Philips HTS5131/12 User manual

HTS5131
Register your product and get support at
www.philips.com/welcome
EN User manual
DA Brugervejledning
DE Benutzerhandbuch
EL Εγχειρίδιο χρήσης
ES Manual del usuario
FI Käyttöopas
FR Mode d’emploi
IT Manuale utente
NL Gebruiksaanwijzing
NO Brukerhåndbok
PT Manual do utilizador
SV Användarhandbok
TR Kullanım kılavuzu

3
English
7 Change settings 26
Picture 26
Sound 26
Language 27
Parental control 27
Energy saving 28
Apply factory settings 28
8 Wall mount and stand 29
Wall mount 29
Stand for home theater and TV -
STS1100/STS1300 29
9 Update software 30
Check software version 30
Update software through the Internet 30
Update software through USB 30
10 Product specications 31
11 Troubleshooting 34
12 Language code 37
13 Index 38
Contents
1 Help and support 4
Tutorials 4
FAQs 4
Contact Philips 4
2 Notice 4
Copyright 4
Compliance 4
Mains fuse 4
Open source software 5
Trademarks 5
3 Important 6
Safety 6
Care for your product 7
Care of the environment 7
4 Your home theater 8
Main unit 8
Remote control 8
5 Connect your home theater 10
Subwoofer 10
Connectors 10
Connect to TV 11
Connect audio from TV and other devices 12
Internet 13
6 Use your home theater 15
Choose sound 15
Discs 16
USB storage devices 18
DivX 19
Audio, video, and picture options 20
Radio 21
MP3 player 22
iPod or iPhone 22
YouTube videos 23
Picasa Web Albums 23
EasyLink 24
EN

4
2 Notice
This section contains the legal and trademark
notices.
Copyright
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Copyright in the UK
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performers Protection Acts 1958 to 1972.
Compliance
This product is in compliance with the essential
requirements and other relevant provisions of
Directives 2006/95/EC (Low Voltage), 2004/108/
EC (EMC).
Mains fuse
This information applies only to products with a
UK mains plug.
This product is tted with an approved molded
plug. If you replace the fuse, use one with:
• the ratings shown on the plug,
• a BS 1362 approval, and
• the ASTA approval mark.
Contact your dealer if you are not sure about
what type of fuse to use.
Caution:To conform with the EMC directive
(2004/108/EC), do not detach the plug from the
power cord.
1 Help and support
Watch video tutorials, download a software
update, and nd answers to many frequently
answered questions (FAQs) on your product at
www.philips.com.
Tutorials
To set up your home theater and get additional
information, refer to the video tutorials at
www.philips.com/support.
FAQs
If you have a problem, refer to the frequently
asked questions (FAQs) for this home theater at
www.philips.com/support.
If you still need help, contact Philips Consumer
Care in your country.
Warning
•Do not attempt to repair your home theater
yourself. This may cause severe injury,
irreparable damage to your home theater, or
void your warranty.
Contact Philips
If you contact Philips, you will be asked for the
model and serial number of your product. The
model number and serial number are on the
back or bottom of your product. Note the
numbers before you call Philips:
Model No. __________________________
Serial No. ___________________________
EN

5
English
Java and all other Java trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and/or
other countries.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide
patents issued & pending. DTS and the Symbol
are registered trademarks, & DTS-HD, and DTS-
HD Master Audio | Essential and the DTS logos
are trademarks of DTS, Inc. Product includes
software. DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
DivX , DivX Certied , DivX Plus™HD and
associated logos are trademarks of DivX, Inc. and
are used under license.
ABOUT DIVX VIDEO: DivX is a digital
video format created by DivX, Inc. This is an
ofcial DivX Certied device that plays DivX
video. Visit divx.com for more information and
software tools to convert your les into DivX
video.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certied device must be registered
in order to play purchased DivX Video-on-
Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
Open source software
Philips Electronics Singapore Pte Ltd hereby
offers to deliver, upon request, a copy of the
complete corresponding source code for the
copyrighted open source software packages used
in this product for which such offer is requested
by the respective licenses. This offer is valid up
to three years after product purchase to anyone
in receipt of this information. To obtain source
code, please contact [e-mail].
If you prefer not to use email or if you do not
receive conrmation receipt within a week after
mailing to this email address, please write to
“Open Source Team, Philips Intellectual Property
& Standards, P.O. Box 220, 5600 AE Eindhoven,
The Netherlands”. If you do not receive timely
conrmation of your letter, please email to the
email address above. The texts of the licenses
and acknowledgements for open source
software used in this product are included on a
separate leaet.
Trademarks
“Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo
are trademarks of Blu-ray Disc Association.
‘DVD Video’ is a trademark of DVD Format/
Logo Licensing Corporation.
BONUSVIEW™
‘BD LIVE’ and ‘BONUSVIEW’ are trademarks of
Blu-ray Disc Association.
‘x.v.Colour’ is a trademark of Sony
Corporation.
EN

