Philips 32PFL7332D/37 User manual

User Manual
Manuel de I'utilisateur
Guia del usuario
32PFL7332D/37
37PFL7332D/37
42PFL7332D/37
Thank )
help fast?
Readyour Quick Use Guide and/or
Owner's Manual first for quick tips
that make using your Philipsproduct
more enjoyable.
If you have read your instructions
and still need assistance,
you may accessour online help at
www.philips.comlusasupport
or call
1-888-PHILIPS (744-5477)
while with your product
(and Model I Serial number)
J
Quick Use
v0tre c0nfiance.
d'une
rapide?
Les Guide d'u_ilisotion rapide et
Manuel de I'utilisateur regorgent
d'astuces destin6es _simplifier
I'utilisa_ion de vatre produit Philips.
Tautefais, si vous ne parvenez
pos _r6soudre va_re prabl_me,
vaus pouvez acc6der 6
notre aide en ligne _I'odresse
www.philips.comlusasupport
ou formez le
1-800-661-6162 (Francophone)
1-888-PHILIPS (744-5477)
(English speaking)
Veillez _avoir votre produit
porthe de main
(et model /serial nombre) j
Guide
GraciasparescogerPhilips
ayuda
inmediata?
Lea primero la duia de us0 r_pido o el
Manual de! usuario, en donde encon-
trar_
consejos que le ayudar_n a disfrutar
plenamente de su producto Philips.
Si despu6s de leer!o a_n necesita ayuda,
consulte nuestra servJciode
asistencia en linea en
www.philips.com/usasupport
o Ilame al tel6fono
1-888-PHILIPS (744-5477)
y tenga a mano el producto
(y n(_mero de modelo /serie)
_,. j
"1
Insrde.
Guide d'usage Rapide Incluse!
Guia de Uso R6pido Incluida!
For Customer Use /A I'usage du client /
Para Uso del Cliente
AE: Enter below the Serial No. which is located on the rear
of the cabinet. Retain this information for future reference.
FR: Entrez ci-dessous le num6ro de s6rie qui se trouve
I'arri6re du boo'tier du dispositif. Conservez ces informations
pour r6f6rence ult6rieure.
ES: Escriba a continuaci6n el N ° de serie, el cual se
encuencra en la parte posterior del gabinete. Guarde esta
informaci6n para referencia fucura.
Model /ModUle /Modelo :
Serial /S6rie /Serie:
M

32PFL7332D 37PFL.7332D M6 (t 8turn) ×L
42PFI..7332D M5 (2Smm) x 2 _
J
/
O o
INo wall mounting bracket Provided:
ontage pour tour n0n inclus,
_ared no inc uido. I

How to make the optimal connection (These cables are not provided with the set.)
Comment r_aliser une bonne connexion (Cesc_b_es0e,o0tpa,fo0r0_savecvotre_v_se0_.)
C6mo realizar [a mejor conexi6n (E,_oscables0o,e p_opo_dona0co°elapa_a_o.)

AE: Set-Top Box to iV
FR: B_tier de d_codage
vers t_l_viseur
ES: De la caja superior
ocaja de cable al TV
HDMI
OR/OU/O
RF
f Cable Signal IN
from Cable Company
Signalde t_l_distribution
d'entr_e IN du service du cgble,
Entradade se£,alde cable
desde la compa_iade cable
Backof Cable Box
Arriere du bo_derde conn_xion
Parte posterior de la cajade cable
T_l_wseur HDNI Input
Entree HDMI
Tv Entrada HDMI
Details refer to page 22.
/D_tails. consuJtez le page 22.
/Para detales_ consulte la pag. 22.
AE: Set-Top Box to TV
FR: BcH_tier de d_codage
vers t616vJseur
ES: De Ja caja superior
o caja de cable al TV
Component Video Input
IEntr_e video composant
/Entrada de video
componente
Cable SignalIN
from Cable Company
Signalde t_l_distribution
d'entr_e IN du service du c£ble,
Entrada de seSalde cable
desde lacompaSiade cable
®
s.wke
= ==' 6 o_@D
Back of Cable Box
Arriere du boider de connaxion
Par_eposterior de la ca_ade cable
TV
T_l_viseur
TV
Details refer to 0age 22.
/D_taiJs, consultez le page 22.
IPara detalles, consulte la pag. 22.

DVD vers le t_l_viseur
reproa.ctorograbaaor
de DVD al TV
DetaiJs refer to page 23.
/D_tails, consultez le page 23.
!Para detalles, consulte la pag. 23.
HDMI ®
TOTV
AE: Progressive Scan DVD
Player/Recorder to TV
FR: Lecteur DVD ou Enregistreur
vers le t_l_viseur
ES: Del reproductor o grabador
de DVD al TV
Component Video Input
/Entree video composant
IEntrada de video
componente
TV
T_l_viseur
TV
-- _ Add for DVD Recording
TOTV (_
iBack of DVD PlayerlRecorder ---- I_I
Remote Control Source Button Arri_re du lecteur/enregistreur DVD ] [
..... Bouton Source Parte posterior del reproductor/grabador H
lelecommanae de DVD _ Y
Details refer to page 23.
ID_tails, consuJtez le page 23.
/Para detalles, consuJte la pag. 23.

