PerfectTron INS8145A User manual

Version 1.0
Revision Date: July. 15. 2011
www.perfectron.com
INS8145A
ATX Industrial Motherboard
User’s Manual
User’s Manual

INS8145A ATX MB User’s Manual
www.perfectron.com
Safety information
Electrical safety
 To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
 When adding or removing devices to or from the system, ensure that the
power cables for the devices are unplugged before the signal cables are
connected. If possible, disconnect all power cables from the existing
system before you add a device.
 Before connecting or removing signal cables from the motherboard,
ensure that all power cables are unplugged.
 Seek professional assistance before using an adapter or extension cord.
These devices could interrupt the grounding circuit.
 Make sure that your power supply is set to the correct voltage in your
area.
 If you are not sure about the voltage of the electrical outlet you are using,
contact your local power company.
 If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Operation safety
 Before installing the motherboard and adding devices on it, carefully read
all the manuals that came with the package.
 Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
 To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
 Avoid dust, humidity, and temperature extremes. Do not place the product
in any area where it may become wet.
 Place the product on a stable surface.
 If you encounter technical problems with the product, contact a qualified
service technician or your retailer.
1

INS8145A ATX MB User’s Manual
www.perfectron.com
Statement
 All rights reserved. No part of this publication may be reproduced in any
form or by any means, without prior written permission from the publisher.
 All trademarks are the properties of the respective owners.
 All product specifications are subject to change without prior notice
Revision History
Revision Date (dd.mm.yyyy) Changes
Version 1.0 15,07,2011 Initial release
Packing list
□ INS8145A Industrial ATX Motherboard
□ I/O shield
□ 1 x SATA cable (7 Pin)
□ 2 x COM port cable with bracket (2.54mm)
□ 1xUSB Cable (2.54mm)
□ Driver CD
□ Quick Installation Guide
□ User’s Manual
If any of the above items is damaged or missing, contact your
retailer.
2

INS8145A ATX MB User’s Manual
www.perfectron.com
Table of Contents
Safetyinformation.............................................................................................................1
Electricalsafety..........................................................................................................1
Operationsafety.........................................................................................................1
Statement...................................................................................................................2
RevisionHistory..........................................................................................................2
Packinglist..................................................................................................................2
Chapter1:ProductInformation.........................................................................................6
1.1BlockDiagram......................................................................................................6
1.2KeyFeatures.........................................................................................................7
1.3BoardPlacement..................................................................................................9
1.5MechanicalDrawings.........................................................................................11
Chapter2:JumpersandConnectors................................................................................12
JumperSettings........................................................................................................12
2.1:JCMOS1:ClearCMOSJumperSetting........................................................12
2.2:JUSB_01:USB1,2,3,4PowerSelection.......................................................12
2.3:PSON1:ATX/ATmodeSelection................................................................12
2.4:JCOMPWR1‐6:COMPortSignal/PowerSelection.................................13
OnboardConnectorPinAssignment........................................................................13
2.5:EATXPWR1:24‐pinATXPowerInputConnector........................................13
2.6:ATX12V1:4‐pinATXPowerInputConnector.............................................13
2.7:COM2‐6:RS‐232BoxHeader.....................................................................14
2.8:SPDIF_OUT1:SPD/IFInput/OutputPinHeader.......................................14
2.9:AFP1:HDAUDIOFrontPanel.....................................................................14
2.10:DIMMA1/B1/A2/B2:DDR3MemoryDIMMSlot.......................................14
2.11:CPUFAN1:FANWafer...............................................................................14
2.12:SFAN1‐3:FANWaferConnector...............................................................15
2.13:FP1:FrontPanel10‐PinHeader...............................................................15
2.14:FP2:FrontPanel2‐PinHeader.................................................................15
2.15:PCI1‐4:32‐bit/33Mhz/5VPCISlot........................................................16
2.16:PCIEX16_1:StandardPCIExpressx16Slot..............................................17
2.17:PCIEX8_1:NoneStandardPCIExpressx8Slot(X4).................................18
2.18:PCIEX1Slot..............................................................................................19
2.19:SATAI1‐2:SerialATA3.0Connector..........................................................19
2.20:SATAI3‐6:SerialATA2.0Connector..........................................................19
2.21:USB4.5:USB2.0VerticalConnector.........................................................20
2.22:USB7‐14:USB2.0PinHeader...................................................................20
2.23:JTAG1:TAGPortBoxHeader....................................................................20
2.24:LPT1/ParallelPortBoxHeader.................................................................21
2.25:DIO1:DigitalInput/OutputPinHeader..................................................21
2.26:JCASE1:OpenCaseBoxHeader...............................................................21
RearPanelPinAssignments.....................................................................................22
2.27:AUDIO1:3Stack‐upHDAudioPhoneJack..............................................22
2.28:COM1(RS‐232/422/485PortADB‐9Connector)......................................22
2.29:RJ‐45+2USB2.0Connector...................................................................22
2.30:VGA1+DVI1:DVI‐D+DB15Connector.....................................................23
2.31:HDMIConnector......................................................................................24
3