6
3 Important
Read and understand all instructions before you
use your home theater. If damage is caused by
failure to follow instructions, the warranty does
not apply.
Safety
Risk of electric shock or re!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
• Never place the product and accessories
near naked ames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or re!
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Risk of injury or damage to the home theater!
• For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident, injury
or damage.
• For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on at, level surfaces that can support the
combined weight of the speaker and stand.
HDMI, the HDMI logo, and High-Denition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
CLASS 1
LASER PRODUCT
EN

7
English
Care of the environment
Your product is designed and manufactured with
high quality materials and components, which
can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences
for the environmental and human health.
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
• Visible and invisible laser radiation when
open. Avoid exposure to beam.
• Do not touch the disc optical lens inside the
disc compartment.
• Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
Risk of overheating!
• Never install this product in a conned
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries if they are exhausted or
if the remote control is not to be used for a
long time.
• Batteries contain chemical substances, they
should be disposed of properly.
Risk of swallowing batteries!
• The product/remote control may contain a
coin type battery, which can be swallowed.
Keep the battery out of reach of children at
all times!
Care for your product
• Do not insert any objects other than discs
into the disc compartment.
• Do not insert warped or cracked discs into
the disc compartment.
• Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
• Use only microber cloth to clean the
product.
EN

8
Remote control
This section includes an overview of the remote
control.
4 Your home theater
Congratulations on your purchase, and welcome
to Philips! To fully benet from the support that
Philips offers, register your home theater at
www.philips.com/welcome.
Main unit
a(Standby-On)
Switch the home theater on or to standby.
b+/- (Volume)
Increase or decrease volume.
cSOURCE
Select an audio or video source for the
home theater.
d(Play/Pause)
Start, pause or resume play.
e(Stop)
Stop play.
fDisplay panel
gPUSH TO OPEN
Push to open the disc compartment.
hDisc compartment
123 4 5678
EN

9
English
p(Mute)
Mute or restore volume.
qBACK
• Return to a previous menu screen.
• In radio mode, press and hold to erase
the current preset radio stations.
rPOP-UP MENU/DISC MENU
Access or exit the disc menu when you play
a disc.
sSource buttons
• Color buttons: Select tasks or options
for Blu-ray discs.
• DISC: Switch to disc source.
• DOCK for iPod: Switch to Philips dock
for iPod or iPhone.
• RADIO: Switch to FM radio.
• SOURCE: Select an audio input
source.
EasyLink controls
With Easylink, you can control your home
theater and the TV with the following buttons
on your home theater remote control (see
‘EasyLink’ on page 24).
• (Standby-On): Press and hold to switch
your home theater, TV and the connected
devices to standby.
• (Play): When a video disc is in the disc
compartment, wake up the TV from
standby, and then play a disc.
a(Standby-On)
• Switch the home theater on or to
standby.
• When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
b(Home)
Access the home menu.
cSOUND SETTINGS
Access or exit sound options.
dNavigation buttons
• Navigate menus.
• In radio mode, press left or right to
start auto search.
• In radio mode, press up or down to
tune the radio frequency.
eOK
Conrm an entry or selection.
fOPTIONS
• Access more play options while playing
a disc or a USB storage device.
• In radio mode, set a radio station.
g+/- (Volume)
Increase or decrease volume.
h(Play)
Start or resume play.
i(Pause)
Pause play.
j/ (Fast Backward/Fast Forward)
Search backwards or forward. Press
repeatedly to change the search speed.
kAlphanumeric buttons
• Enter values or letters (using SMS style
entry).
• In radio mode, select a preset radio
station.
lSUBTITLE
Select subtitle language for video.
mTOP MENU
Access the main menu of a video disc.
n/ (Previous/Next)
• Skip to the previous or next track,
chapter or le.
• In radio mode, select a preset radio
station.
o(Stop)
Stop play.
EN

