Phantom Tech DCM7005 User manual

Register your product and get support at
www.philips.com/welcome
EN User manual 3
DE Benutzerhandbuch 25
ES Manual del usuario 47
FR Mode d’emploi 69
IT Manuale utente 93
NL Gebruiksaanwijzing 117
PT Manual do utilizador 141
SV Användarhandbok 163
DCM7005
DCM7005_12_UM_Book1_V4.0.indb 1 4/30/2014 10:22:24 AM

(in standby mode)
(in standby mode)
DCM7005_12_UM_Book1_V4.0.indb 2 4/30/2014 10:22:25 AM

3
English
EN
Contents
1 Important 4
Safety 4
Notice 5
2 Your Micro Hi-Fi System 8
Introduction 8
What’s in the box 8
Product overview 9
3 Get started 12
Connect speakers 12
Connect FM antenna 12
Connect power 13
Prepare the remote control 13
Set clock 14
Turn on 14
Demonstrate the unit’s features 14
Adjust brightness of display panel 14
Turn on or off LED light 14
4 Play 15
Basic play operations 15
Play from disc 15
Play from USB 16
Adjust sound 16
5 Play from iPod/iPhone/iPad 17
Compatible iPod/iPhone/iPad 17
Listen to the iPod/iPhone/iPad 17
Charge the iPod/iPhone/iPad 17
Remove the iPod/iPhone/iPad 17
6 Listen to FM radio 18
Plug & Play Installation 18
Tune to FM radio stations 18
Program radio stations automatically 18
Program radio stations manually 18
Tune to a preset radio station 19
Show RDS information 19
7 Other features 20
Set alarm timer 20
Set the sleep timer 20
Listen to external audio device 20
Listen through headphone 21
8 Product information 22
Specications 22
USB playability information 23
Supported MP3 disc formats 23
9 Troubleshooting 24
DCM7005_12_UM_Book1_V4.0.indb 3 4/30/2014 10:22:25 AM

4
hDo not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including ampliers)
that produce heat.
iProtect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
jOnly use attachments/accessories
specied by the manufacturer.
kUse only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
lUnplug this apparatus during lightning
storms or when unused for long periods
of time.
m Refer all servicing to qualied service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
nBattery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
• Install all batteries correctly, + and -
as marked on the unit.
• Do not mix batteries (old and new
or carbon and alkaline, etc.).
1 Important
Safety
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an
electrical shock. For the safety of everyone
in your household, please do not remove
product covering.
The ‘exclamation mark’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
WARNING:Toreducetheriskofreor
electric shock, this apparatus should not be
exposedtorainormoistureandobjectslled
with liquids, such as vases, should not be
placed on this apparatus.
CAUTION: To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs: To prevent electric shock, match wide
blade to wide slot.)
Important Safety Instructions
aRead these instructions.
bKeep these instructions.
cHeed all warnings.
dFollow all instructions.
eDo not use this apparatus near water.
fClean only with dry cloth.
gDo not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
EN
DCM7005_12_UM_Book1_V4.0.indb 4 4/30/2014 10:22:25 AM

5
English
• Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
• Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
• Be sure to use your equipment
reasonably and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for
reasonable periods of time.
• Be careful not to adjust the volume as
your hearing adapts.
• Do not turn up the volume so high that
you can’t hear what’s around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding,etc.;itmaycreateatrafc
hazard and is illegal in many areas.
Notice
Anychangesormodicationsmadetothis
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
• Remove batteries when the unit is
not used for a long time.
• Batteries (battery pack or batteries
installed) shall not be exposed to
excessiveheatsuchassunshine,re
or the like.
oApparatus shall not be exposed to
dripping or splashing.
pDo not place any sources of danger on
the apparatus (e.g. liquid lled objects,
lighted candles).
qWhere the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never place this apparatus on other electrical
equipment.
•Keep this apparatus away from direct sunlight,
nakedamesorheat.
•Never look into the laser beam inside the
apparatus.
•Ensure that you always have easy access to the
power cord, plug or adaptor to disconnect the
apparatus from the power.
Caution
•Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Hearing safety
Listen at a moderate volume.
• Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
EN
DCM7005_12_UM_Book1_V4.0.indb 5 4/30/2014 10:22:26 AM

