Philips/Magnavox VRZ255AT01 User manual

Owner's Manual
Importantl
Return your Warranty Registration
Card within IO days. See why In_

•.# . ° o +_ ,•
Onceyour PHILIPSMAGNAVOX purchaseis reds.re.red, youreeligib!eto receive;all the prmleges
ofowningaPHILIPSMAGNAVOXprodu_&_iiPn_lete andreturntheWarran_Re_st:rntion
Cardenclosedwithyourpurchaseat cadvantageoftheseimportantbehests.
IPHILIPS
Congratulations on your purchase, and
welcome to the "family!"
Dear PHILIPS MAGNAVOX product owner:
Thank you for your confidencein PHIUPS HAGNAVOX.You've
selected one of the best-built,best-backedproductsavailable
today.And we'll do everythingin our power to keep you happy
with your purchasefor manyyears to come.
As a member of the PHIUPS HAGNAVOX"family," you're entitled
to protection by one of the most comprehensivewarranties and
outstandingservice networks in the industry.
What's more, your purchaseguaranteesyou'll receive all the infor-
mation and speciatoffers for which you qualify,pluseasyaccessto
_accessories from,our convenienthome shoppingnetwork.
,'And most importantly you cancount.on our uncompromising
i'c_mmitment to your total,satisfaction.
_AII 0f this_ls our way of sayingwelcome-and thanks for investingin
a PHILIPS HAGNAVOX product.
Sincerely,
Robert Hinkhorst
Presidetlt and Chief ExecutiveOfficer
RS. ]Remember, to get the most from your PHILIPS
PIAGNAVOX product, you must return your
Warranty Registration Cardwithin 10 days.So
please mall it to us Hght ni)wl .
Know these
safetys mbols
_k This"bolt of Eghtning"indicates
uninsulated material within
your unit maycauseanelectricalshock.
For the safety of everyone in your
household,pleasedo not remove prod-
uct coverin_
_kThe "exdamadon point" calls
attention to featuresfor which
you shouldread the enclosedliterature
closelyto prevent operatingand main-
mnanceproblemL
WARNING: TO PREVENT RRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
+_ HOISTURE+
CAUTION:To preventelectricshock.
matchwide blade of pfegcow_deslot.
andfully insert.
ATTENTION: Pour 6viter fes chocs
6fec_ques, inttoduire la lame El plus
large de la fiche dartsla home corm-
spondante de la prise et pousser
jusqu'aufond.
For Customer Use
Enter belowthe SerialNo.
whichis locatedon the rear
of the cabinet.Retainthis
informationfor futurerefer-
ence.
Model No.
SerialNo.

Introduction3
Welcome to yourVCR owner's manual.
This manualhassix sections:SettingUpYourVCR; Descriptionof Controls;BasicOperations;Recording;
Playing;andInformationYou May Need.The instructionsexplainall ofthe VCR'sfeatures,which arelisted
below.
Features
Automatic Channel Setup
Automatic Clock Setting
Automatic Head Cleaner
Daylight- SavingTime
Hi-Fi Stereo Tape Playback
Index Search
Multi-Channel Television Sound (MTS) System
19 Micron Head
On-Screen Menus in English, Spanish,or French
Quick Programming
•"Remote Control with Capability to Operate'IV, Cable Box, and Direct
Broadcast System (DBS)
•Repeat Play
•Skip Search
•VCR Plus+ Programming System
Safety Precautions
Warning:To prevent fire or shock hazard, do not expose this equip-
ment to rain or moisture.
FCC Warning:Any unauthorized changes or modifications to this
equipment void the user's authority to operate it,
ThisVCR, equippedwith a High Quality (HQ) System,iscompatiblewith existing
Video Home System(VHS) equipment.ThisVCRalso isequippedwith S-VHS
Quasi Playback(SQPB),allowingyouto playS-VHS recordings with regularVHS
resolution.However,you may not record on S-VHStapeswith thisVCR.
Thisproducthasa 19 micron headwhichprovidesa better picturewhen you
viewtapes recorded in slow speed(SLP).
Philips ConsumerElectronicsCompanyrecommends that youuseonlyvideo
cassettetapes that havebeen tested and inspectedfor useintwo, four, six,and
eighthourVCRs,andwhichare labelledwith the _ mark.The useoftapes
that havenot beeninspectedfor usein two, four,six,and eighthourVCRs may
result in poor picture qualityand excessivedepositson the videoheads,which
may not be coveredbythe warrantyif damageoccurs.
Note to the CableTV System Installer:This reminder is provided to call the
Cable TV system installers attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding - in particular, specifying
that the cable ground shall be connected to the grounding system of the build-
ing, as close to the point of cable entry as possible.
Operation is subject to the following two conditions: (I) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Copyright 1998 PhilipsConsumer ElectronicsCompany.All
rights reserved.
VCR Plus+ and PlusCode aretrademarks of Gemstar
Development Corporation.TheVCR Plus+ systemismanufac-
tured under licensefrom Gemstar Development Corporation.
The ENERGY STAR"name andlogo are registered marks of the
U.S.EnvironmentalProtection Agency.AsanENERGY STAR"
Partner, Philips Consumer ElectronicsCompanyhasdetermined
that this productor productmodel meets the ENERGY STAR•
guidelinesfor energyefficiency.

