Philips BDP3500/93 User manual

www.philips.com/support
User manual
Always there to help you
Register your product and get support at
Question?
Contact
Philips
BDP3500/93
WOOX Innovations Ltd.

4
Risk of short circuit or fire!
• Before you connect the product to
the power outlet, ensure that the
power voltage matches the value
printed on the back or bottom of
the product. Never connect the
product to the power outlet if the
voltage is different.
Risk of injury or damage to the
product!
• Visible and invisible laser radiation
when open. Avoid exposure to
beam.
• Do not touch the disc optical lens
inside the disc compartment.
• Never place the product or any
objects on power cords or on other
electrical equipment.
• If the product is transported
in temperatures below 5°C,
unpack the product and wait until
its temperature matches room
temperature before connecting it to
the power outlet.
Risk of overheating!
• Never install this product in a confined
space. Always leave a space of at least
four inches around the product for
ventilation. Make sure that curtains
or other objects never cover the
ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new
or carbon and alkaline, etc.).
• Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
• Batteries contain chemical
substances, they should be disposed
of properly.
Risk of swallowing batteries!
• The product/remote control may
contain a coin type battery, which
can be swallowed.
English
Safety and
important notice
Read and understand all instructions
before you use this Blu-ray disc/ DVD
player. If damage is caused by failure to
follow the instructions, the warranty
does not apply.
Safety
Risk of electric shock or fire!
• Never expose the product and
accessories to rain or water. Never
place liquid containers, such as vases,
near the product. If liquids are spilt
on or into the product, disconnect it
from the power outlet immediately.
Contact Philips Consumer Care to
have the product checked before use.
• Never place the product and
accessories near naked flames or
other heat sources, including direct
sunlight.
• Never insert objects into the
ventilation slots or other openings
on the product.
• Where the mains plug or an
appliance coupler is used as the
disconnect device, the disconnect
device shall remain readily operable.
• Batteries (battery pack or batteries
installed) shall not be exposed to
excessive heat such as sunshine, fire
or the like.
• Disconnect the product from
the power outlet before lightning
storms.
• When you disconnect the power
cord, always pull the plug, never the
cable.
BDP3500_93_UM_V3.0.indb 4 10/9/2014 3:47:59 PM

5
• Keep the battery out of reach of
children at all times!
Class II equipment symbol:
This symbol indicates that this product
has a double insulation system.
3D health warning
• If you or your family has a history of
epilepsy or photosensitive seizures,
consult a medical professional
before exposing yourself to flashing
light sources, rapid image sequences
or 3D viewing.
• To avoid discomfort such as
dizziness, headache or disorientation,
we recommend not watching 3D
for extended periods of time. If
you experience any discomfort,
stop watching 3D and do not
immediately engage in any
potentially hazardous activity (for
example driving a car) until your
symptoms have disappeared. If
symptoms persist, do not resume
watching 3D without consulting a
medical professional first.
• Parents should monitor their
children during 3D viewing and
ensure they do not experience any
discomfort as mentioned above.
Watching 3D is not recommended
for children under 6 years of age
as their visual system is not fully
developed yet.
CLASS 1
LASER PRODUCT
Care for your product
• Do not insert any objects other than
discs into the disc compartment.
• Do not insert warped or cracked
discs into the disc compartment.
• Remove discs from the disc
compartment if you are not using
the product for an extended period
of time.
• Only use microfiber cloth to clean
the product.
Care of the environment
Your product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused.
Never dispose of your product with
other household waste. Please inform
yourself about the local rules on the
separate collection of electrical and
electronic products and batteries.The
correct disposal of these products
helps prevent potentially negative
consequences on the environment and
human health.
Your product contains batteries, which
cannot be disposed of with normal
household waste.
Please inform yourself about the local
rules on separate collection of batteries.
The correct disposal of batteries
helps prevent potentially negative
consequences on the environment and
human health.
Please visit www.recycle.philips.com for
additional information on a recycling
center in your area.
BDP3500_93_UM_V3.0.indb 5 10/9/2014 3:47:59 PM