6
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
The making of unauthorized copies of
copy-protected material, including computer
programs,les,broadcastsandsound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
“Made for iPod,” “Made for iPhone,” and
“Made for iPad” mean that an electronic
accessory has been designed to connect
specicallytoiPod,iPhone,oriPad,
respectively,andhasbeencertiedbythe
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards. Please
note that the use of this accessory with
iPod, iPhone, or iPad may affect wireless
performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad
is a trademark of Apple Inc.
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment
and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
EN
DCM7005_12_UM_Book1_V4.0.indb 6 4/30/2014 10:22:27 AM

7
English
This apparatus includes this label:
Class II equipment symbol:
CLASS II apparatus with double insulation,
and no protective earth provided.
Note
•The type plate is located at the rear of the
apparatus.
Norge
Typeskiltnnespåapparatensunderside.
Observer: Nettbryteren er sekundert innkoplet.
Den innebygde netdelen er derfor ikke
frakopletnettetsålengeapparatetertilsluttet
nettkontakten.
Foråreduserefarenforbrannellerelektrisk
støt, skal apparatet ikke utsettes for regn eller
fuktighet.
EN
DCM7005_12_UM_Book1_V4.0.indb 7 4/30/2014 10:22:27 AM

8
What’s in the box
Check and identify the contents of your
package:
• Main unit
• Loudspeaker boxes x 2
• AC power cord
• Speaker connection cables
• MP3 link cable
• FM antenna
• Remote control with 2 AAA batteries
• User manual
2 Your Micro Hi-
Fi System
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.Philips.com/welcome.
Introduction
With this unit, you can:
• enjoy audio from discs, USB devices, iPod,
iPhone, iPad and other external devices
• listen to radio stations
You can enrich sound output with these sound
effects:
• Treble and Bass Control
• Loudness Control
The unit supports these media formats:
EN
DCM7005_12_UM_Book1_V4.0.indb 8 4/30/2014 10:22:27 AM

9
English
i/
• Search backward or forward.
• Search to a radio station.
j
• Stop play.
• (In standby mode) Turn on/off Demo
mode.
k
• Open or close the disc
compartment.
lIR sensor
• Detect signals from the remote
control. Always point the remote
control at the IR sensor.
mVOLUME
• Adjust volume.
• Adjust time.
nDisplay panel
oDisc compartment
Product overview
Main unit
aDock of iPod, iPhone and iPad.
b/
• Skip to the previous/next track.
• Select a preset radio station.
cSOURCE
• Select a source.
d
• Turn on this product
• Switch to Eco Power standby or
standby mode.
e
• Start or pause play.
f
• ConnecttoaUSBashdrive.
gMP3 LINK
• Connect to an external audio device.
h
• Headphone socket.
EN
DCM7005_12_UM_Book1_V4.0.indb 9 4/30/2014 10:22:30 AM

10
cSHUFFLE
• Play tracks randomly.
dSLEEP
• Set the sleep timer.
e
• Navigate through the menus.
• : Skip to previous/next album;
fRDS/INFO
• For selected FM radio stations:
display RDS information.
• Display the current status or the disc
information.
• Display the ID3 information (if
available) of MP3 tracks.
g
• Stop play.
• (In standby mode) Turn on/off Demo
mode.
h/
• Skip to the previous/next track.
• Select a preset radio station.
i/
• Search backward or forward.
• Search to a radio station.
jTREBLE
• Activate treble level
kBASS
• Activate bass level
lNumeric keypad
• Select a track directly.
mSHIFT
• Enter a two or three-digit number
(with the numeric keypad).
nPROGRAM
• Program radio stations.
oCLOCK
• Set the clock.
• Display the set clock.
Remote control
a
• Turn on this product.
• Switch to Eco Power standby or
standby mode.
bDIM
• Adjust brightness of display panel.
• (Press and hold) Turn on or off the
LED light at the bottom of the unit
and at the volume knob.
EN
DCM7005_12_UM_Book1_V4.0.indb 10 4/30/2014 10:22:31 AM

