Philips CD 711 User manual

PHILIPS
CD
711/721
—
CD
Player
_—
instructions for use
PHILIPS

INDEX
English page 3
ysi|6ug
HuNDDAg
Polski page 23
11S]0q
Slovensky page 43
Aysuaaojs
CESKA REPUBLIKA
Vystraha!
Tento pristroj pracuje s laserovym paprskem. Pfi nesprévné
manipulaci s pristrojem (v rozporu s timto névodem) mize
dojft k nebezpetnému ozdfeni. Prote piistroj za chodu
neotevirejte ani nesnimejte jeho kryty. Jakoukoli opravu védy
svéite specializovanému servisu.
Nebezpeéi!
Pri sejmutf kryti a odjisténf bezpetnostnich spfnati hrozt
nebezpeti neviditelného taserového zéfeni!
Chrafite se pred primym zasahem laserového paprsku.
Zaruka
Tento ptistroj byl vyroben s nejvéts! petlivostf
a nejmodeméjsimi vyrobnimi metodami. Jsme prfesvédteni, Ze
vam bude bezchybné sloutit, pokud budete dodrZovat pokyny
v navodu. V pripadé jakékeli zavady se laskavé obratte na svého
obchodnika nebo primo na servisnf organizaci firmy Philips.
Dhejte téz, aby vam prodavajfci Fadné vyp!nil z4ruénf list.
Pokud by vSak byly na pfistroji shled4ny cizi zdsahy, nebo by!
obsluhovdn v rozporu s pokyny v ndvodu, zérutnf néroky
zanikajf. Zérutni doba je dvanact mésfcti ode dne prodeje.
Pokud byste z jakéhokoli divodu ptistroj demontovali, védy
nejdfive vytahnéte sitovou zastréku.
Pfistroj chrafite pfed jakoukoli vihkostf i pied kapkami vody.
MAGYARORSZAG
MinGdségtantsitas
A garanciajegyen feltintetett forgalombahozé6 vallalat a 2/1984.
(Iil.10.) BkM-IpM egyiittes rendelet értelmében tantsitja, hogy
ezen késziilék megfelel a maszaki adatokban megadott értékeknek.
Figyelem!
A meghibésodott késziléket — beleértve a hdlézati csatlakozét is —
csak szakember (szerviz) javithatja.
Ne tegye ki a késztiléket esnek vagy nedvesség hatés4nak! 2
Garancia
A forgalombahoz6 vallalat a termékre 12 hénap garanciat vallal.
Névieges fesziiltség
Elemes mikédéshez
Névieges frekvencia
Teljesitmény
maximalis
névleges
készenléti dllapotban
Erintésvédelmi osztély Il.
Befoglalé méretek (szélesség, magassdg, mélység)
SEGIOSSEU :tccccsscadesnucsabiteitesesdéccsbinsdaestaipsecadcerwesdiacssine 435 mm
magassdg
mélység
CLASS 1
LASER PRODUCT

CONTENTS
INSTALLATION
Fitting a mains plug (U.K. only)
Power supply setting
Connections
Connecting headphones (CD721 only)
FUNCTIONAL OVERVIEW
Front of player
Remote control (CD721 only)
Display
Display messages
PLAYBACK
Normal playback
Selecting another track
Searching for a passage
Starting with a particular track
Playing the CD in random order
Repeating play
Calling up other time information
Searching the loudest passage
Setting the fade-in and fade-out time
Scanning a CD (CD727 only)
Adjusting the sound level (CD727 only)
PROGRAMMING
Storing a programme
Playing the programme
Erasing a programme
ADDITIONAL INFORMATION
Maintenance
Recycling
Technical data
English

