RF Exposure Information (SAR)FCC Compliance Statement
10
Industry Canada Compliance Statement
This device complies with Industry Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
(1)l’appareil ne doit pas produire de brouillage;
(2)l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in
section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users
can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation
dans la section 2.5 de RSS 102 et la conformité à l’exposition de
RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur
l’exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. The highest reported SAR value
for this device is 0.413 W/Kg, 5mm which is less than the SAR limit 1.6
W/kg set by the Industry Canada.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même
temps qu’aucune autre antenne ou émetteur. La valeur DAS la plus
élevée rapportée pour cet appareil est de 0.413 W /kg à 5 mm, ce qui est
inférieur à la limite DAS de 1,6 W / kg établie par Industrie Canada.
Thin Rechargeable Item Finder
Ultimate tracker for wallets or narrow spaces
CARD
IC: 23453-PB621B
™
RECHARGEABLE
UP TO 12 MONTHS PER CHARGE
Thanks for choosing Pebblebee. Now that you’ve
received your Card you can join millions of users
worldwide in tracking your valuables.
We hope that you will enjoy the peace of mind
that the Pebblebee Card brings.
WELCOME TO THE PEBBLEBEE FAMILY
Works with Apple Find My™
Rechargeable battery
Splash resistant
Loud melody
Track location
Left Behind™ alert
CARD
Your new Card is rechargeable with the included
magnetic charger. Please ensure your Card is fully
charged before first use.
How to charge your Pebblebee Card
1. Plug USB end into a power adapter or a USB port,
such as your laptop.
2. Place the magnetic charger on top of the pins on
the back of the card (see picture below).
3. The LEDs on the Card will pulsate when charging
and illuminate a solid light when it’s fully charged.
Note: The battery cannot be removed. The Card includes a rechargeable
battery that is not replaceable. Opening or tampering with the device
voids warranty.
Charge your card Works with Apple Find My
Pebblebee Card works with the Apple Find My
network. With hundreds of millions of Apple devices
around the world, advanced end-to-end encryption,
and industry leading security, the Find My network
lets users easily locate their belongings in the Find
My app with the peace of mind that their privacy is
protected.
To set up Card in the Find My app:
1. Double-press the Pebblebee logo on the front of
the Card. You’ll hear a confirmation sound.
2. Open the Find My app on your iPhone or iPad and
tap +.
3. Next tap “Add Other Item ” and follow the
instructions displayed in the app.
1. PLEASE NOTE: If you chose the Pebblebee App to
claim your Card, you will not have access to the
Apple Find My network.
If you want to give your Card to a new owner to claim
it, or if you would like to switch between the Apple
Find My network and the Pebblebee network you will
need to factory reset your Card with the following
instructions:
At Pebblebee we create technology for peace of
mind. We are focused on designing devices that
makes your life easier. We hold a range of products
that includes key trackers, pet trackers, and devices
that use Bluetooth, GPS and cellular connectivity to
keep track of your valuables.
Scan to get 10% discount
on your next order!
Check out our products on pebblebee.com
Pebblebee Card can be used with the Apple
Find My network OR the Pebblebee App on
Google Play® and App Store®. Using the Apple
Find My network, prohibits the use of the
Pebblebee App, and vice versa. You may not
operate simultaneously on the Apple Find My
network and Pebblebee network. In order to
change networks, you must reset the device to
factory settings.
Learn more at: pebblebee.com/card
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of
this device or use of this product or its compliance with safety and regulatory
standards.
1. Navigate to the item page on the Find My app.
2. Scroll to the bottom.
3. Tap ”Remove item”, then ”Remove”.
Set up Card in the Find My app
How to remove item from the Find My app
2. Download the free Pebblebee App for your Android
or iOS phone and follow the in-app instructions.
3. Make sure that your phone’s Bluetooth is enabled
and that you’ve shared location permissions with the
Pebblebee app. If you have any more questions,
check out our setup guide on help.pebblebee.com.
4. Allow the Pebblebee app to always access your
location. This is needed to allow the app to locate
your valuables at all time. In case you lose your
items, the App will notify you of the last known
location.
5. Place the Card in your wallet or any other thing.
Works with Pebblebee App Factory resetting your Card
123 4
How to disable FindMy
5
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Press the button three times. Press again and hold, then
release during the third beep.
3. Audible confirmation will sound.
This will reset the device and allow you to use it with
either the Apple Find My network OR the Pebblebee
App.
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Double press the button. Press again and hold, then release
during the second beep.
3. Audible confirmation will sound.
4. This will stop sharing the location of this item.
Thanks for choosing Pebblebee. Now that you’ve
received your Card you can join millions of users
worldwide in tracking your valuables.
We hope that you will enjoy the peace of mind
that the Pebblebee Card brings.
WELCOME TO THE PEBBLEBEE FAMILY
Works with Apple Find My™
Rechargeable battery
Splash resistant
Loud melody
Track location
Left Behind™ alert
CARD
Your new Card is rechargeable with the included
magnetic charger. Please ensure your Card is fully
charged before first use.
How to charge your Pebblebee Card
1. Plug USB end into a power adapter or a USB port,
such as your laptop.
2. Place the magnetic charger on top of the pins on
the back of the card (see picture below).
3. The LEDs on the Card will pulsate when charging
and illuminate a solid light when it’s fully charged.
Note: The battery cannot be removed. The Card includes a rechargeable
battery that is not replaceable. Opening or tampering with the device
voids warranty.
Charge your card Works with Apple Find My
Pebblebee Card works with the Apple Find My
network. With hundreds of millions of Apple devices
around the world, advanced end-to-end encryption,
and industry leading security, the Find My network
lets users easily locate their belongings in the Find
My app with the peace of mind that their privacy is
protected.
To set up Card in the Find My app:
1. Double-press the Pebblebee logo on the front of
the Card. You’ll hear a confirmation sound.
2. Open the Find My app on your iPhone or iPad and
tap +.
3. Next tap “Add Other Item ” and follow the
instructions displayed in the app.
1. PLEASE NOTE: If you chose the Pebblebee App to
claim your Card, you will not have access to the
Apple Find My network.
If you want to give your Card to a new owner to claim
it, or if you would like to switch between the Apple
Find My network and the Pebblebee network you will
need to factory reset your Card with the following
instructions:
At Pebblebee we create technology for peace of
mind. We are focused on designing devices that
makes your life easier. We hold a range of products
that includes key trackers, pet trackers, and devices
that use Bluetooth, GPS and cellular connectivity to
keep track of your valuables.
Scan to get 10% discount
on your next order!
Check out our products on pebblebee.com
Pebblebee Card can be used with the Apple
Find My network OR the Pebblebee App on
Google Play® and App Store®. Using the Apple
Find My network, prohibits the use of the
Pebblebee App, and vice versa. You may not
operate simultaneously on the Apple Find My
network and Pebblebee network. In order to
change networks, you must reset the device to
factory settings.
