Philips BDP2600/51 User manual

Register your product and get support at
www.philips.com/welcome
EN User manual
BDP2600

2
Before you operate this Blu-ray disc/ DVD player, read and understand all accompanying instructions.

3
HDMI
( )
HDMI
COAXIAL
C
OA
X
I
A
L
A
A
1
Register your product and get support at
www.philips.com/welcome
EN User manual
BDP2600

4
2
COAXIAL
C
OA
XIA
AL
A
A
COAXIAL
HDMI HDMI {COAXIAL
{HDMI COAXIAL

5
4
3
5
SOURCE
1
2
TV

6
6
USB
DVD/VCD/CD
BD
DivX Plus HD/MKV
MP3 / JPEG
2
3
4
1
3
1
2

English
7
EN
Contents
1 Hookup and play 2-6
2 Use your Blu-ray disc/ DVD player 8
Basic play control 8
Video, audio and picture options 9
DivX videos 10
Play a musical slideshow 11
BonusView on Blu-ray 11
BD-Live on Blu-ray 12
Set up a network 12
Use Philips EasyLink 13
3 Change settings 14
Picture 14
Sound 15
Network (installation, status) 15
Preference (languages, parental control...) 15
Advanced options (BD-Live security, clear memory...) 16
4 Update software 17
Update software via the Internet 17
Update software via USB 17
  18
6 Troubleshooting 20
7 Safety and important notice 22

8EN
2 Use your Blu-ray disc/ DVD player
Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips
offers (e.g. product software upgrade), register your product at www.philips.com/welcome.
Basic play control
During play, press the following buttons to control.
Button Action
Access the home menu.
Open or close the disc compartment.
Stop play.
Pause play.
Press repeatedly to slow forward frame by frame.
Start or resume play.
/ Skip to the previous or next track, chapter or file.
/ Fast backward or forward.
Press repeatedly to change the search speed.
Press once, and then press to slow forward.
AUDIO Select an audio language or channel.
SUBTITLE Select a subtitle language.
DISC
MENU /
POP-UP
MENU
Access or exit the disc menu.
TOP MENU Access the main menu of a video disc.
Color
buttons
Select tasks or options for Blu-ray discs.
Navigate the menus.
Press to rotate a picture clockwise or
counter-clockwise during slideshow.
OK Confirm a selection or entry.
Return to a previous display menu.
Access more options during play.

English
9
EN
Video, audio and picture options
More options are available for video or picture play from a disc or USB storage device.
Video options
Access more options during video play.
• [Audio Language]: Select an audio language.
• [Subtitle Language]: Select a subtitle language.
• [Subtitle Shift]: Change the subtitle position on the screen. Press to change the subtitle
position.
• [Info]: Display play information.
• [Character Set]: Select a character set that supports the DivX video subtitle (only for DivX
videos).
• [Time Search]: Skip to a specific time via the numeric buttons on the remote control.
• [2nd Audio Language]: Select the second audio language (only for Blu-ray discs that support
BonusView).
• [2nd Subtitle Language]: Select the second subtitle language (only for Blu-ray discs that support
BonusView).
• [Titles]: Select a title.
• [Chapters]: Select a chapter.
• [Angle List]: Select a camera angle.
• [Menus]: Display a disc menu.
• [PIP Selection]: Display a picture-in-picture window (only for Blu-ray discs that support
BonusView).
• [Zoom]: Zoom into a video picture. Press to select a zoom factor.
• [Repeat]: Repeat a chapter or title.
• [Repeat A-B]: Mark two points within a chapter for repeat play, or turn off repeat mode.
• [Picture Settings]: Select a predefined color setting.
Note
• Available video options depend on the video source.
1
2
3