INS8145A ATX MB User’s Manual
www.perfectron.com
2.32:KBMS1:PS/2KB/MSMini‐DINConnector................................................24
Chapter3:GettingStarted...............................................................................................25
3.1InstallingtheCPU...............................................................................................25
3.2SystemMemory.................................................................................................27
3.2.1MemoryConfigurations..................................................................................27
3.2.2MemoryModuleInstallation..........................................................................28
3.3DriverInstallation.............................................................................................28
Chapter4:AMIBIOSUTILITY...........................................................................................29
4.1Starting...............................................................................................................29
4.2NavigationKeys..................................................................................................29
4.3 MainMenu.........................................................................................................31
4.4 AdvancedMenu.................................................................................................32
OnboardLAN1Controller................................................................................33
OnboardLAN2Controller................................................................................33
PowerManagementConfiguration..................................................................34
ACPISleepState...............................................................................................35
RestoreACPowerLoss.....................................................................................36
ResumefromS3ByPS/2Keyboard..................................................................36
ResumefromS3ByPS/2Mouse......................................................................37
ResumeByPCIDevice......................................................................................37
ResumeByPCIEDevice....................................................................................38
ResumeByRingDevice....................................................................................38
ResumeByRTCAlarm......................................................................................39
WatchDogTimerConfiguration.......................................................................40
PCISubsystemSettings....................................................................................41
PCIROMPriority..............................................................................................42
PCILatencyTimer............................................................................................42
VGAPaletteSnoop...........................................................................................43
PERR#Generation............................................................................................43
SERR#Generation............................................................................................44
PCIedevicesRelaxedOrdering.........................................................................44
PCIeDevicesExtendedTag...............................................................................45
PCIeDevicesNoSnoop....................................................................................45
PCIeDevicesMaximumPayload......................................................................46
PCIeDevicesMaximumRequest......................................................................46
PCIExpressLinkSetting(ASPMSupport)..........................................................47
Note:Itisrecommendedtouseonly......................................................................47
PCIExpressLinkSetting(ExtendedSynchronizationpatterns).........................47
CPUConfiguration............................................................................................48
IntelHyperThreadingTech..............................................................................48
SATAConfiguration...........................................................................................49
SATAModeonIDEMode.................................................................................50
Serial‐ATAController0.....................................................................................50
Serial‐ATAController1.....................................................................................51
IntelIGDSWSCIOpRegion...............................................................................51
DVMTModeSelect..........................................................................................52
USBConfiguration............................................................................................52
4

