Philips 15PF8946/37 User manual

User Manual
15PF8946/37
17PF8946/37
20PF8946/37
23PF8946/37
Thank you for choosing Philips.
Need help fast?
Read your User Manual and/or Quick-Use Guide first
for quick tips that make using your Philips product
more enjoyable. If you have read your instructions and
still need assistance you may access our online help at
www.p4c.philips.com
or
call 1- 8888 - PHILIPS (744 - 5477)
while with your product.
3139 125 33252
LCD TV
LCD TV
Model No.:
Serial No.:

2
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out.
Complete and return your Product Registration Card at once to ensure:
Return your Product Registration Card today
to get the very most from your purchase.
For Customer Use
Enter below the Serial No. which is
located on the rear of the cabinet. Retain
this information for future reference.
Model No. ________________________
Serial No. ________________________
Know these
safetysymbols
This “bolt of lightning” indicates
uninsulated material within your unit
may cause an electrical shock. For the safe-
ty of everyone in your household, please
do not remove product covering.
The “exclamation point” calls atten-
tion to features for which you
should read the enclosed literature closely
to prevent operating and maintenance
problems.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION:Pour éviter les choc élec-
triques, introduire la lame la plus large de
la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
*Proof of
Purchase
Returning the enclosed card guarantees
that your date of purchase will be on file,
so no additional paperwork will be required
from you to obtain warranty service.
*Product Safety
Notification
By registering your product, you'll receive
notification - directly from the manufac-
turer - in the rare case of a product
recall or safety defect.
*Additional Benefits
of Product Ownership
Registering your product guarantees that
you'll receive all of the privileges to
which you're entitled, including special
money-saving offers.
Visit our World Wide Web Site at http://www.philips.com
t
s
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS.You’ve selected one of the
best-built, best-backed products available today.We’ll do everything in
our power to keep you happy with your purchase for many years to
come.
As a member of the PHILIPS “family,” you’re entitled to protection by
one of the most comprehensive warranties and outstanding service
networks in the industry.What’s more, your purchase guarantees
you’ll receive all the information and special offers for which you
qualify, plus easy access to accessories from our convenient home
shopping network.
Most importantly, you can count on our uncompromising commit-
ment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing in
a PHILIPS product.
P.S. To get the most from your PHILIPS purchase, be
sure to complete and return your Product Registration
Card at once.

3
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and third ground-
ing prong. The wide blade or third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particu-
larly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the app-
aratus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15. This product may contain lead and mercury. Disposal of these
materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance: www.eiae.org
16. Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appli-
ance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties
of its cabinet design.
•Do not compromise these design standards by applying exces-
sive pull force to the front, or top, of the cabinet which could ulti-
mately overturn the product.
•Also, do not endanger yourself, or children, by placing electron-
ic equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product dam-
age and/or personal injury.
18. Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
power lines.
20. Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-
1984, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding connectors, location
of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure below.
21. Object and Liquid Entry - Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through
openings.
a) Warning: To reduce the risk of fire or electric shock, this appa-
ratus should not be exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed on this apparatus.
22. Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
•Install all batteries correctly, with + and - aligned as marked on
the unit.
•Do not mix batteries (old and new or carbon and alkaline, etc.).
•Remove batteries when the unit is not used for a long time.
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
GROUND CLAMP
ELECTRIC SERVICE EQUIPMENT
Example of Antenna Grounding
as per NEC - National Electric Code
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.

4
PRECAUTIONS
ADDITIONAL SAFETY PRECAUTIONS
• ENSURE that LCD TV stand is tightened properly to the set (See Quick Guide on the right way of tightening of the screw
of the stand to the set. Improper tightening of screw may render the set unsafe.
• If LCD TV is installed on the wall, installation should be carried out by qualified servicemen. Improperor incorrect instal
lation may render the set unsafe.
• Disconnect mains plug when :
— cleaning theTV screen, never use abrasive cleaning agents.
— there is a lightning storm.
— the set is left unattended for a prolonged period of time.
• Do not shift or move the LCD TV around when it is powered on.
• Do not touch, push or rub the surface of the LCD screen with any sharp or hard objects.
• When the surface of the LCD screen becomes dusty, wipe it gently with an absorbent cotton cloth or other soft material like
chamois. DO NOT USE acetone, toluene or alcohol to clean the surface of the screen. These chemicals will cause damage
to the surface.
•Wipe off water, or saliva as soon as possible. These liquids can cause deformation and color fading of the LCD screen when
left exposed for some time.
• Be careful of condensation when temperature changes occur. Condensation can cause damage to the LCD screen and elec
trically parts. After condensation fades, spots or blemishes will be present on the LCD screen.
• CAUTION information is located on the inside of the VESA cover (see diagram below). To read information, open
the VESA cover.
POSITIONING THE LCD TELEVISON
• Place the LCD TV on a solid, sturdy base or stand. Be sure the stand is strong enough to handle the weight of the LCD TV.
•Try to leave at least 6 of space around each side of the LCD TV cabinet to allow for proper ventilation.
• Do not place the LCD TV near a radiator or other sources of heat.
• Do not place the LCD TV where it can be exposed to rain or excessive moisture.
RECYCLING PROCEDURE/END OF LIFE DISPOSAL
• To minimize harm to the environment, the batteries supplied with the LCD TV do not contain mercury or nickel cadmium.
If possible, when disposing of batteries, use recycling means available in your area.
• The LCD TV uses materials that can be recycled. To minimize the amount of waste in the environment, check your area for
companies that will recover used televisions for dismantling and collection of reusable materials, or contact your dealer for
TV recycling tips.
• Please dispose of the carton and packing material through the proper waste disposal management in your area.