ysi6ug
INSTALLATION
FITTING A MAINS PLUG (U.K. only)
This apparatus Is fitted
with an approved
moulded 13 Amp plug.
To change a fuse in
this type of plug
proceed as follows:
e Remove fuse cover
and fuse.
e Fix new fuse which should be a BS1362 5A,
A.S.T.A. or BSI approved type.
e Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should have
a value of 5A. If a plug without a fuse is used, the
fuse at the distribution board should not be
greater than 5A.
NOTE
The severed plug must be disposed to avoid a
possible shock hazard should it be inserted
into a 13A socket elsewhere.
HOW TO CONNECT A PLUG
The wires in the mains lead are coloured in accor
dance with the following code:
BLUE — “NEUTRAL? (°N*) and BROWN —°LIVE’ (’L’).
As these colours may not correspond with the colour
markings identifying the terminals in your plug, pro-
ceed as follows:
e The BLUE wire must be connected to the ter-
minal which ts marked with the letter "N° or
coloured BLACK.
e The BROWN wire must be connected to the
terminal which is marked with the letter °L’ or
coloured RED.
e Do not connect either wires to the earth termi-
nal in the plug which is marked by the letter "E*
or by the safety earth symbol or coloured green
or green-and-yellow.
Before replacing the plug cover, make certain that
the cordgrip is clamped over the sheath of the
lead — not simply over the two wires.
en
POWER SUPPLY SETTING
¢ Check that the type plate at the bottom of your
player indicates the correct supply voltage.
e lf your mains supply voltage is different, consult
your dealer or our Service Organisation.
CONNECTIONS
mh Mains connection
Connect the mains lead to your mains supply.
Connecting cable to the amplifier
Insert the red plug (right channel!) and the white
plug (left channel) into the corresponding sock-
ets of the CD or AUX input of your amplifier.
You can also use the TUNER or TAPE IN-
connection, but never the PHONO input!
CONNECTING HEADPHONES (CD727 only)
e Connect headphones
with a 6.3 mm jack
plug to the PHONES
socket 77.
e The sound level is
adjusted with the
LEVEL control 73.
ee ee eee
— + ~
ep ee ee

FRONT OF PLAYER
1 POWER ON/STANDBY - Switching on and
off.
2 I(nfra) Ried) SENSOR
Receives the signals from the remote control.
3 DISPLAY - Informs you about the functioning
of the player.
<q and >!
lig til oittlttl &
|
10
11
12
13
Selecting another track.
Selecting a track to start play with.
Fast search to a particular passage during play.
STOP/CP
Stopping play.
Erasing a programme (CP = Clear Programme).
PLAY/REPLAY
Starting play.
Returning to the beginning of a track.
OPEN/CLOSE — Opening and closing the CD
compartment. The compartment also closes
when the front is pressed briefly.
TIME —- Selecting the time information you
want to see.
PEAK SEARCH - Searching the loudest pas-
sage (peak) on a CD or in a programme when
making a tape recording.
FADER — Fading in and out during play.
PROGRAM
Opening the memory when compiling a pro-
gramme.
Storing tracks in a programme.
PHONES (CD7217 only)
Connecting headphones.
REPEAT — Repeating play.
LEVEL (CD727 only) — Adjusting the volume
when listening with headphones.
wm ee a ee
English
7 8 910111213 14 15
14 SHUFFLE - Playback in random order.
15 PAUSE - Interrupting play.
REMOTE CONTROL (CD721 only)
— The life of the batteries of the remote control is
around one year. For replacement only use
batteries of the type RO3, UM4 or AAA.
— The buttons on the remote control have the same
functions as the corresponding ones on the player.
— Extra buttons:
16 SCAN — Automatically playing the beginning
of each track.
17 —VOLUME + — Adjusting the sound level
when the player is connected to an amplifier
or HiFi system without its own remote control.
18 1-0 DIGIT KEYS
— Selecting another track.
— Selecting a track to start play with.
2X15V
RO3 /UM4/ AAA

ysij6ug
FUNCTIONAL OVERVIEW
DISPLAY
a
bt
WAR
LIAL
swveruz
vo
LAN
EM.
EIS
HIN:
EA
TIN
pce
3.2 3 £4 5 & 7 BS 4 10 Wo Fz WW t4 45 ¢
TRACK PEAX TOTAL REM TRACK TIME
PAUSE bed 1D
PAUSE
Lights up when play is interrupted.
(co
Lights up when the player receives a command
from the remote control.
TRACK - Indicates:
— what track is being played;
— the number of tracks on the CD orina
programme.
PEAK
— Flashes when the loudest passage (peak) on a
CD or in a programme is being searched.
— Lights up when the loudest passage (peak) has
been found.
TRACK TIME
Indicates the elapsed playing time of the track
being played.
REM(aining) TRACK TIME
Indicates the remaining playing time of the track
being played.
TOTAL REM([aining) TIME
Indicates the remaining playing time of the CD ora
programme.
TOTAL TIME
indicates the total playing time of the CD or a pro-
gramme.
REPEAT
Lights up when you repeat a CD or a programme.
REPEAT 1
Lights up when you repeat a track.
SHUFFLE
Lights up when the tracks are played in random
order.
— Flashes when a programme is being compiled.
- Lights up when a programme has been stored
in the player memory.
1-15 track number indicator
Shows the number of tracks on the CD.
}
Lights up when there are more than 15 tracks on
the CD.
_
yer rm rr te ee tern ee
DISPLAY MESSAGES
REA il
:
Lights up when the CD's contents list is being
scanned.
noaliSl
Lights up when there is no CD in the CD compart-
ment.
HO AUDIO TISe
Scrolls on the display when insert a non audio CD
(CD-ROM, CD-I or CDV).
WROG TRACK
Scrolls on the display if you select a non-existent
track number.
BOTH PLAY
Scrolls on the display if you try to activate a func-
tion for which you must first start play.
HO To STOP
Scrolls on the display if you try to activate a func-
tion for which you must first stop play.

