Asus B85M-VIEW PAKER User manual

Motherboard
B85M-VIEW PAKER

ii
E9731
First Edition
January 2015
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data,
you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from http://support.asus.com/download
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notication to the email address [email protected], stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).

iii
Contents
Safety information...................................................................................................... iv
About this guide......................................................................................................... iv
Package contents....................................................................................................... vi
B85M-VIEW PAKER specifications summary.......................................................... vi
Product introduction
1.1 Before you proceed .....................................................................................1-1
1.2 Motherboard overview.................................................................................1-2
1.3 Central Processing Unit (CPU) ...................................................................1-4
1.4 System memory ...........................................................................................1-7
1.5 Expansion slots ......................................................................................... 1-10
1.6 Headers.......................................................................................................1-12
1.7 Connectors .................................................................................................1-13
1.8 Software support ....................................................................................... 1-22
BIOS information
2.1 Managing and updating your BIOS ............................................................2-1
2.2 BIOS setup program ....................................................................................2-6
2.3 My Favorites ...............................................................................................2-10
2.4 Main menu ..................................................................................................2-11
2.5 Ai Tweaker menu........................................................................................2-13
2.6 Advanced menu .........................................................................................2-18
2.7 Monitor menu .............................................................................................2-27
2.8 Boot menu ..................................................................................................2-30
2.9 Tool menu...................................................................................................2-35
2.10 Exit menu....................................................................................................2-36
Appendices
Notices ..................................................................................................................... A-1
ASUS contact information...................................................................................... A-3

iv
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied service
technician or your retailer.
Operation safety
• Before installing the motherboard and adding components, carefully read all the manuals
that came with the package.
• Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may be exposed to moisture.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualied service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and conguring the
motherboard.
How this guide is organized
This guide contains the following parts:
• Chapter1:Productintroduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes descriptions of the switches, jumpers, and connectors on the
motherboard.
• Chapter2:BIOSinformation
This chapter discusses changing system settings through the BIOS Setup menus.
Detailed descriptions for the BIOS parameters are also provided.

v
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1. ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2. Optional documentation
Your product package may include optional documentation, such as warranty yers,
that may have been added by your dealer. These documents are not part of the
standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when
completing a task.
CAUTION: Information to prevent damage to the components when
completing a task
IMPORTANT: Instructions that you MUST follow to complete a
task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text Indicates a menu or an item to select.
Italics Used to emphasize a word or a phrase.
<Key> Keys enclosed in the less-than and greater-than sign
means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).

vi
B85M-VIEW PAKER specifications summary
(continued on the next page)
CPU LGA1150 socket for the 4th Generation Intel®CoreTM i7/ CoreTM i5/ CoreTM
i3, Pentium®, and Celeron®Processors
Supports 22nm CPU
Supports Intel®Turbo Boost Technology 2.0*
* The Intel®Turbo Boost Technology 2.0 support depends on the CPU types.
** Refer to www.asus.com for Intel®CPU support list.
Chipset Intel®B85 Express Chipset
Memory 2 x DIMM, max. 16GB, DDR3 1600 / 1333 / 1066 MHz, non-ECC, un-
buffered memory
Dual-channel memory architecture
Supports Intel® Extreme Memory Prole (XMP)
* Hyper DIMM support is subject to the physical characteristics of individual CPUs.
Refer to Memory QVL for details.
** Due to Intel®chipset limitation, the DDR3 1600MHz and higher memory modules
on XMP mode will run at the maximum transfer rate of DDR3 1600MHz.
*** Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).
Graphics Integrated graphics processor - Intel®HD Graphics support
Multi-VGA output support: DVI-D/D-Sub ports
- Supports DVI-D with max.resolution of 1920 x 1200 @60Hz
- Supports D-Sub with max. resolution of 1920 x 1200 @60Hz
Maximum shared memory of 1024 MB
Expansion slots 1 x PCI Express 3.0/2.0 x16 slot (@ x16 mode)
1 x PCI Express 2.0 x16 slot (@ x4 mode)
1 x mSATA/mPCIe slot (full length)*
* Full length mini PCIe shares the same slot with mSATA. When a mini PCIe card
is installed, mSATA will not be usable.
Storage Intel®B85 Express Chipset:
- 2 x Serial ATA 6.0 Gb/s connectors
- 2 x Serial ATA 3.0 Gb/s connectors
- Supports Intel®Rapid Start Technology and Intel®Smart Connect
Technology*
* These functions will work depending on the CPU installed.
LAN Realtek®RTL8111GR PCIe Gigabit LAN Controller
Package contents
Check your motherboard package for the following items.
Motherboard ASUS B85M-VIEW PAKER motherboard
Cables 1 x Serial ATA 6.0 Gb/s cable
Accessories 1 x I/O Shield
Application DVD Support DVD
Documentation User Guide
If any of the above items is damaged or missing, contact your retailer.

