Philips 64PH9905 User manual

Instructions for use
3135015 16091

Once your PHILIPS purchase is registered, you're eligible to receive aft the privileges of owning a
PHILIPS product. So complete and return the Warranty Registration Card enclosed with your
purchase at once. And take advantage of these important benefits.
. Warranty_j
Verification
Registering your product within
i0 days confirmsyourrightto
maximum protection under the
terms and conditions of your
PHILIPS warranty.
.Ownerl
Confirmation
Your completed Warranty
Registration Card serves as
verification of ownership in the
event of product theft or lose.
.MQd !J -"
Registration
Retuming your Warranty
Registration Card right away
guarantees YoU'ltreceive all
the information:and special
offers which you qualify for as the
owner of your model,
Congratulations on your purchase,
and welcome to the "familyF PHI LIPS
Dear PHILIPS pt,e,duct owner:
Thank you for your confidence in PHILIP& You've selected one of the best-built, best-backed
products available today. And we'll do everything in our power to keep you happy with your purchase
for many years to come.
As a member of the PHILIPS "family," you're entitled to protection by one of the most comprehensive
warranties and outstanding service networks in the industry.
What's more, your purchase guarantees you'll receive all the information and special offers for which
you qualify, plus easy access to accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing in a PHILIPS product.
Sincerely,
Robert Minkhorst
President and Chief Executive Officer
P.S. Remember, to get the most from your PHILIPS
product, you must return your Warranty
Registration Card within 10 days. So please mail it
to us right now!
Know these
safetysymbols
,_ This "bolt of lightning" indicates uninsulated material within your unit which may cause an
electrical shock. For the safety of everyone in your household, please do not remove product
covering.
_LThe "exclamation point" calls attention to features for which you should read the enclosed
literature closely to prevent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT"
TO RAIN OR MOISTURE.
CAUTION: TO prevent electdc shock, match wide blade of plugto wide slot, and fully insert.
All"ENTION: Pour 6viter les chocs 61ectriques, tntrodulre la lame la plus large de la fiche dans I_
borne correspondante de la prise et pousser jusqu'au fond.

