Philips MCD759D/37B User manual

MCD759D
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
1X Docking cradle
8 X iPod dock adaptors
Composite video and audio
cables
(yellow, white, red)
Remote control with two
AAA batteries
Control Cable
FM and AM antennas
DIN Cable
2
User Manual
1
Quick Start Guide
Quick start guide
User manual
MCD759D QSG_37-Eng 2007.6.22, 9:251

Tips
–See the User Manual for other TV
connection options.
– See the related part in the User
Manual if you want to mount the
speakers on the wall.
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
2
4
3
5
Connect the speaker cables.
Connect the AM and FM antennas.
Connect the control cable.
Connect the composite video and audio cables to a TV.
Connect the iPod dock.
6
Connect the power cords of the system andTV.
Front Speaker
(Left)
Center
Speaker
Rear Speaker
(Right)
Rear Speaker
(Left)
Front Speaker
(Right)
Subwoofer
AC power
1
1
AM antenna
FM antenna 2
3
4
6
iPod dock
5
Setting up the TV
1
2
Press SOURCE (DISC on the remote) to select disc source.
Turn on the TV and set it to the correctVideo In channel.
MCD759D QSG_37-Eng 2007.6.22, 9:252

Setting the clock
1
2
3
4
In standby mode, press and hold CLOCK/RDS on the remote.
When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the
remote to set the hours.
Press CLOCK/RDS again and the minute digits flash.Then turn VOLUME-/+ on the
system or press VOL +/- on the remote to set the minutes.
Press CLOCK/RDS again to confirm the time setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive
signals or the cables are not connected accordingly, see the user manual for proper progressive
scan setup or deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit
progressive scan.
Tip
See chapters "Preparations" and "DVD Menu Options" in the User Manual for detailed descriptions.
CLOSED CAPTIONS
1
2
3
Press OPEN •CLOSEç(çon the remote) to open the disc tray and load in a disc,
then press the same button again to close the disc tray.
➜Make sure the label side of the disc is facing up.
Playback will start automatically. If not pressÉÅ.
To stop playback, press PRESET-/9(9on the remote).
Playing a disc
OPEN•CLOSE
MCD759D QSG_37-Eng 2007.6.22, 9:253

Programming and tuning to radio stations
1
2
3
Press SOURCE (TUNER on the remote) to select tuner source.
Press PROGRAM on the remote control for more than two seconds to program all
available stations in order of waveband.
Press PRESET+/- (¡/ ™on the remote control) until the desired preset station is
displayed.
PDCC-JS/JW-0727
Playing Apple iPod using MCD759D
1
2
3
Select the correct dock adaptor, as indicated on each adaptor, then fit it in
the dock.
Correctly place the compatible iPod player into the dock.
Before selecting the iPod source, switch on your iPod player and set:
1) "TV Out" to "On";
2) "TV Signal" to "NTSC";
3) "Widescreen" to "Off". (See your iPod user’s manual for details.)
Press SOURCE on the system repeatedly or iPod on the remote control
to select the iPod source.
Select and play your favourite audio or video files stored in the iPod player.
4
5
Tip
Detailed playback features and
additional functions are described
in the accompany owner's
manual.
Notes for remote control:
–First, select the source you wish to
control by pressing one of the source
select keys on the remote control (DISC or
TUNER, for example).
–Then select the desired function (
2; ,
í , ë for example).
iPod
Music
Photos
Videos
Extras
Settings
Shuffle Songs
Videos
Video Playlists
Movies
Music Videos
Video Podcasts
Video Settings
Settings
TV Out On
TV Signal NTSC
Widescreen Off
Notes:
– HDMI sound/picture output will
be unavailable for the docked iPod
portable player.
– The supported iPod video output
formats are as follows:
(1) H.264 video, 640 by 480
pixels, 30 frames per second;
(2) H.264 video, 320 by 240
pixels, 30 frames per second;
(3) MPEG-4 video, 640 by 480
pixels, 30 frames per second.
– The output picture on the TV
screen may be blurry if the format
of video files in the docked iPod
portable player is 320 by 240
pixels.
MCD759D QSG_37-Eng 2007.6.22, 9:254