vii
B85M-VIEW PAKER specifications summary
Audio 7.1-channel Realtek® ALC887 High Denition Audio CODEC
- Supports Jack-Detection, Front Panel Jack-Retasking and Anti-pop
function
* Use a chassis with HD audio module in the front panel to support a
7.1-channel audio output.
USB Intel®B85 Express Chipset- supports ASUS USB 3.0 Boost:
- 4 x USB 3.0 ports (2 ports at midboard, 2 ports at back panel)
Intel®B85 Express Chipset:
- 6 x USB 2.0 ports (2 ports at midboard, 4 ports at back panel)
Rear panel I/O ports 1 x PS/2 mouse port (green)
1 x PS/2 keyboard port (purple)
1 x DVI-D port
1 x D-Sub port
1 x LAN (RJ-45) port
4 x USB 2.0 ports
2 x USB 3.0 ports
3 x Audio jacks support 7.1-channel audio output
Internal connectors 1 x USB 3.0 connector supports additional 2 USB 3.0 ports
1 x USB 2.0 connector support additional 2 USB 2.0 ports
2 x SATA 3.0 Gb/s connectors
2 x SATA 6.0 Gb/s connectors
1 x 2-pin Clear CMOS header
1 x 4-pin CPU Fan connector (PWM mode)
1 x 4-pin Chassis fan connector (PWM mode)
1 x Chassis intrusion connector
1 x DVI header
1 x Front panel audio connector (AAFP)
1 x System panel connector
1 x Speaker connector
1 x 24-pin EATX power connector
1 x 4-pin ATX 12V power connector
BIOS features 128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS
2.7, ACPI 4.0a, Multi-language BIOS, ASUS EZ Flash 2, ASUS CrashFree
BIOS 3, My Favorites, Quick Note, Last Modied log, F12 PrintScreen, F3
Shortcut functions
Manageability WfM 2.0, DMI 2.0, WOL by PME, PXE
Support DVD Drivers
ASUS utilities
EZ Update
Anti-virus software (OEM version)
Operating System
Support
Windows®8.1 (32bit/64bit), Windows®8 (32bit/64bit), Windows®7
(32bit/64bit)
Form factor mATX form factor: 8.3 in x 8.0 in (21.1 cm x 20.3 cm)
Specications are subject to change without notice.

viii

ASUS B85M-VIEW PAKER 1-1
Product introduction
1
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplugthepowercordfromthewallsocketbeforetouchinganycomponent.
• Beforehandlingcomponents,useagroundedwriststraportouchasafelygrounded
objectorametalobject,suchasthepowersupplycase,toavoiddamagingthemdue
to static electricity.
• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.
• Wheneveryouuninstallanycomponent,placeitonagroundedantistaticpadorinthe
bag that came with the component.
• Beforeyouinstallorremoveanycomponent,ensurethattheATXpowersupplyis
switched off or the power cord is detached from the power supply. Failure to do so
maycauseseveredamagetothemotherboard,peripherals,orcomponents.