11
English
pVOL +/-
• Adjust volume.
• Adjust time.
qLOUDNESS
• Turn on or off automatic loudness
adjustment.
r
• Mute or restore volume.
s
• Start or pause play.
tMENU
• Access iPod/iPhone menu.
uOK
• Conrmanentryorselection.
v
• Open or close the disc
compartment.
wTIMER
• Set alarm timer.
xREPEAT
• Select a repeat play mode.
ySource buttons
• Select a source.
EN
DCM7005_12_UM_Book1_V4.0.indb 11 4/30/2014 10:22:31 AM

12
For the main unit side:
1Unscrew the speaker connectors.
2Insert fully the red end of a speaker cable
into the left red (+) connector.
3Screw the left red (+) connector to
secure the cable.
4Insert fully the silver end of a speaker
cable into the left black (-) connector.
5Screw the left black (-) connector to
secure the cable.
6Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
For the speaker side:
1Unscrew the speaker connectors.
2For the left speaker, identify the speaker
cable that is connected to the left
connectors on the main unit.
3Insert fully the red end of the speaker
cable into the red (+) connector.
4Screw the red (+) connector to secure
the cable.
5Insert fully the silver end of the speaker
cable into the black (-) connector.
6Screw the black (-) connector to secure
the cable.
7Repeat steps 2-6 for the right speaker.
Connect FM antenna
SPEAKER OUTANTENNA
FM
DEMO
RR
AUX INLINE OUT
LL
COAXIALVIDEO
RL
FM
3 Get started
Caution
•Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
•Ensure that the colors of the speaker wires and
terminals are matched.
•For optimal sound, use the supplied speakers
only.
•Connect only speakers with impedance that is
the same or higher than the supplied speakers.
RefertotheSpecicationssectionofthis
manual.
1
2
3
DEMO
d
e
f
EN
DCM7005_12_UM_Book1_V4.0.indb 12 4/30/2014 10:22:32 AM

13
English
Prepare the remote control
Caution
•Risk of explosion! Keep batteries away from
heat,sunshineorre.Neverdiscardbatteries
inre.
To insert the remote control battery:
1Open the battery compartment.
2Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3Close the battery compartment.
Note
•If you are not going to use the remote control
for a long time, remove the batteries.
•Do not use old and new or different types of
batteries in combination.
•Batteries contain chemical substances, so they
should be disposed of properly.
a
b
c
Tip
•For optimal reception, fully extend and adjust
the position of the antenna.
•For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
socket.
•The unit does not support MW radio
reception.
1Connect the supplied FM antenna to the
FM ANTENNA socket on the main unit.
Connect power
Caution
•Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
•Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
•Before you connect the AC power cord,
ensure that you have completed all other
connections.
1Connect the power cable to:
• the AC~ jack on the main unit.
• the wall socket.
SPEAKER OUTANTENNA
FM
DEMO
RR
AUX INLINE OUT
LL
COAXIALVIDEO
RL
AC MAIN ~
EN
DCM7005_12_UM_Book1_V4.0.indb 13 4/30/2014 10:22:33 AM

14
Demonstrate the unit’s
features
In the standby mode, press until “DEMO
ON” is displayed.
»Available features are displayed one by one.
• To turn off the demonstration, press
again.
Adjust brightness of display
panel
Press DIM repeatedly to select different
brightness levels.
Turn on or off LED light
In power-on mode, press and hold DIM to
turn on or off the LED light at the bottom of
the unit and at the volume knob.
Set clock
1In standby mode, press CLOCK for 3
seconds to activate clock setting mode.
»[CLOCK SET] scrolls on the display,
then the time format [24H] or [12H]
appears.
2Press VOL +/- to select 24H or 12H, then
press CLOCKtoconrm.
»The hour digits begin to blink.
3Press VOL +/- to set hour, then press
CLOCK again.
»The minute digits begin to blink.
4Press VOL +/- to set minute.
5Press CLOCKtoconrmtheclock
setting.
Note
•If no button is pressed in 90 seconds, the
system exits clock setting mode automatically.
Turn on
1Press .
»The unit switches to the last selected
source.
Switch to standby mode
Press to switch the Hi-Fi system to standby
mode.
»The clock (if set) appears on the display
panel.
To switch the system to Eco Power Standby
mode:
In standby mode, press and hold for 2
seconds.
»[ECO POWER] (Eco power) scrolls on the
display, then the backlight turns off.
EN
DCM7005_12_UM_Book1_V4.0.indb 14 4/30/2014 10:22:33 AM

