Philips Wet & Dry BRE65 Series User manual

BRE65x, BRE64x,
BRE63x, BRE62x,
BRE61x, BRE60x
RU

BRE651/00
BRE650/10
BRE650/00
BRE644/10
BRE644/00
BRE651/00
BRE650/00
BRE650/10
BRE640/10
BRE640/00
BRE634/10
BRE635/00
BRE635/50
BRE630/10
BRE630/01
BRE630/00
BRE620/00
BRE651/00
BRE650/10
BRE650/00
BRE644/10
BRE644/00
BRE644/10
BRE644/00
BRE640/00
BRE651/00BRE640/10
BRE632/00
BRE651/00
BRE650/10
BRE650/00
BRE651/00
BRE650/10
BRE650/00
BRE644/10
BRE644/00
BRE640/10
BRE640/00
BRE634/10
BRE632/00
BRE630/10
BRE630/00
BRE620/00
BRE610/00
BRE651/00
BRE650/10
BRE650/00
BRE640/00
BRE644/00
BRE644/10
BRE640/10
BRE635/00
BRE635/50
BRE632/00
BRE630/10
BRE630/00
BRE651/00
BRE650/10
BRE650/00
BRE644/10
BRE644/00
BRE640/10
BRE640/00
BRE635/00
BRE635/50
BRE634/10
BRE632/00
BRE630/10
BRE630/01
BRE630/00
BRE651/00
BRE650/10
BRE650/00
BRE644/10
BRE644/00
BRE640/10
BRE640/00
BRE635/00
BRE635/50
BRE634/10
BRE630/01
2
1
79 10 12
11
23
24
8
13
19 20 21 22
16
17
18
3
4
5
6
14
15
1

English 6
 14
 23
 31

English
Introduction
Congratulations on your purchase and welcome to Philips! To fully
benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
General description (Fig. 1)
1 Handle
2 Speed lights (I and II)
3 On/off button
4 Battery indicator
5 Release button
6 Socket for small plug
7 Epilating head
8 Integrated light
9 Massage cap
10 Facial area cap
11 Delicate area cap
12 Skin stretcher cap
13 Shaving head
14 Foil
15 Trimmers
16 Comb for shaving head
17 Trimming head
18 Comb for trimming head
19 Coupling unit
20 Body massage head
21 Body exfoliation brush
22 Protection cap for body exfoliation brush
23 Supply unit
24 Tweezers with light
Not shown: Pouch
Not shown: Cleaning brush
Note: The heads and accessories supplied vary for different type
numbers. Consult the overview illustration for the heads and
accessories supplied with your particular appliance.
6English

Charging
Note: Charge the appliance fully before you use it for the first time.
Note: This appliance can only be used without cord.
To charge the appliance, insert the small plug into the socket in the
bottom of the appliance and put the supply unit in the wall socket.
- The charge indicator flashes white (Fig. 2): the appliance is
charging. Chargingtakes up to 1.5 hours.
- The charge indicator lights up white continuously (Fig. 3): the
appliance is fully charged and has a cordless operating time up to
40 minutes.
- The charge indicator does not light up when the appliance is
switched on: the appliance contains enough energy to be used.
- The battery indicator flashes orange (Fig. 2): the battery is almost
empty and needs to be charged. Charge the appliance when you
have finished using it.
Note: If the appliance is fully charged but still connected to the wall
socket, the battery indicator flashes a few times when you press the
on/off button. This indicates that you should disconnect the
appliance from the wall socket before you can switch it on.

Quick charge
- When the battery is completely empty and you start charging it,
the battery indicator flashes white quickly.
- After approximately 15 minutes, the battery indicator starts flashing
white slowly. At this point, the battery contains enough energy for
up to 10 minutes of epilation.
Using the appliance
Attaching and detaching heads
1To attach a head, press it onto the handle ('click') (Fig. 4).
2To detach a head, press the release button on the back of the
appliance (Fig. 5).
7
English

Attaching and detaching accessories
1To attach an accessory, simply snap it onto the head ('click') (Fig.
6).
2To detach an accessory, grab its front and back and pull it upwards
off the head (Fig. 7). To detach a comb, pull its back upwards with
a fingernail (Fig. 8).
Switching the appliance on and off
1To switch on the appliance, press the on/off button once. Speed 2
is selected automatically and speed light II lights up (Fig. 9).
2If you want to select speed 1, press the on/off button again. Speed
light I lights up (Fig. 10).
3To switch off the appliance, press the on/off button once more.
The integrated light goes on automatically to give you a better view
while you use the epilating head (Fig. 11). If you want to switch off the
integrated light, keep the on/off button pressed for 3 seconds when
you switch on the appliance.
Epilating, shaving and trimming
The appliance is suitable for use in the bath or shower, but it can also
be used dry. If you want to use creams or body lotion, apply them
after you have used the appliance.
For gentle, less painful epilation, use the appliance on wet skin with
or without your regular shower gel.
Slight skin irritation like red skin or red dots may occur after epilation.
This is normal. We advise you to epilate before you go to bed at night,
as any redness or skin irritation usually disappears overnight.
Note: The appliance can only be used without cord.
1When you epilate (with or without an accessory on the epilating
head), place the appliance on the skin at the angle shown in the
illustration (Fig. 12).
2When you use the appliance with other heads and accessories
than the epilating head, make sure you place the heads and
accessories flat onto the skin (Fig. 13).
8English

