Philips CAM110BU/37 Quick start guide

Introduction:
Philips strives to continually bring you the best experience from our products. To obtain the optimal
playback and latest features, you are highly recommended to upgrade the firmware of your device.
Preparation for firmware upgrade:
A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows).
Your device with more than 15 Mb free spaces to hold the firmware file.
Upgrade Procedure:
Step 1: Check your current firmware version
1. Turn on the device.
2. Press and hold the LEFT button.
3. Press TWICE and hold the PLAYBACK.
4. Until you see the below screen, the highlighted red numbers is software version.
5. Compare the firmware version displayed to the latest version. If the existing firmware in your
player is of an earlier version than the new release, please proceed to Step 2.
Otherwise, the latest firmware is installed and hence an upgrade is not needed.
Step 2: Upgrade the firmware for your device
1. Download firmware.
Click on the Download icon in support page to download the new firmware package to your
computer.
1. Check your current firmware
version
2. Upgrade the firmware for your
device
3. Confirm upgrade
successfulness
702-B950L-A02
CAM110
A5SSDK-110323
20110621-XXX-TR

2. Transfer firmware to your device.
NOTE: Ensure that the device battery icon has at least two grids to provide sufficient power
for the upgrade process
i. Connect the device to your PC. Your PC shall recognize it as two icons like drive
“CAM110”and “CAM110 SD”.
Note: Ensure the device has more than 15 Mb free spaces at internal memory
“CAM110”.
ii. Charge up your device if it has less than two grids of battery levels
iii. Copy the firmware such as Philips_CAM110.bin into the root directory of the internal
memory “CAM110”. (the drive without “SD”)
Note: DO NOT rename the bin file.
iv. Disconnect your device from PC safety when the copy is finished
3. Upgrade the firmware in the device
NOTE: Ensure that the device battery icon has at least two grids to provide sufficient power
for the upgrade process
i. Turn on the device.
Notes: Check your battery levels whether indicate at least two grids.
ii. The device screen will show up a few second and automatically detect the firmware
iii. Select “Yes” to start upgrade
iv. Press POWER key to turn off the device when the screen shows the upgrade is
completed.
v. Turn on the device again. Your device will work with the new firmware.
Notes: The copied Firmware will be automatically deleted after the successfully
upgrade.
Step 3: Confirm upgrade successfulness
1. Go over Step 1: Check your current firmware version to verify if the new firmware is
correctly upgraded.
2. If the latest firmware has not been installed, repeat Step 2: Upgrade the firmware for your
device and Step 3: Confirm upgrade successfulness.