10 EN
Picture options
Access more options during slideshow.
• [Rotate +90]: Rotate a picture 90 degrees clockwise.
• [Rotate -90]: Rotate a picture 90 degrees counter-clockwise.
• [Zoom]: Zoom into a picture. Press to select a zoom factor.
• [Info]: Display picture information.
• [Duration per slide]: Set a display interval for a slideshow.
• [Slide Animation]: Select a transition effect for a slideshow.
• [Picture Settings]: Select a predefined color setting.
• [Repeat]: Repeat a selected folder.
Audio options
Press repeatedly to cycle through the following options.
• Repeat the current track.
• Repeat all the tracks on the disc or folder.
• Play audio tracks in a random loop.
• Turn off a repeat mode.
DivX videos
You can play DivX videos from a disc or a USB storage device.
VOD code for DivX
• Before you purchase DivX videos and play them on this player, register this player on www.
divx.com using the DivX VOD code.
• Display the DivX VOD code: press , and select [Setup] > [Advanced] > [DivX® VOD
Code].
DivX subtitles
• Press SUBTITLE to select a language.
• If the subtitle is not displayed correctly, change the character set that supports the DivX
subtitle. Select a character set: press , and select [Character Set].
1
2
3

English
11
EN
Character
set
Languages
[Standard] English, Albanian, Danish, Dutch, Finnish, French, Gaelic, German, Italian, Kurdish
(Latin), Norwegian, Portuguese, Spanish, Swedish, and Turkish
[Central
Europe]
Albanian, Croat, Czech, Dutch, English, German, Hungarian, Irish, Polish, Romanian,
Slovak, Slovene, and Serbian
[Cyrillic] Bulgarian, Belorussian, English, Macedonian, Moldavian, Russian, Serbian, and
Ukrainian
[Greek] Greek
Note
• To play DivX DRM protected files from a USB storage device, connect this player to a TV through HDMI.
• To use the subtitles, make sure that the subtitle file has the same name as the DivX video file name. For
example, if the DivX video file is named “movie.avi”, save the subtitle file as “movie.srt”, or “movie.sub”.
• This player can play subtitle files in the following formats: .srt, .sub, .txt, .ssa, and .smi.
Play a musical slideshow
Play music and pictures simultaneously to create a musical slideshow.
1From a disc or connected USB storage device, play a music file.
2Press , and go to the picture folder.
3Select a picture from the same disc or USB, and press OK to start slideshow.
4Press to stop slideshow.
5Press again to stop music play.
BonusView on Blu-ray
View special content (such as commentaries) in a small screen window.
This feature is only applicable to Blu-ray discs compatible with BonusView (also known as picture in
picture).
1During play, press .
»The options menu is displayed.
2Select [PIP Selection] > [PIP], and press OK.
»PIP options [1]/[2] depend on the video contents.
»The secondary video window is displayed.
3Select [2nd Audio Language] or [2nd Subtitle Language], and press OK.

12 EN
BD-Live on Blu-ray
Access exclusive online services, such as movie trailers, games, ringtones and other bonus contents.
This feature is only applicable to Blu-ray discs that are BD-Live enabled.
1Prepare the Internet connection and set up a network (see “Set up a network”).
2Connect a USB storage device to this player.
• A USB storage device is used to store the downloaded BD-Live content.
• To delete the BD-Live previously downloaded on the USB storage device for memory
release, press and select [Setup] > [Advanced] > [Clear memory].
3Play a disc that is BD-Live enabled.
4On the disc menu, select the BD-Live icon, and press OK.
»BD-Live starts to load.The loading time depends on the disc and the Internet connection.
5On the BD-Live interface, select an item to access.
Note
• BD-Live services vary from discs and countries.
• When you use BD-Live, data on the disc and this player are accessed by the content provider
• Use a USB storage device with at least 1GB of free space to store the download.
Set up a network
Connect this player to the Internet to access the services:
• BD-Live: access online bonus features (applicable to Blu-ray discs that are BD-Live enabled)
• Update software: update the software of this player via the Internet.
1Connect this player to the Internet with a network cable (not supplied).
2Perform the network installation.
1), Press .
2), Select [Setup], and press OK.
3), Select [Network] > [Network Installation], and press OK.
4), Follow the instructions on the TV screen to complete the installation.

English
13
EN
Caution
• Before you connect to a network, familiarize yourself with the network router, and networking principles.
If necessary, read documentation accompanying network components. Philips is not responsible for lost,
damaged or corrupt data.
Use Philips EasyLink
This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control)
protocol.You can use a single remote control to control EasyLink compliant devices that are connected
through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices.
1Connect the HDMI CEC compliant devices through HDMI, and turn on the HDMI CEC
operations on the TV and other connected devices (see the user manual of the TV or other
devices for details).
2Press .
3Select [Setup]> [EasyLink].
4Select [On] under the options: [EasyLink], [One Touch Play] and [One Touch Standby].
»EasyLink function is turned on.
One Touch Play
When you play a disc on this player, the TV automatically switches to the correct video input
source.
One Touch Standby
When a connected device (for example TV) is put to standby with its own remote control, this
player is put to standby automatically.