INTRODUCTION
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . . . . .2
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
INSTALLATION MENU
How to use the Language Controls . . . . . . . . . . . . . . . .6
How to use the Tuner Mode Controls . . . . . . . . . . . . . . . . . . . .6
How to use the Auto Program Controls . . . . . . . . . . . . . . . . . .7
How to use the Channel Edit Controls . . . . . . . . . . . . . . . . . . .7
PICTURE MENU CONTROLS
How to use the Picture Adjustment Controls . . . . . . . . 8
SOUND MENU CONTROLS
How to use the Sound Adjustment Controls . . . . . . . . .9
FEATURE MENU CONTROLS
How to use the Timer Menu Controls . . . . . . . . . . . .10
Understanding the AutoLock™Controls . . . . . . . . . . . . . . . .11
Setting up an AutoLock™Access Code . . . . . . . . . . . . . . . . .12
How to block channels using AutoLock™. . . . . . . . . . . . . . .13
How to lock HD Channel using AutoLock™. . . . . . . . . . . . .14
How to clear all locked channels at the same time . . . . . . . . .15
Blocking programs based on Movie Ratings . . . . . . . . . . . . . . . .16
Blocking programs based on TV Ratings . . . . . . . . . . . . . . . . . .17
Other AutoLock™Blocking options . . . . . . . . . . . . . . . . . . .18
Using the AutoLock™Review screen . . . . . . . . . . . . . . . . . .19
How to use the Contrast+ Control . . . . . . . . . . . . . . . . . . . . .20
How to use the Mode Control . . . . . . . . . . . . . . . . . . . . . . . . .20
How to use the Surf Control . . . . . . . . . . . . . . . . . . . . 21
REMOTE CONTROL RELATED FEATURES
How to use the Format Control . . . . . . . . . . . . . . . . . . . . . . .24
How to use the Sleeptimer Control . . . . . . . . . . . . . . . . . . . . .22
How to use the Closed Captioning Control . . . . . . . . . . . . . .22
How to use the Program List Control . . . . . . . . . . . . . . . . . . .23
How to set the Active Control . . . . . . . . . . . . . . . . . . . . . . . .23
How to use the AutoPicture™Control . . . . . . . . . . . . . . . . . .25
How to use the AutoSound™Control . . . . . . . . . . . . . . . . . .25
SETTING UP THE FM RADIO MODE
How to use the Mode Select Control . . . . . . . . . . . . .26
How to use the Install Controls . . . . . . . . . . . . . . . . . . . . . . . .26
How to use the Timer Controls . . . . . . . . . . . . . . . . . . . . . . . .27
How to use the Sound Controls . . . . . . . . . . . . . . . . . . . . . . .28
How to use the ScreenSaver Control . . . . . . . . . . . . . . . . . . .29
How to use the AutoSound™Control . . . . . . . . . . . . . . . . . .29
SETTING UP THE PC (PERSONAL COMPUTER) MODE
How to use the Picture Controls . . . . . . . . . . . . . . . . .30
How to use the Audio Selection Control . . . . . . . . . . . . . . . . .30
How to use the PC Features Controls . . . . . . . . . . . . . . . . . . .31
SETTING UP THE HD (HIGH DEFINITION) MODE
How to use the HD Select Control . . . . . . . . . . . . . . .32
How to use the Picture Controls . . . . . . . . . . . . . . . . . . . . . . .33
How to use the Sound Controls . . . . . . . . . . . . . . . . . . . . . . .34
How to lock the HD Channel . . . . . . . . . . . . . . . . . . . . . . . . .35
IMPORTANT INFORMATION
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
5
Refer to the simple Quick Use and Setup
Guide (supplied with your TV) for details
on making Connections and Remote
Control Operation.
QUICK USE AND SETUP GUIDE
3121233 42241
Quick Use and Setup Guide
BASIC TV CONNECTIONS
b
P
1
2
ImportantNotice/Warning . . . . . . . . . . . . . . . . . . . .1
MakingBasic TV Connections
BasicCable TV Connections . . . . . . . . . . . . . . . . .1
BasicAntenna TV Connections . . . . . . . . . . . . . . .1
BasicTV Operation . . . . . . . . . . . . . . . . . . . . . . . .2
RemoteBattery Installation . . . . . . . . . . . . . . . . . . .2
RemoteControl Button Descriptions . . . . . . . . . . . .2
Howto Use the Installation Features . . . . . . . . . .3-4
Usingthe Language Control . . . . . . . . . . . . . . . . . .3
Settingthe Tuner Mode Control .. . . . . . . . . . . . . .3
Howto Automatically Program Channels . . . . . . . .3
Howto Add and Delete Channels . . . . . . . . . . . . . .4
Howto set the AutoChron“ Feature(Clock) . . . . .4
Howto Name (Label) Channels . . . . . . . . . . . . . . . .4
IMPORTANT
NOTE:This owner's manual is used with several
differenttelevision models. Notall features (and
drawings)discussed in this manual will necessar-
ily match those found with your television set.
Thisis normal and does not require that you con-
tactyour dealer or request service.
WARNING: TO PREVENTFIRE OR SHOCK
HAZARDDO NOT EXPOSE THIS UNIT TO
RAINOR EXCESSIVE MOISTURE.
Color TV
Color TV
CONTENTS
YourCable TV input into your home may be a single (75 ohm)
cableor a converter box installation. In either case, the con-
nectionto the TV is very easy. Follow the steps below to connect
yourcable signal to your new television.
Ifyour cable signal comes directly from a round 75Πcoaxial
cableuse the following steps:
1
Connectthe open end of the round Cable Company sup-
pliedcable to the 75Πinput on the TV. Screw it down finger
tight.
2
Plugthe television in to the wall outlet and turn the TV on.
Referto the AUTOPROGRAM feature to program all the
availablechannels on your cable signal.
Ifyour cable signal comes from a cable box, use the following
steps:
3
Connectthe open end of the round Cable Company sup-
pliedcable to
thecable signal IN(put) plug on the back of
theCable Box.
4
Usinga separate round coaxial cable, connect one end to the
OUT(put)plug on the back of the Cable Box.
5
Connectthe other end of the round coaxial cable to the
75Πinputon the back of the television. Screw it down finger
tight.
6
Plugthe television in to the wall outlet and turn the TV on.
Referto the TUNER and AUTOPROGRAM features on page
3of this Quick Use Guide. TUNER should be set to the
CABLEoption. AUTOPROGRAM can be set to program all
theavailable channels on your cable signal into the televi-
sions memory.
CABLETV
OUTPUT
INPUT
b
P
5
6
34
DirectCable Connection:
CableBox Connection:
Cablesignal coming from
CableCompany (Round
75Πcoaxialcable)
JackPanel Back of TV
ACPower
WallOutlet
PowerPlug
fromback of TV
JackPanel Back
ofCable Box
CableSignal IN from
theCable Company
Round75Π
CoaxialCable
JackPanel
Backof TV
ACPower
Wall Outlet
PowerPlug
fromback of TV
Acombinationantenna receives normal broadcast chan-
nels(VHF 2—13 and UHF 14—69). Y our connection is
easybecause there is only one 75Π(ohm) antenna plug on
theback of your TV, and that s wherethe antenna goes.
1Ifyour antenna has a round cable (75 ohm) on the end,
thenyou’re ready to connect it to theTV.
Ifyour antenna has flat, twin-lead wire (300 ohm), you
firstneed to attach the antenna wires to the screws on a
300-to 75-ohm adapter.
2Pushthe round end of the adapter (or antenna) onto the
75Π(ohm)plug on the back of the TV. Ifthe round end of
theantenna wire is threaded, screw it down finger tight.
3Plugthe television in to the wall outlet and turn the TV
on.
Referto the TUNER and AUTOPROGRAM features on
page3 of this Quick Use Guide. TUNER should be set to the
ANTENNAoption. AUTOPROGRAM can be set to program
allthe available channels on your cable signal into the televi-
sions memory.
ANTENNATV
b
P
13
2
AntennaConnection:
JackPanel
Backof TV
PowerPlug
fromback of TV
ACPower
Wall Outlet
Round75Π
CoaxialCable
fromAntenna
Twin
LeadWire
300to 75-ohm
Adapter
Outdooror Indoor Antenna
(CombinationVHF/UHF)
Thecombination antenna receives normal
broadcastchannels 2-13 (VHF) and 14-69 (UHF).
GENERAL INFORMATION
Features
Active Control™ continuously measures and corrects all incoming
signals to help provide the best picture quality. This feature moni-
tors and corrects both the sharpness control and noise reduction
control.
Audio/Video Jack Panel allows direct connections with VCRs,
DVDs, or other devices, providing quality TV picture and sound
playback.
Audio Volume Leveler (AVL) Control keeps the TV sound at an
even level. Peaks and valleys that occur during program changes or
commercial breaks are reduced, making for a more consistent, com-
fortable sound.
AutoLock™allows you to block the viewing of certain channels or
programs with certain ratings if you do not want your children to
view inappropriate materials.
AutoPicture™allows you to change the picture settings (color,
tint, contrast, etc.) for various types of programming, such as
sports, movies, multimedia (games), or weak signals with the push
of one button.
AutoSound™allows you to select from three factory-set controls
and a personal control that you set according to your own prefer-
ences through the onscreen Sound menu. The three factory-set con-
trols (Voice, Music, and Theatre) enable you to tailor the TV sound
so as to enhance the particular programming you are watching.
Channel Edit allows you to add or delete channels from the list
stored in the TV s memory. Channel Edit makes it easy to limit or
expand the number of channels that are available to you when you
press the Channel (+) or (—) buttons on your remote control.
Closed Captioning allows the viewer to read TV program dialogue
or voice conversations as onscreen text.
Infrared Remote Control works your TV and other remote-con-
trolled devices, such as VCRs, DVD players, cable converters, and
satellite receivers.
Onscreen Menu shows helpful messages and instructions for set-
ting TV feature controls (can be viewed in English, French, or
Spanish).
Sleep Timer automatically turns the TV OFF after a set amount of
time that you choose.
Timer allows you to set your TV to turn itself ON and OFF once or
daily like an alarm clock.
Active Control, AutoPicture, and AutoSound Surround are trade-
marks of Philips Consumer Electronics Company. Copyright
2001 Philips Consumer Electronics.
*Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby Laboratories.
CONTENTS
How to use the Timer Menu Controls . . . . . . . . . . . . . . . . . .32
How to lock the HD Channel . . . . . . . . . . . . . . . . . . . . . . . . .35