Learn more at: pebblebee.com/card
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of
this device or use of this product or its compliance with safety and regulatory
standards.
1. Navigate to the item page on the Find My app.
2. Scroll to the bottom.
3. Tap ”Remove item”, then ”Remove”.
Set up Card in the Find My app
How to remove item from the Find My app
2. Download the free Pebblebee App for your Android
or iOS phone and follow the in-app instructions.
3. Make sure that your phone’s Bluetooth is enabled
and that you’ve shared location permissions with the
Pebblebee app. If you have any more questions,
check out our setup guide on help.pebblebee.com.
4. Allow the Pebblebee app to always access your
location. This is needed to allow the app to locate
your valuables at all time. In case you lose your
items, the App will notify you of the last known
location.
5. Place the Card in your wallet or any other thing.
Works with Pebblebee App Factory resetting your Card
123 4
How to disable FindMy
5
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Press the button three times. Press again and hold, then
release during the third beep.
3. Audible confirmation will sound.
This will reset the device and allow you to use it with
either the Apple Find My network OR the Pebblebee
App.
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Double press the button. Press again and hold, then release
during the second beep.
3. Audible confirmation will sound.
4. This will stop sharing the location of this item.
Thanks for choosing Pebblebee. Now that you’ve
received your Card you can join millions of users
worldwide in tracking your valuables.
We hope that you will enjoy the peace of mind
that the Pebblebee Card brings.
WELCOME TO THE PEBBLEBEE FAMILY
Works with Apple Find My™
Rechargeable battery
Splash resistant
Loud melody
Track location
Left Behind™ alert
CARD
Your new Card is rechargeable with the included
magnetic charger. Please ensure your Card is fully
charged before first use.
How to charge your Pebblebee Card
1. Plug USB end into a power adapter or a USB port,
such as your laptop.
2. Place the magnetic charger on top of the pins on
the back of the card (see picture below).
3. The LEDs on the Card will pulsate when charging
and illuminate a solid light when it’s fully charged.
Note: The battery cannot be removed. The Card includes a rechargeable
battery that is not replaceable. Opening or tampering with the device
voids warranty.
Charge your card Works with Apple Find My
Pebblebee Card works with the Apple Find My
network. With hundreds of millions of Apple devices
around the world, advanced end-to-end encryption,
and industry leading security, the Find My network
lets users easily locate their belongings in the Find
My app with the peace of mind that their privacy is
protected.
To set up Card in the Find My app:
1. Double-press the Pebblebee logo on the front of
the Card. You’ll hear a confirmation sound.
2. Open the Find My app on your iPhone or iPad and
tap +.
3. Next tap “Add Other Item ” and follow the
instructions displayed in the app.
1. PLEASE NOTE: If you chose the Pebblebee App to
claim your Card, you will not have access to the
Apple Find My network.
If you want to give your Card to a new owner to claim
it, or if you would like to switch between the Apple
Find My network and the Pebblebee network you will
need to factory reset your Card with the following
instructions:
At Pebblebee we create technology for peace of
mind. We are focused on designing devices that
makes your life easier. We hold a range of products
that includes key trackers, pet trackers, and devices
that use Bluetooth, GPS and cellular connectivity to
keep track of your valuables.
Scan to get 10% discount
on your next order!
Check out our products on pebblebee.com
Pebblebee Card can be used with the Apple
Find My network OR the Pebblebee App on
Google Play® and App Store®. Using the Apple
Find My network, prohibits the use of the
Pebblebee App, and vice versa. You may not
operate simultaneously on the Apple Find My
network and Pebblebee network. In order to
change networks, you must reset the device to
factory settings.
Learn more at: pebblebee.com/card
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of
this device or use of this product or its compliance with safety and regulatory
standards.
1. Navigate to the item page on the Find My app.
2. Scroll to the bottom.
3. Tap ”Remove item”, then ”Remove”.
Set up Card in the Find My app
How to remove item from the Find My app
2. Download the free Pebblebee App for your Android
or iOS phone and follow the in-app instructions.
3. Make sure that your phone’s Bluetooth is enabled
and that you’ve shared location permissions with the
Pebblebee app. If you have any more questions,
check out our setup guide on help.pebblebee.com.
4. Allow the Pebblebee app to always access your
location. This is needed to allow the app to locate
your valuables at all time. In case you lose your
items, the App will notify you of the last known
location.
5. Place the Card in your wallet or any other thing.
Works with Pebblebee App Factory resetting your Card
123 4
How to disable FindMy
5
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Press the button three times. Press again and hold, then
release during the third beep.
3. Audible confirmation will sound.
This will reset the device and allow you to use it with
either the Apple Find My network OR the Pebblebee
App.
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Double press the button. Press again and hold, then release
during the second beep.
3. Audible confirmation will sound.
4. This will stop sharing the location of this item.
Thanks for choosing Pebblebee. Now that you’ve
received your Card you can join millions of users
worldwide in tracking your valuables.
We hope that you will enjoy the peace of mind
that the Pebblebee Card brings.
WELCOME TO THE PEBBLEBEE FAMILY
Works with Apple Find My™
Rechargeable battery
Splash resistant
Loud melody
Track location
Left Behind™ alert
CARD
Your new Card is rechargeable with the included
magnetic charger. Please ensure your Card is fully
charged before first use.
How to charge your Pebblebee Card
1. Plug USB end into a power adapter or a USB port,
such as your laptop.
2. Place the magnetic charger on top of the pins on
the back of the card (see picture below).
3. The LEDs on the Card will pulsate when charging
and illuminate a solid light when it’s fully charged.
Note: The battery cannot be removed. The Card includes a rechargeable
battery that is not replaceable. Opening or tampering with the device
voids warranty.
Charge your card Works with Apple Find My
Pebblebee Card works with the Apple Find My
network. With hundreds of millions of Apple devices
around the world, advanced end-to-end encryption,
and industry leading security, the Find My network
lets users easily locate their belongings in the Find
My app with the peace of mind that their privacy is
protected.
To set up Card in the Find My app:
1. Double-press the Pebblebee logo on the front of
the Card. You’ll hear a confirmation sound.
2. Open the Find My app on your iPhone or iPad and
tap +.
3. Next tap “Add Other Item ” and follow the
instructions displayed in the app.
1. PLEASE NOTE: If you chose the Pebblebee App to
claim your Card, you will not have access to the
Apple Find My network.
If you want to give your Card to a new owner to claim
it, or if you would like to switch between the Apple
Find My network and the Pebblebee network you will
need to factory reset your Card with the following
instructions:
At Pebblebee we create technology for peace of
mind. We are focused on designing devices that
makes your life easier. We hold a range of products
that includes key trackers, pet trackers, and devices
that use Bluetooth, GPS and cellular connectivity to
keep track of your valuables.
Scan to get 10% discount
on your next order!