10
Connect
Connect your subwoofer to your home theater
as described in the Quick start guide.
Setup
Set up your subwoofer through the audio menu.
1Press (Home) on your home theater
remote control, and select [Setup] >
[Audio] > [Subwoofer volume].
2Change the volume.
Connectors
Connect other devices to your home theater.
Side left
a(USB)
Audio, video or picture input from a USB
storage device.
bMUSIC iLINK
Audio input from an MP3 player.
Rear left
aANTENNA FM 75
Signal input from an antenna, cable or
satellite.
1
2
FM(75Ω)
ANTENNA
DOCK for iPod
L
(WHITE)
R
(RED)
AUDIO IN-AUX
COAXIAL
OPTICAL
DIGITAL IN
SUBWOOFER (3Ω)
1
2
3
4
5
6
5 Connect your home
theater
This section helps you connect your home theater
to a TV and other devices.
For information about the basic connections of
your home theater and accessories, see the quick
start guide. For a comprehensive interactive guide,
see www.connectivityguide.philips.com.
Note
•For identication and supply ratings, refer to
the type plate at the back or bottom of the
product.
•Before you make or change any connections,
make sure that all devices are disconnected
from the power outlet.
Subwoofer
Follow the steps below to position, connect, and
set up your subwoofer.
Position
Place the subwoofer at least one meter (three
feet) away from either to the left or right of your
home theater, and ten centimeter away from the
wall.
For best results, place your subwoofer as shown
below.
EN

11
English
cVIDEO OUT
Connect to the composite video input on
the TV.
dAC MAINS~
Connect to the power supply.
Connect to TV
Connect your home theater to aTV to watch videos.
You can listen to audio from TV programs through
your home theater speakers. Use the best quality
connection available on your home theater andTV.
Option 1: Connect to TV through HDMI
(ARC)
Best quality video
Your home theater supports HDMI version
1.4 - Audio Return Channel (ARC). If your TV
is HDMI ARC compliant, connect your home
theater to the TV through the HDMI ARC
connection for easy and quick setup.
With HDMI ARC, you do not need an additional
audio cable to play audio from TV through your
home theater.
1Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
home theater to the HDMI ARC connector
on the TV.
The HDMI ARC connector on the TV might
be labeled HDMI IN or HDMI. For details on
TV connectors, see the TV user manual.
2On your TV, turn on HDMI-CEC. For
details, see the TV user manual.
»When you play a disc on your home
theater, the video is automatically
displayed on TV and the audio is
automatically played on the home theater.
3If audio from the TV does not play
automatically on your home theater, set up
the audio manually (see ‘Set up audio for
connected devices’ on page 13).
TV
bAUDIO IN-AUX
Connect to an analog audio output on the
TV or an analog device.
cDOCK for iPod
Connect to a Philips dock for iPod or
iPhone.(Model: Philips DCK3060)
dDIGITAL IN-COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
eDIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
fSUBWOOFER
Connect to the supplied subwoofer.
Rear center
Wi-Fi
Connect to a Wi-Fi dongle (Model: Philips
WUB1110).
Rear right
aLAN
Connect to the LAN input on a broadband
modem or router.
bHDMI OUT (ARC)
Connect to the HDMI input on the TV.
Wi-Fi
®
1
2
3
4
HDMI OUT
(ARC)
LAN
VIDEO OUT
(YELLOW)
AC MAINS~
EN