6
5
2
4
3
5
1
1
4
5
2
3
4
6
HOW TO USE THE INSTALLATION FEATURES
For our Spanish and French-speaking TV own-
ers, an onscreen Language option is present.
The Language control enables you to set the TV's
onscreen menu to be shown in either English,
Spanish or French.
1Press the MENU button on the remote control
to show the onscreen menu.
2Press the CURSOR DOWN button repeatedly
until Install is highlighted.
3Press the CURSOR RIGHT button to access
the Install menu. Language will be highlighted.
4Press the CURSOR RIGHT or CURSOR
LEFT button to select English, Francais or
Español.
5Press the STATUS/EXIT button to remove the
menu from the screen.
Install
Language English
Tuner Mode
É
Auto Program É
Channel Edit É
ÑÉ
Idioma Ñ Español É
OR
ÑÉ
Langue Francais
OR
TV Menu
Picture Brightness
Sound Color
Features Picture
Install Sharpness
Mode Tint
TV Menu
Picture Language
Sound Tuner Mode
Features Auto Program
Install Channel Edit
Mode
LANGUAGE
Remember, the Language control makes only the
TV's onscreen Menu items appear in English,
Spanish, or French text. It does not change the other
onscreen text features, such as Closed Captioning
(CC), with TV shows.
HELPFUL HINT
TUNER MODE
TV Menu
Picture Brightness
Sound Color
Features Picture
Install Sharpness
Mode Tint
TV Menu
Picture Language
Sound Tuner Mode
Features Auto Program
Install Channel Edit
Mode
Install
Language É
Tuner Mode Cable
Auto Program É
Channel Edit É
ÑÉ
ÑÉ
Tuner Mode Antenna
OR
ÑÉ
Tuner Mode Auto
OR
The Tuner Mode allows you to change the TV's
signal input to Cable, Antenna, or Auto Mode.
It s important for the TV to know what type of sig-
nal is connected, either Antenna or Cable.
1Press the MENU button on the remote control
to show the onscreen menu.
2Press the CURSOR DOWN button repeatedly
until Install is highlighted.
3Press the CURSOR RIGHT button to access
the Install menu. Language is highlighted.
4Press the CURSOR DOWN button to select
the Tuner Mode control.
5Press the CURSOR RIGHT or CURSOR
LEFT button to select Cable, Antenna, or
Auto. If Tuner Mode is set to Auto, Auto
Porgram will detect if a cable signal is present.
6Press the STATUS/EXIT button to remove the
menu from the screen.
When Cable is selected, channels 1-125
are available.
When Antenna is selected, channels 2-69
are available.
HELPFUL HINT
Install
Language English
Tuner Mode
É
Auto Program É
Channel Edit É
ÑÉ

1
2
3
65
4
7
HOW TO USE THE INSTALLATION FEATURES
A UTO P ROGRAM
Your TV can automatically set itself for local area (or cable TV) channels. This makes it easy for
you to select only the TV stations in your area by
pressing the CHANNEL (+) or (–) button.
1Press the MENU button on the remote control to
show the onscreen menu.
2Press the CURSOR DOWN button repeatedly
until Install is highlighted.
3Press the CURSOR RIGHT button to enter the
Install menu. Language will be highlighted.
4Press the CURSOR DOWN button repeatedly
until Auto Program is selected. Start ? will
appear.
5Press the CURSOR RIGHT button to start the
Auto Programming process.
6Press the STATUS/EXIT button to remove the
menu from the screen when the Auto programming
process has finished.
After you ve run Auto Program, check out the
results. Press the CHANNEL (+) or (–) button and
see which channels you can select.
Remember, an antenna or cable TV signal must first
be connected to your TV, see Quick-Use Guide for
making connections.
HELPFUL HINT
C HANNEL E DIT
Channel Edit makes it easy for you to add or delete channels from the list of channels stored in the TV's
memory.
1Press the MENU button on the remote control to
show the onscreen menu.
2Press the CURSOR DOWN button repeatedly until
Install is highlighted.
3Press the CURSOR RIGHT button to enter the
Install menu. Language will be highlighted.
4Press the CURSOR DOWN button repeatedly until
Channel Edit is selected.
5Press the CURSOR RIGHT button to enter the
Channel Edit menu. Channel will be highlighted.
6Press the CURSOR RIGHT or CURSOR LEFT
buttons to scroll through the list of available chan-
nels, you can also press the CH+ or CH- to scroll
through the list of channels. Or, press the numbered
buttons to select a specific numbered channel.
7Press the CURSOR DOWN button to select
Skipped while you are tuned to the channel to be
skipped.
8Press the CURSOR LEFT or CURSOR RIGHT
button to select On to activate the skipping of a chan-
nel. Or, select Off, to deactivate the skipping of a
channel.
9Press the STATUS/EXIT button to remove the
onscreen menu from the screen.
TV Menu
Picture
Brightness
Sound Color
Features Picture
Install Sharpness
Mode Tint
TV Menu
Picture
Language
Sound Tuner Mode
Features Auto Program
Install Channel Edit
Mode
Auto Program
Channel
É
8
ÑÉ
Install
Language É
Tuner Mode É
Auto Program Ñ Start ? É
Channel Edit É
TV Menu
Picture Brightness
Sound Color
Features Picture
Install Sharpness
Mode Tint
TV Menu
Picture Language
Sound Tuner Mode
Features Auto Program
Install Channel Edit
Mode
Channel Edit
Channel
Ñ 8 É
Skipped É
Channel Edit
Channel
É
Skipped Ñ On É
Install
Language É Channel
Tuner Mode
É Skipped
Auto Program
É
Channel Edit É
6
2
4
7
6
3
5
6
8
1
9
6
8