Check out our products on pebblebee.com
Pebblebee Card can be used with the Apple
Find My network OR the Pebblebee App on
Google Play® and App Store®. Using the Apple
Find My network, prohibits the use of the
Pebblebee App, and vice versa. You may not
operate simultaneously on the Apple Find My
network and Pebblebee network. In order to
change networks, you must reset the device to
factory settings.
Learn more at: pebblebee.com/card
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of
this device or use of this product or its compliance with safety and regulatory
standards.
1. Navigate to the item page on the Find My app.
2. Scroll to the bottom.
3. Tap ”Remove item”, then ”Remove”.
Set up Card in the Find My app
How to remove item from the Find My app
2. Download the free Pebblebee App for your Android
or iOS phone and follow the in-app instructions.
3. Make sure that your phone’s Bluetooth is enabled
and that you’ve shared location permissions with the
Pebblebee app. If you have any more questions,
check out our setup guide on help.pebblebee.com.
4. Allow the Pebblebee app to always access your
location. This is needed to allow the app to locate
your valuables at all time. In case you lose your
items, the App will notify you of the last known
location.
5. Place the Card in your wallet or any other thing.
Works with Pebblebee App Factory resetting your Card
123 4
How to disable FindMy
5
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Press the button three times. Press again and hold, then
release during the third beep.
3. Audible confirmation will sound.
This will reset the device and allow you to use it with
either the Apple Find My network OR the Pebblebee
App.
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Double press the button. Press again and hold, then release
during the second beep.
3. Audible confirmation will sound.
4. This will stop sharing the location of this item.
Thanks for choosing Pebblebee. Now that you’ve
received your Card you can join millions of users
worldwide in tracking your valuables.
We hope that you will enjoy the peace of mind
that the Pebblebee Card brings.
WELCOME TO THE PEBBLEBEE FAMILY
Works with Apple Find My™
Rechargeable battery
Splash resistant
Loud melody
Track location
Left Behind™ alert
CARD
Your new Card is rechargeable with the included
magnetic charger. Please ensure your Card is fully
charged before first use.
How to charge your Pebblebee Card
1. Plug USB end into a power adapter or a USB port,
such as your laptop.
2. Place the magnetic charger on top of the pins on
the back of the card (see picture below).
3. The LEDs on the Card will pulsate when charging
and illuminate a solid light when it’s fully charged.
Note: The battery cannot be removed. The Card includes a rechargeable
battery that is not replaceable. Opening or tampering with the device
voids warranty.
Charge your card Works with Apple Find My
Pebblebee Card works with the Apple Find My
network. With hundreds of millions of Apple devices
around the world, advanced end-to-end encryption,
and industry leading security, the Find My network
lets users easily locate their belongings in the Find
My app with the peace of mind that their privacy is
protected.
To set up Card in the Find My app:
1. Double-press the Pebblebee logo on the front of
the Card. You’ll hear a confirmation sound.
2. Open the Find My app on your iPhone or iPad and
tap +.
3. Next tap “Add Other Item ” and follow the
instructions displayed in the app.
1. PLEASE NOTE: If you chose the Pebblebee App to
claim your Card, you will not have access to the
Apple Find My network.
If you want to give your Card to a new owner to claim
it, or if you would like to switch between the Apple
Find My network and the Pebblebee network you will
need to factory reset your Card with the following
instructions:
At Pebblebee we create technology for peace of
mind. We are focused on designing devices that
makes your life easier. We hold a range of products
that includes key trackers, pet trackers, and devices
that use Bluetooth, GPS and cellular connectivity to
keep track of your valuables.
Scan to get 10% discount
on your next order!
Check out our products on pebblebee.com
Pebblebee Card can be used with the Apple
Find My network OR the Pebblebee App on
Google Play® and App Store®. Using the Apple
Find My network, prohibits the use of the
Pebblebee App, and vice versa. You may not
operate simultaneously on the Apple Find My
network and Pebblebee network. In order to
change networks, you must reset the device to
factory settings.
Learn more at: pebblebee.com/card
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of
this device or use of this product or its compliance with safety and regulatory
standards.
1. Navigate to the item page on the Find My app.
2. Scroll to the bottom.
3. Tap ”Remove item”, then ”Remove”.
Set up Card in the Find My app
How to remove item from the Find My app
2. Download the free Pebblebee App for your Android
or iOS phone and follow the in-app instructions.
3. Make sure that your phone’s Bluetooth is enabled
and that you’ve shared location permissions with the
Pebblebee app. If you have any more questions,
check out our setup guide on help.pebblebee.com.
4. Allow the Pebblebee app to always access your
location. This is needed to allow the app to locate
your valuables at all time. In case you lose your
items, the App will notify you of the last known
location.
5. Place the Card in your wallet or any other thing.
Works with Pebblebee App Factory resetting your Card
123 4
How to disable FindMy
5
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Press the button three times. Press again and hold, then
release during the third beep.
3. Audible confirmation will sound.
This will reset the device and allow you to use it with
either the Apple Find My network OR the Pebblebee
App.
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Double press the button. Press again and hold, then release
during the second beep.
3. Audible confirmation will sound.
4. This will stop sharing the location of this item.
Thanks for choosing Pebblebee. Now that you’ve
received your Card you can join millions of users
worldwide in tracking your valuables.
We hope that you will enjoy the peace of mind
that the Pebblebee Card brings.
WELCOME TO THE PEBBLEBEE FAMILY
Works with Apple Find My™
Rechargeable battery
Splash resistant
Loud melody
Track location
Left Behind™ alert
CARD
Your new Card is rechargeable with the included
magnetic charger. Please ensure your Card is fully
charged before first use.
How to charge your Pebblebee Card
1. Plug USB end into a power adapter or a USB port,
such as your laptop.
2. Place the magnetic charger on top of the pins on
the back of the card (see picture below).
3. The LEDs on the Card will pulsate when charging
and illuminate a solid light when it’s fully charged.
Note: The battery cannot be removed. The Card includes a rechargeable
battery that is not replaceable. Opening or tampering with the device
voids warranty.
Charge your card Works with Apple Find My
Pebblebee Card works with the Apple Find My
network. With hundreds of millions of Apple devices
around the world, advanced end-to-end encryption,
and industry leading security, the Find My network
lets users easily locate their belongings in the Find
My app with the peace of mind that their privacy is
protected.
To set up Card in the Find My app:
1. Double-press the Pebblebee logo on the front of
the Card. You’ll hear a confirmation sound.
2. Open the Find My app on your iPhone or iPad and
tap +.
3. Next tap “Add Other Item ” and follow the
instructions displayed in the app.
1. PLEASE NOTE: If you chose the Pebblebee App to
claim your Card, you will not have access to the
Apple Find My network.
If you want to give your Card to a new owner to claim
it, or if you would like to switch between the Apple
Find My network and the Pebblebee network you will
need to factory reset your Card with the following
instructions:
At Pebblebee we create technology for peace of
mind. We are focused on designing devices that
makes your life easier. We hold a range of products
that includes key trackers, pet trackers, and devices
that use Bluetooth, GPS and cellular connectivity to
keep track of your valuables.