1-2 Chapter 1: Product introduction
1.2 Motherboard overview
Beforeyouinstallthemotherboard,studythecongurationofyourchassistoensurethatthe
motherboardts.
Unplugthepowercordbeforeinstallingorremovingthemotherboard.Failuretodosocan
cause you physical injury and damage to motherboard components.
1.2.1 Placement direction
Wheninstallingthemotherboard,placeitintothechassisinthecorrectorientation.Theedge
with external ports goes to the rear part of the chassis as indicated in the image.
1.2.2 Screw holes
Place four screws into the holes indicated by circles to secure the motherboard to the
chassis.
Donotovertightenthescrews!Doingsocandamagethemotherboard.
B85M-VIEW PAKER
Place this side
towards the rear
of the chassis

ASUS B85M-VIEW PAKER 1-3
1.2.3 Motherboard layout
1.2.4 Layout contents
Connectors/Jumpers/Slots/LED Page
1. DVIheader(18-pinDVI2) 1-19
2. ATXpowerconnectors(24-pinEATXPWR,4-pinATX12V) 1-15
3. Intel®LGA1150CPUsocket 1-4
4. CPUandchassisfanconnectors(4-pinCPU_FAN,4-pinCHA_FAN) 1-17
5. DDR3DIMMslots 1-7
6. Intel®B85SerialATA3.0Gb/sconnectors(7-pinSATA3G_1~2) 1-17
7. Intel®B85SerialATA6.0Gb/sconnectors(7-pinSATA6G_1~2) 1-18
8. Systempanelconnector(10-1pinF_PANEL) 1-21
9. Speakerconnector(4-pinSPEAKER) 1-16
10. ClearRTCRAM(2-pinCLRTC) 1-12
11. Chassisintrusionconnector(4-1pinCHASSIS) 1-20
12. mSATA/mPCIeslot(MSATA_MPCIE) 1-20
13. Frontpanelaudioconnector(10-1pinAAFP) 1-16
14. USB2.0connector(10-1pinUSB1314) 1-19
15. USB3.0connector(20-1pinUSB3_12) 1-18
B85M-VIEW PAKER
PCIEX16_2
PCIEX16_1
RTL
8111GR
AAFP
EATXPWR
CPU_FAN
BATTERY
Super
I/O
ALC
887
KBMS
DVI VGA
DVI2
CLRTC
SPEAKER
8.3cm(21.1in)
DDR3 DIMM_A1 (64bit, 240-pin module) DDR3 DIMM_B1 (64bit, 240-pin module)
SATA3G_1 SATA3G_2SATA6G_1 SATA6G_2
MSATA_MPCIE
AUDIO
LAN_USB34
USB3_56
USB910
CHA_FAN
8.0cm(20.3in)
LGA1150
DIGI
+VRM
Intel®
B85
ATX12V
F_PANEL
USB1314 USB3_12
CHASSIS
ASM1480
128Mb
BIOS
1 2 543
1011
4
9
2
8
6
7
13
14
15
12

1-4 Chapter 1: Product introduction
1.3 Central Processing Unit (CPU)
ThismotherboardcomeswithasurfacemountLGA1150socketdesignedforthe4th
GenerationIntel®Core™i7/Core™i5/Core™i3,Pentium® ,andCeleron®processors.
1.3.1 Installing the CPU
1
A
B
UnplugallpowercablesbeforeinstallingtheCPU.
• Uponpurchaseofthemotherboard,ensurethatthePnPcapisonthesocketand
thesocketcontactsarenotbent.ContactyourretailerimmediatelyifthePnPcap
ismissing,orifyouseeanydamagetothePnPcap/socketcontacts/motherboard
components.
• Keepthecapafterinstallingthemotherboard.ASUSwillprocessReturnMerchandise
Authorization(RMA)requestsonlyifthemotherboardcomeswiththecaponthe
LGA1150socket.
• Theproductwarrantydoesnotcoverdamagetothesocketcontactsresultingfrom
incorrectCPUinstallation/removal,ormisplacement/loss/incorrectremovalofthePnP
cap.
B85M-VIEW PAKER
B85M-VIEW PAKER CPU socket LGA1150