PLAYBACK
NORMAL PLAYBACK (PLAY/REPLAY)
NOTE! Use only audio CDs; no CD-ROM, CD- 1 or CDV.
e Press POWER ON/STANDBY 7 to switch the player on.
¢ Open the CD compartment by pressing OPEN/CLOSE 7.
— OPEN lights up.
e insert an audio CD, printed side up, and close the compartment by pressing
OPEN/CLOSE 7.
DIGITAL AUDIO
English
~ CLOSE lights up, followed by READ. The number of tracks and the playing time of the CD
are shown on the display.
(eBGUYE
e Press PLAY/REPLAY 6 to start play.
You can also press PLAY/REPLAY immediately after inserting the CD; the compartment
then closes automatically.
You can also close the CD compartment by pressing its front; playback will then start
automatically.
— The number indicator shows how many tracks are on the CD; when a track has been
played its number disappears.
1623 °4 5 6 F 8 39 40 TW 42 3-4 5 6 7 8 9 410 A 42
— The track being played is always shown under TRACK and its elapsed playing time is
shown under TRACK TIME.
fate
— Play will stop after the last track.
e Press POWER ON/STANDBY 17 to switch the player off.
You can interrupt playback by pressing PAUSE 75; PAUSE then lights up.
Press PLAY/REPLAY 6 to restart; if you first press PAUSE again and then PLAY/REPLAY,
the current track starts again from the beginning.
You can also restart play by pressing SCAN 76 (on the remote control - CD727 only) or
SHUFFLE 174.
if you press PLAY/REPLAY during play, the current track starts again from the beginning.
You can stop playback by pressing STOP/CP 5 or OPEN/CLOSE 7.

ys|6uy
PLAYBACK
SELECTING ANOTHER TRACK (<4 >>)
e Press Pl 4 or vase ax ma
<q 4 (less than 0.5 Pe LYS
seconds) untill the sshase
desired track number
appears under TRACK.
— The music stops and a moment later the
selected track begins to play.
You can also enter the number by using the 1-0
digit keys 78 (on the remote control).
Numbers consisting of two figures must be keyed
in within 2 seconds.
SEARCHING FOR A PASSAGE (<< >>>)
e Hold kad 4 down to search backwards to the
beginning.
e Hold i 4 down to search forwards to the
end.
The searching speed is determined by how Iong a
key Is pressed:
— the first 2 seconds fairly slowly, with sound;
— then at the maximum speed, with no sound.
If you reach the end of the last track and release
PP], play will resume a few seconds before the
end of the CD.
STARTING WITH A PARTICULAR TRACK
(<< >>)
e Press > 4 or
<q 4 (less than 0.5
seconds) untill the
desired track number
appears under TRACK.
e Press PLAY/REPLAY 6.
— Play starts from the selected track.
You can also enter the number by using the 1-0
digit keys 78 {on the remote control).
Numbers consisting of two figures must be keyed
in within 2 seconds.
In this case you do not have to press
PLAY/REPLAY; play will automatically start from
the selected track.
PLAYING THE CD IN RANDOM ORDER
(SHUFFLE)
e Press SHUFFLE 74 before or during play.
— lf the CD compartment was open, it will now
close.
— SHUFFLE lights up
and all the tracks are
now played in a
random order.
e Press SHUFFLE again if you wish to return to
normal play.
lf you press k@<@ 4, you will return to a track
which has already been played.
lf you press FI 4, you will select any one of the
following tracks.
lf you press REPEAT 172, twice the tracks will be
repeated in a different order each time, although
the first track played will always be the same.
REPEATING PLAY (REPEAT)
Repeating a track:
e Press REPEAT 72 before or during play.
— REPEAT 1 lights up;
the track will now
be repeated
continuously.
e Press REPEAT twice to stop the track being
repeated.
Repeating the CD:
e Press REPEAT 72 twice before or during play.
- REPEAT lights up;
the CD will now be
repeated
continuously.
e Press REPEAT again to stop the CD being
repeated.
CALLING UP OTHER TIME INFORMATION
(TIME)
e Press TIME 8 re
whenever you want
to know the remain-
ing playing time of
the track being played (REM TRACK TIME).
TRA
f
f:
= © * &$ 9 34 MTZ