Scan to get 10% discount
on your next order!
Check out our products on pebblebee.com
Pebblebee Card can be used with the Apple
Find My network OR the Pebblebee App on
Google Play® and App Store®. Using the Apple
Find My network, prohibits the use of the
Pebblebee App, and vice versa. You may not
operate simultaneously on the Apple Find My
network and Pebblebee network. In order to
change networks, you must reset the device to
factory settings.
Learn more at: pebblebee.com/card
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of
this device or use of this product or its compliance with safety and regulatory
standards.
1. Navigate to the item page on the Find My app.
2. Scroll to the bottom.
3. Tap ”Remove item”, then ”Remove”.
Set up Card in the Find My app
How to remove item from the Find My app
2. Download the free Pebblebee App for your Android
or iOS phone and follow the in-app instructions.
3. Make sure that your phone’s Bluetooth is enabled
and that you’ve shared location permissions with the
Pebblebee app. If you have any more questions,
check out our setup guide on help.pebblebee.com.
4. Allow the Pebblebee app to always access your
location. This is needed to allow the app to locate
your valuables at all time. In case you lose your
items, the App will notify you of the last known
location.
5. Place the Card in your wallet or any other thing.
Works with Pebblebee App Factory resetting your Card
123 4
How to disable FindMy
5
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Press the button three times. Press again and hold, then
release during the third beep.
3. Audible confirmation will sound.
This will reset the device and allow you to use it with
either the Apple Find My network OR the Pebblebee
App.
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Double press the button. Press again and hold, then release
during the second beep.
3. Audible confirmation will sound.
4. This will stop sharing the location of this item.
CARD
Rechargeable lithium polymer battery, lasts up to 12 months per
charge. The Apple Find My™ network provides an easy, secure
way to locate compatible personal items using the Find My™ app
on your iPhone®, iPad®, Mac®, iPod touch®, or the Find Items app
on Apple Watch®. To use the Find My app to locate this item, the
latest version of iOS®, iPadOS®, or macOS® is recommended. The
Find Items app on Apple Watch® requires the latest version of
watchOS®. Apple Find My, Apple Watch, Find My, iPhone, iPad,
iPadOS, iPod touch, Mac, macOS and watchOS are trademarks of
Apple Inc. IOS is a trademark of Cisco and is used under license.
MODEL NO. PB-621-B
FCC ID: 2AG5OPB-621-B
@pebblebee
IC Bluetooth SIG certified
pebblebee.com
Use and care
Please ensure proper operations of your Card device.
Your Card is splash resistant. This means that it’s
safe for water splashes. To preserve your device’s
life, we do not recommend submerging it in water.
Keep the Card stored and operating in temperatures
listed below. Avoid freezing weather and extremely
hot temperatures to ensure best functionality.
Make sure that device is dry before charging it.
Charging the device when it’s wet voids warranty.
Pebblebee offers a 1 year limited waranty against
product defects, effective from the time of delivery.
Product defects do not include those resulting from
accident, water damage, product modification, or
failure to follow instructions for use. If Pebblebee
deems the product defective, Pebblebee will replace
the device upon receipt.
believe your device to be defective. Our support team
can identify and resolve most issues and will be
happy to provide exchange directions for devices that
fall within the warranty.
When your device reaches the end of their useful life,
please dispose of at your local e-waste center to be
recycled and properly discarded, ensuring protection
of our environment. Contact your local authorities to
find a reputable and certified e-waste center near
you.
Water Resistance
Environmental Requirements
Operating temp: 5 °F to 11 °F (-15 °C to 43 °C)
Storage temp: -1+ °F to 130 °F (-23 °C to 54 °C)
67
8
9
Location Services
Bluetooth
Apple Find My network
Mobile Compatibility
Requires Bluetooth 4.0 and up.
To use the Find My app to locate this item, the latest
version of iOS®, iPadOS®, or macOS® is recommen-
ded. The Find Items app on Apple Watch® requires
the latest version of watchOS®.
To use the Pebblebee app, we recommend using the
latest version of iOS or Android.
For more instructions please visit:
help.pebblebee.com
Limited warranty
Safe electronical disposal
Power
Proprietary contact charging
Weigth / Dimensions
0.5 oz ( 15 grams)
2.12” x 3.35” x 0.11” (54 mm x 85 mm x 2.8 mm)
Specs Regulatory & safety information
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government. The
exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC/IC is 1.6W/kg. For body worn operation, this
device has been tested and meets RF exposure guidelines when use
with an accessary that contains no metal.
Use of other accessories may not ensure compliance with RF exposure
guidelines. The 5mm minimum separation distance between the body
and this device should be maintained during the operation to ensure
the compliance of RF exposure guidelines.
FCC RF Exposure Information (SAR)FCC Compliance Statement
10
Industry Canada Compliance Statement
This device complies with Industry Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
(1)l’appareil ne doit pas produire de brouillage;
(2)l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in
section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users
can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation
dans la section 2.5 de RSS 102 et la conformité à l’exposition de
RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur
l’exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. The highest reported SAR value
for this device is 0.413 W/Kg, 5mm which is less than the SAR limit 1.6
W/kg set by the Industry Canada.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même
temps qu’aucune autre antenne ou émetteur. La valeur DAS la plus
élevée rapportée pour cet appareil est de 0.413 W /kg à 5 mm, ce qui est
inférieur à la limite DAS de 1,6 W / kg établie par Industrie Canada.
Thin Rechargeable Item Finder
Ultimate tracker for wallets or narrow spaces
CARD
IC: 23453-PB621B
™
RECHARGEABLE
UP TO 12 MONTHS PER CHARGE
CARD
Rechargeable lithium polymer battery, lasts up to 12 months per
charge. The Apple Find My™ network provides an easy, secure
way to locate compatible personal items using the Find My™ app
on your iPhone®, iPad®, Mac®, iPod touch®, or the Find Items app
on Apple Watch®. To use the Find My app to locate this item, the
latest version of iOS®, iPadOS®, or macOS® is recommended. The
Find Items app on Apple Watch® requires the latest version of
watchOS®. Apple Find My, Apple Watch, Find My, iPhone, iPad,
iPadOS, iPod touch, Mac, macOS and watchOS are trademarks of
Apple Inc. IOS is a trademark of Cisco and is used under license.
MODEL NO. PB-621-B
FCC ID: 2AG5OPB-621-B
@pebblebee
IC Bluetooth SIG certified
pebblebee.com
Use and care
Please ensure proper operations of your Card device.
Your Card is splash resistant. This means that it’s
safe for water splashes. To preserve your device’s
life, we do not recommend submerging it in water.
Keep the Card stored and operating in temperatures
listed below. Avoid freezing weather and extremely
hot temperatures to ensure best functionality.