ASUS B85M-VIEW PAKER 1-5
23
A
B
C
5
4

1-6 Chapter 1: Product introduction
1.3.2 CPU heatsink and fan assembly installation
ApplytheThermalInterfaceMaterial
totheCPUheatsinkandCPU
before you install the heatsink and
fan if necessary.
3 4
To install the CPU heatsink and fan assembly
2
B
A
A
B
1

ASUS B85M-VIEW PAKER 1-7
A
B
B
A
To uninstall the CPU heatsink and fan assembly
2
1
1.4 System memory
1.4.1 Overview
ThismotherboardcomeswithtwoDoubleDataRate3(DDR3)DualInlineMemoryModule
(DIMM)sockets.ADDR3modulehasthesamephysicaldimensionsasaDDR2DIMMbut
isnotcheddifferentlytopreventinstallationonaDDR2DIMMsocket.DDR3modulesare
developedforbetterperformancewithlesspowerconsumption.Thegureillustratesthe
locationoftheDDR3DIMMsockets:
Channel Sockets
ChannelA DIMM_A1
ChannelB DIMM_B1
B85M-VIEW PAKER
B85M-VIEW PAKER 240-pin DDR3 DIMM sockets
DIMM_A1 DIMM_B1

1-8 Chapter 1: Product introduction
1.4.2 Memory configurations
Youmayinstall1GB,2GB,4GB,and8GBunbufferednon-ECCDDR3DIMMsintotheDIMM
sockets.
• YoumayinstallvaryingmemorysizesinChannelAandChannelB.Thesystem
mapsthetotalsizeofthelower-sizedchannelforthedual-channelconguration.Any
excessmemoryfromthehigher-sizedchannelisthenmappedforsingle-channel
operation.
• AccordingtoIntelCPUspec,DIMMvoltagebelow1.65Visrecommendedtoprotect
theCPU.
• AlwaysinstallDIMMswiththesameCASlatency.Foroptimalcompatibility,we
recommendthatyouinstallmemorymodulesofthesameversionordatecode(D/C)
fromthesamevendor.Checkwiththeretailertogetthecorrectmemorymodules.
• Duetothememoryaddresslimitationon32-bitWindows®OS,whenyouinstall4GB
ormorememoryonthemotherboard,theactualusablememoryfortheOScanbe
about3GBorless.Foreffectiveuseofmemory,werecommendthatyoudoanyofthe
following:
- Useamaximumof3GBsystemmemoryifyouareusinga32-bitWindows®OS.
 - Installa64-bitWindows®OSifyouwanttoinstall4GBormoreonthe
motherboard.
 - Formoredetails,refertotheMicrosoft®support site at http://support.microsoft.
com/kb/929605/en-us.
• ThismotherboarddoesnotsupportDIMMsmadeupof512megabits(Mb)chipsor
less.
• ThedefaultmemoryoperationfrequencyisdependentonitsSerialPresenceDetect
(SPD),whichisthestandardwayofaccessinginformationfromamemorymodule.
Underthedefaultstate,somememorymodulesforoverclockingmayoperateata
lowerfrequencythanthevendor-markedvalue.Tooperateatthevendor-marked
oratahigherfrequency,refertosection2.5 Ai Tweaker menu for manual memory
frequencyadjustment.
• Forsystemstability,useamoreefcientmemorycoolingsystemtosupportafull
memoryload(2DIMMs)oroverclockingcondition.
• VisittheASUSwebsiteat:www.asus.com for the latest QVL.