6
Open source software
Philips Electronics Singapore hereby
offers to deliver, upon request, a copy
of the complete corresponding source
code for the copyrighted open source
software packages used in this product
for which such delivery is requested by
the respective licenses.This offer is valid
up to three years after product purchase
to anyone in receipt of this information.
To obtain source code, please send
your request in English with product
type to [email protected]. If
you prefer not to use email or if you
do not receive confirmation receipt
within 2 weeks after mailing to this
email address, please write in English to
“Open Source Team, Philips Intellectual
Property & Standards, P.O. Box 220,
5600 AE Eindhoven,The Netherlands”.
If you do not receive timely confirmation
of your letter, please email to the email
address above.The texts of the licenses
and acknowledgements for open source
software used in this product are
included on a separate leaflet.
Copyright
This item incorporates copy protection
technology that is protected by U.S.
patents and other intellectual property
rights of Rovi Corporation. Reverse
engineering and disassembly are
prohibited.
This product incorporates proprietary
technology under license from Verance
Corporation and is protected by U.S.
Patent 7,369,677 and other U.S. and
worldwide patents issued and pending
as well as copyright and trade secret
protection for certain aspects of such
technology. Cinavia is a trademark
of Verance Corporation. Copyright
2004-2013 Verance Corporation. All
rights reserved by Verance. Reverse
engineering or disassembly is prohibited.
Cinavia notice
This product uses Cinavia technology
to limit the use of unauthorized copies
of some commercially-produced film
and videos and their soundtracks. When
a prohibited use of an unauthorized
copy is detected, a message will be
displayed and playback or copying will be
interrupted.
More information about Cinavia
technology is provided at the Cinavia
Online Consumer Information Center
at http://www.cinavia.com.To request
additional information about Cinavia
by mail, send a postcard with your
mailing address to: Cinavia Consumer
Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
BDP3500_93_UM_V3.0.indb 6 10/9/2014 3:48:00 PM

7
User Manual
HDMI
COAXIAL
C
OA
X
I
AL
A
A
1
BDP3500_93_UM_V3.0.indb 7 10/9/2014 3:48:00 PM

8
COAXIAL
C
OA
XIA
AL
A
A
COAXIAL
2
HDMI OUT
HDMI OUT
BDP3500_93_UM_V3.0.indb 8 10/9/2014 3:48:00 PM

9
4
3
5
SOURCE
1
2
TV
BDP3500_93_UM_V3.0.indb 9 10/9/2014 3:48:01 PM

10
6
USB
DVD/VCD/CD
DivX Plus HD/MKV
BD
BD 3D
MP3 / JPEG
2
1
3
4
1
2
3
BDP3500_93_UM_V3.0.indb 10 10/9/2014 3:48:01 PM

1
English
EN
Contents
1 Use your Blu-ray disc/ DVD player 2
Basic play control 2
Video, audio and picture options 3
DivX videos 4
Play a musical slideshow 5
BonusView on Blu-ray 5
BD-Live on Blu-ray 5
Play a Blu-ray 3D video 6
Set up a network 6
Voole 7
Stream multimedia via Miracast 7
Use Philips EasyLink 8
2 Change settings 8
Picture 8
Sound 9
Network (installation, status...) 9
Preference (languages, parental control...) 9
Advanced options (clear memory...) 10
3 Update software 11
Update software via the Internet 11
Update software via USB 11
4 Specications 12
5 Troubleshooting 15
BDP3500_93_UM_V3.0.indb 1 10/9/2014 3:48:09 PM

2EN
1 Use your Blu-
ray disc/ DVD
player
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfrom
the support that Philips offers (e.g. product
software upgrade), register your product at
www.philips.com/welcome.
Basic play control
During play, press the following buttons to
control.
Button Action
Turn on the player, or switch to
standby.
Access the home menu.
BDP3500_93_UM_V3.0.indb 2 10/9/2014 3:48:10 PM

3
English
EN
Button Action
DISC MENU Access or exit the disc menu
or Pop-up menu.
TOP MENU Access the main menu of a
video disc.
Navigate the menus.
Press to rotate a picture
clockwise or counter-clockwise
during slideshow.
OK Conrmaselectionorentry.
Return to a previous display
menu.
Access more options during
play.
Color
buttons
Select tasks or options for Blu-
ray discs.
Open or close the disc
compartment.
Start or resume play.
Pause play.
Press repeatedly to slow
forward frame by frame.
Stop play.
/ Skip to the previous or next
track,chapterorle.
/ Fast backward or forward.
Press repeatedly to change the
search speed.
Press once, and then press
to slow forward.
AUDIO Select an audio language or
channel.
SUBTITLE Select a subtitle language.
Alphanumeric
buttons
Select an item to play.
Enter values.
Enter letters via SMS style
entry.
Video, audio and picture
options
More options are available for video or picture
play from a disc or USB storage device.
Video options
Access more options during video play.
• [Audio language]: Select an audio
language.
• [Subtitle language]: Select a subtitle
language.
• [Subtitle shift]: Change the subtitle
position on the screen. Press to
change the subtitle position.
• [Info]: Display play information.
• [Character set]: Select a character set
that supports the DivX video subtitle
(only for DivX videos).
• [Time search]:Skiptoaspecictime
via the numeric buttons on the remote
control.
• [2nd audio language]: Select the second
audio language (only for Blu-ray discs that
support BonusView).
• [2nd subtitle language]: Select the second
subtitle language (only for Blu-ray discs
that support BonusView).
• [Titles]: Select a title.
• [Chapters]: Select a chapter.
• [Angle list]: Select a camera angle.
• [Menus]: Display a disc menu.
• [PIP selection]: Display a picture-in-
picture window (only for Blu-ray discs that
support BonusView).
2
3
1
BDP3500_93_UM_V3.0.indb 3 10/9/2014 3:48:14 PM