AE: DVD Player/Recorder/VCR
to TV
FR: Lecteu r DVD/En registreu r
DVD/Magn_toscope vers le
t_l_viseur
ES: Del reproductor/grabador de
DVD/VCR al TV
Composite Audio-video
/Audio-Video composite
/Audio-Video compuesto Remote Control
T_l_commande
Control remoto
Details refer to page 23
BackofTV [
Arri_re du
T_l_viseur
Parteposterior
delTV
-_ Source Button
Bouton Source
Bot6n Source
Add for DVD
Recording
Back of DVD/VC R
Arri_re du DVDi
Mag n_toscope
Parte _osterior del
DVD/VCR
TOTV
ANTENNA_
/CABLE_
/D_tails_ consultez le page 23.
/Para detalles, consulte la pag. 23.
AE: Video Camera/Games
Console to TV I
FR,Ca rav,d o/Co?sole IffiJlil
deje.. verst l ,se.r I IIli Ill
Consola de juegos al_
"IV SideJack Panei_
/Tableau de connexions
du t_l_viseur
/Panel de enchufes del
TV
Composite Audio-video
/Audio-Video composite
!Audio-Video compuesto
Details refer to page 24.
ID_tails, consultez le page 24.
!Para detalles, consulte la pag. 24.
AUDIO
RIGHT LEF]
,.. j
Video Camera Jack Panel
/Panneau de connexions
de la camera video
/Panel de enchufes (
c_mara de video
/T(_l(_commande Bouton Source
/Control remoto Bot6n Source
FpOrFirst time Installation, refer to page _!headphone details, refer to,page 24.
our I Installation pour la premiere lois, consultez le page 5. Pour des d6tails d USB/Audifono, consultez le page 24.
Para Instalaci6n o_L£E_rimera vez, yea _L&Fz5. Para detalles de USB/Audlfono, consulte la apa_ 24.
J

Contents
AGuide to Digital TV ........................................................................ 2
Preparation ........................................................................................... 2
First time installation ......................................................................... 5
Use of the remote control ................................................................ 6
Control Buttons on the TV .............................................................. 7
TV settings ............................................................................................ 8
Settings assistant ................................................................................... 8
Standard settings ................................................................................... 8
To use the menus ................................................................................ 9
Introduction .......................................................................................... 9
How to navigate through the TV menus ............................................ 9
Demo ...................................................................................................... 9
Picture menu ..................................................................... 10
Contrast ....................................................................................... 10
Brightness ..................................................................................... 10
Color ............................................................................................ 10
Tint ............................................................................................... 10
Sharpness ..................................................................................... 10
Color temperature ...................................................................... 10
Custom color temperature ......................................................... 10
Pixel Plus ...................................................................................... 10
Dynamic contrast ......................................................................... 11
DNR (Digital Noise Reduction) .................................................. 11
MPEG artifact reduction .............................................................. 11
Color enhancement ..................................................................... 11
Active Control ............................................................................. 11
Picture format .............................................................................. 11
Sound menu ....................................................................... 12.
Equalizer ...................................................................................... 12
Volume ........................................................................................ 12
Balance ........................................................................................ 12
Digital Audio Language ............................................................... 1:2
Alternate audio ........................................................................... 12
Mona/Stereo ............................................................................... 12
Sound mode ................................................................................ 12
Headphone volume .................................................................... 12
AVL (Automatic Volume Leveler) ............................................. 12
Delta volume ............................................................................... 12
Auto surround ............................................................................ 12
Ambilight menu ................................................................. 13
Ambilight ..................................................................................... 13
Brightness .................................................................................... 13
Mode ........................................................................................... 13
Color ........................................................................................... 13
Custom Color ............................................................................ 13
Separation ................................................................................... 13
Color Boost ................................................................................ 13
Balance ........................................................................................ 14
Features menu ................................................................... 14
-Closed captions .......................................................................... 14
- Caption service ........................................................................... 14
- Digital caption service ................................................................ 14
- Digital caption options ............................................................... 15
- Sleepdmer ................................................................................... 15
- Favorite List ................................................................................ 15
Child lock menu ................................................................................. 15
- Lock after .................................................................................. 16
-Channel lock ............................................................................... 16
- TV ratings loci<............................................................................ 16
- Movie ratings lock ...................................................................... 17
-Region ratings loci< ..................................................................... 17
-Set/Change PIN ........................................................................... 17
- On timer ..................................................................................... 18
Installation menu ............................................................................... 18
Select the menu language ................................................................. 18
Channel menu .................................................................................... 18
Store TV channels ............................................................................. 18
Installation update .............................................................................. I 9
Weak channel installation ................................................................. 19
Installation mode ............................................................................... 19
Uninstall channels ............................................................................ 19
Preferences menu .............................................................. 19
- Location ........................................................................................ 19
- OSD .............................................................................................. 20
-Show emergency alerts (EAS) ..................................................... 20
-Download rating table ................................................................. 2.0
Connections ....................................................................... 21
Clock .................................................................................. 21
- Auto clock mode ......................................................................... 21
- Auto clock channel ...................................................................... 21
- Time - Day ................................................................................... 21
- Time zone .................................................................................... 21
- Daylight saving ............................................................................. 21
Reset AV settings ............................................................... 22
Software upgrade ............................................................... 22
Connect Accessory Devices ........................................................... 22
Set Top Box to TV ............................................................................ 22
Progressive Scan DVD Player/Recorder to TV ............................ 2_3
DVD PlayeHDVD RecorderNCR to TV ......................................... 23
Video Camera/Games Console to TV ............................................. 24
Side connections - USB/Headphone .......................................... 24
Digital Surround receiver ............................................................ 24
Multimedia browser ......................................................................... 25
Multimedia Browser menu ................................................................ 25
Record with your recorder ............................................................. 26
Record a TV program ........................................................................ 2.6
To select connected devices .......................................................... 26
Troubleshooting Tips ....................................................................... 27
Tips ........................................................................................................ 28
Glossary ................................................................................................ 29
Specifications ...................................................................................... 30
Annex 1 - Philips TV software upgrade with portable memory.31
Annex 2-Philips TV Slideshow Format with background music...... 33
Annex 3-Philips TV USB ................................................................... 35
_End of life directives
Philipsis paying alat of attentian to produce environmentally friendly products in green _ocolareas Yournew T¢
contains materials which can be recycled and reused. At the end of its life specialized camponies can dismantle the
discarded 7Vto cancentmte tf_ereusable rootenals and ta minimize the amount of materials to be disposed off
Please ensure you dispose off your old TVaccording to local regulations,
_'_