SAFETYINSTRUCTIONS- Readbeforeoperatingequipment
Thisproductwasdesignedandmanufacturedto meetstrictqualityand
safetystandards,Thereare, however,someinstallationandoperation
precautionswhichyoushouldbeparticularlyawareof.
1. ReadInstructions-Allthesafetyandoperatinginstructionsshould
bereadbeforetheapplianceisoperated.
2. RetainInstructions- Thesafetyandoperatinginstructionsshould
beretainedforfuturereference.
3. HeedWarnings-Allwarningsontheapplianceandintheoperating
instructionsshouldbeadheredto.
4. FollowInstructions- Alloperatinganduseinstructionsshouldbe
followed.
8. WaterandMoisture- Theapplianceshouidnotbeusednearwater
- forexample,neara bathtub,washbowl,kitchensink,laundrytub,
inawetbasementornearaswimmingpool,etc.
6. CartsandStands- Theapplianceshouldbeusedonlywitha cartor
standthatisrecommendedbythemanufacturer.
6A. _Anapplianceandcartcombinationshouldbemoved
withcare.Quickstops,excessiveforce,and uneven
surfacesmaycausetheapplianceandcartcombination
tooverturn.
8B. Till/Stability -All televisionsmustcomplywith recommended
internationalglobalsafetystandardsfor tiltandstabilityproperties
ofitscabinetdesign.
•Donotcompromisethesedesignstandardsbyapplyingexces-
sivepullforcetothefront,ortop,ofthecabinetwhichcould
ultimatelyoverturnthep_educt.
• Also,donotendangeryourself,orchildren,byplacingelec-
tronicequipment/toysonthetopofthecabinet.Suchitems
couldunsuspectinglytallfromthetopofthesetandcause
productdamageand/orpersonalinjury.
7. Wallor CeilingMounting- Theapplianceshouldbemountedtoa
wallorceilingonlyasrecommendedbythemanufacturer.
8. VanUlation- Theapplianceshouldbesituatedsothatitslocationor
positiondoesnotinterferewithitsproperventilation.Forexample,
theapplianceshouldnot besituatedona bed,sofa,rug,orsimilar
surfacethatmayblockthe ventilationopenings;or, placedin a
built-ininstallation,suchasa bookcaseorcabinetthatmayimpede
theflowofairthroughtheventilationopenings.
9. Heat- Theapplianceshouldbesituatedawayfrom heatsources
suchas radiators,heatregisters,stoves,or otherappliances
(includingamplifiers)thatproduceheat.
10. PowerSources- Theapplianceshouldbeconnectedto a power
supplyonlyofthetypedescribedintheoperatinginstructionsoras
markedontheapphance.
11. Power-CordProtection- Powersupplycordsshouldheroutedso
thattheyarenotlikelytobewalkedonor pinchedbyltemspiaead
uponor against them,payingparticularattentionto cordsand
plugs,conveniencereceptacles,andthepointwheretheyexitfrom
theappliance.
12. Cleaning-Theapplianceshouldbecleanedonlyas recommended
bythemanufacturer.
13. PowerLines- Anoutdoorantennashouldhelocatedawayfrom
powerlines.
14. OutdoorAntennaGrounding- Ifanoutsideantennaisconnectedto
the receiver,besuretheantennasystemisgroundedsoas to
providesomeprotectionagainstvoltagesurgesandbuiltupstatic
charges•
Section810 oftheNationalElectricCode,ANSI/NFPANo.70-1984,
providesinformationwithrespectto propergroundingofthemats
andsupportingstructuregroundingof the lead-inwireto an
antennadischargeunit,sizeofgroundingconnectors,locationof
antenna-dischargeunit,connectionto groundingelectrodesand
requirementsforthegroundingelectrode.SeeFig.below.
18. Non-use Periods - Thepower cordoftheapplianceshouldbe
unpluggedfromthe outletwhenleftunusedfor a longperiodof
time.
16. ObectandUquldEntry- Careshouldbetakensothatobectsdo
notfa and qu dsare not spilledintotheencosurethrough
openings.
17. DamageRequiringSorulce- Theapplianceshouldbeservicedby
qualifiedservicepersonnelwhen:
A. Thepowersupplycordortheptughasbeendamaged;or
6. Ohects havefallen, or liquid has beenspilled intothe
appliance;or
C. Theappliancehasbeenexposedtorain;or
D. Theappliancedoesnotappeartooperatenormallyor exhibits
amarkedchangeinperformance;or
E. Theappliancehasbeendropped,ortheenclosuredamaged.
18. Servicing- Theusershouldnotattemptto servicetheappliance
beyondthat describedin the operatinginstructions.AI/other
servicingshouldbereferredtoqualifiedservicepersonnel.
NotetotheCAWsysteminstaller:Thisreminderisprovidedtocallthe
CAWsysteminstaller'sattentionto Article820-40 oftheNEC that
providesguidelinesforpropergroundingand,inparticular,specifiesthat
thecablegroundshallbeconnectedto thegroundingsystemofthe
building,asclosetothepointofcableentryaspractical.
ExampleofAntennaGrounding
asperNEC
.-.* ..
- NationalElectricCode
GROUNDCLAMP ANTENNALEADINWINE
ANTENNADISCHARGEUNIT_z_'nou_)
GROUNOINGCOla)UCTOns(E aZCmNm._)
GROUNDCLAMPS
8ERVI_ EQUIPMENT

