Pericat S400 User manual

封面
User Manual
Jump Staer
Model: S400

CUSTOMER SUPPORT
www.pericatstore.com
[email protected]
1-833-300-9545
-1-
www.pericatstore.com
[email protected] 1-833-300-9545

PARAMETERS
PACKAGE INCLUDE
1 x Jump Staer
2 x Jumper Clamps
1 x Type-C Charging Cable
1 x User Manual
1 x Microber Storage Bag
Model:
Staing Current:
Peak Current:
Capacity:
Staing Voltage:
Power Input:
Power Output 1:
Power Output 2:
Lifetime:
Suitable For:
S400
500A
1500A
44.4Wh
12V
TYPE-C 5V/2A Charging Input Po
5V/1A USB Output Po
5V/2.1A USB Output Po
1000+Cycles
Up to 7.0L Gas/5.5L Diesel Engine
-2-
www.pericatstore.com
[email protected] 1-833-300-9545

STRUCTURE
⑧
③
①
④
⑤
⑦
②
⑥
Power Button
1Emergency Light Button 2
LED Emergency Light
3Jump Sta Po 4
5V/2.1A USB Output
Po 2
55V/1A USB Output
Po 1
6
USB Type-C 5V/2A
Charging Input Po
7Digital Screen 8
-3-
www.pericatstore.com
[email protected] 1-833-300-9545

-4-
www.pericatstore.com
[email protected] 1-833-300-9545

Inse the Type-C charging cable into the USB Type-C 5V/2A
Charging Input Po to sta charging.
How the LCD Screen Displays:
1. When charging the jump staer, the "IN" character lights up,
and the power percentage number ashes. It will stop
ashing after fully charged, and the LCD Display will turn o
after 10 seconds.
2. If the charger is unplugged while charging, the LCD Display
will turn o.
-5-
www.pericatstore.com
[email protected] 1-833-300-9545

How to Charge other devices
Press the power button.
How to turn on the LED light
1. Press the power button.
2. Press and hold the light button for 2 seconds to turn on the
LED light. After turning on the LED light, sho press the light
button once to switch to the "SOS" mode.
3. After turning on the "SOS" mode, press the light button once
to switch to the warning mode.
4. Sho press the light button again to switch to lighting mode.
5. Press and hold the light button for 2 seconds to furn o the
LED light.
Plug the charging cable into the USB
output po of the jump staer.
-6-
www.pericatstore.com
[email protected] 1-833-300-9545

How to sta the vehicle
Please use Type-C charging cable in the package to fully charge
the jump staer before using it for the rst time.Before use,
please make sure the power of the jump staer is above 50%.
Plug the jump cable into the jump
sta po.
1.
Connect the black clamp to the
negativeIIpole of the car batte,and
the redclamp to the positive "+" pole
of the carbatte.
2.
Sta your car engine in 30 seconds.3.
Remove the clamps from the car batte
4.
-7-
www.pericatstore.com
[email protected] 1-833-300-9545

1. It is forbidden to directly bite the black and red clamps together
to prevent the product from sho-circuiting.
2. It is forbidden to disassemble the jump staer.
3. It is forbidden for children to use the jump staer alone without
the guidance of their parents.
4. It is forbidden to expose and store the jump staer in wet
environments or near corrosive materials.
5. It is forbidden to use the product in an overheated and humid
environment or near a re source.
6. If the jump staer has abnormal swelling, leakage, or odor,
please stop using it immediately and notify the after-sales team.
7. Do not sta the vehicle continuously, allow at least 1 minute
between each jump sta.
8. Please use the Type-C charging cable included in the package to
fully charge the product before rst use.
9. Please charge the jump staer at least one time in eve three
months.
10. After staing the car, please wait at least 30 minutes before
charging the jump staer.
11. This jump staer can be used to sta the engine with a 12V
batte, do not to sta the engine with a 24V batte.
12. Be sure to use the standard clamps that come with the jump
staer to sta the vehicle.
-8-
www.pericatstore.com
[email protected] 1-833-300-9545

Made in china
CUSTOMER SUPPORT
www.pericatstore.com
suppo@pericatstore.com
1-833-300-9545