Philips HD7994/00 User manual

Cleaning
1 Remove the tea pod holder from the SENSEO®machine and throw away the
T-pod.
2 Disconnect the plastic tea outlet from the bottom of the pod holder by
turning the detachable plastic part anticlockwise (Fig. 3).
3 Clean both parts in hot water.
If necessary, use some washing-up liquid or put the parts in the dishwasher.
4 Make sure the sieve in the centre of the pod holder is not clogged. If the sieve
is clogged, unclog it by rinsing the pod holder under a running tap. If necessary,
use a washing-up brush to clean the sieve.
5 Rinse the parts with fresh water after cleaning.
6 Reconnect the plastic tea outlet to the bottom of the pod holder by turning
the plastic part clockwise. Make sure that the pins of the pod holder slip
properly into the holes of the tea outlet (Fig. 4).
7 Place the tea pod holder back into the machine or store it.
Assistance
For assistance, call toll free: 1-866-473-6736 or visit our website: www.senseo.com.
Information is available 24 hours a day, 7 days a week.
www.philips.com
u
4222 200 00661
HD7994
Tea pod holder
Introduction
Pickwick and Philips have created this tea pod holder exclusively for brewing tea
in your SENSEO®machine with PickwickT-pods.You can now brew your tea as
conveniently and quickly as you brew your coffee.With this special tea pod holder,
you can make a delicious cup of Pickwick tea.
This instruction leaet is a supplement to the user manual of your SENSEO®
machine. It only describes how you should use the specially designed tea pod holder
in your SENSEO®machine. For all other instructions, please consult the user manual
that came with your SENSEO®machine.
This tea pod holder is only suitable for use in SENSEO\
Deluxe and Supreme machine models HD7832, HD7830,
HD7826, HD7824, and HD7820. It is NOT suitable for
use in SENSEO\machine models HD7811 and HD7810.
HD7826
HD7824
HD7820
HD7830
HD7832
3 42
4222.200.0066.1.indd 1 06-09-2006 09:06:47

Never use torn pods or loose tea, as this causes the machine to become blocked.
6 Close and lock the lid.
Make sure the lid is properly locked.
Never brew tea with the lid open.
7 Place one glass or mug with a capacity of at least 5oz under the spout.
HD7832/30 only:The cups you use should have a capacity of at least 4oz when you
select a small cup f, 5oz when you select a medium cup gand 6oz when you select
a large cup h. Do not use cups that are too large, as they cause the tea to get cold
more quickly.
8 Press the 1-cup button q.
The SENSEO®machine starts to brew tea.
The machine automatically supplies the optimal amount of water for one cup of tea.
You can interrupt the brewing process at any time by pressing the on/off button. If
you switch the machine back on after interrupting the brewing process, the machine
does not complete the interrupted brewing cycle.
Do not remove the water reservoir during a brewing cycle, as this causes the
machine to draw in air. When this happens, the next cup is only partly lled.
9 Lift the tea pod holder out of the machine and empty it.
Be careful when you do this.There may still be some water/tea on the T-pod or in
the tea pod holder.
General description (Fig. 1)
AMetal pod holder
BHandle
CDetachable plastic tea outlet
Before first use
Clean the tea pod holder with hot water and some washing-up liquid or in the
dishwasher.
Using the tea pod holder
Tip: If you have just used the SENSEO®machine to make coffee, rinse the machine with
water before you brew tea.This ensures the best taste and temperature for your cup
of tea.To rinse the machine, put the tea pod holder in the machine without a T-pod
and press the 1-cup button.
1 Fill the water reservoir with cold water up to the MAX indication and put it
back onto the machine.
Never pour milk, tea, hot water or carbonated water into the water reservoir.
Make sure that you ll the water reservoir at least to the 2-cup MIN line before
you start to brew tea.
A full reservoir allows you to make tea a number of times.This makes it
unnecessary to ll the water reservoir each time you want to make a cup of tea.
2 Press the on/off button.
The indicator light ashes when the water heats up. This takes approx.
75 seconds.When the light is on continuously, the machine is ready for use.
HD7832/30/26/24 only: the light rings around the 1-cup button qand the
2-cup/1-mug button qq/walso go on when the machine is ready for use.
3 Open the lid of the machine.
If there is still a coffee pod holder in the machine, remove it.
4 Place the Pickwick tea pod holder in the machine.
The 1-cup and 2-cup/1-mug SENSEO®coffee pod holders are NOT suitable for
brewing tea.
5 Select a Pickwick T-pod in your favourite avour and place it properly in the
centre of the metal holder with the convex size pointing downwards (Fig. 2).
Make sure the tea in the pod is evenly distributed and press the pod lightly into the
pod holder.
Only use Pickwick T-pods, as they have been specially designed to brew tea in the
SENSEO®machine with the special tea pod holder.
Each Pickwick T-pod contains the optimal amount of tea for one cup.
-
-
,
,
-
-
1
3 42
4222.200.0066.1.indd 2 06-09-2006 09:06:50