Make sure that device is dry before charging it.
Charging the device when it’s wet voids warranty.
Pebblebee offers a 1 year limited waranty against
product defects, effective from the time of delivery.
Product defects do not include those resulting from
accident, water damage, product modification, or
failure to follow instructions for use. If Pebblebee
deems the product defective, Pebblebee will replace
the device upon receipt.
believe your device to be defective. Our support team
can identify and resolve most issues and will be
happy to provide exchange directions for devices that
fall within the warranty.
When your device reaches the end of their useful life,
please dispose of at your local e-waste center to be
recycled and properly discarded, ensuring protection
of our environment. Contact your local authorities to
find a reputable and certified e-waste center near
you.
Water Resistance
Environmental Requirements
Operating temp: 5 °F to 11 °F (-15 °C to 43 °C)
Storage temp: -1+ °F to 130 °F (-23 °C to 54 °C)
67
8
9
Location Services
Bluetooth
Apple Find My network
Mobile Compatibility
Requires Bluetooth 4.0 and up.
To use the Find My app to locate this item, the latest
version of iOS®, iPadOS®, or macOS® is recommen-
ded. The Find Items app on Apple Watch® requires
the latest version of watchOS®.
To use the Pebblebee app, we recommend using the
latest version of iOS or Android.
For more instructions please visit:
help.pebblebee.com
Limited warranty
Safe electronical disposal
Power
Proprietary contact charging
Weigth / Dimensions
0.5 oz ( 15 grams)
2.12” x 3.35” x 0.11” (54 mm x 85 mm x 2.8 mm)
Specs Regulatory & safety information
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government. The
exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC/IC is 1.6W/kg. For body worn operation, this
device has been tested and meets RF exposure guidelines when use
with an accessary that contains no metal.
Use of other accessories may not ensure compliance with RF exposure
guidelines. The 5mm minimum separation distance between the body
and this device should be maintained during the operation to ensure
the compliance of RF exposure guidelines.
FCC RF Exposure Information (SAR)FCC Compliance Statement
10
Industry Canada Compliance Statement
This device complies with Industry Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
(1)l’appareil ne doit pas produire de brouillage;
(2)l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in
section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users
can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation
dans la section 2.5 de RSS 102 et la conformité à l’exposition de
RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur
l’exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. The highest reported SAR value
for this device is 0.413 W/Kg, 5mm which is less than the SAR limit 1.6
W/kg set by the Industry Canada.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même
temps qu’aucune autre antenne ou émetteur. La valeur DAS la plus
élevée rapportée pour cet appareil est de 0.413 W /kg à 5 mm, ce qui est
inférieur à la limite DAS de 1,6 W / kg établie par Industrie Canada.
Thin Rechargeable Item Finder
Ultimate tracker for wallets or narrow spaces
CARD
IC: 23453-PB621B
™
RECHARGEABLE
UP TO 12 MONTHS PER CHARGE
CARD
Rechargeable lithium polymer battery, lasts up to 12 months per
charge. The Apple Find My™ network provides an easy, secure
way to locate compatible personal items using the Find My™ app
on your iPhone®, iPad®, Mac®, iPod touch®, or the Find Items app
on Apple Watch®. To use the Find My app to locate this item, the
latest version of iOS®, iPadOS®, or macOS® is recommended. The
Find Items app on Apple Watch® requires the latest version of
watchOS®. Apple Find My, Apple Watch, Find My, iPhone, iPad,
iPadOS, iPod touch, Mac, macOS and watchOS are trademarks of
Apple Inc. IOS is a trademark of Cisco and is used under license.
MODEL NO. PB-621-B
FCC ID: 2AG5OPB-621-B
@pebblebee
IC Bluetooth SIG certified
pebblebee.com
Use and care
Please ensure proper operations of your Card device.
Your Card is splash resistant. This means that it’s
safe for water splashes. To preserve your device’s
life, we do not recommend submerging it in water.
Keep the Card stored and operating in temperatures
listed below. Avoid freezing weather and extremely
hot temperatures to ensure best functionality.
Make sure that device is dry before charging it.
Charging the device when it’s wet voids warranty.
Pebblebee offers a 1 year limited waranty against
product defects, effective from the time of delivery.
Product defects do not include those resulting from
accident, water damage, product modification, or
failure to follow instructions for use. If Pebblebee
deems the product defective, Pebblebee will replace
the device upon receipt.
believe your device to be defective. Our support team
can identify and resolve most issues and will be
happy to provide exchange directions for devices that
fall within the warranty.
When your device reaches the end of their useful life,
please dispose of at your local e-waste center to be
recycled and properly discarded, ensuring protection
of our environment. Contact your local authorities to
find a reputable and certified e-waste center near
you.
Water Resistance
Environmental Requirements
Operating temp: 5 °F to 11 °F (-15 °C to 43 °C)
Storage temp: -1+ °F to 130 °F (-23 °C to 54 °C)
67
8
9
Location Services
Bluetooth
Apple Find My network
Mobile Compatibility
Requires Bluetooth 4.0 and up.
To use the Find My app to locate this item, the latest
version of iOS®, iPadOS®, or macOS® is recommen-
ded. The Find Items app on Apple Watch® requires
the latest version of watchOS®.
To use the Pebblebee app, we recommend using the
latest version of iOS or Android.
For more instructions please visit:
help.pebblebee.com
Limited warranty
Safe electronical disposal
Power
Proprietary contact charging
Weigth / Dimensions
0.5 oz ( 15 grams)
2.12” x 3.35” x 0.11” (54 mm x 85 mm x 2.8 mm)
Specs Regulatory & safety information
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government. The
exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC/IC is 1.6W/kg. For body worn operation, this
device has been tested and meets RF exposure guidelines when use
with an accessary that contains no metal.
Use of other accessories may not ensure compliance with RF exposure
guidelines. The 5mm minimum separation distance between the body
and this device should be maintained during the operation to ensure
the compliance of RF exposure guidelines.
FCC RF Exposure Information (SAR)FCC Compliance Statement
10
Industry Canada Compliance Statement
This device complies with Industry Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
(1)l’appareil ne doit pas produire de brouillage;
(2)l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in
section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users
can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation
dans la section 2.5 de RSS 102 et la conformité à l’exposition de
RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur
l’exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. The highest reported SAR value
for this device is 0.413 W/Kg, 5mm which is less than the SAR limit 1.6
W/kg set by the Industry Canada.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même
temps qu’aucune autre antenne ou émetteur. La valeur DAS la plus
élevée rapportée pour cet appareil est de 0.413 W /kg à 5 mm, ce qui est
inférieur à la limite DAS de 1,6 W / kg établie par Industrie Canada.
