Perform FX Blizzard 600 User manual

Blizzard 600
PFXSNOW6 Instruction Manual
CAUTION - ATTENTION - VORSICHT
RISK OF ELECTRIC SHOCK- DO NOT OPEN
RISQUE D’ELECTROCUTION - NE PAS OUVRIR
STROMSCHLAGGEFAHR - NICHT OFFNEN
In Compliance wit t e following directives: RoHS Directive (2002/95/EU) and
WEEE directive (2002/96/EU)
If t is product is no longer functional or reac ed t e end of its usable life, please
take it to an approved recycling plant.

User Manual
PFXSNOW6 Blizzard 600
Dear Customer,
Thank you for purchasing the Perform FX B izzard 600. With decades of experience in design and production,
Perform FX is one of the eading manufacturers of professiona effects machines and ighting equipment.
This unit has been designed and manufactured to the highest of standards so you can be assured you have
made a good investment.
For your safety and to ensure you make fu use of a the B izzard 600 features, p ease make sure you read
this manua in fu .
Safety Advice:
1. Read this manua in fu before operating this product.
2. Keep this manua in a safe p ace for future reference.
3. Heed a warnings and instructions, both in this manua and on the product.
4. Carry and transport this product with care. Dropping this product may resu t in serious mechanica fai ure.
5. The manufacturer accepts no responsibi ity for injury or damage caused as a resu t of not fo owing the
manua provided.
6. Turn off and unp ug this machine from mains supp y when not in use.
7. This machine is not water proof and shou d not be used outside.
8. In the event of any iquid entering the housing, unp ug immediate y & contact a qua ified engineer.
Protection from Electric S ock:
1. On y connect this unit to a mains socket with suitab e trip and RCD protection.
2. To disconnect from the mains socket, a ways remove by the mains p ug. Do not attempt to remove by
pu ing the mains cab e.
3. Disconnect the unit from the mains supp y before c eaning. C eaning shou d be carried out with a soft, dry
c oth.
4. Do not expose this unit to any iquids.
5. Do not operate near exposed water or in high humidity.
6. Choose a suitab e route for mains cab es, ensuring trip hazards are avoided and the mains cab e is not at
risk of being crushed.
7. Do not open this unit to service. There are no user serviceab e parts inside. Any servicing or repairs shou d
be carried out by a qua ified engineer on y. Any attempt to service or adapt this unit wi eave your warranty
void and cou d resu t in serious ma function or injury.
Protection from Fire:
1. Do not p ace near sources of heat or ignition.
2. Do not cover or b ock any venti ation ho es.
3. Check your AC wa socket wi take the power you are app ying to avoid over oading the mains supp y.

Protection from Injury and Damage:
1. Do not attempt to modify this unit.
2. A ways insta the unit in a suitab e ocation where vibrations to the unit are avoided.
3. Check this unit matches the mains vo tage and frequency before p ugging it in to your mains socket.
4. In the event that any object or iquid enters the machine, switch off immediate y, remove from mains and
consu t a qua ified engineer.
5. Shou d you experience any ma function or damage to the mains cab e, disconnect from the mains supp y
immediate y and consu t a qua ified engineer.
6. A parts shou d be rep aced with genuine spare parts and carried out by a qua ified engineer.
Danger:
1. For operation by adu ts on y. This unit must be insta ed out of reach of chi dren.
2. Never eave the machine running unattended.
3. Do not put the output nozz e c ose to any ones face.
4. Do not cover the machine vents. In order to guarantee adequate venti ation, a ow a free air space of at
east 20cm around a sides of the machine.
Safety & Protecting Your Mac ine:
1. Do not add iquids of any kind, especia y f ammab e iquids to this machine or its intended f uid. Use on y
water based f uid, specifica y designed for effects machines.
2. Use high qua ity water based iquid, recommended by your dea er to reduce c ogging.
3. During operation ensure there is sufficient f uid in the tank. Operating without f uid wi damage the pump.
4. If your machine fai s to work, disconnect immediate y, remove a iquid and return in origina packing to
your dea er.
5. A ways drain the tank before transporting.
6. Do not drink fog, haze, snow or bubb e iquid and avoid contact with the skin and eyes. If ingested ca a
doctor immediate y. In the event of f uid coming into contact with your skin, rinse thorough y with warm
water.
Contents & Unpacking:
Before beginning your initia setup check the unit has not been damaged in transit. In the event there is
damage to the housing, cab e or interna components contact your dea er immediate y.
Specification:
Code: PFXSNOW6
Mains Supp y: 240Vac 50Hz
Power: 600 Watts
Dimensions: 345 x 185 x 200mm
Weight: 3.5kg
A 600 watt foam snow machine with wired remote contro .
Features Include:
• A 600 watt Fan.
• 1L F uid Tank.
• Wired remote contro .
• Hanging Bracket.

First Time Operation:
Before you start using this unit, p ease check there is no transportation damage, shou d there be any, p ease
do not use the device and contact your dea er immediate y.
Put the snow machine on a f at stab e surface.
Unscrew the id on the f uid bott e, fi up with a suitab e snow iquid, take care not to over fi . Then screw the
p astic cap back on. Make sure the tank never runs dry during operation.
Connect the wired remote contro .
Connect the B izzard 600 to a suitab e mains supp y.
The snow machine is ready to use.
Press the remote button.
Maintenance:
Do not a ow iquid to become contaminated. A ways rep ace the cap on the iquid container immediate y
after fi ing. Run some disti ed water through the pump and fan by fi ing the tank with with the water. This
shou d be done if the machine is not to be used for a month and after every 20 hours of use.