INS8145A ATX MB User’s Manual
www.perfectron.com
LegacyUSBSupport .........................................................................................53
SuperI/OConfiguration...................................................................................54
H/WMonitor....................................................................................................55
PCHealthStatus...............................................................................................56
IntelAMTConfiguration...................................................................................56
IntelAMTConfiguration...................................................................................57
4.5TheChipsetMenu..............................................................................................58
LowMMIOAlign..............................................................................................58
IntegratedClockChipConfiguration................................................................61
IntegratedClockChipConfiguration(ICCEnabled)..........................................62
4.6BootMenu.........................................................................................................63
GateA20Active................................................................................................63
OptionROMMessages.....................................................................................64
Interrupt19Capture........................................................................................64
4.7SecurityMenu....................................................................................................65
AdministratorPassword...................................................................................65
UserPassword..................................................................................................66
4.7Save&ExitMenu...............................................................................................67
SaveChangeandReset....................................................................................68
DiscardChangesandReset..............................................................................68
SaveChangesandExit......................................................................................69
DiscardChangesandExit.................................................................................70
SaveChanges....................................................................................................71
DiscardChanges...............................................................................................72
RestoreDefaults ...............................................................................................73
SaveasUserDefaults .......................................................................................74
RestoreUserDefaults ......................................................................................75
APPENDIXAWatchdogTimerSetting..............................................................................77
APPENDIXBDIGITALI/O..................................................................................................79
5

INS8145A ATX MB User’s Manual
www.perfectron.com
Chapter 1: Product Information
1.1 Block Diagram



6

INS8145A ATX MB User’s Manual
www.perfectron.com
1.2 Key Features
Processor & System
CPU Type LGA1155 Intel® Core™ i7/i5/i3 processor supported
Chipset Intel®Q67 Express Chipset (Cougar Point) Controller Hub
Memory Type Four DDR3 800/1066/1333 240 pin DIMM slot
(Max capacity is 32GB)
BIOS AMI® UEFI BIOS
8MB SPI Flash
Super I/O NUVOTON NCT6776F
2nd I/O F81216AD
iAMT Support iAMT 7.0
Watchdog 1-255 sec. or 1-25 5 min. softwa re programmable and ca n
be generate system reset
Expansion Slot
PCIex 16 Gen.2 Slot 1
PCIex 1 Slot 1
PCIex 4 (x8 slot, one side open) 1
PCI slot 4
Display
Chipset Intel HD Graphics2000 Integrated Graphics engine
Onboard VGA Yes, Max.: SXGA 2048 x 1536
DVI Transmitter Built-in TI S N75DP139RGZR & Chrontel CH7318B-BF-TR
SDVO to DVI-D Transmitter
Dual Independent Displays
Capability
VGA+DVI-D
VGA+HDMI
HDMI+DVI-D
Audio
Codec ALC892 7.1+2 Channel High Definition Audio Codec
Ethernet
Controller Intel® 82579LM & 82574L GbE
Disable LAN through BIOS Yes
WOL Yes
Boot from LAN Yes for PXE
Rear I/O
VGA 1 Port(Max Resolution 2048x1536)
DVI-D Output 1 Port
HDMI Output 1 Port
Ethernet Port 2 Ports
Audio Jack Line-out, Mic-In, Line-in
USB 1.1/2.0 4 Ports
COM Port COM1 Port on Front I/O and supports RS232/422/485 with
5V/12V selectable
PS/2 Port 1 x PS/2 KB and Mouse (1 double stack mini-DIN)
I/O Interface
7

INS8145A ATX MB User’s Manual
www.perfectron.com
Serial ATA Port 2 x SATAIII (6Gb/s, reserve space)
4 x SATAII (3Gb/s S/W RAID 0,1,5,10)
USB Port 14 x USB 1.1/2.0 port
*4 Port on Front I/O
*8 Port by 2x5 pin 2.54mm Pin header
*2 vertical USB connectors
COM Port COM2~COM6 Port supports RS-232 with 5V/12V
selectable
SPDIF output 1x4 Pin-header
Front Panel 2x5 Pin-header
Digital IO 2x5 Pin-header(4 in and 4 out)
Parallel port 1 x LPT (2x13 pin 2.54mm BOX header)
Mechanical and Environment
Form Factor ATX
Power Type AT & ATX (24 pin + 4 pin)
Dimension 305 mm x 244 mm(12”x9.6”)
Operating Temperature 0°C-60°C
Storage Temperature -20°C-80°C
Relative humidity 10% to 90%, non-condensing
* Specifications are subject to change without notice*