Guidtooigit ,l
What is Digital Television (DTV)?
Digital Television (DTV) is relatively new type of broadcasting that promises to transform television viewing into a whole new
experience. Digital technolo£i is used to capture images and sound to deliver a better picture quality. DTV technology is also
capable of multicasting and interactive capabilities.
There are many levels of digital television quality. The most common are:
Standard Definition TV (SDTV)
SDTV isthe basic level of quality display and resolution for both analog and digital. Transmission of SDTV can be in the traditional
(4:3) or widescreen (I 6:9) format.
Enhanced Definition TV (EDTV)
EDTV is better in picture quality than analog television. The formats for EDTV are 480p widescreen (I 6:9) or traditional (4:3).
EDTV is in the middle range quality between SDTV and HDTV.
High Definition TV (I-IDTV)
HDTV has the highest quality for digital broadcast formats. Its resolution is widescreen format (I6:9). Combined with digitally
enhanced sound technology, HDTV sets new standards for sound and picture quality in television.
DTV is by far a more flexible and efficient techno]o£i than the analog broadcast system. Analog broadcasts can only provide one
program at atime. Digital television can broadcast a high definition program or more than one standard definition program at the
same time. This is often referred to as "muJticasting". Digital television can also give you interactive video and data services through
a single digital channel.
_IIIPreparadon _
©©Note : Use only a soft cloth to clean the glossy front of
the TV.
Do not insert the power plug in a wall socket before all connections
are made,
Place the TV on a solid surface or place the TV on the supplied stand. For
the mounting instructions of the stand, see the Cover Page.
For ventilation, leave at least 4" to 6" free all around the TV. Do not
place the TV on a carpet. To prevent any unsafe situations, no naked flame
sources, such as lighted candles, should be placed in the vicinity.
Avoid heat, direct sunlight and exposure to rain or water. The equipment
shall not be exposed to dripping or splashing.
Mounting the TV on the wall
This TV is compatible with the VESA wall mounting standard. Please
contact your local electronics retailer for a VESA compliant bracket to wall
mount this TV.

