Pensonic PF-31S User manual

TABLE FAN
PF-31S
INSTRUCTION
MANUAL

CONTENTS
Title Page No.
Parts Introduction 1
Technical Specifications 1
Before Using 1
How to Assemble Table Fan 2
How to Use Table Fan 2
Cleaning and Maintenance 2
Important Guidelines 2 –3
Thank you for choosing PENSONIC appliances. May you have an enjoyable experience using our
products.

Parts Introduction
1. Rear Guard
2. Speed Knob
3. Oscillation Knob
4. Motor
5. Stand
6. Cord Plug
7. Base
8. Guard Interlocking Nut
9. Fan Blade
10. Fan Blade Knob
11. Hook
12. Front Guard
13. Clip
Technical Specifications
Voltage
220-240V~
Wattage
45W
Frequency
50Hz
Blade Size
12” (300mm)
Before Using
Please read these instructions carefully before use and keep them for future reference.
Check your local main voltage whether it is the same as stated on the appliance.
Before using for the first time, remove any protective films or stickers from the table fan.
Ensure the power switch is at the “OFF” position.
1
2
3
4
5
6
7
13
12
11
8 9 10
1

How to Assemble Table Fan
Attach the rear guard to the front side of the motor; fasten the guard interlocking nut by turning
it clockwise until the guard is secured firmly in place.
Mount the fan blade onto the motor shaft; fasten the blade knob by turning anti-clockwise
firmly.
Installing the front guard:
- Open the front guard clip and attach the hook to the rear guard.
- Push the round edges of front guard to fit it securely into the rear guard.
- Lock the clip.
Installing the base:
- Fit the stand body to the base unit.
- Lead the power cord through the recess at the back of the base. Insert the rear side of the
stand body firmly until a „click‟ sound is heard.
- Ensure the stand body is completely interlocked with the base unit.
How to Use Table Fan
Connect the plug into a power supply socket and switch on the power.
Switch on the fan by turning the speed button at any of the “3”, “2” or “1” settings.
Turn the “3”, “2” or “1” button to adjust the fan speed from High-Medium-Low.
To stop the fan, turn the speed knob to the off position.
To tilt the fan, always ensure that the fan is at off position and wait until the blade has
completely stopped for safety reasons. Hold the stand firmly with one hand and move the guard
gently upwards or downwards.
The oscillation knob is positioned at the top rear side of the motor housing. Press the knob
down to make the fan oscillate or pull it up to stop the oscillation.
Cleaning and Maintenance
Always unplug the product from the wall socket and shut down completely prior to cleaning.
Do not use abrasive sponge, scouring pads or stiff brush to clean the appliance.
Please be cautious when cleaning the product near to the motor housing area.
Use only damp cloth to wipe the exterior surfaces of the unit. Do not immerse the main body in
water.
Do not allow the motor or other electrical components to be exposed to water.
For proper storage, always place the fan in a low humidity environment.
Important Guidelines
Use only original accessories supplied.
The current voltage which indicates on the plate must correspond to your local voltage.
The Table Fan should be used only on condition that the type of power supply corresponds to the
marking label. Otherwise, it willnot work or even be damaged.
Never use the unit unless it is fullyassembled.
Do not overload outlets or extension cords. It can result in fire or electric shock.
Do not use the appliance if the power supply cord or plug has been damaged.
2

This product is intended for indoor and household use only; not for outdoor, commercial and
industrial use.
Do not immerse the cord, plug or appliance in water or other types of liquid and do not pour water
onto it to avoid from fire, electrical shock or personal injury.
To protect against risk of electrical shock, do not force any foreign objects such as pins and wires into
any openings.
Do not pullthe cord to remove the plug from wall socket, pull on the plug instead.
Do not attempt to insert orremove the plug with wet hands.
Do not place the appliance on or near hot gas/electric burner, or a heated oven.
Do not let cord hang over the edge of table or counter or touch anyhot surfaces.
In the event not using the appliance for a long period of time, please remove the plug from the power
outlet.
Do not allow the motor or other electrical components to be exposed to water.
Never let children use electrical equipment without adult supervision.
Educate children about the danger and safetyrules associated with operating electrical equipment.
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has
been damaged in any manner. Repairs and services should always be carried out by PENSONIC
Customer Care/Service Centre.
3