8

INS8145A ATX MB User’s Manual
www.perfectron.com

1.3 Board Placement
9

INS8145A ATX MB User’s Manual
www.perfectron.com
1.4 Onboard Connector List

ConnectornameFunction
AFP1 HD AUDIO Front Panel
ATX12V1 4 pin ATX Power Input Connector
AUDIO1 3 Stack-up HD Audio Phone Jack
COM1 RS-232 / 422 / 485 COM1
COM2-6 RS-232 Port 2 Box Header
CPUFAN1 CPU FAN Wafer
DIMMA1-2 Primary DDR3 Memory DIMM Slot
DIMMB1-2 Secondary DDR3 Memory DIMM Slot
DIO1 Digital Input / Output Pin Header
EATXPWR1 24 pin ATX Power Input Connector
FP1-2 Front Panel Pin Header
HDMI1 HDMI Connector
JCASE1 Open case Box Header
JCOMPWR1-6 COM Signal / Power Selection
JCOMS1 Clear ME/CMOS Selection
JTAG1 Intel JTAG Box Header
JUSB_01 USB1234 Power Selection
KBMS1 PS/2 KB/MS Mini-DIN Connector
LAN1-2_USB1-4 LAN & USB2.0 Port Connector
LPT1 Parallel Port Box Header
PCI1-4 32-bit / 33Mhz / 5V-key PCI Slot
PCIEX1_1 Standard PCI Express x1 Slot
PCIEX16_1 Standard PCI Express x16 Slot
PCIEX8_1 None Standard PCI Express x8 Slot ( X4 )
PSON1 ATX/AT mode Selection
SATA1-2 Serial ATA 3.0 Connector
SATA3-6 Serial ATA 2.0 Connector
SPDIF_OUT1 SPD/IF Output Pin Header
SYSFAN1-3 System FAN Wafer
USB7-14 USB2.0 Port Pin Header
USB4-5 USB2.0 Port Vertical USB Connector
VGA1+DVI1 DVI-D + DB15 Connector
10

INS8145A ATX MB User’s Manual
www.perfectron.com
1.5 Mechanical Drawings


11

INS8145A ATX MB User’s Manual
www.perfectron.com
Chapter 2: Jumpers and Connectors
Jumper Settings

2.1:JCMOS1: Clear CMOS Jumper Setting
Jumper Function description Setting
1-2 Normal Operation
2-3 Clear CMOS
*Default setting is 1-2*
2.2:JUSB_01: USB1,2,3,4 Power Selection
Jumper Function description Setting
1-2 +5V
2-3 5V Standby
*Default setting is 1-2*
2.3: PSON1: ATX/AT mode Selection
Jumper Function description Setting
1-2 AT Mode
2-3 ATX Mode
*Default setting is 2-3*
12

INS8145A ATX MB User’s Manual
www.perfectron.com

2. 4: JCOMPWR1-6: COM Port Signal / Power Selection
Jumper Function description Setting
1 COM port Pin 9 = RI# 1-2 Enabled
2 COM port Pin 9 = +5V 3-4 Enabled
3 COM port Pin 9 = +12V 5-6 Enabled
Default setting is 1-2*
Onboard Connector Pin Assignment

2.5:EATXPWR1: 24-pin ATX Power Input Connector
2.6:ATX12V1: 4-pin ATX Power Input Connector
PinSignal Pin Signal
1GND2GND
3+12V 4+12V
PinSignal Pin Signal
1+3.3V 13 +3.3V
2+3.3V 14 ‐12V
3GND 15 GND
4+5V 16 PS_ON
5GND 17 GND
6+5V 18 GND
7GND 19 GND
8POWEROK 20 N/C
9+5VSB 21 +5V
10+12V 22 +5V
11+12V 23 +5V
12+3.3V24 GND
13

INS8145A ATX MB User’s Manual
www.perfectron.com
2.7:COM2-6: RS-232 Box Header










2.8:SPDIF_OUT1: SPD/IF Input / Output Pin Header
Pin SignalName
1SPDIF_IN
2GND
3SPDIF_OUT
4GND
2.9:AFP1: HD AUDIO Front Panel
PinSignal Pin Signal