4 TableofContents
Setting UpYourVCR
Introduction ........... ............... . ............................... 3
Table of Contents ........ _............................................. 4
Before UsingYour VCR .................................................. 5
Hookups Without a Cable Box ......................................... 6 - 7
HookupsWith a Cable Box/Direct Broadcast System ........................ 8 - 9
Turning on Your VCR .................................................. I0
Automatic Channel Seeup ........................................... 11 - 12
Setting the Clock ................................................. 13 -17
Daylight-Saving Time ................................................... 18
LanguageSelection .................................................... 19
Description of Controls
Remote Control Buttons ........................................... 20 -2 I
Display Panel ........................................................ 22
Front Panel .......................................................... 23
Rear Panel .......................................................... 24
On-Screen Status Displays .............................................. 25
Setting the Remote Control to Operate a'lV ............................... 26
Setting the Remote Control to Operate aCable BoxiDBS ..................... 27 /-
Basic Operations
Playing ............................................................. 28
Recording ........................................................... 29
Recording
One-Touch Recording ................................................. 30
Recording One Channel/VVatchingAnother ................................ 3 I
Setting Up theVCR Plus+ Programming System .......................... 32 - 33
Timer RecordingWith theVCR Plus+ Programming System ................. 34 - 35
Quick Programming ............................................... 36 - 39
Timer Recording Speed Setting .......................................... 40
Rerecording (Tape Duplication) ........................................... 41
Playing
Index Search ......................................................... 42
Multi-Channel Television Sound System ................. _............... 43 - 44
Hi-Fi Stereo Tape Playback .............................................. 45
Video Stabilizer ...................................................... 46
Incredible Picture .................................................... 47
Playback Options ..................................................... 48
Automatic Operation Features ........................................... 49
InformationYou May Need
Glossary ............................................................. S0
Specifications ........................................................ 5 I
Helpful Hints ......................... _. ........................... 52 - 53
Limited Warranty .................................................... 54
Index ............................... ................. .............. 55
Supplied Accessories .................................................. 56

BeforeUsingYourVCR5
Removing the Plastic Cover from the Front Panel
Athin, plasticcover mayprotect the front panelof yourVCR.
BeforeusingtheVCP_lift a corner ofthe plastic,then peel it off.
Putting Batteries in the Remote Control
I I
To open the battery compartment, push in the tab, then
pull up the lid.
2
Place two AA batteries inside the battery compartment
with their + and - ends aligned as indicated.
3
Close the battery compartment lid.
2
Using the Remote Control
• Do not put objectsbetweenthe remote controlandtheVCR.
•PresstheVCR button,then point the remote controlat theVCR's
remote sensor,before pressingotherVCR operationbuttons.
• PresstheTV button,then point the remote controlat theTV,
before pressingotherTV operation buttons.
• Pressthe CBIdDI3Sbutton,then point the remote controlat the
Cable Box/DBS,before pressingother CableBox/DBS operation
buttons.
Erase Protection
Video cassetteshaverecord tabsto ensurethat recordings are not
erasedaccidentany.
I
To prevent accidental erasure, break off the tab with a
screwdriver.
2
To record again, cover the hole with cellophane tape.
VCR Maintenance
•Remove anylightadhesivestick-onnotes from the videocassette
beforeputtingthe cassettein theVCR. Removablelabelscanjam
the VCR.
•Periodic maintenance is required to maintain your VCR'sperfor-
mance.¥ourVCR hasan automatichead cleaner,but the video
headseventually will require cleaningor replacement. Cleaningor
replacement of the video heads should be performed only by an
authorized service center.
Helpful Hints
Theremote controland itsbatteries
are supplied.
Do notmix alkalineand manganese
batteries.
Donotmix old and newbatteries.