Thin Rechargeable Item Finder
Ultimate tracker for wallets or narrow spaces
CARD
IC: 23453-PB621B
™
RECHARGEABLE
UP TO 12 MONTHS PER CHARGE
CARD
Rechargeable lithium polymer battery, lasts up to 12 months per
charge. The Apple Find My™ network provides an easy, secure
way to locate compatible personal items using the Find My™ app
on your iPhone®, iPad®, Mac®, iPod touch®, or the Find Items app
on Apple Watch®. To use the Find My app to locate this item, the
latest version of iOS®, iPadOS®, or macOS® is recommended. The
Find Items app on Apple Watch® requires the latest version of
watchOS®. Apple Find My, Apple Watch, Find My, iPhone, iPad,
iPadOS, iPod touch, Mac, macOS and watchOS are trademarks of
Apple Inc. IOS is a trademark of Cisco and is used under license.
MODEL NO. PB-621-B
FCC ID: 2AG5OPB-621-B
@pebblebee
IC Bluetooth SIG certified
pebblebee.com
Use and care
Please ensure proper operations of your Card device.
Your Card is splash resistant. This means that it’s
safe for water splashes. To preserve your device’s
life, we do not recommend submerging it in water.
Keep the Card stored and operating in temperatures
listed below. Avoid freezing weather and extremely
hot temperatures to ensure best functionality.
Make sure that device is dry before charging it.
Charging the device when it’s wet voids warranty.
Pebblebee offers a 1 year limited waranty against
product defects, effective from the time of delivery.
Product defects do not include those resulting from
accident, water damage, product modification, or
failure to follow instructions for use. If Pebblebee
deems the product defective, Pebblebee will replace
the device upon receipt.
believe your device to be defective. Our support team
can identify and resolve most issues and will be
happy to provide exchange directions for devices that
fall within the warranty.
When your device reaches the end of their useful life,
please dispose of at your local e-waste center to be
recycled and properly discarded, ensuring protection
of our environment. Contact your local authorities to
find a reputable and certified e-waste center near
you.
Water Resistance
Environmental Requirements
Operating temp: 5 °F to 11 °F (-15 °C to 43 °C)
Storage temp: -1+ °F to 130 °F (-23 °C to 54 °C)
67
8
9
Location Services
Bluetooth
Apple Find My network
Mobile Compatibility
Requires Bluetooth 4.0 and up.
To use the Find My app to locate this item, the latest
version of iOS®, iPadOS®, or macOS® is recommen-
ded. The Find Items app on Apple Watch® requires
the latest version of watchOS®.
To use the Pebblebee app, we recommend using the
latest version of iOS or Android.
For more instructions please visit:
help.pebblebee.com
Limited warranty
Safe electronical disposal
Power
Proprietary contact charging
Weigth / Dimensions
0.5 oz ( 15 grams)
2.12” x 3.35” x 0.11” (54 mm x 85 mm x 2.8 mm)
Specs Regulatory & safety information
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government. The
exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC/IC is 1.6W/kg. For body worn operation, this
device has been tested and meets RF exposure guidelines when use
with an accessary that contains no metal.
Use of other accessories may not ensure compliance with RF exposure
guidelines. The 5mm minimum separation distance between the body
and this device should be maintained during the operation to ensure
the compliance of RF exposure guidelines.
FCC RF Exposure Information (SAR)FCC Compliance Statement
10
Industry Canada Compliance Statement
This device complies with Industry Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
(1)l’appareil ne doit pas produire de brouillage;
(2)l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in
section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users
can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation
dans la section 2.5 de RSS 102 et la conformité à l’exposition de
RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur
l’exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. The highest reported SAR value
for this device is 0.413 W/Kg, 5mm which is less than the SAR limit 1.6
W/kg set by the Industry Canada.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même
temps qu’aucune autre antenne ou émetteur. La valeur DAS la plus
élevée rapportée pour cet appareil est de 0.413 W /kg à 5 mm, ce qui est
inférieur à la limite DAS de 1,6 W / kg établie par Industrie Canada.
Thin Rechargeable Item Finder
Ultimate tracker for wallets or narrow spaces
CARD
IC: 23453-PB621B
™
RECHARGEABLE
UP TO 12 MONTHS PER CHARGE
CARD
Rechargeable lithium polymer battery, lasts up to 12 months per
charge. The Apple Find My™ network provides an easy, secure
way to locate compatible personal items using the Find My™ app
on your iPhone®, iPad®, Mac®, iPod touch®, or the Find Items app
on Apple Watch®. To use the Find My app to locate this item, the
latest version of iOS®, iPadOS®, or macOS® is recommended. The
Find Items app on Apple Watch® requires the latest version of
watchOS®. Apple Find My, Apple Watch, Find My, iPhone, iPad,
iPadOS, iPod touch, Mac, macOS and watchOS are trademarks of
Apple Inc. IOS is a trademark of Cisco and is used under license.
MODEL NO. PB-621-B
FCC ID: 2AG5OPB-621-B
@pebblebee
IC Bluetooth SIG certified
pebblebee.com
Use and care
Please ensure proper operations of your Card device.
Your Card is splash resistant. This means that it’s
safe for water splashes. To preserve your device’s
life, we do not recommend submerging it in water.
Keep the Card stored and operating in temperatures
listed below. Avoid freezing weather and extremely
hot temperatures to ensure best functionality.
Make sure that device is dry before charging it.
Charging the device when it’s wet voids warranty.
Pebblebee offers a 1 year limited waranty against
product defects, effective from the time of delivery.
Product defects do not include those resulting from
accident, water damage, product modification, or
failure to follow instructions for use. If Pebblebee
deems the product defective, Pebblebee will replace
the device upon receipt.
believe your device to be defective. Our support team
can identify and resolve most issues and will be
happy to provide exchange directions for devices that
fall within the warranty.
When your device reaches the end of their useful life,
please dispose of at your local e-waste center to be
recycled and properly discarded, ensuring protection
of our environment. Contact your local authorities to
find a reputable and certified e-waste center near
you.
Water Resistance
Environmental Requirements
Operating temp: 5 °F to 11 °F (-15 °C to 43 °C)
Storage temp: -1+ °F to 130 °F (-23 °C to 54 °C)
67
8
9
Location Services
Bluetooth
Apple Find My network
Mobile Compatibility
Requires Bluetooth 4.0 and up.
To use the Find My app to locate this item, the latest
version of iOS®, iPadOS®, or macOS® is recommen-
ded. The Find Items app on Apple Watch® requires
the latest version of watchOS®.
To use the Pebblebee app, we recommend using the
latest version of iOS or Android.
For more instructions please visit:
help.pebblebee.com
Limited warranty
Safe electronical disposal
Power
Proprietary contact charging
Weigth / Dimensions
0.5 oz ( 15 grams)
2.12” x 3.35” x 0.11” (54 mm x 85 mm x 2.8 mm)
Specs Regulatory & safety information
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government. The
exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC/IC is 1.6W/kg. For body worn operation, this
device has been tested and meets RF exposure guidelines when use
with an accessary that contains no metal.