8
HOW TO USE THE PICTURE ADJUSTMENT CONTROLS
To adjust your TV picture controls, select a channel
and follow these steps.
1
Press the MENU button on the remote control
to show the onscreen menu.
2
Press the CURSOR DOWN button to highlight
Picture.
3
Press the CURSOR RIGHT button to enter the
Picture menu. Brightness will be highlighted.
4
Press the CURSOR UP or CURSOR DOWN
button to select the picture adjustment you want
to change: Brightness, Color, Picture,
Sharpness, Tint, or Color Temp..
5
Press the CURSOR LEFT or CURSOR
RIGHT button to adjust the selected control.
6
Press the STATUS/EXIT button when finished
to remove the menu from the screen.
Remember, when the bar scale is centered
, the control settings are at normal,
mid-range levels.
NOTE: The Shaprness and Tint Controls will not
be available for adjustments when tuned to the
CVI Inputs.
Brightness – adds or subtracts light from the dark-
est part of the picture.
Color – adds or eliminates color .
Picture– improves the detail of the lightest parts of
the picture.
Sharpness – improves the detail in the picture.
Tint– adjusts the picture to obtain natural skin
tones.
Color Temp. –offers NORMAL, COOL, or
WARM picture preferences. (Normal will keep the
whites, white; Cool will make the whites, bluish;
and Warm will make the whites, reddish.)
HELPFUL HINT
TV Menu
Picture Brightness
Sound Color
Features Picture
Install Sharpness
Mode Tint
…
Picture
Brightness
É
Color
É
Picture
É
Sharpness É
Tint É
Color Temp Normal
ÑÉ
Picture
Brightness 48
Color
É
Picture É
Sharpness É
Tint É
Color Temp É
Picture
Brightness
É
Color 38
Picture
É
Sharpness É
Tint É
Color Temp É
Picture
Brightness
É
Color É
Picture 42
Sharpness
É
Tint É
Color Temp É
Picture
Brightness
É
Color
É
Picture É
Sharpness 2
Tint
É
Color Temp É
Picture
Brightness
É
Color
É
Picture
É
Sharpness É
Tint 3
Color Temp
É
É
▼
1
2
64
4
53
5

9
HOW TO USE THE SOUND ADJUSTMENT CONTROLS
T
o adjust your TV sound controls, select a channel and
follow these steps.
1
Press the MENU button on the remote control
to show the onscreen menu. Picture will be high-
lighted.
2
Press the CURSOR DOWN button to highlight
Sound.
3
Press the CURSOR RIGHT button to enter the
sound menu.
4
Press the CURSOR UP or CURSOR DOWN
button to select the sound adjustment you want
to change: Equalizer, Balance, AVL, Dolby
Virtual, SAP, or Sound.
5
Press the CURSOR LEFT or CURSOR
RIGHT button to adjust the selected control.
NOTE : If Equaliser is selected, press the
CURSOR RIGHT button to enter Equaliser
menu and press the CURSOR UP or
CURSOR DOWN button to select from
120Hz to 10KHz. Then press the CURSOR
LEFT or CURSOR RIGHT button to adjust
the selected control.
6
Press the STATUS/EXIT button when finished
to remove the menu from the screen.
Sound
Equalizer
É
Balance É
AVL É
Dolby Virtual Mono
SAP É
Sound É
OR
Sound
Equalizer
É 120 Hz
Balance
É 500 Hz
AVL
É 1500 Hz
Dolby Virtual É 5 KHz
SAP
É 10 KHz
Sound
É
Sound
Equalizer
É
Balance 0
AVL
É
Dolby Virtual É
SAP É
Sound É
Sound
Equalizer
É
Balance É
AVL On
Dolby Virtual
É
SAP
É
Sound É
Sound
Equalizer
É
Balance É
AVL É
Dolby Virtual Stereo
SAP É
Sound É
ÑÉ
Sound
Equalizer
É
Balance É
AVL É
Dolby Virtual Dolby Virtual
SAP É
Sound É
ÑÉ
ÑÉ
Sound
Equalizer
É
Balance É
AVL É
Dolby Virtual Spatial
SAP É
Sound É
ÑÉ
É
▼
▼
É
Sound
Equalizer
É
Balance É
AVL É
Dolby Virtual
É
SAP Off
Sound
É
ÑÉ
Sound
Equalizer
É
Balance É
AVL É
Dolby Virtual
É
SAP On
Sound
É
ÑÉ
▼
Sound
Equalizer
É
Balance É
AVL É
Dolby Virtual
É
SAP É
Sound Stereo
ÑÉ
Sound
Equalizer
É
Balance É
AVL É
Dolby Virtual
É
SAP É
Sound Mono
ÑÉ
▼
É
É
OR
OR
OR
TV Menu
Picture Equaliser
Sound Balance
Features AVL
Install Dolby Virtual
Mode SAP
Equalizer — adjusts the sound tones. Select
120Hz to 10KHz.
Balance —adjusts the level of sound coming
from the left and right speakers.
AVL (Auto Volume Leveler) - when On, AVL
will level out the sound being heard when sud-
den changes in volume occur during commer-
cial breaks or channel changes.
Dolby Virtual - adds greater depth and dimen-
sion to TV sound. Select from Dolby Virtual
or Stereo sound (if Stereo) or Spatial or Mono
(if Mono).
SAP (Secondary Audio Programming)— sent
as a third audio channel, a SAP signal can be
heard apart from the current TV program
sound. Note: If SAP is not available, Not
Available will appear on the screen.
Sound —select from Stereo or Mono.
HELPFUL HINT
1
2
4
3
5
4
6
5
ÑÉ