ASUS B85M-VIEW PAKER 1-9
1.4.3 Installing a DIMM
1
2
3
To remove a DIMM
B
A

1-10 Chapter 1: Product introduction
1.5 Expansion slots
Inthefuture,youmayneedtoinstallexpansioncards.Thefollowingsub-sectionsdescribe
the slots and the expansion cards that they support.
Unplugthepowercordbeforeaddingorremovingexpansioncards.Failuretodosomay
cause you physical injury and damage motherboard components.
1.5.1 Installing an expansion card
To install an expansion card:
1. Beforeinstallingtheexpansioncard,readthedocumentationthatcamewithitand
make the necessary hardware settings for the card.
2. Removethesystemunitcover(ifyourmotherboardisalreadyinstalledinachassis).
3. Removethebracketoppositetheslotthatyouintendtouse.Keepthescrewforlater
use.
4. Alignthecardconnectorwiththeslotandpressrmlyuntilthecardiscompletely
seated on the slot.
5. Securethecardtothechassiswiththescrewyouremovedearlier.
6. Replacethesystemcover.
1.5.2 Configuring an expansion card
Afterinstallingtheexpansioncard,congureitbyadjustingthesoftwaresettings.
1. TurnonthesystemandchangethenecessaryBIOSsettings,ifany.SeeChapter2for
informationonBIOSsetup.
2. AssignanIRQtothecard.
3. Installthesoftwaredriversfortheexpansioncard.
WhenusingPCIcardsonsharedslots,ensurethatthedriverssupport“ShareIRQ”orthat
thecardsdonotneedIRQassignments.Otherwise,conictswillarisebetweenthetwoPCI
groups,makingthesystemunstableandthecardinoperable.
1.5.3 mSATA/mPCIe slot
ThismotherboardsupportsmSATA/mPCIeslotthatsupportsfulllengthmSATAormPCIe
module.
1.5.4 PCI Express 2.0 x16 slot
ThismotherboardhasaPCIExpress2.0x16slotthatsupportsPCIExpress2.0x16graphic
cardscomplyingwiththePCIExpressspecications.
1.5.5 PCI Express 3.0/2.0 x16 slot
ThismotherboardhasaPCIExpress3.0/2.0x16slotthatsupportsPCIExpress3.0/2.0x16
graphiccardscomplyingwiththePCIExpressspecications.

ASUS B85M-VIEW PAKER 1-11
IRQ assignments for this motherboard
A B C D E F G H
IGD shared – – – – – – –
Audiocontroller – – ––––shared –
EHCIcontroller1 –– – – – – – shared
EHCIcontroller2 –– – – shared – – –
XHCIcontroller ––– – – shared – –
SATAcontroller – – – shared – – – –
PCIEX16_1 shared – – –– – – –
PCIEX16_2 –shared – – – – ––
RTL8111GR –shared ––––– –
• InsingleVGAcardmode,usethePCIe3.0/2.0x16_1slotforaPCIExpressx16
graphics card to get better performance.
• WerecommendthatyouprovidesufcientpowerwhenrunningCrossFireX™mode.
Seepage1-15fordetails.
• ConnectachassisfantothemotherboardconnectorlabeledCHA_FANwhenusing
multiplegraphicscardsforbetterthermalenvironment.
VGA configuration PCI Express operating mode
PCIe 3.0/2.0 x16_1 PCIe 2.0 x16_2
Single VGA/PCIe
card
x16(RecommendedforsingleVGA
card) N/A
Dual VGA/PCIe
card x16 x4

1-12 Chapter 1: Product introduction
1.6 Headers
Clear RTC RAM (2-pin CLRTC)
ThisheaderallowsyoutocleartheRealTimeClock(RTC)RAMinCMOS.Youcan
cleartheCMOSmemoryofdate,time,andsystemsetupparametersbyerasingthe
CMOSRTCRAMdata.TheonboardbuttoncellbatterypowerstheRAMdatain
CMOS,whichincludesystemsetupinformationsuchassystempasswords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Useametalobjectsuchasascrewdrivertoshortthetwopins.
3. PlugthepowercordandturnONthecomputer.
4. Holddownthe<Del>keyduringthebootprocessandenterBIOSsetuptore-
enter data.
• Ifthestepsabovedonothelp,removetheonboardbatteryandshortthetwopins
againtocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,reinstallthe
battery.
• YoudonotneedtocleartheRTCwhenthesystemhangsduetooverclocking.For
systemfailureduetooverclocking,usetheCPUParameterRecall(C.P.R.)feature.
Shutdownandrebootthesystem,thentheBIOSautomaticallyresetsparameter
settingstodefaultvalues.
B85M-VIEW PAKER
B85M-VIEW PAKER Clear RTC RAM
CLRTC
+3V_BAT GND
PIN 1