15
English
Play from USB
Warning
•Ensure that the USB device contains playable
audio contents for supported formats.
1Flip open the cover marked on the
front panel.
2Insert the USB device into the USB
socket.
3Press USB to select the USB source.
»Play starts automatically. If not, press
ALBUM/ to select a folder and
/ toselectale.ThenpressOK to
start play.
Adjust sound
During play, you can adjust volume through
following operations.
4 Play
Basic play operations
You can control play through following
operations.
Key Function
/ Press and hold to fast-forward/
fast-reverse the track during
playback, then release to resume
play.
To pause/resume play during
playback.
INFO select different play information.
REPEAT To select a repeat play mode:
[REP] (repeat): play current track
repeatedly.
[REP ALL] (repeat all): play all
tracks repeatedly.
Press again to return to normal
play.
SHUFFLE To play tracks randomly.
Press again to return to normal
play.
Play from disc
1Press DISC to select the CD source.
2Press .
»The disc compartment opens.
3Place a disc with the printed side facing
up, then press .
4Play starts automatically.
• If play does not start, press / to
select a track, then press .
EN
DCM7005_12_UM_Book1_V4.0.indb 15 4/30/2014 10:22:34 AM

16
Key Function
VOL +/- To increase/decrease the
volume.
To mute/restore sound.
LOUDNESS To turn on/off automatic
loudness control.
BASS Press BASS to activate bass
level, and then adjust with
VOL +/-.
TREBLE Press TREBLE to activate
treble level, and then adjust
with VOL +/-.
EN
DCM7005_12_UM_Book1_V4.0.indb 16 4/30/2014 10:22:34 AM

17
English
• To pause/resume play, press .
• To skip to a track, press / .
• To search during play: press and hold
/ , then release to resume
normal play.
• To navigate the menu: press MENU
and / to select items, then press
OKtoconrm.
Note
•When iPod/iPhone/iPad source is selected, you
cannot enjoy audio through the headphone
socket.
Charge the iPod/iPhone/iPad
The docked iPod/iPhone/iPad begins to charge
as soon as the unit is connected to AC power.
Note
•iPod with color display, iPod classic, and iPod
with video are not compatible with dock
charging.
Remove the iPod/iPhone/iPad
1Pull the iPhone/iPod/iPad off the dock.
2Flip down the lid to hide the dock.
5 Play from iPod/
iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this unit.
Compatible iPod/iPhone/iPad
The unit supports the following iPod, iPhone,
and iPad models:
Made for.
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
generation)
• iPod touch (1st, 2nd, 3rd and 4th
generation)
• iPod Mini
• iPhone
• iPhone 3G
• iPhone 3GS
• iPhone 4
• iPad
Listen to the iPod/iPhone/
iPad
1Press DOCK to select the iPhone/iPod/
iPad source.
2Open the iPhone/iPod/iPad dock on the
top panel and place the iPhone/iPod/iPad
in the dock.
EN
DCM7005_12_UM_Book1_V4.0.indb 17 4/30/2014 10:22:35 AM