14 EN
3 Change settings
This section helps you to change the settings of this player.
Note
• You cannot change a menu option that is grayed out.
• To return to the previous menu, press . To exit the menu, press .
Picture
1Press .
2Select [Setup] > [Video] to access the video setup options.
• [TV Display]: Select a picture display format to fit the TV screen.
• [HDMI Video]: Select an HDMI video resolution.
• [HDMI Deep Color]: Display colors with more shades and hues when the video content is
recorded in Deep Color and the TV supports this feature.
• [Picture Settings]: Select a predefined color setting.
Note
• If you change a setting, make sure that the TV supports the new setting.
3
1
2

English
15
EN
Sound
1Press .
2Select [Setup] > [Audio] to access the audio setup options.
• [Night Mode]: Select quiet or full dynamic sound. Night mode decreases the volume of
loud sound and increases the volume of soft sound (such as speech).
• [Neo 6]: Enable or disable a surround sound effect which is converted from 2.0 channel
audio.
• [HDMI Audio]: Set an HDMI audio format when this player is connected through HDMI.
• [Digital Audio]: Select an audio format for the sound output when this player is connected
through a digital connector (coaxial).
• [PCM Downsampling]: Set the sampling rate for PCM audio output when this player is
connected through a digital connector (coaxial).
Note
• Night mode is only available for Dolby encoded DVD and Blu-ray discs.
Network (installation, status)
1Press .
2Select [Setup] > [Network] to access the network setup options.
• [Network Installation]: Start a wired installation to make the network work.
• [View Network Settings]: Display the current network status.

16 EN
Preference (languages, parental control...)
1Press .
2Select [Setup] > [Preference] to access the preference setup options.
• [Menu language]: Select an onscreen display menu language.
• [Audio]: Select an audio language for video.
• [Subtitle]: Select a subtitle language for video.
• [Disc Menu]: Select a menu language for a video disc.
• [Parental Control]: Restrict access to discs that are encoded with ratings. Input “0000” to
access the restriction options. To play all discs irrespective of the rating, select level “8”.
• [Screen Saver]: Enable or disable screen saver mode. If enabled, the screen enters idle
mode after 10 minutes of inactivity (for example, in pause or stop mode).
• [Auto Subtitle Shift]: Enable or disable subtitle shift. If enabled, the subtitle position is
changed automatically to fit the TV screen (this feature works with some Philips TVs only).
• [Change Password]: Set or change a password to play a restricted disc. Input “0000” if you
do not have a password or if you have forgotten your password.
• [Auto Standby]: Enable or disable auto standby. If enabled, the player switches to standby
after 30 minutes of inactivity (for example, in pause or stop mode).
• [VCD PBC]: Display or skip the content menu for VCD and SVCD.
Note
• If your preferred language is not available for disc language, audio or subtitle, you can select [Other] from
the menu options and input 4-digit language code which can be found at the back of this user manual.
• If you select a language which is not available on a disc, this player uses the default language of the disc.
Advanced options (BD-Live security, clear memory...)
1Press .
2Select [Setup] > [Advanced] to access the advanced setup options.
• [BD-Live Security]: Restrict or allow access to BD-Live (only for non-commercial, user-
created BD-Live discs).
• [Software Update]: Select to update software from a network or from USB storage device.
• [Clear memory]: Delete the previous BD-Live download on the USB storage device. A
“BUDA” folder is automatically created to store the BD-Live download.
• [DivX® VOD Code]: Display the DivX® registration code or the deregistration code for
this player.
• [Version Info.]: Display the software version of this player.
• [Restore default settings]: Reset this player to the default settings made at the factory.
Note
• You cannot restrict Internet access on commercial Blu-ray discs.
• Before you purchase DivX videos and play them on this player, register this player on www.divx.com with
the DivX VOD code.
• You cannot reset a parental control setting to the default value.