4EN
• [Zoom]: Zoom into a video picture. Press
to select a zoom factor.
• [Repeat]: Repeat a chapter or title.
• [Repeat A-B]: Mark two points within a
chapter for repeat play, or turn off repeat
mode.
• [Picture settings]:Selectapredened
color setting.
Note
•Available video options depend on the
video source.
Picture options
Access more options during slideshow.
• [Rotate +90]: Rotate a picture 90 degrees
clockwise.
• [Rotate -90]: Rotate a picture 90 degrees
counter-clockwise.
• [Zoom]: Zoom into a picture. Press
to select a zoom factor.
• [Info]: Display picture information.
• [Duration per slide]: Set a display interval
for a slideshow.
• [Slide animation]: Select a transition effect
for a slideshow.
• [Picture settings]:Selectapredened
color setting.
• [Repeat]: Repeat a selected folder.
2
3
1
Audio options
Press repeatedly to cycle through the
following options.
• Repeat the current track.
• Repeat all the tracks on the disc or folder.
• Play audio tracks in a random loop.
• Turn off a repeat mode.
DivX videos
You can play DivX videos from a disc or a USB
storage device.
VOD code for DivX
• Before you purchase DivX videos and
play them on this player, register this
player on www.divx.com using the DivX
VOD code.
• Display the DivX VOD code: press , and
select [Setup] > [Advanced] > [DivX®
VOD Code].
DivX subtitles
• Press SUBTITLE to select a language.
• If the subtitle is not displayed correctly,
change the character set that supports
the DivX subtitle. Select a character set:
press , and select [Character set].
Character
set
Languages
[Standard] English, Albanian, Danish,
Dutch, Finnish, French, Gaelic,
German, Italian, Kurdish (Latin),
Norwegian, Portuguese, Spanish,
Swedish, and Turkish
BDP3500_93_UM_V3.0.indb 4 10/9/2014 3:48:14 PM

5
English
EN
Character
set
Languages
[Central
Europe]
Albanian, Croat, Czech, Dutch,
English, German, Hungarian, Irish,
Polish, Romanian, Slovak, Slovene,
and Serbian
[Cyrillic] Bulgarian, Belorussian, English,
Macedonian, Moldavian, Russian,
Serbian, and Ukrainian
[Greek] Greek
[Baltic] Estonian, Latvian and Lithuanian
[Chinese] SimpliedChinese
[Chinese-
Traditional]
Traditional Chinese
[Korean] English and Korean
Note
•To use the subtitles, make sure that the
subtitlelehasthesamenameasthe
DivXvideolename.Forexample,ifthe
DivXvideoleisnamed“movie.avi",save
thesubtitleleas“movie.srt”,or“movie.
sub”.
•Thisplayercanplaysubtitlelesinthe
following formats: .srt, .sub, .txt, .ssa, and
.smi.
Play a musical slideshow
Play music and pictures simultaneously to
create a musical slideshow.
1 From a disc or connected USB storage
device,playamusicle.
2 Press , and go to the picture folder.
3 Select a picture from the same disc or
USB, and press OK to start slideshow.
4 Press to stop slideshow.
5 Press again to stop music play.
BonusView on Blu-ray
View special content (such as commentaries)
in a small screen window.
This feature is only applicable to Blu-ray discs
compatible with BonusView (also known as
picture in picture).
1 During play, press .
» The options menu is displayed.
2 Select [PIP selection] > [PIP], and press
OK.
» PIP options [1]/[2] depend on the
video contents.
» The secondary video window is
displayed.
3 Select [2nd audio language] or [2nd
subtitle language], and press OK.
BD-Live on Blu-ray
Access exclusive online services, such as movie
trailers, games, ringtones and other bonus
contents.
This feature is only applicable to Blu-ray discs
that are BD-Live enabled.
1 Prepare the Internet connection and set
upanetwork(see"Setupanetwork").
2 Connect a USB storage device to the
(USB) connector on this player.
• A USB storage device is used to store
the downloaded BD-Live content.
• To delete the BD-Live previously
downloaded on the USB storage
device for memory release, press
and select [Setup] > [Advanced] >
[Clear memory].
3 Play a disc that is BD-Live enabled.
4 On the disc menu, select the BD-Live
icon, and press OK.
» BD-Live starts to load.The loading
time depends on the disc and the
Internet connection.
BDP3500_93_UM_V3.0.indb 5 10/9/2014 3:48:15 PM