Use of other accessories may not ensure compliance with RF exposure
guidelines. The 5mm minimum separation distance between the body
and this device should be maintained during the operation to ensure
the compliance of RF exposure guidelines.
FCC RF Exposure Information (SAR)FCC Compliance Statement
10
Industry Canada Compliance Statement
This device complies with Industry Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
(1)l’appareil ne doit pas produire de brouillage;
(2)l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in
section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users
can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation
dans la section 2.5 de RSS 102 et la conformité à l’exposition de
RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur
l’exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. The highest reported SAR value
for this device is 0.413 W/Kg, 5mm which is less than the SAR limit 1.6
W/kg set by the Industry Canada.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même
temps qu’aucune autre antenne ou émetteur. La valeur DAS la plus
élevée rapportée pour cet appareil est de 0.413 W /kg à 5 mm, ce qui est
inférieur à la limite DAS de 1,6 W / kg établie par Industrie Canada.
Thin Rechargeable Item Finder
Ultimate tracker for wallets or narrow spaces
CARD
IC: 23453-PB621B
™
RECHARGEABLE
UP TO 12 MONTHS PER CHARGE
CARD
Rechargeable lithium polymer battery, lasts up to 12 months per
charge. The Apple Find My™ network provides an easy, secure
way to locate compatible personal items using the Find My™ app
on your iPhone®, iPad®, Mac®, iPod touch®, or the Find Items app
on Apple Watch®. To use the Find My app to locate this item, the
latest version of iOS®, iPadOS®, or macOS® is recommended. The
Find Items app on Apple Watch® requires the latest version of
watchOS®. Apple Find My, Apple Watch, Find My, iPhone, iPad,
iPadOS, iPod touch, Mac, macOS and watchOS are trademarks of
Apple Inc. IOS is a trademark of Cisco and is used under license.
MODEL NO. PB-621-B
FCC ID: 2AG5OPB-621-B
@pebblebee
IC Bluetooth SIG certified
pebblebee.com
Use and care
Please ensure proper operations of your Card device.
Your Card is splash resistant. This means that it’s
safe for water splashes. To preserve your device’s
life, we do not recommend submerging it in water.
Keep the Card stored and operating in temperatures
listed below. Avoid freezing weather and extremely
hot temperatures to ensure best functionality.
Make sure that device is dry before charging it.
Charging the device when it’s wet voids warranty.
Pebblebee offers a 1 year limited waranty against
product defects, effective from the time of delivery.
Product defects do not include those resulting from
accident, water damage, product modification, or
failure to follow instructions for use. If Pebblebee
deems the product defective, Pebblebee will replace
the device upon receipt.
believe your device to be defective. Our support team
can identify and resolve most issues and will be
happy to provide exchange directions for devices that
fall within the warranty.
When your device reaches the end of their useful life,
please dispose of at your local e-waste center to be
recycled and properly discarded, ensuring protection
of our environment. Contact your local authorities to
find a reputable and certified e-waste center near
you.
Water Resistance
Environmental Requirements
Operating temp: 5 °F to 11 °F (-15 °C to 43 °C)
Storage temp: -1+ °F to 130 °F (-23 °C to 54 °C)
67
8
9
Location Services
Bluetooth
Apple Find My network
Mobile Compatibility
Requires Bluetooth 4.0 and up.
To use the Find My app to locate this item, the latest
version of iOS®, iPadOS®, or macOS® is recommen-
ded. The Find Items app on Apple Watch® requires
the latest version of watchOS®.
To use the Pebblebee app, we recommend using the
latest version of iOS or Android.
For more instructions please visit:
help.pebblebee.com
Limited warranty
Safe electronical disposal
Power
Proprietary contact charging
Weigth / Dimensions
0.5 oz ( 15 grams)
2.12” x 3.35” x 0.11” (54 mm x 85 mm x 2.8 mm)
Specs Regulatory & safety information
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government. The
exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC/IC is 1.6W/kg. For body worn operation, this
device has been tested and meets RF exposure guidelines when use
with an accessary that contains no metal.
Use of other accessories may not ensure compliance with RF exposure
guidelines. The 5mm minimum separation distance between the body
and this device should be maintained during the operation to ensure
the compliance of RF exposure guidelines.
FCC RF Exposure Information (SAR)FCC Compliance Statement
10
Industry Canada Compliance Statement
This device complies with Industry Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
(1)l’appareil ne doit pas produire de brouillage;
(2)l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in
section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users
can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation
dans la section 2.5 de RSS 102 et la conformité à l’exposition de
RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur
l’exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. The highest reported SAR value
for this device is 0.413 W/Kg, 5mm which is less than the SAR limit 1.6
W/kg set by the Industry Canada.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même
temps qu’aucune autre antenne ou émetteur. La valeur DAS la plus
élevée rapportée pour cet appareil est de 0.413 W /kg à 5 mm, ce qui est
inférieur à la limite DAS de 1,6 W / kg établie par Industrie Canada.
Thin Rechargeable Item Finder
Ultimate tracker for wallets or narrow spaces
CARD
IC: 23453-PB621B
™
RECHARGEABLE
UP TO 12 MONTHS PER CHARGE
Thanks for choosing Pebblebee. Now that you’ve
received your Card you can join millions of users
worldwide in tracking your valuables.
We hope that you will enjoy the peace of mind
that the Pebblebee Card brings.
WELCOME TO THE PEBBLEBEE FAMILY
Works with Apple Find My™
Rechargeable battery
Splash resistant
Loud melody
Track location
Left Behind™ alert
CARD
Your new Card is rechargeable with the included
magnetic charger. Please ensure your Card is fully
charged before first use.
How to charge your Pebblebee Card
1. Plug USB end into a power adapter or a USB port,
such as your laptop.
2. Place the magnetic charger on top of the pins on
the back of the card (see picture below).
3. The LEDs on the Card will pulsate when charging
and illuminate a solid light when it’s fully charged.
Note: The battery cannot be removed. The Card includes a rechargeable
battery that is not replaceable. Opening or tampering with the device
voids warranty.
Charge your card Works with Apple Find My
Pebblebee Card works with the Apple Find My
network. With hundreds of millions of Apple devices
around the world, advanced end-to-end encryption,
and industry leading security, the Find My network
lets users easily locate their belongings in the Find
My app with the peace of mind that their privacy is
protected.
To set up Card in the Find My app:
1. Double-press the Pebblebee logo on the front of
the Card. You’ll hear a confirmation sound.
2. Open the Find My app on your iPhone or iPad and
tap +.
3. Next tap “Add Other Item ” and follow the
instructions displayed in the app.
1. PLEASE NOTE: If you chose the Pebblebee App to
claim your Card, you will not have access to the
Apple Find My network.