6HookupsWithoutaCableBox
The basicVCWTV connection- antenna/cabletoVCR toTV - isshownbelow.Ifyou havea CableBox or a
Direct Broadcast System, please refer to pages 8 -9.After you hook up theVCR, please go to page l0 to
turn on theVCR.
I
Disconnect the antenna or cable from yourTV.
Antenna
IndoorlOutdoor
(300 ohm)
Cable
(75 ohm)
Jack
(on back of'IV)
2
Connect the antenna or cable to the ANT(enna) IN Jack on the back of the
VCR.
Antenna
Indoor/Outdoor
(300 ohm)
Cable
(7Sohm)

•HookupsWithoutaCableBox(cont'd)7
_ , ;•
Connect the RF coaxial cable (supplied) to the. RF OUT Jack on the back of
theVCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on
type or screw-on type of coaxial cable,whichever you prefer. Asnap-on type is supplied.)
Antenna
or Cable
RF coaxial cable
Antenna In Jack
(on back of TV)
example only
4
Plug in theTV and theVCR.
5
Set the CH3/CH4 switch on the back of the VCR to CH3 or CH4, whichever
channel is not used or least used in your area.To operate yourVCR with your TV, set
the TV to the same channel. For example, when playing a tape, if the CH3/CH4
switch is set to CH3, the TV should be on channel 3.
CH3 /CH4
Switch
CH3 CH4
6
You are ready to turn on theVCR. Please go to page 10 before turning on the
VCR.

8 HookupsWitha CableB0x/DimctBroadcastSystem
••••••••••••••••• •••••••••••• •••••••••••••••••••••Q••••••••••••••••••••••••••••••! • •••••• •••••• •••••••••••••• ••
There are two ways to connect your Cable Box/DBS to theVCR.With this connection:
• Youmayview anychannel.
• You must selectchannelsat the CableBox/DBS.Channelscannotbechangedat theVCR.
•You may not view a channelother than the one you are recording.
• You maynot set upchannelsat theVCR.
•You canonlyprograma timer recording for one channelat a time. SettheTV andtheVCR to the Cable
Box/DBSoutput channel(channel03 or 04),andset your CableBox/DBSto the channelyou want to
record.When you enter the channelyou want to record in a timer recording, selectchannel03 or 04
(the Cable Box/DBSoutput channel).(Thisisstep3 on page36.) Leavethe CableBox/DBSon for a timer
recording.
Cable Box/DBS VCR
Cable signal
RFcoaxialcable RFcoaxialcable
Connections
I
Connect a Cable signalto the IN jack on the Cable 13ox/DBS.
2
Usean EF coaxialcable(supplied)to connectthe OUT jackon
the Cable Box/DBSto theANT(enna) IN jack on theVCR.
3
Use a secondRFcoaxialcableto connectthe RFOUT jack on the
VCR to theTV'sANTENNA IN jack.
Recording/Viewing Any Channel
I
With theVCR on and inVCR position (theVCR light will appear
on the display panel), use the CH(annei) A/Y buttons to set the
VCR to the Cable Box/DBS output channel (channel 03 or 04).
2
Set the TV to the samechannelto whichyou set theVCR.
TV_s
ANTENNA
IN jack
3
Select the channelyou want to view/recordat the Cable Box/DBS.