6EN
5 On the BD-Live interface, select an item
to access.
Note
•BD-Live services vary from discs and
countries.
•When you use BD-Live, data on the
disc and this player are accessed by the
content provider
•Use a USB storage device with at least
1GB of free space to store the download.
Play a Blu-ray 3D video
What you need
• A 3D compliant TV
• This player is connected to the TV
through HDMI
• 3D glasses compatible with the TV
• 3D Blu-ray disc
1 Make sure that 3D output is turned on:
press , and select [Setup] > [Video]
>[Watch 3D video] > [Auto].
2 Play a Blu-ray 3D video.
3 Put on the 3D glasses for 3D effects.
• To turn off 3D output, press , and
select [Setup] > [Video] > [Watch
3D video] > [Off].
Set up a network
Connect this player to a computer network
and the Internet to access the services:
• Update software: update the software of
this player via the Internet.
• BD-Live: access online bonus features
(applicable to Blu-ray discs that are BD-
Live enabled).
• Online service: access Voole.
1 Connect this player to a computer
network and the Internet, through wired
(Ethernet) or wireless connection.
• For wired connection, connect a
network cable (not supplied) to the
LAN port on the back panel of this
player.
• This player has a built-in Wi-Fi for a
wireless connection.
2 Perform the network installation.
1) Press .
2) Select [Setup], and press OK.
3) Select [Network] > [Network
installation], and press OK.
4) Follow the instructions on the TV screen
to complete the installation.
BDP3500_93_UM_V3.0.indb 6 10/9/2014 3:48:17 PM

7
English
EN
Caution
•Before you connect to a network,
familiarize yourself with the network
router and networking principles.
If necessary, read documentation
accompanying network components.
Philips is not responsible for lost, damaged,
or corrupt data.
Voole
With this player connected to the Internet, you
can stream movies andTV episodes to yourTV.
1 Connect this player to the Internet (see
“Setupanetwork”).
2 Press .
3 Select [Voole], and press OK.
» The default Voole page is displayed on
the TV screen.
4 Use the remote control to navigate and
select options.
• To exit Voole, press .
Button Action
Select an item on the video playlist.
OK Conrmanentryorselection.
Start or resume play.
Pause play.
Stop play.
/ Skip backward or forward during
video play.
Stream multimedia via
Miracast
Through this player, you can stream audio and
videofromaMiracastcertieddevicetoyour
TV, and the screen of the Miracast device is
viewed on your TV.
What you need
• Smartphones or tablets with Android 4.2/
Windows 8.1 or above, and check those
devices on whether Miracast feature is
available (the name of Miracast feature
may vary on different devices).
• Enable Miracast on your smartphone or
tablet (refer to a related user manual for
details).
• Make sure that Miracast is enabled on
this player (press , and select [Setup] >
[Network] > [Miracast break-in] > [On]).
1 Press to display the home menu screen
of this player.
2 On the Miracast source device, initiate the
search for this player and select this player
when it is found (refer to the source
device’s user manual for details).
• Ifthisisthersttimethese2devices
are paired, an acknowledgement
message is displayed on your TV.
Accept it to continue the pairing.
• To cancel the pairing, press on the
remote control.
3 Wait until the media content from the
source device is displayed on your TV,
then choose the media to start play.
» Audio or video is streamed to your
TV through this player.
Note
•This player can store up to 10 Miracast
devices for pair-up, and can only connect a
singleMiracastcertieddeviceatatime.
•During Miracast connection,Wi-Fi
connection on this player is temporarily
suspended.
•To avoid interference from Bluetooth
transmission, turn off Bluetooth on your
Miracast device.
•During Miracast streaming, video
stuttering or audio dropouts may occur,
depending on your environment (video
streaming is up to 720p).
BDP3500_93_UM_V3.0.indb 7 10/9/2014 3:48:19 PM