10
HOW TO USE THE TIMER MENU CONTROLS
Your television comes with an onscreen clock. The
TV can also be set to turn on or off at a specific
time and tune to a specific channel when it powers
itself on.
1
Press the MENU button on the remote control to
show the onscreen menu.
2
Press the CURSOR DOWN button to highlight
Features.
3Press the CURSOR RIGHT button
to enter the
Features menu.
4Press the CURSOR UP or CURSOR DOWN
button to highlight one of the Timer controls.
These controls are Time, Start Time, Stop
Time, Channel No., Activate, or Display.
5Press the CURSOR RIGHT or CURSOR
LEFT button to make adjustments or to toggle
the On or Off.
Time : Enter the current time using the Numbered
buttons. Use the CURSOR LEFT or CURSOR
RIGHT buttons to toggle the AM and PM setting.
Start Time: Use the numbered buttons to enter
the time you want the channel to turn itself On.
Use the CURSOR RIGHT and CURSOR LEFT
buttons to toggle the AM and PM setting.
Stop Time: Use the numbered buttons to enter
the time you want the TV to turn itself Off. Use
the CURSOR RIGHT and CURSOR LEFT but-
tons to toggle the AM and PM setting.
Channel No. : Use the NUMBERED buttons or
the CH + or CH- buttons to enter the desired
start-up channel. You can also press the CUR-
SOR RIGHT or CURSOR LEFT buttons to
enter the desired start-up channel.
Activate: Set the timer to turn itself On (Once
or Daily) or Off. Press the CURSOR RIGHT
and CURSOR LEFT buttons to select Once,
Daily, or Off.
Display: Press the CURSOR RIGHT or CUR-
SOR LEFT to toggle between On or Off. If On
is selected, the time will be displayed all the
time when the TV is on. When Off is selected,
the time will only appear when the
STATUS/EXIT button is pressed.
6Press the STATUS/EXIT button to remove the
menu from the screen.
Timer
Time — — : — — PM
Start Time
É
Stop Time É
Channel No. É
Activate É
Display É
ÑÉ
Timer
Time
É
Start Time ——:——PM
Stop Time É
Channel No. É
Activate É
Display É
Ñ
É
Timer
Time
É
Start Time É
Stop Time — — : — — PM
Channel No.
É
Activate É
Display É
Ñ
É
Timer
Time
É
Start Time É
Stop Time É
Channel No. 8
Activate
É
Display É
Ñ
É
Timer
Time
É
Start Time
É
Stop Time É
Channel No. É
Activate Once
Display
É
Ñ
É
Timer
Time
É
Start Time É
Stop Time É
Channel No. É
Activate É
Display On
Ñ
É
▼
É
Features
Timer Time
Autolock
É Start Time
Contrast + É Stop Time
Channel No.
Activate
TV Menu
Picture Timer
Sound Autolock
Features Contrast +
Install
Mode
1
2
4
3
5
4
6
5
55
É
IMPORTANT
For the Timer to function, the set must not be
turned off. It must be at standby mode. Once
the set is turned off, the Timer is disabled.
HELPFUL HINT
Active Control
Active Control
É

11
The AutoLock™feature receives and
processes data sent by broadcasters or
other program providers that contain pro-
gram content advisories. When programmed
by the viewer, a TV with AutoLock™can
respond to the content advisories and block
program content that may be found objection-
able (such as offensive language, violence,
sexual situations, etc.). This is a great feature
to censor the type of programming children
may watch.
In the AutoLock™section, you ll learn how
to block channels and programming that is
not rated, is unrated, or has no rating. You
will also find out how to turn these blocking
features ON or OFF. Following are brief
explanations of some terms and ratings relat-
ed to the AutoLock™feature.
AutoLock™offers various Blocking
Options from which to choose:
BLOCKING: The BLOCKING control is
what can be thought of as the master switch
for AutoLock™. This control affects the set-
tings you have chosen for blocking programs
according to movie ratings or TV ratings, or
for blocking programs that have no rating or
are unrated. When the BLOCKING control is
OFF, the blocking or censoring of programs is
disabled. When the BLOCKING control is
ON, blocking will occur according to the set-
tings you have chosen.
NO RATING: ALL programming with no
content advisory data can be blocked if NO
RATING is set to ON.
Programming that has No Rating is not
encoded with any rating information from the
MPAA or the Parental Guidelines. Any pro-
gramming could fall into this category.
You also can block individual channels or
block programming based on ratings of the
MPAA and TV broadcasters. (See a descrip-
tion of the ratings on this page.)
UNDERSTANDING THE AUTOLOCK™CONTROLS
G: General Audience - All ages admitted.
Most parents would find this programming
suitable for all ages. This type of program-
ming contains little or no violence, no
strong language, and little or no sexual dia-
logue or sexual situations.
PG: Parental Guidance Suggested -
This
programming contains material that parents
may find unsuitable for younger children. It
may contain one or more of the following:
Moderate violence, some sexual situations,
infrequent coarse language, or some sugges-
tive dialogue.
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the
age of 13. It contains one or more of the fol-
lowing: violence, sexual situations, coarse
language, or suggestive dialogue.
R: Restricted -This programming is specifi-
cally designed for adults. Anyone under the
age of 17 should view this programming
only with an accompanying parent or adult
guardian. It contains one or more of the fol-
lowing: intense violence; intense sexual situ-
ations; strong, coarse language; or intensely
suggestive dialogue.
NC-17: No one under the age of 17 will be
admitted. - This type of programming should
be viewed by adults only. It contains graphic
violence; explicit sex; or crude, indecent lan-
guage.
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intense-
ly suggestive language.
MOVIE RATINGS
(M OTION P ICTURE A SSOCIATION OF A MERICA )
TV-Y: (All children -- This program is
designed to be appropriate for all children.)
Designed for a very young audience, including
children ages 2-6. This type of programming is
not expected to frighten younger children.
TV-Y7: (Directed to Older Children -- This
program is designed for children ages 7 and
above.) It may be more appropriate for children
who have acquired the development skills
needed to distinguish between make-believe
and reality. This programming may include
mild fantasy and comic violence (FV).
TV-G: (General Audience -- Most parents
would find this program suitable for all ages.)
This type of programming contains little or no
violence, no strong language, and little or no
sexual dialogue or sexual situations.
TV-PG: (Parental Guidance Suggested --
This program contains material that parents
may find unsuitable for younger children.) This
type of programming contains one or more of
the following: Moderate violence (V), some
sexual situations (S), infrequent coarse lan-
guage (L), or some suggestive dialogue (D).
TV-14: (Parents Strongly Cautioned -- This
program contains some material that many
parents would find unsuitable for children
under 14 years of age.) This type of program-
ming contains one or more of the following:
intense violence (V); intense sexual situations
(S); strong, coarse language (L); or intensely
suggestive dialogue (D).
TV-MA: (Mature Audience Only -- This pro-
gram is specifically designed to be viewed by
adults and therefore may be unsuitable for chil-
dren under 17.) This type of programming con-
tains one or more of the following: graphic vio-
lence (V); explicit sexual situations (S); or
crude, indecent language (L).
TV PARENTAL GUIDELINES
(TV BROADCASTERS)
Movie Rating
GOn
PG
É
PG-13 É
R
É
NC-17 É
X É
Ñ
É
TV Rating
TV-Y On
TV-Y7
É
TV-G É
TV-PG
É
TV-14 É
TV-MA É
É
Ñ