HookupsWithaCableBox/DirectBroadcastSystem(cant'd)9
With this connection:
• You maywa:_chone channelwhile recording another.
• You may not record scrambledchannels.
I VCR
CableBoxJDBS
Cable signal _-I'V's
ANTENNA
RFcoaxialcable iN jack
RF coaxialcable
Connections
I
Connect a Cable signal to theVCR's ANT(enna) IN iack.
2
Use anRF coaxialcable(supplied)to connectthe RF OUT jackon
theVCR to the IN jackon the Cable Box/DES.
3
Use a secondRF coaxial cableto connect the OUT jackon the
Cable Box/DBS to the TV'sANTENNA IN jack.
Recording One Channel/_Natching Another
I ....
Putthe Cable Box/DBS on the samechannelastheVCR's
CH31CH4 switch.Then,with theVCR inVCR position(theVCR
light will appearon the displaypanel),usethe CH(annel) A/Y but-
tons to select the channelyou want to record at theVCR. Start
the recording.
2
PresstheVCRFIW button once to put theVCR inTV position.
(TheVCR lightwill disappear.)
3
Set theTV to the Cable BOx/DBSoutput channel(03 or 04).
4
Selectthe channelyou want to watch at the CableBOx/DBS.
Whenyouplay a tape,makesure
the CableBoxIDBSissetto the
samechanne/asthe CH3/CH4
switchontheVCR.SettheWto the
CableBox/DBSoutputchannel(0-!
or 04).

IOTurningonYourVCR
Before turning on yourVCR, make sure there are batteries in the
remote control and the VCR,TV, and Cable Box/DBS (if applicable)
are connected.
I
Press theVCR button, then press the POWER button.
Turn on theTV.
Wait for theVCR to set up
channels.
2
SIEIECT • •
•'_ ENGLISH
ESPA_Ot.
F'P,ANrCAIS
MAKE SELECTION OR
$H I_/OK TO CONTINUE
Turn on theTV. Set it to channel 3 or 4, whichever the
CH31CH4 switch on the back of theVCR is set to, The
menushownbelowwill appear.
"/
J
3
Press the PLAY • or STOP •button to select the on-
screen display language.
4
Press the FF I_/OK button. The menu shownbelowwill
appear.
I "/
CONNECT ANTENNA OR CABLE
TOVCR
THEN PUD4 I_IOK KEY
OR... -
R PI_Y ONLY - PtlN-I _rOP J
5
Press the FF ,IOK button to begin automatic channel
setup. AUTO CH.SET PROCEEDING PLEASEWAIT will appear
on-screen.The VCR will memorize all of the channels you receive,
so when you scan through channels using the CH(annel) •/V but-
tons, you'll only scan through channels that you receive.
6
When channels areset up,AUTO CH. SETCOMPLETED will
appear on-screen briefly.
3
I
Automayappear onthedisplay
panel untilthe clockisset.After
youconnectthe antenna/cablesig-
nal to theVCRandconnecttheVCR
toapowersource,the clockmay
set itselfautomatically.Thecurrent
time mayappearon theVCRdis.
playpanel.
If youdo notwant to setup chan-
nelsnow,pressthe STOP•button
at step5. TUNERNOT SETwill
appear on-screenbriefly.
Youmaynotset upchannelsat
step5 if youare usinga Cable
Box/DBS.

AutomaticChannelSetupII
Although yourVCR mayautomaticallymemorizethe channelsyou
receive when you turn it on for the first time, this functionlets
you set up channelsagain. Make eachentry within one minute of
the previousentry.
!
Press theVCR button, then press the MENU button.
2
Press the PLAY •or STOP •button to selectTUNER
SET UP, then press the FF I_/OK button.
-I. CABLE/ANTENNA. CABLE
AUTO CH, PROGRAMMING
ADD/nELETE CH.
END PUSH EXIT
3
Press the FF I_IOK button repeatedly so that ANT (if you
have an antenna) or CABLE (if you have a cable connec-
tion) appears beside CABLE/ANTENNA.
Wait for theVCR to set up
channels.
I
4
Press the STOP • button to select AUTO CH. PRO-
GRAMMING_ then press the FF Ib/OK button. AUTO CH.
SETPROCEEDING PI.EASEWAlT anda scalethat showsthe
progressof channelsetup will appearon-screan.TheVCRwill
memorizeall the channelsyou receive.
5
Wait for a few minutes while theVCR sets up channels.
When programmingiscomplete,AUTO CH. SETCOMPLETED
will appearon-screen.Then,the programmingof the lowestchan-
nel numberplacedin theVCR's memory will appearon-screen.
Now when you pressthe CH(annel) •/• buttons,youwill scan
onlythrough channelsyou receive.
If the channelyouselecthasno
bmadca_thescreenwillbesolid
blue.
Thetwo/ine Inputmodeswill
alwaysbe stored intheVCR'smem-
ory at channel00.1"oselectA/V IN
FRONTorAIV IN REAR,press0,0,
thenpresstheCH(annel)•IY but-
tonsso thatAIV IN FRONTor AIV
IN REARappearson-screenbriefly.
Toexit LineInputmode,usethe
CH(annel)•/• buttonstoselecta
channelotherthan 00.