8EN
Use Philips EasyLink
This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol.You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1 Connect the HDMI CEC compliant
devices through HDMI, and turn on the
HDMI CEC operations on the TV and
other connected devices (see the user
manual of the TV or other devices for
details).
2 Press .
3 Select [Setup]> [EasyLink].
4 Select [On] under the options: [EasyLink],
[One Touch Play] and [One Touch
Standby].
» EasyLink function is turned on.
One Touch Play
When a video disc is in the disc
compartment, press to wake up the TV
from standby, and then play a disc.
One Touch Standby
When a connected device (for example TV)
is put to standby with its own remote control,
this player is put to standby automatically.
2 Change settings
This section helps you change the settings of
this player.
Note
•You cannot change a menu option that is
grayed out.
•To return to the previous menu, press .
To exit the menu, press .
Picture
1 Press .
2 Select [Setup] > [Video] to access the
video setup options.
• [TV display]: Select a picture display
formattottheTVscreen.
• [HDMI video]: Select an HDMI video
resolution.
• [HDMI Deep Color]: Display colors with
more shades and hues when the video
content is recorded in Deep Color and
the TV supports this feature.
• [Picture settings]:Selectapredened
color setting.
Watch 3D video
1
3
2
3
BDP3500_93_UM_V3.0.indb 8 10/9/2014 3:48:20 PM

9
English
EN
• [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D TV
through HDMI.
Note
•If you change a setting, make sure that the
TV supports the new setting.
Sound
1 Press .
2 Select [Setup] > [Audio] to access the
audio setup options.
• [Night mode]: Select quiet or full dynamic
sound. Night mode decreases the volume
of loud sound and increases the volume
of soft sound (such as speech).
• [HDMI audio]: Set an HDMI audio format
when this player is connected through
HDMI.
• [Digital audio]: Select an audio format
for the sound output when this player is
connected through a digital connector
(coaxial).
• [PCM downsampling]: Set the sampling
rate for PCM audio output when this
player is connected through a digital
connector (coaxial).
Note
•For settings related to HDMI, the TV must
be connected through HDMI.
•Night mode is only available for
encoded DVD and Blu-ray discs.
Network (installation,
status...)
1 Press .
2 Select [Setup] > [Network] to access the
network setup options.
• [Network installation]: Start a wired or
wireless installation to make the network
work.
• [View network settings]: Display the
current network status.
• [View wireless settings]: Display the
current Wi-Fi status.
• [Name your Product:]: Re-name this
playerforidenticationinahome
network.
• [Miracast break-in]:Turn on or off
Miracast.
• [Miracast browser]: Scan for Miracast
devices.
• [Miracast role]: Force this player to be
Group Owner or automatically choose a
device to be Group Owner.
• [Auto]:The role of Group owner is
automatically determined between
the source device and this player
when connection is established.
• [Group owner]: Force this player
to be Group Owner and allow it
to select the channel to use for
establishing the link with the source
device.
Preference (languages,
parental control...)
1 Press .
2 Select [Setup] > [Preference] to access
the preference setup options.
• [Menu language]: Select an onscreen
display menu language.
• [Audio]: Select an audio language for
video.
BDP3500_93_UM_V3.0.indb 9 10/9/2014 3:48:21 PM