12
Option 3: Connect to the TV through
composite video
Basic quality video
If your TV does not have HDMI connectors,
connect your home theater to the TV through a
composite connection. A composite connection
does not support high-denition video.
With a composite connection, you need an
additional audio cable to play the audio from the
TV through your home theater (see ‘Connect
audio from TV and other devices’ on page 12).
1Using a composite video cable, connect the
VIDEO connector on your home theater to
the composite video connector on the TV.
The composite video connector might be
labeled AV IN, VIDEO IN, COMPOSITE,
or BASEBAND.
2On your TV, switch to the correct video input.
3To play audio from TV programs through
your home theater, connect an additional
audio cable (see ‘Connect audio from TV
and other devices’ on page 12).
On your home theater, press SOURCE
repeatedly to select the correct audio input.
Connect audio from TV and
other devices
Play audio from TV or other devices through
your home theater.
Use the best quality connection available on your
TV, home theater, and other devices.
Note
•The audio connections in this user manual are
only recommendations. You can use other
connections too.
•When your home theater and TV are
connected through HDMI ARC, an audio
connection is not required.
TV
Option 2: Connect to TV through HDMI
Best quality video
If your TV is not HDMI ARC compliant, connect
your home theater to the TV through a standard
HDMI connection.
With a standard HDMI connection, you need an
additional audio cable to play the audio from the
TV through your home theater (see ‘Connect
audio from TV and other devices’ on page 12).
1Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
home theater to the HDMI connector on
the TV.
The HDMI connector on the TV might be
labeled HDMI IN.
2On your TV, turn on HDMI-CEC. For
details, see the TV user manual.
»When you play a disc on your home
theater, the video is automatically
displayed on TV and the audio is
automatically played on the home theater.
3To play audio from TV programs through
your home theater, connect an additional
audio cable (see ‘Connect audio from TV
and other devices’ on page 12).
4If audio from the TV does not play
automatically on your home theater, set up
the audio manually (see ‘Set up audio for
connected devices’ on page 13).
Note
•If your TV has a DVI connector, you can use an
HDMI/DVI adapter to connect to TV.
TV
EN

13
English
Set up audio for connected devices
When you connect a device to your home
theater, check the audio settings.
1On your TV and other devices, turn on
HDMI-CEC. For details, see the user
manual of the TV and the other device.
2 Select ‘Amplier’ from the TV speakers
menu. For details, see the TV user manual.
3On your home theater, turn on System
Audio Control, and then map the audio
of the connected device to the correct
connectors on your home theater (see ‘Play
audio from home theater’ on page 25).
If the connected device is not HDMI-CEC
compliant, press SOURCE repeatedly on your
home theater to select the correct audio input.
Internet
Connect your home theater to the internet and enjoy:
• YouTube videos:Browse, search, and watch
YouTube videos through the Internet (see
‘YouTube videos’ on page 23).
• Picasa web albums: Access, search, and view
photos stored in your Picasa web albums
through the Internet (see ‘Picasa Web
Albums’ on page 23).
• BD-Live applications: Access exclusive
services from the BD-Live enabled Blu-ray
discs (see ‘BD-Live on Blu-ray’ on page 18).
• Software update: update the home theater
software through the network (see ‘Update
software through the Internet’ on page 30).
Caution
•Familiarize yourself with the network router and
networking principles before you try to connect
the home theater to a network. If necessary,
read documentation that accompanies the
network components. Philips is not responsible
for lost, damaged, or corrupt data.
VCR
Option 1: Connect audio through a digital
optical cable
Best quality audio
Using an optical cable, connect the OPTICAL
connector on your home theater to the
OPTICAL OUT connector on the TV or other
device.
The digital optical connector might be labeled
SPDIF, SPDIF OUT, or OPTICAL.
Option 2: Connect audio through a digital
coaxial cable
Good quality audio
Using a coaxial cable, connect the COAXIAL
connector on your home theater to the
COAXIAL/DIGITAL OUT connector on the TV
or other device.
The digital coaxial connector might be labeled
DIGITAL AUDIO OUT.
Option 3: Connect audio through analog
audio cables
Basic quality audio
Using an analog cable, connect the AUX
connectors on your home theater to the
AUDIO OUT connectors on the TV or other
device.
TV
EN