12AutomaticChannelSetupIcont'd)
Adding/Deleting Channels
I
Press theVCR button, then press the MENU button.
VCR SET UP
TUNER SET UP
IN_L _l" UP
2
Press the PLAY • or STOP • button to selectTUNER
•SET UP, then press the FF I_IOK button.
1
AUTO CH. P'ROGRJLMMING
3
Press the PLAY •or STOP • button to select
ADDIDELETE CH., then press the FF I_/OK button.
SELECT • •
_25 eEl&frED
01 .... • DELETED
02 ADDED
03 A_ED
"TOADD/DELETE PUSH _IOK
N_ID PUN-I EXff J
4 "
Use the Number buttons, the CH (annel) •/V buttons, or
the PLAY •or STOP •buttons to select the channel you
want to add or delete.An arrow will appear beside the
selected channel.
I
6
3
5
Press the FF I_IOK button so that DELETED orADDED
appears beside the channel numhen
6
Press the EXITISTATUS button. Programmingof the channel
you addedor deletedwill appearon-screen.

Se ngtheClock13
•••*•••••••••••••••••• ••6••• ••••*••••••••••••••••••••••••••••••6••••••• •••••••••••• ••••••••••e• ••••••••••••••• •
There arefour waysto set theVCR's dock_Hanuatly,withTime
Zone Selection,with Hanual PBSChannelSelection,or with
Automatic PBSChannelSelection.CableBox/DBSusersmustset
the clockmanually.Beforeyou set the clock,makesure:
•TheVCR power is on. •
•TheVCR lightappearson the displaypanel,if it does not,press I
the VCPd'I"V button once.
•Channels are set up.
•Youmake eachentry within one minute of the previous entry,
To set the clock manually,follow the stepson this page:Touse
Time 7one SelecUon_goto page 15.TouseManualPBSChannel
selection,go to page16.To use Automatic PBS Channel Selection,
go to page 17.
Manual Clock Setting
I
Press theVCR button, then press the MENU button.
-_ VCR SET UP
TUNER SET UP
INITIAL SET UP
END F_JSH EXiT j,
2
Press the PLAY • or STOP •button to select INITIAL
SET UP, then press the FF I_IOK button.
VCI_ PLUS+ C_
_T 0"_
ENO PUSI'I EXIT _/
3
Press the PLAY •or STOP •button to select CLOCK,
then press the FF I_IOK button.
TIME ..... AM l
DATE 01_)1/9_
AUTO CLOCK ON
PBSCH, AUTO
_S.1_ AUTO
Tli'*1E ZONE AU'FO
TO SET PUSH k_ fTHEN I_/OK
_.O END PUSH EXIT J
Instructions continue on page 14.
He/p_ Hints
ToprogramtheVCRsoitsclackwill
automatk:al/ymoveforwardone
hourinAprilandrumbackone
hourin October,seepage18.
Tomakecorrectious,fo//owstepsI
3,then pressthe FFI,'IOK button
unti/theitemyouwanttocorrect
flashing.Thenpressthe PLAY• or
STOP•buttonto enterthecorrect
informatJon.PresstheEXIT/STATUS
huron.

