peplink Pepwave MAX HD2 IP67 Operating instructions

Installation recommendation
Pole Mount
www.peplink.com
©Peplink. All rights reserved.
HD2 IP67
Steps:
1. Align the mounting unit to the
pole. Place the two
semicircular connectors
through the corresponding
holes in the mounting unit.
2. Attach a washer and nut to
each end of the semicircular
connectors to secure it to the
mounting unit.
3. Place the device on the
mounting unit, aligning the
holes on the lips of the
mounting unit to the holes in
the device.
4. Use washers and screws to
secure the device to the
mounting unit.

Installation recommendation
Horizontal Pole Mount
www.peplink.com
©Peplink. All rights reserved.
HD2 IP67
Steps:
1. Align the mounting unit to
the pole. Place the two
semicircular connectors
through the
corresponding holes in
the mounting unit.
2. Attach a washer and nut
to each end of the
semicircular connectors
to secure it to the
mounting unit.
3. Place the device on the
mounting unit, aligning
the holes on the lips of
the mounting unit to the
holes in the device.
4. Use washers and screws
to secure the device to
the mounting unit.

Installation recommendation
Wall Mount
www.peplink.com
©Peplink. All rights reserved.
HD2 IP67
Steps:
1. Drill four holes into the
wall according to the
position of the holes on
the mounting unit.
2. Insert wall plugs into
each of the drilled holes.
3. Align the mounting unit
vertically (large end of
light-bulb shaped holes
on top). Secure the
mounting unit to the wall
with screws.
4. Screw four screws
half-way into the holes
in the back of your
device.
5. Hang the device onto
the mounting unit.