SO20
237486 8 7 € 4 % Sf 42
e Press TIME again if
you wish to know
the remaining playing
time of the entire CD
(TOTAL REM TIME).
Press TIME again if ruc
you wish to return to rc Lt !
the elapsed playing ,eseeresnaa
time indication of the
current track (TRACK TIME).
Mug
e
i
Ln
Ld
SEARCHING THE LOUDEST PASSAGE
(PEAK SEARCH)
In STOP mode, press PEAK SEARCH 9.
- Sai ac flashing nals
and the CD or the ee eae
programme willnow | B [ket 1
be scanned for the $s
loudest passage (the peak).
— The display shows the track being scanned and
its elapsed playing time.
— When the loudest os aE
passage has been i a ae |
found it will be | Ee S nt
repeated continuous- aa
ly (from 2 seconds before the peak until 2 sec-
onds after the peak)
You can now adjust your recording device.
You can stop the search by pressing STOP/CP
5 or OPEN/CLOSE 7; if you press
PLAY/REPLAY 6, the CD or the programme will
be played from the beginning.
5 ot
SETTING THE FADE- IN AND FADE-OUT
TIME (FADER)
e During play press FADER 9.
~ The sound level will now gradually decrease
(FADE OUT), after which the player will go into
the PAUSE mode.
e Press FADER again.
— Play continues and the sound level will increase
again to the originally set level (FADE IN).
PLAYBACK
NOTE!
The following functions can only be operated
using the remote contro! (CD727 only).
SCANNING A CD (SCAN)
e Press SCAN 76 before or during play.
— lf the CD compartment was open, it will now
close.
— SCAN lights up for TRACK
2
seconds
and
the
a
|
rm
TI
rm
first
10
seconds
of
|
a
HI
274% 6 7 @ 9 1 41 22
each track are played
in turn; 10 seconds are counted down each
time under REM TRACK TIME.
When the player reaches a track which you
wish to hear in full, press SCAN again or
PLAY/REPLAY 6.
ADJUSTING THE SOUND LEVEL (- VOLUME +)
NOTE!
— Use the - VOLUME + keys only if the player is
connected to an amplifier or HiFi system with-
out its own remote control.
— The setting chosen with - VOLUME + will be
cancelled whenthe player is switched off.
Hold — VOLUME 17 pressed down.
— VOL lights up; the output signal from the player
will now decrease gradually.
~ The successive steps are shown on the display.
Release the key as soon as the required sound
level is obtained.
Hold VOLUME + 17 pressed down.
— VOL lights up; the output signal will now
increase again gradually to the maximum level.
— The successive steps are shown on the display.
WoL_ |lwor= |WoL=
Release the key as soon as the required sound
level is obtained.
| |
|
|
ee ee = a ee ee
English

ysi|bug
PROGRAMMING
STORING A PROGRAMME (PROGRAM and l¢<¢ >>)
You can store 30 tracks from each CD in any required sequence in a programme.
FULL lights up if you exceed the maximum of 30 tracks.
e In STOP mode, press PROGRAM 178 to open the memory.
— PROGA lights up and starts flashing.
¢ Press PP! or <4 (less than 0.5 seconds) untill the first desired track number
appears under TRACK.
Pe 24eE
2 4
¢ Press PROGRAM 78 again.
— The track number has now been stored in the player's memory.
¢ Select the other track numbers required and store each track by pressing PROGRAM.
— The number of tracks and the playing time of your programme will be shown under
TRACK and TOTAL TIME.
& “ipyayly
a: “aa oe * Aw
— The track number indicator always shows which numbers have been stored.
PLAYING THE PROGRAMME (PLAY/REPLAY) ERASING A PROGRAMME
° Press PLAY/REPLAY 6. | (STOP/CP or OPEN/CLOSE)
— Playback starts with the first number of the pro- During play:
gramme. ¢ Press OPEN/CLOSE 7 or STOP/CP 5 (twice).
In STOP mode:
py sel npies Hii apiece ite eae 3 Press OPEN/CLOSE 7 oror STOP/CP 5 (once).
Search for a particular passage is only possible
within the track being played. — The programme has now been erased.
10