14SettingtheClock(cont'd)
TtHE l0:4SAM
DATE 01/01/96
AUTOCLOCK OFF
D_T. ON
TO SETPUSHAV THEN IPiOK
ENDPUSHEXIT
Press the PLAY & or STOP •button repeatedly to set
theTIME. Everytime you pressthe PLAY • or STOP•button,
the time changesin one minute increments,if you pressandhold
the PLAY• or STOP • button,the time changesin 30 minute
increments.
When the time is correct, press the FF )'/OK button.
5
Press the PLAY •or STOP •button repeatedly to set
the DATE (month and day). Everytime you pressthe PLAY•
or STOP•button,the daychangesin one dayincrements.If you
pressandhold the PLAY• or STOP •button,the daychangesin
15 dayincrements.
When the month and day are correct, press the FF I_/OK
button.
DATE 07131,'98
AUTO CI.OCK OFF
D.$.T, ON
'TO SET PIJSH kV THEN Ib.IOK
_hlD PUSH EXIT
6
Press the PLAY •or STOP •button repeatedly to set
theYEAR.When the year is correct, press the FF I_IOK
button. The dayof the week will appearautomatically.
OAT_E 07/31/V8
_ _I.OCK OFF
D.S,_ ON
TO S_TPUSH&T THEN _IOK
E/,IDpJSl_ _¢.rr
7
Press the FF I_IOK button once again to skip the "AUTO
CLOCK" selection and go to "D.S.T:' (Daylight Saving
Time) selection. Press the PLAY •or STOP •button to
set D,S.T. to ON, OFF or AUTO. IfAUTO CLOCK is setto
OFF,you mayonly set D.S.T.to ON or OFF.For more information,
pleasesee page18.
8
Press the EXITISTATUS button.

SettingtheClock(c0nt'd)15
Time Zone Selection
I
Press theVCR button, then press the MENU button.
2
Press the PLAY • or STOP •button to select INITIAL
SET UP, then press the FF I_/OK button.
SELECT • • CHOOSE IbiOK
"CL°CK
tANGUAGE ENGUSH
VCR PLUS÷ CH.
END PUSH EXIT
3
Press the PLAY •or STOP •button to select CLOCK,
then press the FF I_IOK button.
(IfAUTO CLOCK isset to OFF,TIME ZONE will not be available
in the menu. If this happens,pressthe FFI_/OK button to select
AUTO CLOCK, then pressthe PLAY•or STOP•button to set
AUTO CLOCK to ON.)
f "l
TIME --:--AM
I_ATE 01iOt/911
AUTO CLOCK ON
PBSCH, AUTO
O.S,_ AUTO
TIME ZONE AUTO
TO SET PUSH AV THEN I_/OK
END _EXiT J
4
Press the FF I_IOK bu_0n repeatedly to selectTIME
ZONE.
I
5
5
Press the PLAY • or STOP •button repeatedly to select
yourTime Zone, then press the FF I_IOK button.
6
Press the EXIT/STATUS button.
7
An on-screen message will ask you to turn off theVCR,
and - - :- -AM will appear on the display panel. Press the
POWER button to turn off theVCR.
Auto will flashin the displaypaneluntilthe clockisse_Leavethe
VCR turned off untilthe time appearson the displaypanel.
If- - :-_r appearson the displaypanelafter you turn offtheVCR,
theVCR couldnot findthe time. Setthe clockfollowingthe steps
on pages13- 14.
Whenthe powerplug isconnected
to anACoutlet,thecorrecttimewill
appear onthedisplaypanelofthe
VCR(whenthe powerisoff).
Ifyou livenearthe boundaryof an
adjacenttime zone,your PESchan-
nelmay camefrom adifferenttime
zone.Selectthetime zone0fyour
PBSchannelat step5.
Pressthe EXIT/STATUSbutton
repeated/ytomakethe time appear
onthe displaypanelwhentheVCR
powerison.

16SettingtheClock(cont'd)
Manual PBS Channel Selection
I
Press theVCR button, then press the MENU button.
2
Press the PLAY • or STOP •button to select INITIAL
SET UP, then press the FF I_/OK button.
3
Press the PLAY •or STOP • button to select CLOCK,
then press the FF I_IOK button. (IfAUTO CLOCK issetto
OFF,PBSCH. will not be availablein the menu.If this happens,
pressthe FFI_/OK bu_conto selectAUTO CLOCI_ then press
the PLAY•or STOP •button to setAUTO CLOCK to ON.)
TIME --:--AM
DATE 01_)[/_1
_UTO CLOCKON
PI_ CH, AUTO
O.S._ AUTO
TIME ZONE AUTO
TO SET FUeJ4 At THEN I_IOK
REND PUe'_HEXIT
4
Press the FF I_/OK button to select PBS CH.
4
5
Press the PLAY • or STOP •button repeatedly to select
the station number of your PBS channel, then press the
FF I_/OK button.
4.
Press the EXIT/STATUS button.
7
An on-screen message will ask you to turn off theVCR,
and - - :- -AM will appear on the display panel.
Press the POWER button to turn off theVCR.
Auto will flashinthe displaypaneluntilthe clockisset.Leavethe
VCP,power offuntil the clockisset
If - - :- - appearson the displaypanelafteryou turn offtheVCR,
theVCR couldnot findthe time. RepeatstepsI -6 above,enter-
inga differentPBSchannelat step5.Or, set the clockfollowing
the stepson page 17. I
I
•Thetimewillbe updatedat thetoo
ofeachhour(exceptat II p.m., I
midnight,I a.m.,and 2a.m.). I

