5
Tuning in to channels
Selecting the menu language and the country
Automatic store
æPress the
H
menu key.The main menu is displayed.
Remark: the set must be in tv mode (if not, press the jkey).
ÂPress
I
once to select INSTALLATION, then press
L
.
The INSTALLATION menu appears.The LANGUAGE option is activated.
êUse the
KL
keys to select your language.The menus appear in the
language selected. If your language is not available, select ENGLISH.
®Press
J
to select COUNTRY.
†Select your country using the
KL
keys (GB for Great Britain)
Carry out the above operations æto †, then :
ÚSelect AUTO STORE (
J
) and press
L
.Tuning in starts automatically.
The operation takes a few minutes. A display shows the search status and
the number of programmes found. When it has finished, the menu
disappears and the last programme is displayed.
If no programmes are found, refer to theTips chapter on p. 16.
ºIf the transmitter or the cable network broadcasts the automatic sort
signal, the programmes will be correctly numbered.
îIf not, the programmes found will be numbered in descending order starting
at 59, 58, 57, etc. Use the SORT menu to renumber them.
Some transmitters or cable networks broadcast their own sort parameters (region,
language, etc.).Where this is the case, make your choice using the
IJ
keys and
confirm with
L
.
æPress the
H
menu key.The main menu is displayed.
ÂPress
I
once to select INSTALLATION, then press,
L
.
The INSTALLATION menu appears.The LANGUAGE option is activated.
êPress
J
three times to select SORT and then press
L
.
The SORT menu appears.The FROM option is activated.
®Select the programme you wish to renumber using keys
KL
or
0
to
9
.
Example: to renumber the programme 58 as 2, press
58
.
†Selection option A(key
J
) and enter the new number with keys
KL
or
0
to
9
(for the example given, press
2
).
ÚSelect TO (key
J
) and press
L
.The message EXCHANGED appears, the
exchange takes place (
K
to cancel). In our example programme 58 is
numbered as 2 (and programme 2 as 58).
ºSelect the option FROM (key
I
) and repeat stages ®to Úas many times
as there are programmes to renumber.
îTo exit from the menus, press
|
.