Pebblebee Honey Assembly instructions

MANUAL GUIDE
www.pebblebee.com
Model name:Honey
FCC ID:2AC2FHONEY
IC:12281A-HONEY

INDEX:
0www.pebbblebee.com
Enabling/disabling your PebbleBee device
Two ways to create/sign into your account
I
II
PebbleBee Hive Page II - VI
PebbleBee Monitor Device Page VII - IX
PebbleBee Device settings X
Alert Settings Page XI - XIII
Global Settings Page XIV

ENABLING/DISABLING YOUR PEBBLEBEE DEVICE
Iwww.pebbblebee.com
If your device is not detected on the main Hive page, your PebbleBee is probably in sleep
mode. To wake up your PebbleBee, press and hold down the side button for about 5 seconds
until you hear two consecutive beeps then release, putting your PebbleBee in transmit mode.
Your PebbleBee should appear in your hive now. If you haven't claimed your device, you can
do so at this time. To put your PebbleBee in sleep mode again, make sure to exit the
PebbleBee app on your phone to disconnect first, then press and hold down the side button
for about 5 seconds until you hear one beep then release. Your PebbleBee is now sleeping
and should stop transmitting.

TWO WAYS TO CREATE/SIGN
INTO YOUR ACCOUNT:
Login with your existing Facebook or
Twitter account.
Create a PebbleBee account using your
email address. Note your email address
must be correct and under your control.
Sign in with that information.
Forgot Password takes you to a link to
reset your PebbleBee account password.
If you are using a Facebook or Twitter
logon then reset your password directly
with Facebook.com or Twitter.com
II
1
2
3
1
2
3
www.pebbblebee.com

PEBBLEBEE HIVE PAGE
PebbleBee name and picture - As
specified by user
Range of PebbleBee - Green is near,
yellow is medium range, red is far range
Click on a PebbleBee entry for specific
monitoring and control to go into the
device page
This is where the user can view all
owned/shared or Unclaimed PebbleBees.
“Active” are PebbleBees that are currently
being detected. “Far Away” are PebbleBees
that are out of range but previously claimed.
“Silent” are PebbleBees shared to you but put
in “Private” mode so you cannot control or use
them.
III
1
2
2
1
www.pebbblebee.com

To monitor and control a PebbleBee, click
on an entry to enter the device page for
specific monitoring and control to go into
the device page
Unclaim device - This releases ownership
of the PebbleBee so that you can give
your PebbleBee away to someone. If this
icon does not appear the device is not
claimed and can be claimed.
Shared symbol - This means the device is
shared to you by someone. Shared
PebbleBees have a specific subset of
commands that can be performed
(explained on device page).
IV
3
4
5
4
5
3
www.pebbblebee.com

PebbleBee Friends - These are specified
family and friends that you may share
PebbleBees with or just want automatic
notification that they found your lost
PebbleBee!
Add a New Friend - Either by email or from
your Facebook friends (if you logged in
with Facebook)
Scan for new devices - Bluetooth scan
periods are limited on phones to preserve
battery life, so you can force an
immediate update
Logout - Exit current account so
another user can log in
V
6
7
9
8
8
9
7
6
www.pebbblebee.com

Global Settings - Brings up global settings
page
Swipe down - Reloads PB data from cloud,
this includes any new shared data. The
auto updates are limited to facilitate
limited data transfer and battery life of
the phone.
.
VI
10
11
10
11
www.pebbblebee.com

PEBBLEBEE MONITOR
DEVICE PAGE - CONTROL,
CONFIGURE AND MONITOR A
SPECIFIC PEBBLEBEE
Home Page - Back to Hive
PebbleBee Settings - Click to setup
Names and Pics for PebbleBee
Remaining Battery life in percentage
Buzz - Command PebbleBee to sound
device alarm
Spark -Command PebbleBee LED to light
up
VII
1
2
4
5
3
1
2
43
5
www.pebbblebee.com

Alert Settings - Takes you to configure all
alerts such as Range Alerts and
Multi-Function Button actions.
Locate - Shows a Pin on a google Map
indicating the last detected position. One
can click on pin for Last detected time.
Share - Choose your PebbleBee friends to
share this PebbleBee with. Scroll onto
name of friend and tap on select to
choose. At bottom of page you can view
friends you have shared this device with.
To unselect friends, just tap on the Friend
icon and confirm.
User can swipe left or right to switch
from one PebbleBee device page to
another
VIII
6
8
9
7
8
9
7
6
www.pebbblebee.com

Lost - Mark a device lost. When any
other PebbleBee App user comes into
range of your PebbleBee you will be noti-
fied with an alert. You can view the
found location on the “locate” button.
Private - This prevents updates to the
cloud for a specific PebbleBee. This also
prevents shared users from using or view-
ing current data about the device.
Release Bee - This unclaims the Pebble-
Bee so another user can claim/own it.
If a device is shared with you by someone else,
it will not display the bottom row of command
from 8-11.
IX
9
11
10
9
10
11
www.pebbblebee.com

PEBBLEBEE DEVICE SETTINGS
Click to take or choose a Picture for your
PebbleBee
Name and describe your PebbleBee as
will be seen on the Hive
X
1
2
1
2
www.pebbblebee.com

ALERT SETTINGS PAGE
On/Off - When Alert condition is met
Audio alert user on Phone
On/Off - When Alert condition is met
automatically Buzz on PebbleBee
Alert on Phone When Battery Life is low
Range Alert - PebbleBee left the hive -
PB has left immediate proximity
Range Alert - PebbleBee is getting lost -
PB has left Medium proximity
Range Alert - PebbleBee Out of reach –
PB has left communication Range
XI
1
2
3
4
5
6
1
2
5
3
4
6
www.pebbblebee.com

Range Alert - PebbleBee has come back
into range
Find your Phone - Click the Button and
force an alert on your phone to assist in
finding
Remote Control Shutter - Click the PB
Button to bring up your phone camera,
then click again to take any pictures.
This requires the PebbleBee app to be in
foreground on your phone in order to
activate the camera.
XII
7
8
9
7
8
9
www.pebbblebee.com
Multi-Function Button - A range of commands
as the result of pressing the Multi-function
Button. Current examples are:

Location Pairing - Choose a location that
you want to receive the specified alerts.
Clicking the plus sign brings up a map.
Click and Hold to add a new location and
Name.
Disable or enable specific locations at any
time. Choose to make the location inclu-
sive or exclusive (you want the alert in
that location or you want the alert when
not at that location) To delete or clear
any unwanted location pairings, swipe
sideways on entry and select delete.
Alert Settings Page continued
XIII
10
11
10
11
www.pebbblebee.com

GLOBAL SETTINGS PAGE
Tap to Take or choose a picture for your
Profile
Contact info will assist the PebbleBee
team in case an issue arises
Turning Cloud access off allows complete
privacy and prevents data from being
TX/RX to/from the cloud. This reduces
functionality for users, shared devices,
and lost functionality.
Click to change your password
XIII
1
2
3
3
1
2
www.pebbblebee.com
3
4

THANK YOU FOR CHOOSING THE PEBBLEBEE!
XIV www.pebbblebee.com
We hope to forge a lasting relationship with a
long product line currently in development of an
eco system of personal tracking and sensor
devices.
For support question please contact us at suppor[email protected]om
For any other inquiries please contact us at [email protected]


This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.