ee ~ —
MAINTENANCE
The CDs
e Never write on the printed side of a CD.
e Do not attach any stickers to the CD.
¢ Keep the shiny surface of the
of the disc clean.
Use a soft lint-free cloth and
always wipe the disc in a
straight line from centre to
edge.
e Never use cleaning agents
for conventional records.
e Detergents or abrasive cleaning agents should
not be used either.
The player
e Achamois leather slightly moistened with
water is sufficient for cleaning the player.
e Do not use cleaning agents containing alcohol,
Spirits, ammonia or abrasives.
RECYCLING
Please observe the local regulations regarding the
disposal of packing materials, exhausted batteries
and old equipment.
1. All redundant packaging material has been
omitted. We have done our utmost to make
the packaging easy separable into three mono-
materials:
— cardboard (box)
— expandable polystyrene (buffer)
— polyethylene (bags, protective foam sheet)
2. Your set consists of materials which can be
recycled if disassembled by a specialized com-
pany.
3. Do not dispose of exhausted batteries with
your household waste.
i cn ne rn wee ete eee ee aot a yea at
TECHNICAL DATA
Typical Audio Performance
English
2 Hz - 20 kHz
Amplitude linearity: .......0.3 dB (20 Hz - 20 kHz)
Phase linearity? .........cccseen ene 4° (20 Hz - 20 kHz)
Dynamic Tange? 20.0... ccecsssesserreeeeenes 90 dB (1KHz)
Signal-to-noiSe ratios... 90 dB (1 kHz,)
Channel separation:........cccccecece 90 dB (1kHz)
Total harmonic distortion:........... 0.003% (1kHz)
Audio output level: oo... eesesseeeesevenens 2 Vims
Impedance PHONES socket (CD727 only):
30 - 600 ohms
Power supply
Mains voltage and frequency:
see the type plate on the rear of the player
< 10 W approx.
metal and polystyrene
Dimensions (w x h x d):.....435 x 74 x 263 mm
j 4 kg approx.
Subject to modification
This Compact Disc player complies with
radio interference requirements as laid
down in EC regulations.
11

ysi6uy
TROUBLESHOOTING
lf a fault occurs, run through the points listed below before taking your player for repair.
lf the fault remains, try to clear it by switching the player off and on again. If this also fails to help,
consult your dealer.
Under no circumstances should you repair the player yourself as this will invalidate the
guarantee!
SYMPTOM POSSIBLE CAUSE REMEDY
— The CD has been loaded e Reload the CD, label side up.
upside down.
~ No CD inserted.
— The CD is badly scratched or
dirty.
~ Moisture condensation on
the lens.
— Playback of the CD does not
start or interruption of play-
back.
insert a CD, label side up.
e Clean the CD with a soft,
lint-free cloth.
e Leave the CD player in a
warm environment unt the
moisture evaporates.
— The CD is dirty. e Clean the CD with a soft,
lint-free cloth.
— Sound skips (at the same
part).
~ The CD skips tracks. — The CD is damaged or dirty. Replace or clean the CD.
~ PROGRAM or SHUFFLE
activated.
Switch off SHUFFLE or clear
programme.
— Playback does not start from
the first track.
Check connections.
e Find another place for the
unit or change connections.
Loose or wrong connections.
Strong magnetic fields near
the CD player.
— No sound or bad sound.
Set level control
— No sound or bad sound on
headphones (CD727 only).
Level control set to — posi-
tion.
Headphones plug Is dirty.
e Clean plug.
— Remote contro! does not Batteries are empty. ¢ Replace the batteries.
function(CD721 only).
¢ Use remote control receiver
EM 2200/2201.
Reduce the distance
between remote control and
CD player.
~— The distance between
remote control and
CD player is larger than 10
metres.
— Remote control commands
are not properly received
(CD727 only).
12

ne
re
ee
re
RS
ye
5
a+
a Se or

"Meet PHILIPS at the internet
http://www. philips.com’
CD 711/721
3139 116 16411 TL-9670/34-06
—_— a =, - -— - ~ £? cst ee - _ 2 = ~~ — a ase ee ee KK