Philips DVDR630VR/05 Operating manual

QUICK USE GUIDE 12nc: 8239 300 34221
DVDR630VR
1Remove the antenna cable plug from your TV (or Satellite
Receiver/Cable Box). Connect it to the AERIAL input
socket at the back of the DVD recorder.
2Use the supplied antenna cable to connect the DVD
recorder’s RF.OUT output socket to the antenna input
socket at the back of your TV set.
3Use the supplied scart cable to connect the DVD recorder’s
EURO AV1 AUDIO/VIDEO socket to the SCART socket
at the back of your TV set.
4Connect the power cable from the DVD recorder’s
~ MAINS to the power supply.
Helpful Hints:
If yourTV does not have the above-mentioned
connectors, please refer to the user manual for more
information on others possible connection to your
TV set.
Prepare the remote control
1Press STANDBY-ON 2on the DVD recorder to switch
it on.
2Switch on the TV set and select the correct video in channel.
NO PICTURE! Press the CHANNEL 34 button on the TV to
select the correct video in channel, for example, 'EXT', '0', or 'AV'.
3Press SYSTEM MENU to access the setup menu.
Press 34to select an item in the menu.
Press 2to access the next level options.
Press 1 to go back previous level options.
When you complete, press OK to confirm your selections
and press SYSTEM MENU to exit.
●Channel auto search,
In {GENERAL} select {Auto Programming}.
Press 2to start automatic TV channel search.
Once the TV channel search complete, the total number of
channels will be saved in the tuner’s memory.
●Auto Clock set,
In {GENERAL} select {Clock set}, then press 34to select
{Auto}.
Press OK to confirm the time and clock setting.
If the time and date shown on theTV are not correct,
In {GENERAL} select {Clock set}, then press 34to select
{Manual}.
Press 34to change the first digit and press 12to go to the
previous or next digit field.
Once complete, press OK to confirm.
The DVD recorder is ready for use!
See next page for basic recording and playback.
Start first installationConnect DVD recorder
1 3
2
AERIAL
RF.OUT
RGB
COMPONENT
DVD/VCR OUT AV IN + OUT
STANDBY
ON
OPEN
DIRECT
DUBBING CHANNEL
DVD
DVD
VCR
VCR
OPEN/CLOSE
VCR
DVD
SOURCE RECORD PAUSE PLAY
REWSTOP F.FWD
EJECT
23
1
1
23
4
DVD recorder
back panel
ANTENNA/
CABLE SIGNAL

... cont.
1Switch on the DVD Recorder, press VCR or DVD button to
select VCR or DVD mode for recording. Insert a recordable
DVD+R(W) with the label side facing up.
2Press REC MODE repeatedly to select a desired recording
mode. It defines the picture quality and the maximum
recording time for a disc.
DVD: SP (Standard quality),
LP (Low quality),
XP (High quality),
EP (Extended quality),
VCR: SP (Standard play),
LP (Long play).
3Press CHANNEL 34to select the TV programme
number you wish to record.
➜If you wish to record from additional device (e.g.Video Cassette
Recorder), press INPUT repeatedly on the remote control and to
select the correspond external input channel.
For example, select { AV2 } if you have connected theVCR to
EURO AV2 DECODER scart socket at the back of the DVD
recorder.
4Press REC 0to start recording.
●If required, you can press REC 0repeatedly to recording
time length.
5During recording, you may press PAUSE ;to pause the
recording and press REC 0to continue.
6To stop the recording, press STOP 9.
Basic recording from a TV Start Playback a disc
Detailed playback features and additional functions are described in the
accompanying user manual.
5
1Press DVD to select DVD mode.
2Press OPEN/CLOSE /to open the disc tray, then insert a
disc with the label side facing up.
Press OPEN/CLOSE /again to close the disc tray.
3Playback will start automatically.
➜If a disc menu appears, press 1234to navigate within the
menu, highlight a title and press OK or PLAY 2to start playback.
NO SOUND! Connect the AUDIO L/R (red/white) sockets at
the back of the DVD recorder to the correspond AUDIO input
sockets on a TV set, stereo system or receiver. Turn on the
connected system and select the appropriate channel.
4To stop playback, press STOP 9.
Before using the Remote Control,
●Press DVD on the remote control for DVD functions.
●Press VCR on the remote control for VCR functions.
To play the DVD+R on other DVD players,
you must finalise it first
1Press SYSTEM MENU on the remote control.
2Press 34 to select { Finalise } in the menu and press OK
to start finalising the DVD+R.
Once the DVD+R is finalised, no further recordings
and editings can be made to the disc. Unfinalise a
DVD+R is not possible.
STANDBY
ON
OPEN
DIRECT
DUBBING CHANNEL
DVD
DVD
VCR
VCR
OPEN/CLOSE
VCR
DVD
SOURCE RECORD PAUSE PLAY
REWSTOP F.FWD
EJECT
LABEL
OR
3 4
STANDBY
ON
OPEN
DIRECT
DUBBING CHANNEL
DVD
DVD
VCR
VCR
OPEN/CLOSE
VCR
DVD
SOURCE RECORD PAUSE PLAY
REWSTOP F.FWD
EJECT
LABEL
ALL
ALL
2
SUPER VIDEO
1 2 3 4
PLAY
2
OK
OR
4
1
2
3
4
63
12
3
4
5