CABLE
.-e
7ga"rL
-IF
BLE 7srz-lr-
lOUTPUT
IN OUT
Set-Top Box
Set-Top _ox
OBasic connections to the TV
Your integrated digital TV automatically decodes and displays the four basic DTV
picture resolution standards.
-SDTV (Standard Definition TV) are broadcast as 480i (480-line interlaced) or
480p (480dine progressive scan) video.
-HDTV (High-Definition TV) are broadcast either in the 1080i or 720p formats,
always with a widescreen picture.
Note: Progressive scan video (p) is more like that you see in a movie theaten Images are
much morn distinct and free of flicker, and motion is smoothen
Next to analog NTSC broadcast reception, your TV has an integrated High
Definition TV tuner which receives, decodes and displays terrestrial ATSC and
unscrambled cable (QAM) signals.
HDTV quality is only reproduced when a broadcaster or cable provider broadcasts
HDTV signals.
There are 2 ways to get HDTV content:
- via cable,
-via antenna.
Note; This drawing is used wherever you can connect cable or antenna.
-Cable TV
Connect the cable TV signal to the CABLE/ANTENNA "/5 ll'=lr= jack at the bottom
of the TV. See page 18 for details on using Autoprogram to store channels in the
TV's memory.
Note: this connection will supply stereo sound to the TV if it is being broadcast by the
station you are_watching,
-Cable box with RF IN/OUT
" Connect the incoming cable TV signal to the cable IN jack C) on the back of
the cable box.
. Connect a coaxial cable (not supplied) from the TO TV jack on the back of the
cable box to the CABLE/ANTENNA 75 n-r jack (_) at the bottom of the TV.
Note: Your cable box may have a different label _orthe TO TVjack, such as
OUTPUT or OUT
" Set the OUTPUT CH switch (_) of the cable box to CH 3 or 4(whichever is
correct for your cable box), then tune the TV to the corresponding channel.
Once tuned, change channels at the cable box, not the TV.
Note: This connection w#l not supply stereo sound to the TK The reason is that the RF
output on a cable box _labeled TO TV, OUT or OUTPUT for exampb _will not send a
stereo signal to the tuner (VHF/UHF) input on a TK
=Cable box with AIM outputs
•Connect the incoming cable TV signal (_ to a signal splitter (not supplied).
The signal splitter enables you to avoid having to use the TO TV jack on the
back of the cable box. This jack will not supply stereo sound to the TV.
Note: Your cobb box may have adifferent label for the TO TVjack, such as
OUTPUT or OUT
" Connect a coaxial cable (not supplied) to a connector on the signal splitter and
to the CABLE/ANTENNA 75 n=l_ jack (_) on the TV.
. Connect another coaxial cable (not supplied) to a connector on the signal
splitter and to the cable IN jack C) on the back of the cable box.
•Connect A/V cables (not supplied) to the VIDEO and AUDIO Land R outputs
on the back of the cable box and to the AV2 video (labeled VIDEO) and
AUDIO (labeled Land R) jacks (_ on the back of the TV.
•To view programs from your cable box, first press the SOURCE button on the
remote control
•Pressthe cursor down or up buttons untilthe AV2 signalsource isselecte&
•Pressthe OK button to confirm your selection.The AV2 inputsource
becomes currentfor the viewing ofcableTV programs through your cablebox.
Note; ff your cable box Audio/VMeo outputs will not supply wdeo and stereo au@o to
the T_4you will need to make the connection shown above in the exampb "Cable box
with RF INIOUT".

CABLE
"lr-
@
0
- Cable box with S-Video, component video (YPbPr) or HDMI connectors
See Connect Accessory Devices, p. 22.
-Antenna
Via antenna you can watch whatever DTV programs being broadcast in your
area for free.
If you're not sure what HDTV programming is available in your area, contact
your local content provider or your local electronics store retailer.
Broadcasters are in the middle of a transition from analog to digital TV. This
means that a given broadcaster will have two channels on the air, one analog and
one digital.
Connect the incoming antenna signal to the CABLE/ANTENNA 75 n
=IF" jack at the bottom of the TV. See page 18 for details on using Autoprogram
to store channels in the TV's memory.
Note: This connection will supply stereo sound to the TV if it is being broadcast by the
station you are watching,
Direct Broadcast Satellite (DBS)
Satellite systems offer many of the same premium channels as cable systems, and
often at a lower price. To get these channels, you'll need to install a small dish
antenna outside.
There are 2 main DBS systems: DirecTV & DishNetwork. These systems require
separate, proprietary set top receiver boxes to decode their signals and send
them to your digital TV set. These boxes may include a digital TV tuner for off-
air DTV broadcasts.
Satellite broadcasters also provide major local channels, depending on the
market in which you live.
DBS also provides service in areas not covered by cable because they are in
rural areas or other areas not passed by a cable line.
DBS also allows you to watch pay-per-view events.
Before installing your TV or before hanging it on the wall, connect all your
accessory devices. See p. 22.
Refer to the bottom of the set for the correct operation voltage. Insert the power
cord in the wall socket,
Consult your local dealer if your mains supply is different. To prevent damaging
the mains (AC) cord which could cause a fire or electric shock, do not place the
TV on the cord,
O Remote control:
Insert the 2 batteries supplied (Type R6-1,SV), Be sure the (+) and (-) ends of the
batteries line up correctly (inside of case is marked.)
The batteries supplied do not contain the heavy metals mercury and cadmium, Please
check on how to dispose of exhausted batteries according to local regulations.
0 Turn the TV on:
Press the power switch I0 at the side of the TV. You may also press +CH- or
POWER button on the remote control.
The TV can take up to 15 seconds to power up.
A blue indicator light on the front of the TV lights up.
4