1MIC2_L 2AGND
3MIC2_R 4ACZ_DET
5LIN2_R 6MIC2_JD
7SENSE 8NC
9LIN2_L 10 LINE2_JD
2.10:DIMMA1/B1/A2/B2: DDR3 Memory DIMM Slot
DIMMA1, DIMMB1: SOCKET DIMM DDR3 240P DIP ORANGE LEAD FREE
[KORTAK AR3120CC-MH9F]
DIMMA2, DIMMB2: SOCKET DIMM DDR3 240P DIP BLACK LAED FREE [KORTAK
AR3120CC-MH3]
2.11:CPUFAN1: FAN Wafer
PinSignal
1GND
2+12V
3FAN_RPM
4FAN_RPM_CTL
PinSignal

1DCD,Datacarrierdetect
2RXD,Receivedata
3TXD,Transmitdata
4DTR,Dataterminalready
5GND,ground
6DSR,Datasetready
7RTS,Requesttosend
8CTS,Cleartosend
9RI,Ringindicator
10NC
14

INS8145A ATX MB User’s Manual
www.perfectron.com
2.12:SFAN1-3: FAN Wafer Connector

PinSignal
1GND
2+12V
3FAN_RPM
2.13:FP1: Front Panel 10-Pin Header
Pin SignalPin Signal

1HDDLED+ 2 PowerLED+
3HDDLED‐ 4PowerLED‐
5ResetButton‐ 6PowerButton+
7ResetButton+ 8 PowerButton‐
910 NC

2.14:FP2: Front Panel 2-Pin Header
PinSignalPin Signal

1Speaker+2SMBusClock
3NC4SMBusData‐
5NC6GND
7Speaker‐ 8KeyboardLock
15

INS8145A ATX MB User’s Manual
www.perfectron.com
2.15:PCI1-4: 32-bit / 33Mhz / 5V PCI Slot
Pin Side B Side A
Pin Side B Side A
1-12V Reserved 35 IRDY# Ground
2 Reserved +12V 36 +3.3V TRDY#
3Ground Reserved 37 DEVSEL# Ground
4Reserved Reserved 38 Ground STOP#
5 +5V +5V 39 LOCK# +3.3V
6 +5V INTA# 40 PERR# SMB_CLK
7 INTB# INTC# 41 +3.3V SMB_DAT
8 INTD# +5V 42 SERR# Ground
9 Reserved GNT1# * 43 +3.3V PAR
10 Reserved +5V 44 C/BE[1]# AD[15]
11 Reserved IDSEL1 * 45 AD[14] +3.3V
12 Ground Ground 46 Ground AD[13]
13 Ground Ground 47 AD[12] AD[11]
14 Reserved +3.3VAUX 48 AD[10] Ground
15 Ground RST# 49 Ground AD[09]
16 CLK0 +5V 50 KEY
17 Ground GNT0# 51
18 REQ0# Ground 52 AD[08] C/BE[0]#
19 +5V PME# 53 AD[07] +3.3V
20 AD[31] AD[30] 54 +3.3V AD[06]
21 AD[29] +3.3V 55 AD[05] AD[04]
22 Ground AD[28] 56 AD[03] Ground
23 AD[27] AD[26] 57 Ground AD[02]
24 AD[25] Ground 58 AD[01] AD[00]
25 +3.3V AD[24] 59 +5V +5V
26 C/BE[3]# IDSEL0 60 Reserved Reserved
27 AD[23] +3.3V 61 +5V +5V
28 Ground AD[22] 62 +5V +5V
29 AD[21] AD[20]
30 AD[19] Ground
31 +3.3V AD[18]
32 AD[17] AD[16]
33 C/BE[2]# +3.3V
34 Ground FRAME#
16

INS8145A ATX MB User’s Manual
www.perfectron.com
2.16:PCIEX16_1: Standard PCI Express x16 Slot
PinSideBSideA

