UHF
channel
UHF frequency
(MHz)
Switch
1
Switch
2
Switch
3
Switch
4
Switch
5
Switch
6
Switch
7
Switch
8
41 631.25 0 1 0 1 0 0 TEST
42 639.25 0 1 0 1 0 1 TEST
43 647.25 0 1 0 1 1 0 TEST
44 655.25 0 1 0 1 1 1 TEST
45 663.25 0 1 1 0 0 0 TEST
46 671.25 0 1 1 0 0 1 TEST
47 679.25 0 1 1 0 1 0 TEST
48 687.25 0 1 1 0 1 1 TEST
49 695.25 0 1 1 1 0 0 TEST
50 703.25 0 1 1 1 0 1 TEST
51 711.25 0 1 1 1 1 0 TEST
52 719.25 0 1 1 1 1 1 TEST
53 727.25 1 0 0 0 0 0 TEST
54 735.25 1 0 0 0 0 1 TEST
55 743.25 1 0 0 0 1 0 TEST
56 751.25 1 0 0 0 1 1 TEST
57 759.25 1 0 0 1 0 0 TEST
58 767.25 1 0 0 1 0 1 TEST
59 775.25 1 0 0 1 1 0 TEST
60 783.25 1 0 0 1 1 1 TEST
61 791.25 1 0 1 0 0 0 TEST
62 799.25 1 0 1 0 0 1 TEST
63 807.25 1 0 1 0 1 0 TEST
64 815.25 1 0 1 0 1 1 TEST
65 823.25 1 0 1 1 0 0 TEST
66 831.25 1 0 1 1 0 1 TEST
67 839.25 1 0 1 1 1 0 TEST
68 847.25 1 0 1 1 1 1
TEST
69 855.25 1 1 0 0 0 0
TEST
Please note: when selecting the UHF output frequency, notice that Switch 7 is not
used. Switch 8 is used to turn the SLxRF modulator's test signal on and off.
When tuning and programming the SLxRF modulator's channel into your TV, the
test signal will show if your TV is correctly tuned in. If it is correctly tuned in, a
black screen with two white stripes will show on your TV:
Depending on what AV equipment you have and how you wish to view it, there are
many different ways of connecting your equipment to the SLxRF modulator and the
modulator to your TV. The most typical examples are shown here.
You are not limited to using a single SLxRF modulator - modulators can be
connected in series so you can connect multiple pieces of equipment to your TV.
If you are in any doubt, contact our Customer CareLine (08457 573 479) or e-mail
C. Setting the output frequency (continued)
D. Connecting your SLxRF modulator
5
4 5