SettingtheClock(coned)17
Automatic PBS Channel Selection
I
Press theVCR button, then press the MENU button.
2
Press the PLAY • or STOP •button to select INITIAL
SET UP, then press the FF I_IOK button.
3
Press the PLAY •or STOP •button to select CLOCK, _"
then press the FF I_IOK button. (IfAUTO CLOCK issetto
OFF,PI_SCH. will not be availablein the menu.If this happens,
pressthe FFI_/OK button to selectAUTO CLOCK, then press
the PLAY•or STOP•button to setAUTO CLOCK to ON.)
_" TIME ..... AM 1
IDATE 01,01/98
AUTOCLOCKON
CH. AUTO
"r]H E ZONE AUTO
TO S_" PUSH &Y"II-IEN b-IOK
_TOEND PUSH IE_T
4
Press the FF klOK button repeatedly to select PBS CH.
5
Press the PLAY •or STOP •button repeatedly sothat
AUTO flashes beside PBS CH.Then press the FF I_IOK
button.
I
.
Press the EXITISTATUS button.
7
An on-screen message will ask you to turn off theVCR,
and - - :- -AM will appear on the display panel.
Press the POWER button to turn off theVCR.
Auto willflashin the displaypaneluntilthe clockisset Leavethe
VCR power off untilthe clockisset.If - - :- - appearson the
displaypanelafter you turn offtheVCR, theVCR couldnot find
the time.You may need to tell theVCR the PBSchannelfrom
whichto take the time. Followthe steps on page 16. Thetimewillbeupdatedat thetop
ofeachhour(exceptat I I p.m.,
midnight,I a.m.,and2a.m.).
Todisplayd_etime0n-screen,_ress
•e EXIT/STATUSbutton.(ON
SCREENMODE cannatbesetto
OFF..)Detailsareonpage25.

18Daylight-SavingTime
••p••••••••••••••• •••••• ••••••• •••••••••••••••••••••••••••••••••••••••••••••••••••••• ••••• •••••• ••••••••••• ••••
Followthe stepsbelowto programtheVCP, so itsclockwill auto-
madcalty moveforward one hour inApril andturn backone hour
in October.
I
Press theVCR button, then press the MENU button.
2
Press the PLAY •or STOP •button to select INITIAL
SET UP, then press the FF IHOK button.
SELECT•• CHOOSE_OK
I CL_;K J
LANGUAGE _IGUSH
VCK _US÷ CNk
END PUSH_xrr
3
Press the PLAY • or STOP •button to select CLOCK,
then press the FF IHOK button. (IfAUTO CLOCK issetto
OFE PBSCH. andTIME ZONE will not appearin the menu.)
DATE 0_1/98
AUTO CLOCK ON
_CH. AUTO
0.5.3_ AUTO
11HE ZONE ALrfO
TO SET PUSH •" THEN I_IOK
END PUSH EXIT
4
Press the FF IHOK button repeatedly to select D•S.T.
....
Press the PLAY •or STOP •button so that ON, OFF, or
AUTO appears beside D.S.T.
SelectON to makethe clockadjustitself accordingto theVCP,'s
calendar.SelectOFF to turn offthe feature.SelectAUTO to make
the clock adjustitselfaccordingto the signalit receivesfrom the
PBSchannel.IfAUTO CLOCK isset to OFF,you mayonlyset
D.S.T.to ON or OFE
6
Press the EXIT/STATUS button.
I
7
An on-screen message will ask you to turn off theVCR if
you set D.S.T. to ON orAUTO. Press the POWER button
to turn offtheVCR. Auto will flash in the display panel until the
clock is set. Leave theVCP, power off until the clock is set. If
:, appears on the display panel after you turn off the VCP,, the
VCE could not find the time.You may need to tell theVCR the PBS
channel from which to take the Ume. Follow the steps on page 16.