(ii First time instanationo, , "
Note: The first time (and only the _rst time) you turn on your set you see an installation introduction screen, The }nstallation procedure consists of a
ser_esof screens that guide you through the process.
OAfter an introduction screen, you are asked to select a language of the TV'son-screen-menus. (The text of the header and the infb on screen
continuously change language.)
Pressthe cursor up/clown to highlight your language.
Pressthe OK button,
Follow the on screen instructions to proceed.
Part 1: TV installation
(Please skip this section if you have no cable connected to the Antenna input of the TV, and continue with Part 2.)
Note -The TV will take approximately I0-15 seconds to start up.
Select the desired Language and press the green button "Next".
Select Cable or Antenna in the Installation mode and press the green button "Next".
O Auto Installation may take 20 to 40 minutes depending on the number of channels that are transmitted by the cable provider or
broadcaster.
O When the TV is not receiving any signal from the antenna/cable, the message CHANNEL NOT AVAILABLE will appear on the TV
screen. When no transmission is received from the broadcaster, a BLANK SCREEN will appear on the TV screen.
Note - The TV will go on to standby after 10 minutes. Press the POWER button on the remote control to turn on the TV.
O You will not be able to receive pay channels when using direct antenna/cable connection to the television.
O When the Set-top box is connected to the television using coaxial cable, itis necessary to auto-program the television forthe single channel
(3 or 4) that the Set-top box outputs and change the channels at the Set-top Box (using the set-top remote control) to view the program.
Refer to the manual for more details.
Note - The newly installed channels maybe sorted in a different sequence on this TV. Use the CH +/- buttons to get to know the new
channel. You can also use the OK button to see the list of channels.
O When the Set-top box is connected to the television using one of the AV connections (AV 1/AV 2/HDMI 1/HDMI 2), select that input
source (using the Source button) to view the programs and change the channels at the Set-top Box (using the set-top box remote control) to
view the program.
Part 2: Settings assistant
By means of several split screens/full screens you are prompted to select your preferred picture and sound settings, to finally arrive at a complete
setting which satisfies you.
Press the green color button on your remote control to enter the Settings assistant menu.
Select your Location with the cursor up/clown and press the green color button.
If you choose Shop it will skip the Settings assistant. The TV parameters for Picture and Sound will then be set to predefined fixed settings.
Press the green color button again to proceed.
If you choose Home it will display the Settings assistant.
O Use the cursor left/right to each time select your preferred screen.
O Press the green color button to each time confirm your selection and to jump to the following screen.
The following items will be presented sequentially. In the header it is mentioned how many screens have been completed and how many
screens there are in total. The Settings assistant will step sequentially through the following settings: Picture, Sound and Ambilight.
O Press the green color button once to store all the settings and to return to the TV installation menu.
Note: When you skip or stop the Settings Assistant, then the Standartl settings
Philips selected for you will be chosen.
Press the red color button to finish the First time installation procedure and to display the first stored TV channel

_'_ Use of the remote control
Note; For most buttons pressing a button once will activate the function. Pressing a second time will de-activate Jr.
When a button enables multiple options, a small list will be shown. Pressrepeatedly to select the next Jtern Jn the list. The list will be removed automatically
after 6 seconds or press OK to rernove immediately.
/....................................................................................................................... •
L
POWER
Press to turn on/off the TV from or to
standby mode.
The TV is never powered off completely unless it is
physically unplugged,
\ ........ /
DEMO Demo menu on/off
See p. 9.
Color buttons
When functions attached to the color
buttons, the color buttons are shown on
screen,
OPTION
To select the Autio language, Closed
Captions, Picture format, Equalizer and
Clock.
i OK
- to activate a setting
- to display the list of channels stored
(according to the selection made in the
Installation mode (Antenna or Cable), p. 18.
- starts playing content in the Home
Multimedia Browser application, p. 2S.
MENU
Settings menu on/off, see p. 9.
Exit menu from sub-menu.
VOL (Volume)
Press + or - to adjust the volume.
MUTE
Turn off or on sound.
SOURCE
Press this button repeatedly to select the
source -AV |, AV 2, HDMI 1, HDMI 2,
SIDE or TV
when in TV mode, according to where you
connected the accessory devices (p. 22).
POWER
_ FAVORITES_ _ AMBILIGHT _
@@@@
DEMO
INF0
(Z) (Z) (Z)
PHILIPS
TELEV;S;ON
J
'i
Cursor buttons
Press the cursor buttons up/down, left/right to
navigate through the menus.
CN Channel selection
- To browse through the TV channels.
-To select between Antenna or Cable TV
channels, first make your selection in the
Settings menu, see, p. 18.
Note: You don't have to start the installation
again once you have searched _brand stored
the available TV channels.
PREV CN
Press to alternate between the currently
viewed channel and the previously viewed
channel.
!, Press the dot (.) for digital channels.
INFO
Display information: Press to display (when
available) information about the selected TV
channel and program or accessory device.
The quality and accuracy of the information on
the information banner are transmitted from
broadcasters. You may see a difference in
broadcast time if the broadcaster is from a
different time zone area.
Display clock: Select to activate/deactivate
the clock display on the screen.
To be continued.