10 EN
• [Subtitle]: Select a subtitle language for
video.
• [Disc menu]: Select a menu language for
a video disc.
• [Parental control]: Restrict access to
discs that are encoded with ratings. Input
"0000"toaccesstherestrictionoptions.
To play all discs irrespective of the rating,
selectlevel"8".
• [Screen saver]: Enable or disable screen
saver mode. If enabled, the screen enters
idle mode after 10 minutes of inactivity
(for example, in pause or stop mode).
• [Auto subtitle shift]: Enable or disable
subtitle shift. If enabled, the subtitle
positionischangedautomaticallytotthe
TV screen (this feature works with some
Philips TVs only).
• [Change password]: Set or change a
password to play a restricted disc. Input
"0000"ifyoudonothaveapasswordorif
you have forgotten your password.
• [Auto standby]: Enable or disable auto
standby. If enabled, the player switches to
standby after 30 minutes of inactivity (for
example, in pause or stop mode).
• [VCD PBC]: Display or skip the content
menu forVCD and SVCD.
• [Auto play disc]: Enable or disable the
automatic disc playback after power on.
• [Auto play after video]: Enable or disable
sequential playback of videos from USB.
Note
•If your preferred language is not available
for disc language, audio or subtitle, you
can select [Other] from the menu options
and input 4-digit language code which can
be found at the back of this user manual.
•If you select a language which is not
available on a disc, this player uses the
default language of the disc.
Advanced options (clear
memory...)
1 Press .
2 Select [Setup] > [Advanced] to access
the advanced setup options.
• [BD-Live security]: Restrict or allow
access to BD-Live (only for non-
commercial, user-created BD-Live discs).
• [Downmix mode]: Control 2-channel
stereo audio output.
• [Software update]: Select to update
software from a network or from USB
storage device.
• [Clear memory]: Delete the previous BD-
Live download on the USB storage device.
A"BUDA"folderisautomaticallycreated
to store the BD-Live download.
• [DivX®VOD Code]: Display the DivX®
registration code or the deregistration
code for this player.
• [Version information]: Display the
software version of this player.
• [Restore default settings]: Reset this
player to the default settings made at the
factory, except for password and parental
control level.
Note
•You cannot restrict Internet access on
commercial Blu-ray discs.
•Before you purchase DivX videos and play
them on this player, register this player on
www.divx.com with the DivX VOD code.
BDP3500_93_UM_V3.0.indb 10 10/9/2014 3:48:21 PM

11
English
EN
3 Update software
Before you update the software of this player,
check the current software version:
• Press , and then select [Setup] >
[Advanced] > [Version information], and
press OK.
Update software via the
Internet
1 Connect the player to the Internet (see
"Setupanetwork").
2 Press , and select [Setup].
3 Select [Advanced] > [Software update]>
[Network].
» If an upgrade media is detected, you
are prompted to start the update.
4 Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Update software via USB
1 Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Softwareanddrivers".
2 Download the software into a USB
storage device.
a Unzip the download, and make sure
that the unzipped folder is named
"UPG".
b Put the "UPG" folder in the root
directory.
3 Connect the USB storage device to the
(USB) connector on this player.
4 Press , and select [Setup].
5 Select [Advanced] > [Software update]>
[USB].
» If an upgrade media is detected, you
are prompted to start the update.
6 Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Caution
•Do not turn off the power or remove the
USB storage device when the software
update is in progress because you might
damage this player.
BDP3500_93_UM_V3.0.indb 11 10/9/2014 3:48:21 PM

12 EN
4 Specifications
Note
•Specicationsaresubjecttochange
without notice
Region code
This player can play discs with the following
region codes.
DVD Blu-ray Countries
China
Media formats
• BD-Video, BD 3D
• DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL (Dual Layer)
• VCD/SVCD
• Audio CD, CD-R/CD-RW, MP3 media,
WMAmedia,JPEGles
• DivX (Ultra)/DivX Plus HD media, MKV
media
• USB storage device
File formats
• Audio:
• .aac,.mka,.mp3,.wma,.wav,.m4a,.ac,
.ogg
• Video:
• .avi, .divx, .mp4, .m4v, .ts, .mov, .mkv,
.m2ts, .mpg, .mpeg, .3gp
• Picture: .jpg, .jpeg, .gif, .png
C
Audio formats
Thisproductsupportsthefollowingaudioles.
Exten-
sion
Con-
tainer
Audio
codec
Bit rate
.mp3 MP3 MP3 Up to 320 kbps
.wma ASF WMA Up to 192 kbps
WMA Pro Up to 768kbps
.aac AAC AAC ,
HE-AAC
Up to 192 kbps
.wav WAV PCM 27.648 Mbps
.m4a MKV AAC 192 kbps
ALAC Up to 192kHz
sampling rate
.mka MKA PCM 27.648 Mbps
AC-3 640kbps
DTS core 1.54 Mbps
MPEG 912 kbps
MP3 Up to 320 kbps
WMA Up to 192 kbps
WMA Pro Up to 768kbps
AAC, HE-
AAC
Up to 192 kbps
.ac FLAC FLAC Up to 24 bit per
sample
.ogg OGG Vorbis Variable bit rate,
maximum block
size 4096
FLAC Up to 192kHz
sampling rate
OGGPCM No limitation
MP3 Upto 320 kbps
Video formats
IfyouhaveahighdenitionTV,thisproduct
allowsyoutoplayyourvideoleswith:
• Resolution: 1920 x 1080 pixels at
• Frame rate: 6 ~ 30 frames per second.
BDP3500_93_UM_V3.0.indb 12 10/9/2014 3:48:22 PM