LanguageSelection19
Followthe stepsbelowto changethe languageof the on-screen
displays.
I
Press theVCR button, then press the MENU button.
=* VCP. _r UP
TUNER SET UP
INITIAL SET UP
2
Press the PLAY A or STOP •button to select INITIAL
SET UP, then press the FF I_IOK button.
_ELECT.e.CLOCK••CHOOSEP/OK 1
LANGUAGE ENGI,JSH
VC_. PLUS+ CH.
_,_ END PUSH EXIT
3
Press the STOP •button to select LANGUAGE.
4
Press the FF I_IOK button repeatedly so that the language
you want to select appears on-screen.
5
Press the EXITISTATUS button.
I
5
If youaccidentallyselectSpanishor
Frenchon-screendisplaysandneed
Englishon-screendisplays,follow
thesesteps.I) PresstheVCRbu_on
thenpresstheMENU button.
2) PressthePLAYA or STOP•
buttontoselectSISTENIAINICIAL
orPROGRAMM.INITIALE,then
pressthe FFI_/OK button.3) Press
the PLAY• or STOP• buttonto
selectLENGUAJEorLANGUF_4)
Pressthe FFI_/OK buttonrepeated-
/ysothat the Eng/ishmenu
appears.5) Pressthe EXITISTATUS
button.

20 RemoteContro!Buttons
•*•••••••••• •••ee •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••• •••••••••••••••••••••••••
TV Button
Pressthis button beforepressing Pressthis button beforepressing
other'lV operation buttons. VCR operation buttons.
CBL/DBS Button t
Pressthis button befoi'epressing \
CableBox/DBSoperationbuttons.
PLAY • Button
InVCR mode,pressto playa tape.
Also,pressto release Slow,Still,or
Searchmode and to return to nor-
malplayback.Detailsareonpage 48.
InTV mode,pressto moveup or
forward one row or selectionin the
TV menu.
REW(ind) • Button
When tape playback is stopped,
press to rewind the tape at high
speed. During tape playback, press
to rewind the tape while the picture
stayson-screen. Details are on page
48. Press to adjust (decrease) the
picture controls or to change a
menu setting at the'IV menu.
REC(ord)IOTR Button
Pressonceto start a recording.
Detailsareon page29. Or, press
repeatedly to start a One-Touch
Recording.Detailsareonpage30.
VCR/TV Button
Pressto selectthe signalthat your
TV receives.
•VCR Position
Useto watch a tape,to watch a
programwhile recordingit, or to
watch a'tV broadcastusingthe
CH(annei) •/V or Number but-
tons to changechannelsat theVCR.
TheVCR lightwill appearon the
displaypanelwhen theVCR isin
VCR position.
•"IV PosiUon
Useto watch"IV (selectingchannels
at the'IV) or to watch one program
while recording another.Detailsare
onpage 31.TheVCR lightwill not
appearwhen theVCR isinTV posi-
tion.
0
After pressingthe CBL/DBS,VCR,
or'IV button,pressto turn on or
offthe Cable Box/DBS,VCK,or'l"_.
EJECT Button
ject the tape.
FF (Fast Forward) II_IOK
•Button
When tape playbackisstopped,
pressto advancethetape at high
speed.Duringtape playback,press
to advancethe tape whilethe pic-
ture stayson-screen.Detailsareon
page 48.Or, pressto adjust
(increase)the picturecontrolsor to
changea menusettingat theTV
menu,
Button
Pressto stop the tape.Or pressto
movedown or backward one row
or selection in the'rV menu.
Buttons
After pressingthe CBIJDBS,TV,or
VCR button,pressto selectachan-
nel at the Cable Box/DBS,T_, or "
VCR.To selectchannelsI-9, press0,
then the channelyou want For
example,to selectchannel7,press
0,7.
LEAR Button
Pressto reset the real-timecounter
tO zero.