12
SETTING UPANAUTOLOCK™ACCESS CODE
AutoLockTM allows parents to block out or
censor any channels they think childr en
should not watch. A channel blocked by the
AutoLockTM control cannot be viewed until a cor-
rect access code is used to unlock the channel
for viewing. First, let s set your AutoLock access
code.
1Press the MENU button on the remote
control to show the onscreen menu.
2Press theCURSOR DOWN button to
highlight Features.
3Press the CURSOR RIGHT button to
display the Features menu.
4Press the CURSOR DOWN button to
highlight the AutoLock control.
5Press the CURSOR RIGHT button to
enter the AutoLock mode. Access Code
---- will appear .
6Using the numbered buttons on the
remote control, enter the access code. If
you do not know your code, 0,7,1,1 is the
default code. After you have entered the
code once, Incorrect will appear on the
screen. Enter the code a second time. It
will then prompt you to change code.
Using the numbered buttons on the
remote control, enter the access code
of your choice. Enter the code a second
time to confirm it. Once the new code is
confirmed, the AutoLock menu will
appear. You can proceed to access the
functions available in the menu.
If you do not wish to access the other
fuctions, press the STATUS/EXIT
button to remove the menu from the
screen.
7
8
Remember that 0711 is the default
AutoLockTM code. If your access code has
been changed by someone other than you (a
child, for example) or you have forgotten the
code, you can always get in by inputting the
default code.
HELPFUL HINT
NOTE TO PARENTS: It isn t possible for
your child to unblock a channel without know-
ing your access code or changing it to a new
one. If your code has been changed without
your knowledge, then you will become aware
that blocked channels may have been viewed.
Features
Timer É
Autolock É
Contrast + É
Features
Timer ÉAccess Code
Autolock
Contrast + É
Incorrect
Confirmed
AutoLock
Block Channel On
Lock HD É
Change Code É
Clear All É
Block All É
Movie Rating É
ÑÉ
Features
Timer ÉChange Code
Autolock
Contrast + É
TV Menu
Picture Timer
Sound Autolock
Features Contrast +
Install
Mode
Features
Timer ÉConfirm Code
Autolock
Contrast + É
ÑÉ
Features
Timer ÉConfirm Code
Autolock
Contrast + É
ÑÉ
x x x x
1
2
4
3
5
8
6
7
ÑÉ
— — — —
ÑÉ
— — — —
Active Control
Active Control
É
É
Active Control
É
É
Active Control
É
Active Control
É
É
Active Control
É
É
****

13
HOW TO BLOCK CHANNELS USING AUTOLOCK™
Remember that 0711 is the default AutoLockTM
code. If your access code has been changed
by someone other than you (a child, for exam-
ple) or you have forgotten the code, you can
always get in by inputting the default code.
HELPFUL HINT
After your personal access code has been
set (see the previous page), you are ready
to select the channels or inputs you want to
block out or censor.
1Press the MENU button on the
remote control to show the onscreen
menu.
2Press the CURSOR DOWN button
to highlight Features.
3Press the CURSOR RIGHT button
to display the Features menu.
4Press the CURSOR DOWN button
to highlight AutoLock™.
5Press the CURSOR RIGHT button
again display the Access Code menu
prompt.
6Enter your four-digit ACCESS
CODE. Correct will flash very briefly
and the AutoLock™will be accessible.
7You can choose to block individual
channels or all channels at the same
time. For individual channels, press the
CURSOR RIGHT to enter the Lock
Channel menu.
8Using the numbered buttons or the
CH+ or CH- buttons enter the chan-
nel you wish to lock.
Repeat step 8 for any channels you want to
lock.
9To block all channels, press the CUR-
SOR DOWN button until Block All
is selected.
Press the CURSOR RIGHT button to
select On to activate the blocking of all
channels. To deactivate the blocking of
all channels, select Off.
Press the STATUS/EXIT button to
remove the menu from the screen.
10
AutoLock
Block Channel Off
Lock HD
É
Change Code É
Clear All
É
Block All É
Movie Rating É
AutoLock
Block Channel
 
On
Lock HD
É
Change Code É
Clear All
É
Block All É
Movie Rating É
Channel 2
Channel Blocking
Access Code
– – – –
ÑÉ
TV Menu
Picture
•Timer
Sound •Autolock
Features •Contrast +
Install
Mode
Features
Timer
É
Autolock É
Contrast + É
Features
Timer
É Access Code
Autolock
Contrast +
É
Features
Timer
É Access Code
Autolock
Contrast +
É
Correct
11
NOTE TO PARENTS: It isn t possible for
your child to unblock a channel without knowing
your access code or changing it to a new one. If
your code has been changed without your
knowledge, then you will become aware that
blocked channels may have been viewed. If a channel is blocked by the
Block Channel or Block All
option, the TV will display the
above screen. To watch the chan-
nel, enter your access code or you
can change the Block Channel
option back to Off.
1
2
4
3
5
11
68
7
10
9
 – – – – 
ÑÉ
ÑÉ
Active Control
Active Control É
Active Control É
É
Active Control É
É
****

9
1
6
3
5
8
2
4
7
14
HOW TO LOCK A HD (HIGH DEFINITION) CHANNEL IN TV MODE
You can also lock the HD (High Definition)
channel while in TV Mode using the
AutoLock™feature.
1Press the MENU button on the
remote control to show the onscreen
menu.
2Press the CURSOR DOWN button to
highlight Features.
3Press the CURSOR RIGHT button
to display the Features menu.
4Press the CURSOR DOWN button to
select the AutoLock™control.
5Press the CURSOR RIGHT button
again to highlight Access Code.
6Enter your four-digit Access Code,
“Correct will briefly appear on the
screen and the AutoLock menu will be
accessible.
7Press the CURSOR DOWN button to
select Lock HD.
8Press the CURSOR RIGHT button
to select On to activate the blocking of
the HD channel.
9Press the STATUS/EXIT button to
remove the menu from the screen.
Channel 2
Channel Blocking
Access Code
– – – –
ÑÉ
TV Menu
Picture Timer
Sound Autolock
Features Contrast +
Install
Mode
If a channel is blocked by the Block Channel or Block
All option, the TV will display the screen shown above.
To watch the selected blocked channel or all the
blocked channels, enter your Access Code or change
the Block Channel or Block All option to Off.
Remember that 0711 is the default
AutoLockTM code. If your access code has
been changed by someone other than you
(a child, for example) or you have forgot-
ten the code, you can always get in by
inputting the default code.
HELPFUL HINT
Features
Timer
É
Autolock É
Contrast + É
Features
Timer ÉAccess Code
Autolock
Contrast + É
ÑÉ
– – – –
Features
Timer ÉAccess Code
Autolock
Contrast + É
Correct
ÑÉ
AutoLock
Block Channel
Off
Lock HD
É
Change Code É
Clear All
É
Block All É
Movie Rating É
ÑÉ
AutoLock
Block Channel
On
Lock HD
É
Change Code É
Clear All
É
Block All É
Movie Rating É
ÑÉ
* * * *
Active Control
Active Control É
Active Control É
É
Active Control É
É