C) C) C) C)
OP_ON I_FO
PHBIPS
TELEV:S:ON
// ......
FORMAT
[Press this button to summon a list of available display formats (depending on the receiving signal). This
lets you choose the display format of your preference.
[ Press this button repeatedly to select another picture format: Automatic, Super Zoom, 4:3, Movie
expand 14:9, Movie expand 16:9, Wide screen.
Automatic Super zoom 4:3 Mov_ expand 14:9
L-............---Z--T-_
ZY
Movie expand 16:9 Wide scan
Automatic makes the picture fill the screen as much as possible.
Super zoom removes the black bars on the sides of 4:3 programs with minimal distortion.
When in Movie expand 14:9, Movie expand 16:9 or Super zoom picture format, you can make subtitles
visible with the cursor up/down.
Note: With HD sources not dl semen fom'_ats will be avdoble,
AMBILIGHT
•ArnbiJight Press co switch Ambilight On or Off. For the Ambilight settings, see TV menus, Ambilight, p.13
• MODE Press this button repeatedly co toggle through the Ambilight modes.
FAVORITES
•ViEW To display a list of all channels marked as favorite (incL subchannels).
•/No function.
_iControl Buttons on the TV
Should your remote be lost or broken you can still change some of the basic
settings with the buttons on your TV.
Press the power switch (_ to switch the TV on.
Press:
. the + VOLUME -button to adjust the volume.
. the + CHANNEL - buttons to select the TV channels or sources.
The MENU button can be used to summon the Settings menu without the
remote control.
Use:
• the + VOLUME - buttons to select left/right menu items and the + CHANNEL -
buttons to select up/down menu items.
7

TV settings
Settings assistant
Each time you have made a selection, press the green color button to confirm
your selection.
O Select Settings assistant and press the cursor right.
Note: By means of several split screens/full screens you are prompted to
select your preferred picture, sound and ambilight settings to finally arrive
at a complete setting which satisfes you.
See First time installation, p, 5.
Press the green color button to return to the TV menu again,
TV settings Reset to standard
Reset to standard
This allows you to reset your settings for viewing and listening to predefined
factory settings.
Select Reset to standard and press the cursor right.
A menu appears which allows you to select one of the standard settings for
viewing and listening.
Current: shows your current settings for viewing and listening.
Natural : allows you to set your picture and sound settings to the
recommended standard values. In most cases this will give the
best balanced viewing experience.
Vivid :allows you to set your picture and sound settings to rich values,
making use of the TV capabilities to its full extend.
Subtle : allows you to set your picture and sound settings to the purest
representation of the original source content.
Press the green color button to store the selected setting.

use the menus ._,_)
How to navigate through the TV menu
The TV menu allows you to access and change settings and preferences.
Press the MENU button on the remote control to summon the TV menu.
-On the left panel the highlight can be set on a menu item with the cursor
up/down.
The right panel shows the content of the highlighted menu item in the left
panel,
Note: Sometimes not all the menu items are visible on the screen. Use the cursor
down to reveal all items.
-Use the cursor right to enter the right panel.
The content of the right panel is moved to the left panel and the right
panel shows the content of the newly highlighted item in the left panel,
Note: In some cases it _simportant that the picture can be watched while
adjusting the settings. This means that when the highlight is on the right side
panel, the other menu items hide away. When the cursor left is pressed again,
the hidden menu items re-appear and the highlight moves to the left panel.
Press the cursor left to go one menu level up again.
- Press the OK button on the highlighted item to activate and to dismiss the
menu.
- Press the MENU button again to exit the Settings menu.
Note: The menu is a/so dismissed by pressing one of the color buttons (if present)
refemng to certain actions which may be executed.
_i_ Demo
The Demo menu allows the user to get an idea of the features that are part of
the television.
O Select Demo in the Features menu and press the cursor right.
Highlight a desired demo with the cursor up/down,
Press OK to start playing the highlighted demo.
Press the red color button to stop the function.
Press the red color button again to exit the demo and to return to TV
mode.
Note: The selected demo is playecl once.
The demos require no user interaction except for starting the clemo.