If you want to give your Card to a new owner to claim
it, or if you would like to switch between the Apple
Find My network and the Pebblebee network you will
need to factory reset your Card with the following
instructions:
At Pebblebee we create technology for peace of
mind. We are focused on designing devices that
makes your life easier. We hold a range of products
that includes key trackers, pet trackers, and devices
that use Bluetooth, GPS and cellular connectivity to
keep track of your valuables.
Scan to get 10% discount
on your next order!
Check out our products on pebblebee.com
Pebblebee Card can be used with the Apple
Find My network OR the Pebblebee App on
Google Play® and App Store®. Using the Apple
Find My network, prohibits the use of the
Pebblebee App, and vice versa. You may not
operate simultaneously on the Apple Find My
network and Pebblebee network. In order to
change networks, you must reset the device to
factory settings.
Learn more at: pebblebee.com/card
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of
this device or use of this product or its compliance with safety and regulatory
standards.
1. Navigate to the item page on the Find My app.
2. Scroll to the bottom.
3. Tap ”Remove item”, then ”Remove”.
Set up Card in the Find My app
How to remove item from the Find My app
2. Download the free Pebblebee App for your Android
or iOS phone and follow the in-app instructions.
3. Make sure that your phone’s Bluetooth is enabled
and that you’ve shared location permissions with the
Pebblebee app. If you have any more questions,
check out our setup guide on help.pebblebee.com.
4. Allow the Pebblebee app to always access your
location. This is needed to allow the app to locate
your valuables at all time. In case you lose your
items, the App will notify you of the last known
location.
5. Place the Card in your wallet or any other thing.
Works with Pebblebee App Factory resetting your Card
123 4
How to disable FindMy
5
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Press the button three times. Press again and hold, then
release during the third beep.
3. Audible confirmation will sound.
This will reset the device and allow you to use it with
either the Apple Find My network OR the Pebblebee
App.
1. Locate the button on the front of the Card, under the
Pebblebee logo.
2. Double press the button. Press again and hold, then release
during the second beep.
3. Audible confirmation will sound.
4. This will stop sharing the location of this item.
CARD
Rechargeable lithium polymer battery, lasts up to 12 months per
charge. The Apple Find My™ network provides an easy, secure
way to locate compatible personal items using the Find My™ app
on your iPhone®, iPad®, Mac®, iPod touch®, or the Find Items app
on Apple Watch®. To use the Find My app to locate this item, the
latest version of iOS®, iPadOS®, or macOS® is recommended. The
Find Items app on Apple Watch® requires the latest version of
watchOS®. Apple Find My, Apple Watch, Find My, iPhone, iPad,
iPadOS, iPod touch, Mac, macOS and watchOS are trademarks of
Apple Inc. IOS is a trademark of Cisco and is used under license.
MODEL NO. PB-621-B
FCC ID: 2AG5OPB-621-B
@pebblebee
IC Bluetooth SIG certified
pebblebee.com
Use and care
Please ensure proper operations of your Card device.
Your Card is splash resistant. This means that it’s
safe for water splashes. To preserve your device’s
life, we do not recommend submerging it in water.
Keep the Card stored and operating in temperatures
listed below. Avoid freezing weather and extremely
hot temperatures to ensure best functionality.
Make sure that device is dry before charging it.
Charging the device when it’s wet voids warranty.
Pebblebee offers a 1 year limited waranty against
product defects, effective from the time of delivery.
Product defects do not include those resulting from
accident, water damage, product modification, or
failure to follow instructions for use. If Pebblebee
deems the product defective, Pebblebee will replace
the device upon receipt.
believe your device to be defective. Our support team
can identify and resolve most issues and will be
happy to provide exchange directions for devices that
fall within the warranty.
When your device reaches the end of their useful life,
please dispose of at your local e-waste center to be
recycled and properly discarded, ensuring protection
of our environment. Contact your local authorities to
find a reputable and certified e-waste center near
you.
Water Resistance
Environmental Requirements
Operating temp: 5 °F to 11 °F (-15 °C to 43 °C)
Storage temp: -1+ °F to 130 °F (-23 °C to 54 °C)
67
8
9
Location Services
Bluetooth
Apple Find My network
Mobile Compatibility
Requires Bluetooth 4.0 and up.
To use the Find My app to locate this item, the latest
version of iOS®, iPadOS®, or macOS® is recommen-
ded. The Find Items app on Apple Watch® requires
the latest version of watchOS®.
To use the Pebblebee app, we recommend using the
latest version of iOS or Android.
For more instructions please visit:
help.pebblebee.com
Limited warranty
Safe electronical disposal
Power
Proprietary contact charging
Weigth / Dimensions
0.5 oz ( 15 grams)
2.12” x 3.35” x 0.11” (54 mm x 85 mm x 2.8 mm)
Specs Regulatory & safety information
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government. The
exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC/IC is 1.6W/kg. For body worn operation, this
device has been tested and meets RF exposure guidelines when use
with an accessary that contains no metal.
Use of other accessories may not ensure compliance with RF exposure
guidelines. The 5mm minimum separation distance between the body
and this device should be maintained during the operation to ensure
the compliance of RF exposure guidelines.
FCC RF Exposure Information (SAR)FCC Compliance Statement
10
Industry Canada Compliance Statement
This device complies with Industry Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
(1)l’appareil ne doit pas produire de brouillage;
(2)l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in
section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users
can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation
dans la section 2.5 de RSS 102 et la conformité à l’exposition de
RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur
l’exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. The highest reported SAR value
for this device is 0.413 W/Kg, 5mm which is less than the SAR limit 1.6
W/kg set by the Industry Canada.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même
temps qu’aucune autre antenne ou émetteur. La valeur DAS la plus
élevée rapportée pour cet appareil est de 0.413 W /kg à 5 mm, ce qui est
inférieur à la limite DAS de 1,6 W / kg établie par Industrie Canada.
Thin Rechargeable Item Finder
Ultimate tracker for wallets or narrow spaces
CARD
IC: 23453-PB621B
™
RECHARGEABLE
UP TO 12 MONTHS PER CHARGE
Table of contents
Other Pebblebee GPS manuals
Pebblebee
Pebblebee Finder 2 User manual
Pebblebee
Pebblebee PB-601-B User manual
Pebblebee
Pebblebee found LTE User manual
Pebblebee
Pebblebee Honey PB-501-B User manual
Pebblebee
Pebblebee Honey Assembly instructions
Pebblebee
Pebblebee Finder PB-501-B User manual
Pebblebee
Pebblebee CLIP User manual
Pebblebee
Pebblebee Stone PB-501-B User manual
Popular GPS manuals by other brands
Garmin
Garmin Nuvi 1250T - Portable GPS Navigator Safety and product information
V7
V7 NAV700 Hardware manual
Keelin
Keelin GPT06-3G quick start guide
Lowrance
Lowrance Lowrance IWAY 350C Operation instructions
Garmin
Garmin N??VI 610 Quick reference guide
Magellan
Magellan SporTrak SporTrak Color User manual addendum