15
HOW TO CLEAR ALL LOCKED CHANNELS AT THE SAME TIME
Various onscreen messages will appear
when someone tries to view blocked pro-
gramming. The message is determined by how
the current programming is blocked. You may
view the blocked programming and turn OFF
the AutoLock™feature by using the Clear All
control or by entering your access code.
1Press the MENU button on the
remote control to show the onscreen
menu.
2Press the CURSOR DOWN button to
highlight Features.
3Press the CURSOR RIGHT button
to display the Features menu.
4Press the CURSOR DOWN button to
select the AutoLock™control.
5Press the CURSOR RIGHT button
again to highlight Access Code.
6Enter your four-digit Access Code,
“Correct will briefly appear on the
screen and the AutoLock menu will be
accessible.
7Press the CURSOR RIGHT button
to enter the AutoLock menu.
8Press the CURSOR DOWN button to
select Clear All. Clear? will appear on
the screen.
9Press the CURSOR RIGHT button
to activate the clearing of all channels.
Press the STATUS/EXIT button to
remove the menu from the screen.
10
TV Menu
Picture Timer
Sound Autolock
Features Contrast +
Install
Mode
If you tune to a specific channel that has
been blocked by Block Channel or any of
the AutoLock™Rating options, simply
enter your four-digit access code to view
the channel.
NOTE : This will unblock ALL channels
until the TV is shut OFF. When powered
back ON, all previously blocked channels
will be blocked again.
HELPFUL HINT
1
2
4
3
5
10
8
7
9
6
Features
Timer
É
Autolock É
Contrast + É
Features
Timer ÉAccess Code
Autolock
Contrast + É
ÑÉ
– – – –
Features
Timer ÉAccess Code
Autolock
Contrast + É
Correct
ÑÉ
AutoLock
Block Channel
Clear?
Lock HD
É
Change Code É
Clear All
É
Block All É
Movie Rating É
ÑÉ
AutoLock
Block Channel
Cleared
Lock HD
É
Change Code É
Clear All
É
Block All É
Movie Rating É
ÑÉ
Active Control
Active Control É
Active Control É
É
Active Control É
É
****

AutoLock
Block Channel
Lock HD
É •G
Change Code É •PG-13
Clear All
É •PG
Block All É •NC-17
Movie Rating É
É •R
16
BLOCKING PROGRAMS BASED ON MOVIE RATINGS
After your personal access code has been
set, you can select specific movie ratings
that you want to censor.
1Press the MENU button on the
remote control to show the onscreen
menu.
2Press the CURSOR DOWN button
to highlight Features.
3Press the CURSOR RIGHT button
to display the Features menu.
4Press the CURSOR DOWN button to
highlight the AutoLock™control.
5Press the CURSOR RIGHT button
again to highlight Access Code.
6Enter your four-digit Access Code.
Correct will flash very briefly and the
menu will move to the left with the
AutoLock menu now accessible.
7Press the CURSOR RIGHT button
to display the AutoLock menu.
8Press the CURSOR DOWN repeated-
ly until Movie Rating is highlighted.
9Press the CURSOR RIGHT button
and the Rating menu shifts to the left
with Ghighlighted.
Press the CURSOR UP or DOWN
buttons to highlight each rating you
want.
Press the CURSOR RIGHT button
to turn the rating ON or OFF. Turning
the rating ON will block programs with
that rating from being seen.
Press the STATUS/EXIT button to
remove the menu from the screen.
10
11
12
Movie Rating
GOff
PG
É
PG-13
É
R
É
NC-17
É
X
É
ÑÉ
1
2
4
3
5
12
8
7
10
9
11
6
TV Menu
Picture Timer
Sound Autolock
Features Contrast +
Install
Mode
Features
Timer
É
Autolock É
Contrast + É
Features
Timer ÉAccess Code
Autolock
Contrast + É
ÑÉ
– – – –
Features
Timer ÉAccess Code
Autolock
Contrast + É
Correct
****
ÑÉ
É
▼
Active Control
Active Control É
Active Control É
É
Active Control É
É

17
BLOCKING PROGRAMS BASED ON TV RATINGS
You can select specific TV ratings that you
want to censor by following these steps.
1Press the MENU button on the
remote control to show the onscreen
menu.
2Press the CURSOR DOWN button
to highlight Features.
3Press the CURSOR RIGHT button
to display the Features menu.
4Press the CURSOR DOWN button to
highlight the AutoLock™control.
5Press the CURSOR RIGHT button
again to highlight Access Code.
6Enter your four-digit Access Code.
Correct will flash very briefly and the
menu will move to the left with the
AutoLock menu now accessible.
7Press the CURSOR RIGHT button
to display the AutoLock menu.
8Press the CURSOR DOWN button
repeatedly until TV Rating is high-
lighted.
9Press the CURSOR RIGHT button
to enter the TV RATING menu.
Press the CURSOR UP or DOWN to
select a desired rating (TV-Y, TV-Y7,
TV-G, TV-PG, TV-14, or TV-MA).
Press the CURSOR RIGHT or LEFT
to turn the block on the rating On or
Off.
NOTE: More specific subratings (for violence,
sexual content, dialogue, or fantasy violence)
are available for TV-Y7, TV-PG, TV-14, and
TV-MA. (Refer to page 11 for definitions.)
To access these subratings, with the
main rating selected, press the CUR
SOR RIGHT. Then, repeat steps 10-
11 to turn the sub-ratings ON or
OFF.
Press the STATUS/EXIT button to
remove the menu from the screen.
10
12
11
13
TV Rating
TV - Y On
TV - Y7
É
TV - G
É
TV - PG
É
TV - 14
É
ÑÉ
1
2
4
3
5
13
8
7
10
9
11
6
TV Menu
Picture Timer
Sound Autolock
Features Contrast +
Install
Mode
Features
Timer
É
Autolock É
Contrast + É
Features
Timer ÉAccess Code
Autolock
Contrast + É
ÑÉ
– – – –
Features
Timer ÉAccess Code
Autolock
Contrast + É
Correct
ÑÉ
AutoLock
TV Rating
Block Options
É •TV - Y
•TV - G
É •TV - Y7
•TV - 14
•TV - PG
É
▼
TV Rating
TV - Y
É • Block All
TV - Y7
É •V
TV - G
É •S
TV - PG
É •L
TV - 14
É •D
TV PG
Block All ÑOn É
V É
S É
L É
D É
▼
É
Active Control
Active Control É
Active Control É
Active Control É
É
É
12
****