_o Picture menu
TV m_nu I
TV settings Picture
Press the MENU button on the remote control to summon the TV menu, The TV
menu gives you an overview of the menus you can select.
Note: Depending on the input signal, one or more menu items may not be selectable.
Picture menu
Note: Some menu items are not available in case of HD sources.
O Press the cursor right to select Picture,
Press the cursor right again to enter the Picture menu.
Select the menu items with the cursor up/down.
0 Adjust the settings with the cursor lefJright or enter the list of submenu items
with the cursor right. Select a submenu item with the cursor up/down.
Contrast
Thiswilladjustthe intensityof brightpartsinthe picturebut keep the dark
partsunchanged,
Brightness
This will adjust the light output of the complete picture, which will mainly affect
the darker areas of the picture.
Coior
Thiswilladjustthe saturationJevelofthe coJorsto suityour persona]
preference.
Tint
Allows you to select the color mix (hue) of the picture,
Sharpness
This will adjust the sharpnessof fine details in the picture.
Co[or temperature
This will increase or decrease Warm (red) and Cool (blue) colors to suit
personal preferences.
Select Cool to give the white colors a blue tint, Normal to give the white
colors a neutral, Warm to give the white colors a red tint.
Custom color temperature (only when Color temperature is set to Custorn)
Fine tunes the white point (WP) and black level (BL) of the picture.
Select Custom color temperature and press the cursor right.
Use the cursor buttons to select and adjust the settings of:
R-WP: allows you to customize the color temperature by adjusting the red
whitepoint of the picture.
G-WP: allows you to customize the color temperature by adjusting the green
whitepoint of the picture.
B-WP: allows you to customize the color temperature by adjusting the blue
whitepoint of the picture.
R-BL : allows you to customize the color temperature by adjusting the red
blacklevel of the picture.
G-BL : allows you to customize the color temperature by adjusting the green
blacklevel of the picture.
Use the color button to reset to the predefined settings.
O Press the cursor Jeff to return to the Picture menu.
Pixel Plus
for everyday viewing, Pixel Plus is the most ideal setting, as it fully processes
the image to make every single pixel the best it can be, improving contrast,
sharpness, picture depth, and color reproduction and brilliance from every
source, including High Definition.
10

Dynamic contrast
Automatically makes the contrast in the darker and the brighter picture areas
more noticeable as the image on the screen changes.
Normally select Maximum. It may be preferred to select Minimum, Medium,
Maximum or Off.
_[_ Press the cursor right to enter the list.
Select one of the settings with the cursor up/down.
Press the cursor left to return to the picture menu.
DNR (Digital Noise Reduction)
Automatically filters out and reduces the image noise and improves picture
quality when receiving weal< video signals.
_[_ Press the cursor right to enter the list.
Select Off, Minimum, Medium or Maximum according to the image noise.
Press the cursor left to return to the picture menu.
MPEG artifact reduction
MPEG artifact reduction On smoothens the transitions on digital content.
_[_ Select On or Off.
Color enhancement
When activated, this feature automatically controls green enhancement and blue
stretch. It makes the colors more vivid.
_[_ Press the cursor right.
Select Off, Minimum, Medium or Maximum in order to activate/de-activate
Color enhancement with the cursor right.
Active Control
0
0
0
0
The TV continuously measures and corrects all incoming signals in order to
provide the best picture possible.
Select Active Control.
Press the cursor right to enter the list of Active Control values.
Press the cursor right repeatedly to select the Active Control values Off or On.
The picture settings are being optimized continuously. Those menu items can not
be selected.
Press the OK button or wait for the time out to dismiss the Active Control
display.
Picture format
This menu item performs the same as the FORMAT button on the remote
control. See Use of the remote control p, 6,
11

_ii_ Sound menu
TV menu] TV settings
Sound Auto surround
Manufactured under license from Dolby Laboratories.
'Dolby' and the double-D symbol are trademarks of
Dolby Laboratories.
Sound menu
O Select Sound in the TV Settings menu.
_I Press the cursor right to enter the sound menu.
_I Select the menu items with the cursor up/clown and adjust the settings with the
cursor left/right.
Remember, control settings are at normal mid-range levels when the bar scale is
entered.
Equalizer
Allows you to change the frequency response of the sound to match your
personal taste.
Volume
This will adjust the sound output level.
Balance
This will adjust the output of the right and left speakers to obtain the best
stereo reproduction for your listening position.
Digital audio language (only selectable witf_digital broadcast signals)
This allows you to select your language preference in case of multilingual audio
track programs if available with digital broadcast signal.
Note: The default language for the c/Jgitafchannels is the installed menu language,
Alternate audio (only selectable with analog broadcast signals)
This gives you the possibility to swap between the Main and Second audio
Program (SAP) when it is available.
Mona/Stereo
This selects, per TV channel, Mona or Stereo sound when analog stereo
broadcasts are available.
Sound mode
This selects the modes for stereo or surround sound reproduction dependent
on the broadcast signals or signals from external inputs received.
Headphone volume
This controls the level of sound through the headphones.
AVL (Automatic Volume Leveler) (only available with analog broadcast and non-
DigltU signals)
This automatically reduces the volume differences between channels and
programs, providing a more constant overall level. This will also reduce the
dynamics of sound.
Delta volume
This allows you to correct for any permanent volume differences between TV
channels or external sources.
Auto surround
Sometimes the broadcaster transmits special signals for Surround sound
encoded programs. The TV automatically switches to the best surround sound
mode when Auto surround is switched On.
12