18
To tune to a weak station:
Press / repeatedlyuntilyoundoptimal
reception.
Tip
•[STEREO] is default setting for tuner mode.
•Under tuner mode, you can press OK
repeatedly to toggle between [STEREO] and
[MONO], and the unit memorizes your setting
even if you turn off the unit or turn to other
sources.
Program radio stations
automatically
Note
•You can program a maximum of 20 preset
radio stations.
1In tuner mode, press and hold
PROGRAM for 2 seconds to activate
automatic program mode.
»[AUTO] (auto) is displayed and begins
to blink.
»Therstprogrammedradiostationis
broadcast automatically.
Program radio stations
manually
Note
•You can program a maximum of 20 preset
radio stations.
1Tune to a radio station.
2Press PROGRAM to activate
programming.
6 Listen to FM
radio
Plug & Play Installation
when the unit turn to Radio mode, and No
radio stations are stored, [AUTO INSTALL -
PRESS PLAY, STOP CANCEL] (to auto install,
press ; to cancel, press ) displays.
1Press on the main unit to start
installation.
»The unit automatically stores radio
stationswithsufcientsignalstrength.
»When all the available radio stations
arestored,therstpresetradiostation
is broadcast automatically.
Toexit Plug and Play installation mode
2press source keys or on the remote
control.
»The system switches to the designated
source mode or standby mode.
Tune to FM radio stations
Warning
•Ensure that you have connected and fully
extended the supplied FM antenna.
1Press RADIO.
2Press and hold / to search to a
radio station.
3When the frequency starts to change,
release the button.
»The FM tuner tunes to a station with
strong reception automatically.
4Repeat steps 2-3 to tune to more
stations.
EN
DCM7005_12_UM_Book1_V4.0.indb 18 4/30/2014 10:22:35 AM

19
English
Synchronize clock with RDS
You can synchronize time shown on the unit
with that on the RDS station.
1Tune to a RDS radio station that
transmits time signals.
2Press RDS for over 2 seconds.
»[CT SYNC] is displayed and the unit
reads RDS time automatically.
»If no time signal is received, [NO CT]
is displayed.
Note
•The accuracy of the transmitted time depends
on the RDS station that transmits the time
signal.
3Press / to allocate a number from
1 to 20 to this radio station, then press
PROGRAMtoconrm.
»The preset number and the frequency
of the preset station are displayed.
4Repeat the above steps to program other
stations.
Note
•To overwrite a programmed station, store
another station in its place.
Tune to a preset radio station
1Press / to select a preset number
that you want.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to a RDS station, a RDS
icon and the station name are displayed.
1Tune to a RDS station.
2Press RDS repeatedly to scroll through
the following information (if available):
»Station name
»Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
»RDS clock
»Frequency
EN
DCM7005_12_UM_Book1_V4.0.indb 19 4/30/2014 10:22:35 AM

20
Activate/deactivate alarm timer
1In standby mode, press TIMER repeatedly
to activate or deactivate timer.
»If timer is activated, is displayed.
Tip
•Alarm timer is not available in MP3 LINK
mode.
•If CD/USB/iPod/iPhone source is selected,
yet no disc is placed or no USB/iPod/iPhone
connected, the system switches to the tuner
source automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
»When sleep timer is activated, the
display shows .
To deactivate sleep timer
1Press SLEEP repeatedly until “SLEEP
OFF” is displayed.
»When sleep timer is deactivated,
disappears.
Listen to external audio
device
You can listen to an external audio device such
as MP3 player through this unit.
1Connect the audio device.
• For audio device with red/white
audio output sockets:
Connect a red/white audio cable
(not supplied) to the AUX IN
sockets and to the audio output
sockets on the audio device.
7 Other features
Set alarm timer
This unit can be used as an alarm clock.You
can select CD, Dock, iPod/iPhone playlist, FM or
USB as alarm source.
Note
•Make sure that you have set the clock
correctly.
1In standby mode, press and hold TIMER
until [TIMER SET] scrolls on the display.
2Press source buttons on the remote
control to select a source: CD, FM, USB,
Dock or iPod/iPhone playlist.
• If iPod/iPhone playlist is selected
as alarm source, you need create a
playlist called “PHILIPS” in your iPod/
iPhone.
• If no playlist called “PHILIPS” is
created in the iPod/iPhone or no
track is stored in the playlist, the
unit switches to iPod/iPhone alarm
source.
3Press TIMERtoconrm.
»The hour digits are displayed and begin
to blink.
4Press VOL +/- repeatedly to set hour,
then press TIMERagaintoconrm.
»The minute digits are displayed and
begin to blink.
5Press VOL +/- to set minute, then press
TIMERtoconrm.
»VOL (volume) is displayed and begins
to blink.
6Press VOL +/- to adjust volume, then
press TIMERtoconrm.
EN
DCM7005_12_UM_Book1_V4.0.indb 20 4/30/2014 10:22:36 AM