14
Check wired network settings
1Press (Home).
2Select [Setup], and then press OK.
3Select [Network] > [View Network
Settings], and then press OK.
»The current network settings are
displayed.
Wireless connection
Connect your home theater to your router
through a wireless connection.
What you need
• A network router (with DHCP enabled).
• A Wi-Fi dongle (Model: Philips WUB1110).
• For software update, make sure that the
network router has access to the Internet
and is not restricted by rewalls or other
security systems.
Set up the wireless network
Connect your home theater to your router as
shown below, and then switch on the devices.
1Connect the home theater to a network
router through a wireless connection (see
‘Wireless connection’ on page 14).
2Turn on your TV, and switch to the correct
source for the home theater.
3Press (Home).
4Select [Setup], and then press OK.
5Select [Network] > [Network Installation]
> [Wireless (Wi-Fi)], and then press OK.
Wi-Fi
www
Wired connection
Connect your home theater to your router
through a network cable.
What you need
• A network router (with DHCP enabled).
• A network cable (RJ45 straight cable).
• For BD-Live application and software
update, make sure that the network router
has access to the Internet and the rewall is
disabled.
Set up the wired network
Connect your home theater to your router as
shown below, and then switch on the devices.
1Connect the home theater to a network
router through a wired connection (see
‘Wired connection’ on page 14).
2Turn on your TV, and switch to the correct
source for the home theater.
3Press (Home).
4Select [Setup], and then press OK.
5Select [Network] > [Network Installation]
> [Wired (Ethernet)], and then press OK.
6Follow the instructions on the TV to
complete the setup.
»The home theater connects to the
internet. If connection fails, select [Retry],
and then press OK.
7Select [Finish], and then press OK to exit.
LAN
www
EN

15
English
6 Use your home
theater
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
• Make the necessary connections described
in the Quick start guide and the user
manual.
• Switch the TV to the correct source for the
home theater.
Choose sound
This section helps you choose the ideal sound for
your video or music.
1Press SOUND SETTINGS.
2Press the Navigation buttons (left/right) to
access the sound options on the display.
Sound settings Description
SOUND Select a sound mode.
SURROUND Select surround sound or
stereo sound.
TREBLE Change the high frequency
output.
BASS Change the low frequency
output.
AUD SYNC Delay the audio to match the
video.
3Select an option, and then press OK.
4Press BACK to exit.
6Follow the instructions on the TV to
complete the setup.
»The home theater connects to the
internet. If connection fails, select [Retry],
and then press OK.
7Select [Finish], and then press OK to exit.
Check wireless network settings
1Press (Home).
2Select [Setup], and then press OK.
3Select [Network] > [View Wireless
Settings], and then press OK.
»The current Wi-Fi settings are displayed.
EN

16
Discs
Your home theater can play DVDs,VCDs, CDs,
and Blu-ray discs. It can also play discs that you’ve
made at home, such as CD-R discs of photos and
music.
What you need
For audio or 2D video:
• Audio and video connection between your
home theater and the TV.
• An audio or a video disc.
Play discs
1When you switch on your home theater,
press PUSH TO OPEN to open the disc
compartment.
2Insert a disc, and then close the disc
compartment.
»Your TV switches to the correct source
and the disc plays automatically.
3If the disc does not play automatically, press
DISC or select [play Disc] in the home
menu, and then press OK.
4Press the play buttons to control play (see
‘Play buttons’ on page 17).
Sound mode
Select predened sound modes to suit your
video or music.
1Press SOUND SETTINGS.
2Select SOUND, and then press OK.
3Press the Navigation buttons (up/down) to
select a setting on the display:
• MOVIE: Enjoy a cinematic audio
experience, specially enhanced for
movies.
• MUSIC: Recreate the original recording
environment of your music, in the
studio or at a concert.
• ORIGINAL: Experience the original
sound of your movies and music,
without added sound effects.
• NEWS: Hear every word with
optimized speech and clear vocals.
• GAMING: Enjoy thrilling arcade
sounds, ideal for action-packed video
games or loud parties.
4Press OK to conrm.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1Press SOUND SETTINGS.
2Select SURROUND, and then press OK.
3Press the Navigation buttons (up/down) to
select the following settings:
• AUTO: Surround sound based on the
audio stream.
• V SURR: Virtual Surround.
• STEREO: Two-channel stereo sound.
Ideal for listening to music.
4Press OK to conrm.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the home theater.
1Press SOUND SETTINGS.
2Select TREBLE or BASS, and then press
OK.
3Press the Navigation buttons (up/down) to
change the frequency.
4Press OK to conrm.
EN