TV menu t TV settings I
IAmbilight Mode
TV menu [ TV sea:tings
Ambitight Color
CAUTION: Infrared interference
To avoid bad infrared remote control
reception, place your peripheral equipment
out of sight of the ambient lights of your TV.
Ambilight does not function well when the
room temperature is less than 59°F/15°C.
Enjoy Ambilight
The ambilight menu contains the settings for controlling the ambient lighting. Using
ambient light gives a more relaxed viewing experience and improves perceived pic-
ture quality. Analysis of the picture content adapts the colors continuously. But the
lights can also be set to any fixed color and many shades of white.
O Press the MENU button on the remote control.
O Use the cursor clown to select TV settings in the TV menu.
Use the cursor right to enter the TV settings menu.
O Select Ambilight and press the cursor right.
Ambilight
Off: will switch offthe ambient lights and downlight all other menu items.
On: the ambient lights will be on. Refine the light settings in the menus below.
Brightness
To adiust the light output of the ambient lights.
Mode
Color: this will show constant light according to the settings in the Ambilight
color menu. See below.
Relaxed: the rate of brightness and color change is smoothly and soft which
gives you a more immersive yet relaxed viewing.
Moderate: the rate of brightness and color change as predefined in the factory.
Dynamic: will influence the dynamic impression.
Notes: _The r_;te of change is limited, as not to cause uncomfortable sensations,
According to the selection made, some AmbilJght menu items will be downlJghted
and can not be selected.
Color
Select Color and press the cursor right.
Warm white: The color is matched to that of most normal lightbulbs. Select
this setting if you want the Ambilight to fit best with normal
living room lighting.
Cool white: The color is matched to that of normal daylight (6S00K). Select
this setting if you prefer more cool lighting.
Note: The 6500 K is the SMPTE recommencled setting for ambient back/ighting of
displays,
Blue." The blue color is preferred by most consumers to create a cool, modern
and/or mystical atmosphere. Select this setting according to your
personal taste or mood.
Red: preferred by most consumers to create a cosy, special atmosphere. Select
according to your personal taste or mood.
Custom: select if you want to customise the ambilight colour.
Custom Color (only available when Custom has been selected in the Colour menu.)
Allows you to customise the ambilight colour.
Palette: to adjust the general colour of the light output.
Saturation: to adjust the colourfulness of the light.
Separation
Allows you to define the stereo effect when one of the following options is
selected on the Mode menu: Relaxed, Moderate or Dynamic.
Select Offfor a mono behavior which means that all lamps will behave equally.
Select Minimum, Medium or Maximum to define the Ambilight stereo effect
spread over the available lamps.
Color Boost
Allows you to adjust the color level of light intensity.
Balance
Allows you to adjust the color level of light intensity on the sides of the picture.
13

(_ Features menu o,_
TV menu Features
Features menu
O Select Features in the TV menu_
Press the cursor right to enter the features menu.
O Select the menu items with the cursor up/down and adjust the settings with the
cursor left/right.
Closed captions
This displays the transmitted CC- or CS-text on the screen according to your
chosen CC or CS service in the caption service. This text can either be
permanently displayed (assuming that the service is available in the broadcast) or
only when mute is active.
_) Press the cursor right after having selected Closed captions.
_) Select On, Off or On during mute.
Caption service
This allows you to select the Closed Captions service levels of analog
broadcasting to be displayed.
Closed Captioning allows you to read the voice content of television programs
on the TV screen. Designed to help the hearing impaired, this feature uses on-
screen 'text boxes' to show dialogue and conversations while the TV program is
in progress. Captions will appear on the screen during captioned broadcasts.
_) Select Captions service.
_) Press the cursor right.
O Select the desired Caption service:
CC 1, 2,3 or4
Dialogue (and descriptions) for the action on the captioned TV program shows
on screen.
Usually CC | is the most used. CC 2 may be used for alternate languages if
they are being transmitted.
.T|,2,3or4
Often used for channel guide, schedules, bulletin board information for Closed
Captions programs, news, weather informadons or stock market reports.
Not all Caption services are necessarily being used by a TV channel during the
transmission of a Closed Caption program.
O See Closed Caption in the TV, Features menu, see above, to turn the Caption
service On or Off.
Note: 7]l'_istelevision provides display of television closed captioning conforming with the
EIA-608 standard and in accordance with Sections 15,119 of the FCCroles,
Mow to switch on. j
To switch ON the closed caption feature, go to feature ==> closed caption and
select 'On' or 'On during mute'.
Digital caption service
This allows you to configure the way you choose to view the digital captioning,
Select one of the digital service channels made available by the caption provider.
There are 6 standard services. Service I is designated as the Primary Caption
Service. This service contains the verbatim, or near-verbatim captions for the
primary language being spoken in the accompanying program audio.
Service 2 is designated as the Secondary Language Service. This service contains
captions in a secondary language which are translations of the captions in the
primary Caption Service. The other service subchannels are not pre-assigned. It
is up to the discretion of the individual caption provider to utilize the remaining
service channels.
14