Pin SideBSideA
1+12VPRSNT#(B)35 Ground HSIP4
2+12V+12V36 Ground HSIP4
3+12V+12V37 HSOP5 Ground
4GroundGround38 HSON5 Ground
5SMCLKJTAG239 Ground HSIP5
6SMDATJTAG340 Ground HSIP5
7GroundJTAG441 HSOP6 Ground
8+3.3VJTAG542 HSON6 Ground
9JTAG1+3.3V43 Ground HSIP6
10+3VSB+3.3V44 Ground HSIP6
11WAKE#PWRGD45 HSOP7 Ground
12ReservedGround46 HSON7 Ground
13GroundREFCLK+47 Ground HSIP7
14HSOP0REFCLK‐ 48 PRSNT#3 HSIP7
15HSON0Ground49 Ground Ground
16GroundHSIP050 HSOP8 Reserved
17PRSNT#1HSIP051 HSON8 Ground
18GroundGround52 Ground HSIP8
19HSOP1Reserved53 Ground HSIP8
20HSON1Ground54 HSOP9 Ground
21GroundHSIP155 HSON9 Ground
22GroundHSIP156 Ground HSIP9
23HSOP2Ground57 Ground HSIP9
24HSON2Ground58 HSOP10 Ground
25GroundHSIP259 HSON10 Ground
26GroundHSIP260 Ground HSIP10
27HSOP3Ground61 Ground HSIP10
28HSON3Ground62 HSOP11 Ground
29GroundHSIP363 HSON11 Ground
30ReservedHSIP364 Ground HSIP11
31PRSNT#2Ground65 Ground HSIP11
32GroundReserved66 HSOP12 Ground
33HSOP4Reserved67 HSON12 Ground
34HSON4Ground68 Ground HSIP12
  69 Ground HSIP12
17

INS8145A ATX MB User’s Manual
www.perfectron.com
2.17: PCIEX8_1: None Standard PCI Express x8 Slot (X4)
PinSideBSideA

Pin SideBSideA
1+12VPRSNT#(
B)35ReservedReserved
2+12V+12V36 Reserved Reserved
3+12V+12V37 Reserved Reserved
4GroundGround38 Reserved Reserved
5SMCLKJTAG239 Reserved Reserved
6SMDATJTAG340 Reserved Reserved
7GroundJTAG441 Reserved Reserved
8+3.3VJTAG542 Reserved Reserved
9JTAG1+3.3V43 Reserved Reserved
10+3VSB+3.3V44 Reserved Reserved
11WAKE#PWRGD45 Reserved Reserved
12ReservedGround46 Reserved Reserved
13GroundREFCLK+47 Reserved Reserved
14HSOP0REFCLK‐ 48 Reserved Reserved
15HSON0Ground49 Reserved Reserved
16GroundHSIP0
17PRSNT#1HSIP0
18GroundGround
19HSOP1Reserved
20HSON1Ground
21GroundHSIP1
22GroundHSIP1
23HSOP2Ground
24HSON2Ground
25GroundHSIP2
26GroundHSIP2
27HSOP3Ground
28HSON3Ground
29GroundHSIP3
30ReservedHSIP3
31ReservedGround
32GroundReserved
33ReservedReserved
34ReservedReserved

18

INS8145A ATX MB User’s Manual
www.perfectron.com

2.18: PCIEX1 Slot
PinSideBSideA

1+12V+3.3V
2+12V+3.3V
3+3.3VAUX Ground
4WAKE# REFCLK+
5RST#REFCLK‐
6Ground Ground
7PETp0 PERp0
8PETn0 PERn0
9Ground Ground
10PETp1 PERp1
11PETn1 PERn1
12SMB_CLK SMB_DAT
13Ground Ground
14PETp2 PERp2
15PETn2 PERn2
16Ground Ground
17NCNC
18NCNC

2.19:SATAI1-2: Serial ATA 3.0 Connector
PinSignalName

1GND
2TX+
3T
X
‐
4GND
5R
X
‐
6RX+
7GND

2.20:SATAI3-6: Serial ATA 2.0 Connector
PinSignalName

1GND
2TX+
3T
X
‐
4GND
5R
X
‐
6RX+
7 GND
19