18
OTHER AUTOLOCK™BLOCKING OPTIONS
The AutoLock™control offers the viewer other blocking options as well. With
Block Options, the censoring can be turned
On or Off.
1Press the MENU/SELECT button on
the remote control to show the
onscreen menu.
2Press the CURSOR UP or CURSOR
DOWN button to highlight Features.
3Press the CURSOR RIGHT button
to display the Features menu.
4Press the CURSOR DOWN button to
highlight the AutoLock™control.
5Press the CURSOR RIGHT button
again to highlight Access Code.
6Enter your four-digit Access Code.
Correct will flash very briefly and the
menu will move to the left with the
AutoLock menu now accessible.
7Press the CURSOR RIGHT button
to display the AutoLock menu.
8Press the CURSOR DOWN button
repeatedly until Block Options is high-
lighted.
9Press the CURSOR RIGHT button
to enter the Block Options menu.
Press the CURSOR UP or DOWN
buttons to select the desired block
option.
Blocking: Might be called the master
switch for AutoLock™. When On,
ALL blocking/censoring will take place.
When Off, ALL blocking is disabled.
Block Unrated: ALL unrated programs
based on the Movie Ratings or
Parental (TV) Guidelines can be
blocked if this feature is set to On and
the Blocking feature is set to OFF.
No Rating: ALL programming with
NO content advisory data can be
blocked if set to On and the Blocking
feature is set to OFF.
Press the CURSOR RIGHT or
LEFT to toggle BLOCKING ON or
OFF.
Press the STATUS/EXIT button to
remove the menu from the screen.
Remember, when the BLOCKING control is
OFF, the blocking or censoring of programs is
disabled. When the BLOCKING control is
ON, blocking will occur according to the set-
tings you have chosen.
HELPFUL HINT
10
11
12
Block Options
Unrated
On
No Rating
É
Blocking É
ÑÉ
1
2
4
3
5
12
8
7
10
9
11
6
TV Menu
Picture Timer
Sound Autolock
Features Contrast +
Install
Mode
Features
Timer
É
Autolock É
Contrast + É
Features
Timer ÉAccess Code
Autolock
Contrast + É
ÑÉ
– – – –
Features
Timer ÉAccess Code
Autolock
Contrast + É
Correct
ÑÉ
AutoLock
TV Rating
Block Options
É •TV - Y
•TV - G
É •TV - Y7
•TV - 14
•TV - PG
▼
AutoLock
TV Rating
Block Options
É • Unrated
• Blocking
É • No Rating
É
Block Options
Unrated
No Rating
É
Blocking É
É
Ñ
On
Block Options
Unrated
No Rating
É
Blocking
É
É
Ñ
On
▼
É
Active Control
Active Control É
Active Control É
É
Active Control É
É
****

AutoLock Disabled
19
USING THE AUTOLOCK™REVIEW SCREEN
To remind you wich rating you have locked and which Block Options you have selected,
a review screen is available to review your
AutoLockTM settings. To access this screen follow
the steps below.
1Press the STATUS/EXIT button on the
remote control TWICE. Your
AutoLock™settings will appear on the
screen.
NOTE: If you have blocked specific subratings,
such as V for violence in the TV-PG category,
these blocked subratings will not appear in the
review. The subratings however are still blocked
according to your selections.
2After a few seconds, the settings will
leave the screen automatically, or you can
press the STATUS/EXIT button a third
time to remove them from the screen.
The AutoLock™status screen will only
appear if the Block option is set to On. See
previous page for details.
AutoLock is set to Off by default.
HELPFUL HINT
This display will appear after Step One
(above) is completed if the AutoLock™
Block Option is set to On.
This display will appear after Step One
(above) is completed if the AutoLock™
Block Option is set to Off.
1
2
TV Rating
TV-7 Off
TV - Y7 On
TV - G On
TV - PG On
TV - 14 On
MA On
Unrated On
No Rating On
Movie Rating
G Off
PG On
PG - 13 On
NC -
17
Off
X Off
ROn
TV Rating
TV-7 Off
TV - Y7 On
TV - G On
TV - PG On
TV - 14 On
MA On
Unrated On
No Rating On
Movie Rating
G Off
PG On
PG -
13 On
NC -
17
Off
X Off
ROn

20
HOW TO USE THE CONTRAST+ CONTROL
Tne Contrast + function helps to sharpen the pic-
ture quality. The black portions of the picture
become richer in darkness and the white portions
become brighter.
1Press the MENU button on the remote control
to show the on-screen menu.
2Press the CURSOR DOWN to highlight
Features.
3Press the CURSOR RIGHT to access the
Features menu.
4Press the CURSOR DOWN button until the
Contrast + control is highlighted.
5Press the CURSOR RIGHT or LEFT to tog-
gle the On or Off option.
6Press the STATUS/EXIT button to remove
the menu from the screen.
1
2
3
65
4
5
HOW TO USE THE MODE CONTROL
Tne Mode Control will allow you to use the TV into
the TV, FM, or VGA Modes. Depending on
how the TV will be used, these modes may have their
own onscreen menu controls to optimize capability
when used with computers, radios, or high-definition
receivers.
1Press the MENU button on the remote con-
trol to show the onscreen menu.
2Press the CURSOR UP or CURSOR DOWN
button to highlight Mode.
3Press the CURSOR RIGHT to access the
Mode menu.
4Press the CURSOR UP or CURSOR DOWN
button until the desired Mode ( FM Radio.
VGA or HD) is highlighted.
5After you have highlighted the desired mode
is selected, press the CURSOR RIGHT but-
ton to enter the selected Mode.
NOTE: You can also press the dedicated button on the
remote control to change the Mode.
TV Menu
Picture Brightness
Sound Color
Features Picture
Install Sharpness
Mode Tint
TV Menu
Picture
•Timer
Sound •Autolock
Features •Contrast +
Install
Mode
Features
Timer Time
Autolock
É Start Time
Contrast + É Stop Time
Program No.
Activate
É
Features
Timer
Autolock
É
Contrast + Off
É
É
Ñ
Features
Timer
Autolock
É
Contrast + On
É
É
Ñ
TV Menu
Picture TV
Sound FM Radio
Features PC
Install
Mode
HD
TV Menu
Picture TV
Sound FM Radio É
Features PC
Install
Mode
HD
TV Menu
Picture TV
Sound FM Radio
Features PC É
Install
Mode
HD
TV Menu
Picture TV
Sound FM Radio
Features PC
É
Install
Mode
HD
1
2
3
5
4
2
4
5
Active Control
Active Control É
Active Control
É
•
É
É
Active Control
É
É