3When you use the appliance on sensitive areas, stretch the skin
with your free hand. When you use the appliance on your
underarms, raise your arm and put your hand on the back of your
head to stretch the skin (Fig. 14).
4Move the appliance slowly against the direction of hair growth (Fig.
15).
Note: If you move the appliance over your skin too fast, you may not
obtain a smooth result.
Note: If your hairs are longer than 3-4mm, pretrim them for easier and
more comfortable epilation.
Epilating head
You can use the epilating head to epilate your legs, underarms and
bikini line.
Select speed 2 for most efficient epilation. Select speed 1 for areas
with little hair growth and for hard-to-reach areas such as knees and
ankles.
Massage cap
You can attach the massage cap onto the epilating head to massage
the skin and minimize the pulling sensation of epilation during use.
Skin stretcher cap
You can attach the skin stretcher cap onto the epilating head. It keeps
the skin tight during epilation to reduce pain.
Delicate area cap
You can attach the delicate area cap onto the epilating head for more
comfortable epilation of delicate areas (e.g. the underarms and bikini
line).
Facial cap
You can attach the facial cap onto the epilating head for precise
epilation of facial hair (e.g. above your upper lip).
Do not use the appliance to epilate eyelashes, eyebrows or
scalp hair.
9
English

Shaving head
You can use the shaving head to shave your legs and body.
Note: The appliance can be moved in two directions, for easier
shaving of underarms.
Note: Always check the foil before use. If it is damaged in any way,
replace the cutting unit right away (see 'Replacement').
Comb for shaving head
You can attach the comb onto the shaving head to trim hairs to a
length of 3mm.
Trimming head
You can use the trimming head to trim hard-to-reach areas in the
bikini zone.
Place the trimming head flat onto the skin to trim (Fig. 16). Place the
trimming head perpendicularly onto the skin for styling and shaping
(Fig. 17).
Comb for trimming head
You can attach the comb onto the trimming head to trim hairs in the
bikini area to a length of 3mm (Fig. 18).
Body massage head
The body massage head rotates firmly to relax your muscles.
Note: You have to put the body massage head on the coupling unit
before you can attach it onto the handle (Fig. 19).
Body exfoliation brush
You can use the body exfoliation brush to remove dead skin cells.
Do not use the body exfoliation brush on your face.
Note: You have to put the body exfoliation brush on the coupling unit
before you can attach it onto the handle (Fig. 20).
Cleaning and storage
Keep the supply unit dry.
10 English

1To clean the epilating head, hold the appliance upside down,
switch it on and rinse it with cold water for 15 seconds after every
use (Fig. 21).
2To clean the shaving head (if supplied): Use the cleaning brush to
brush away any hairs that have collected under the trimmers. Grab
the two trimmers of the cutting unit and pull the cutting unit out of
the shaving head (Fig. 22). Clean all parts of the shaving head with
the cleaning brush, except the foil.
Note: Lubricate trimmer teeth and foils with a drop of sewing
machine oil every six weeks for optimal performance.
3Rinse the cutting unit, heads and accessories under the tap. Shake
them firmly to remove water drops.
4Let all parts dry completely.
5Place the cutting unit back into the shaving head ('click').
6Put protection caps or combs on the heads to prevent damage to
the heads when you store them.
7Store the appliance, its heads and accessories in the pouch.
Note: Lubricate trimmer teeth and foils with a drop of sewing machine
oil every six weeks for optimal performance.
Replacement
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to your Philips dealer. You can
also contact the Philips Consumer Care Center in your country (see
the international warranty leaflet for contact details).
Shaving head (if supplied): For optimal performance, we advise you to
replace the cutting unit of the shaving head every two years. If you
use the shaving head twice or more times a week, replace the cutting
unit more often. Always replace the cutting unit with one of the
original type (CP0634/01).
Body exfoliation brush (if supplied): If you use the body exfoliation
brush 2-3 times a week, it lasts approximately 3 months. Replace the
body exfoliation brush every 3 months with one of the original type
(BRE394).
11
English

Troubleshooting
This chapter summarizes the most common problems you could
encounter with the appliance. If you are unable to solve the problem
with the information below, visit www.philips.com/support for a list
of frequently asked questions or contact the Consumer Care Center
in your country.
Problem Possible cause
The appliance
does not work as
well as it should.
Make sure you hold the appliance at the correct
angle (Fig. 12) and move it across the skin slowly,
against the direction of hair growth.
Clean the heads and accessories after every use.
After charging,
the battery
indicator flashes
when I press the
on/off button,
but the appliance
does not switch
on.
The appliance is still connected to the wall
socket. In this case, the battery indicator flashes
to indicate that you should disconnect the
appliance from the wall socket before you can
switch it on.
During use, the
appliance
becomes hot and
suddenly stops
operating. Then
both speed lights
flash for 4
seconds.
The overheat protection has been activated. The
overheat protection switches off the appliance
automatically if it becomes too hot. To reset the
overheat protection, let the appliance cool down
and then switch it on again. To avoid
overheating of the appliance, do not press it too
hard onto your skin.
My skin is
irritated after I
have used the
appliance.
When you use the epilating head or shaving
head, slight skin irritation like red skin or red dots
may occur. This is normal. To avoid irritated skin,
make sure that you gently move the appliance
against the direction of hair growth. Do not
apply too much pressure. If the irritation lasts
longer than 3 days, we advise you to consult a
doctor.
12 English