17
English
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1Press SOUND SETTINGS.
2Select AUD SYNC, and then press OK.
3Press the Navigation buttons (up/down) to
synchronize the audio with the video.
4Press OK to conrm.
BonusView on Blu-ray
On Blu-ray discs that support the Bonus
View, enjoy extra content, such as a director’s
commentary, while you watch the main feature.
Bonus View is also known as picture-in-picture.
1Enable Bonus View (picture-in-picture) in
the Blu-ray disc menu.
2While you play the main feature, press
OPTIONS.
»The options menu is displayed.
3Select [PIP Selection] > [PIP], and then
press OK.
»Depending on the video, PIP option [1]
or [2] is displayed.
»The picture-in-picture video is displayed
in a small window.
4Select [2nd Audio Language] or [2nd
Subtitle Language], and then press OK.
5Select the language, and then press OK.
Note
•To turn off Bonus View, press OPTIONS,
select [PIP Selection] > [Off], and then press
OK.
Play buttons
Button Action
Navigation
buttons
Navigate menus.
OK Conrm an entry or selection.
(Play)Start or resume play.
Pause play.
Stop play.
/ Skip to the previous or next
track, chapter or le.
/ Fast backwards or fast
forwards. Press repeatedly to
change the search speed.
Navigation
buttons (up/
down)
Rotate the picture clockwise
or counter-clockwise.
SUBTITLE Select subtitle language for
video.
POP-UP
MENU/DISC
MENU
Access or exit the disc menu.
OPTIONS Access the advanced options
when you play your audio,
video, or media les (see
‘Audio, video, and picture
options’ on page 20).
For video formats such as DivX:
• To stop play, press .
• To resume the video from where you
stopped, press (Play).
• To play the video from the start, press OK.
Display menu forVCD and SVCD
Display the content menu on VCD and SVCD
discs.
1Press (Home).
2Select [Setup] > [Preference], and then
press OK.
3Select [VCD PBC] > [On], and then press
OK.
Note
•To skip the content menu, select [Off].
EN

18
Disable BD-Live
To restrict access to BD-Live, turn on the BD-
Live security.
1Press (Home).
2Select [Setup], and then press OK.
3Select [Advanced] > [BD-Live security] >
[On], and then press OK.
»BD-Live access is restricted.
Note
•You cannot restrict internet access on
commercial Blu-ray discs.
USB storage devices
Enjoy pictures, audio and video on a USB storage
device.
What you need
• A USB storage device that is formatted for
FAT or NTFS le systems, and complies
with the Mass Storage Class.
• A USB extension cable, if the USB storage
device does not t into the connector.
Note
•You can use digital cameras connected by USB
if they can play the les without using a special
computer program.
•To play DivX DRM - protected les from
a USB storage device, connect your home
theater to a TV through an HDMI cable.
Play les
1Connect the USB storage device to the
home theater.
2Press (Home).
»The home menu is displayed.
3Select [browse USB], and then press OK.
»A content browser is displayed.
4 Select a le, and then press OK.
5Press the playback buttons to control play
(see ‘Play buttons’ on page 19).
BD-Live on Blu-ray
On Blu-ray discs with BD-Live content, access
additional features, such as internet chats
with the director, latest movie trailers, games,
wallpaper, and ringtones.
What you need
• a Blu-ray disc with BD-Live content
• an internet connection
• a USB storage device, with at least 1GB of
memory
Note
•BD-Live services vary from country to country,
and depend on the disc.
•When you use BD-Live, data on the disc and
home theater are accessed by the content
provider.
Access BD-Live with a USB storage device
1Connect your home theater to the home
network and internet (see ‘Internet’ on page
13).
2Connect the USB storage device to the
home theater.
• The USB storage device is used
to store the downloaded BD-Live
content.
3Select the BD-Live icon in the disc menu,
and then press OK.
»BD-Live starts to load.The loading time
depends on the disc and your internet
connection.
4Press the Navigation buttons to navigate
BD-Live, and then press OK to select an
item.
Clear memory
If your storage device does not have enough
memory for the BD-Live content, clear the
memory on the storage device.
1Press (Home).
2Select [Setup], and then press OK.
3Select [Advanced] > [Clear memory], and
then press OK.
»This clears the local memory and deletes
the BD-Live les that you downloaded
on your storage device.
EN

