Penn Elcom FT80-Q Assembly instructions

PRODUCT DATA SHEET
FT80-Q QUIET CUPBOARD COOLING UNIT
NEW


Technical Specifications
 22.5dBA !"#$%
•&'()*!+,-./%0&"""12*
•3$2
•456'")
•4&78(&""9
•&8(:/;$
•$$
•8(/
•<""92$=
•*3
•8:400401&<!3.94?3.98?4?%
•(@+""
•)6A&B@
OUTSIDE GRILLE
VIEW
INSIDE FAN
VIEW


,5!#C?%3(D

They can also be fitted into plastic cases and racks, using a different outside grille kit.
;4&78(2$=
9<""9CRC-LINK



Ther al Control
9CRC-TEMP2E*2:+"F
#"FG&F

=
NOT
REGULAR MONTHLY CLEANING OF THE FAN BLADES TO REDUCE ANY DEPOSIT BUILD UP IS ADVISED
USE A SMALL PAINT BRUSH DO NOT USE AN AIR BLOWER WITHOUT STOPPING THE BLADES
9-10 Parso s Road, Parso s I dustrial Estate, Washi gto Ty e & Wear, NE37 1HB, UK
0191 416 1717 or www.pe -elcom.com
2016 –FT80-Q Cupboard Exhaust Unit is the exclusive desi n copyri ht of Penn-Elcom UK NE37 1HB - E&OE
CRC
-
TEMP
500mA
-
PSU

FT80-Q FITTING GUIDE
You will
require an awl,
a cross head
screwdriver &
a 79mm (3⅛")
Hole Cutter.
Position and tape down the template
and mark out the hole centres with an
Awl as shown.
Next drill the 4 internal mounting holes
3mm (⅛") pilot holes to a max depth
of 10mm (⅜")
Drill the centre hole right through
Now using the 79mm
(3⅛") hole saw
Cut the hole out from
both sides to avoid
breakout damage
This picture
shows the
finished hole
preparation

9-10 Parsons Road, Parsons Industrial Estate, Washington Tyne & Wear, NE37 1H , UK
0191 416 1717 or www.penn-elcom.com
2016 –FT80-Q Cupboard Exhaust Unit is the exclusive desi n copyri ht of Penn-Elcom UK NE37 1HB - E&OE
Now offer up the fan unit and fix using
the 4 cross head screws provided.
DO NOT use longer screws Finally align the grille with outside
hole and press home firmly