English
17
EN
4 Update software
Before you update the software of this player, check the current software version:
• Press
, and then select [Setup] > [Advanced] > [Version Info.], and press OK.
Update software via the Internet
1Connect the player to the Internet (see “Set up a network”).
2Press , and select [Setup].
3Select [Advanced] > [Software Update]> [Network].
»If an upgrade media is detected, you are prompted to start the update.
4Follow the instructions on the TV screen to update the software.
»When the update is complete, this player automatically turns off and on again.
Update software via USB
1Check the latest software version on www.philips.com/support.
• Search for your model and click on “Software and drivers”.
2Download the software into a USB storage device.
aUnzip the download, and make sure that the unzipped folder is named “UPG_ALL”.
bPut the “UPG_ALL” folder in the root directory.
3Connect the USB storage device to the (USB) connector on this player.
4Press , and select [Setup].
5Select [Advanced] > [Software Update]> [USB].
»If an upgrade media is detected, you are prompted to start the update.
6Follow the instructions on the TV screen to update the software.
»When the update is complete, this player automatically turns off and on again.
Caution
• Do not turn off the power or remove the USB storage device when the software update is in progress
because you might damage this player.

18 EN
5 Specifications
Note
• Specifications are subject to change without notice
Region code
This player can play discs with the following region codes.
DVD Blu-ray Countries
Russia, India
Playable media
• BD-Video
• DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (Dual Layer)
• VCD/SVCD
• Audio CD, CD-R/CD-RW, MP3 media, JPEG files
• DivX (Ultra)/DivX Plus HD media, MKV media
• USB storage device
File format
• Video: .avi, .divx, .mp4, .mkv
• Audio: .mp3, .wav
• Picture: .jpg, .gif, .png
Video
• Signal system: PAL / NTSC
• HDMI output 480p, 576p, 720p, 1080i, 1080p, 1080p/24
Audio
• HDMI output
• Digital output: 0.5 Vp-p (75 ohm)
• Coaxial
• Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 112 kbps - 320 kpbs
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class (UMS)
• File system: FAT16, FAT32
• Support HDD (a portable hard drive): an external power source may be needed.
C

English
19
EN
Main unit
• Power supply rating: AC 220-230V~, 50 Hz
• Power consumption: 14 W
• Power consumption in standby mode: < 1 W
• Dimensions (w x h x d): 360 x 44 x 210 (mm)
• Net Weight: 1.26 kg
Accessories supplied
• Remote control and a battery
• User manual

• Laser Type (Diode): AlGaInN (BD), AlGaInP (DVD/CD)
• Wave length: 405+7nm/-7nm (BD), 655+10nm/-10nm (DVD), 790+10/-20nm (CD)
• Output power (Max ratings): 1.7mW (BD), 0.19mW (DVD), 0.25mW (CD)

20 EN
6 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing of the player.
To keep the warranty valid, never try to repair the player yourself.
If you have problems using this player, check the following points before you request service. If you still
have a problem, register your player and get support at www.philips.com/welcome.
If you contact Philips, you will be asked for the model and serial number of this player.The model
number and serial number are on the back of this player.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this player do not work.
• Disconnect this player from the power supply for a few minutes, and then reconnect.
Picture
No picture.
• Make sure that the TV has an HDMI connector, and this player is connected to the TV with an
HDMI cable.
• Make sure that the TV is switched to the correct source input for this player.
• Make sure that the HDMI cable is not faulty. If it is faulty, replace with a new HDMI cable.
• On the remote control, press and then press “731” (numeric buttons) to recover picture
display. Or wait for 10 seconds for auto recovery.
• If this player is connected to an unauthorized display device with an HDMI cable, the audio and
video signals may not be output.

• Make sure that the disc contains high-definition video.
• Make sure that the TV supports high-definition video.
Sound
No audio output from the TV.
• Make sure that the TV has an HDMI connector, and this player is connected to the TV with an
HDMI cable.
• Make sure that the TV is switched to the correct source input for this player.
• You may not hear any sound from the HDMI output if the TV is non-HDCP compliant or only
DVI-compatible.
No secondary audio output for picture-in-picture feature.
• When [Bitstream] under the [HDMI Audio] or [Digital Audio] menu is selected, interactive
sound like secondary sound for picture-in-picture feature is muted. Deselect [Bitstream].