19
English
DivX
Play DivX videos from :
• a disc (see ‘Discs’ on page 16),
• a USB storage device (see ‘USB storage
devices’ on page 18).
Note
•To play DivX DRM protected les from a disc
or a USB storage device, connect your home
theater to a TV through an HDMI cable.
VOD code for DivX
Before you purchase DivX videos and play them
on your home theater, register the home theater
on www.divx.com using the DivX VOD code.
1Press (Home).
2Select [Setup], and then press OK.
3Select [Advanced] > [DivX® VOD Code],
and then press OK.
»The DivX VOD registration code for
your home theater is displayed.
Subtitles
If your video has subtitles in multiple languages,
select a subtitle language.
1While playing video, press SUBTITLE to
select a language.
Note
•Make sure that the subtitle le has the same
name as the video le. For example, if the
video le is named ‘movie.avi’, save the subtitle
le as ‘movie.srt’ or ‘movie.sub’.
•Your home theater can play subtitle les in the
following formats: .srt, .sub, .txt, .ssa, .ass, smi,
and .sami. These les do not appear in the le
navigation menu.
•If the subtitles do not appear correctly, change
the character set.
Play buttons
Button Action
Navigation
buttons
Navigate menus.
OK Conrm an entry or selection.
(Play)Start or resume play.
Pause play.
Stop play.
/ Skip to the previous or next
track, chapter or le.
/ Fast backwards or fast
forwards. Press repeatedly to
change the search speed.
Navigation
buttons (up/
down)
Rotate the picture clockwise or
counter-clockwise.
SUBTITLE Select subtitle language for
video.
OPTIONS Access the advanced options
when you play your audio,
video, or media les (see
‘Audio, video, and picture
options’ on page 20).
For video formats such as DivX:
• To stop play, press .
• To resume the video from where you
stopped, press (Play).
• To play the video from the start, press OK.
EN

20
Video options
While watching video, select options such as
subtitles, audio language, time search, and picture
settings. Depending on the video source, some
options are not available.
1Press OPTIONS.
»The video options menu is displayed.
2Press the Navigation buttons and OK to
select and change:
• [Audio Language]: Select audio
language for video.
• [Subtitle Language]: Select subtitle
language for video.
• [Info]: Display information about what
is playing.
• [Character Set]: Select a character set
that supports the DivX subtitle.
• [Time Search]: Skip to a specic part
of the video by entering the time of
the scene.
• [2nd Audio Language]: Select the
second audio language for Blu-ray
video. (For Blu-ray discs only)
• [2nd Subtitle Language]: Select the
second subtitle language for Blu-ray
video. (For Blu-ray discs only)
• [Titles]: Select a specic title.
• [Chapters]: Select a specic chapter.
• [Angle List]: Select a different camera
angle.
• [Menus]: Display the disc menu.
• [PIP Selection]: Display Picture-in-
Picture window when playing a Blu-ray
disc that supports the Bonus View.
(For Blu-ray discs only)
• [Zoom]: Zoom into a video scene or
picture. Press the Navigation buttons
(left/right) to select a zoom factor.
• [Repeat]: Repeat a chapter or title.
• [Repeat A-B]: Mark two points within
a chapter or track to repeat play, or
turn off the repeat mode.
• [Picture Settings]: Select a predened
color setting.
Subtitle character set
If the subtitles do not appear correctly, change
the character set that supports the DivX subtitle.
1Press OPTIONS.
»The options menu is displayed.
2Press the Navigation buttons to select
[Character Set], and then press OK.
3Select a character set.
Character
Set
Language
[Standard] English, Albanian, Danish, Dutch,
Finnish, French, Gaelic, German,
Italian, Kurdish (Latin), Norwegian,
Portuguese, Spanish, Swedish and
Turkish
[Central
Europe]
Albanian, Croat, Czech, Dutch,
English, German, Hungarian, Irish,
Polish, Romanian, Slovak, Slovene
and Sorbian
[Cyrillic] Bulgarian, Belorussian, English,
Macedonian, Moldavian, Russian,
Serbian and Ukrainian
[Greek] Greek
Audio, video, and picture
options
Use advanced features when you play audio, video,
or media les from a disc or a USB storage device.
Audio options
While playing audio, repeat an audio track, a disc,
or a folder.
1Press OPTIONS repeatedly to cycle
through the following functions:
• RPT TRACK / RPT FILE: Repeat the
current track or le.
• RPT DISC / RPT FOLDER: Repeat all
the tracks on the disc or the folder.
• RPT RANDOM: Play audio tracks in
random order.
• RPT OFF: Turn off the repeat mode.
EN