Weleonm/Product Registration ................... 2
Safety/Precan ons ............................... "_
Table of Con cnts ................................................... 4
Features, Model and Cahinet htformatkm ................. 5
L
_NTSC Analog On-Screen Menu Features
FIRST TIME SI:TUP
_Autoluatic l)rogralllllling (If"local NTS("
Channel _, and other Control l:canllCS ....... fl-7
PICTURE MENU
+Adjusting Color. Brightness, Sharpncs,,.
Tint. aml I:'icturc Contlo[_, .............................. 8
¢'Usi g e C earvicw Co[tuo] .................... 8
_Adiustmg the DPTV's ConvErgenceControl ......9
FEATURES MENU
•ffSening the Smart Picture Controls .............. 10-I l
O'Setting the DPTV for Closed Captioning .......... 12
@Setting the DPTV for Cable/Antenna Signals... 13
_Adding Channels in Memor_ (Automatically). 14
+Adding Channels in MEmory (Manually) ......... 15
<?Setting the DPTV Clock .................................... 16
@'Adjusting the Channel Display Control ............ 17
i
•0,Using the Chatmel Label Contro . . 18
_'Using Parental C0ntrol/Content Advisory:
" C0de Setup/BloCking Channelsll ............ A9-20
•Content Adviso_- Mov e Rat ngs 21-22
_ATSC Digi!al On-Screen Menu Featnres
DTV SETI.IP
_Automatic F'rogranlmmg (ff I)igital ('hannEIs
and Tuning ProglamlChanncl SElections ..........35
PICTURF MEN[J
_Adlustmg Cohlr. Brighme_,,;, Sha[pnc_.s,
Tint, alld Piclttte ('t/nllOlS ................................ _6
•_'A(liustmg DTV Conx crgcncc ..................... :_7
SOUND MENU
',5Surt Dural Sotlnd Speaker ('onncctions ............. 38
+Selecting the Dr'TV Surround Moclc t.'onnol._39
+Dotby Digital hlternal and External Speaker
System Use and Connections ...................... 39-40
+Adjusting Bass and Treble Sound C(tntrolY;......41
'@Using the Auto Volume Control ....................... 41
SPEAKERS MENU
•0-Adjusting Speaker Menu Controls for
Front/Center/Rear multi-speaker arrangements42
O'Using the Test Tone Audio Signal Control .......43
FEATURES MENU
'6Using the DPTV for ATSC Closed Captiomng 44
C-Adding Channels in Memory (Manually) .........45
@Using Parental Control/Content Advisory:
•Code Setup_ockitt_ Channels .. _;...... 46.47
•Contel;ttAcl_t_bry .,M6vie Ratings 48-49
• Parental Guid'el ne_ :.. :............ ::,............... 50
_ MONITOR On-Screen Features
@Connection of VGAJSVGA/and High Definition
(HD) Component Video auxiliary equipment. 53
+Adjusting of D_ Monitor Display controls
ffor V_A/SVG_XT HD devils)2;.i... ......... 54
...... :iiiil iii i
General Information
if Something Isn t Work'ng ............................. 55
Cleaning and Care .................................................... 55
Index ........................................................................ 56
Regulat0ry Notices . ..,..;;.......... 56
_!ossary 0_ D_,Terms ........................... ,_,r:,:..........._7 .....
Copyright 01999 Philips Consumer Elecironics. All rights reserved.

ATSC Certified -for fu'll compliance with analog
NTSC and all 18 digital ATSC formats as specified by
the Federal Conununications Commission (FCC).
Iligh Definition Digital - with rift} 1920 x 1080
interlaced image resolution capal',ility to achieve
superior hnage perlornumcc.
64" Widescreen I)isplay _itll a super-large 6,1"
Widcscrccn 163) display I(Irlnzfl '.x'hich provides Ior a
Irtle hoillt_ thcatt'r or clnCTlla(tc cxpt21-1cnt2c I1 a 4:3
aspcct ram picture is the primary source, il will be
expanded to fill the screen.
120-Watt Amplifier toptovi(Ic upto2(twalt_
atnplification for each el the [+chlRight II,mt, Center,
l.efl/Righl rcai ,'qtlrtotHid, arid StJb',votffcr channel
speakcTs
First Tilne Set Up - for both NI'SC and ATSC
,channel programming to autoraatieally preset the
DPTV h)r available area slations.
Parental Control for "Censoring" -this feature can
block out channels to keep children from watching
undesirable programming. Part_tal Guideline and
Movie Rating settings can also be used as part of the
new Content Advisory Data system available with TV
programming.
Pronto Remote Control - universal, learn remote
which controls virtually all IR devices, learns new
commands as your system expands, and can be
customized according to your personal preferences.
Featuring a large LCD backlit touchscreen, the Pronto
gives you easy access to all key DPTV features.
Dolby _ Digital Sound - for multichannel sound
reproduction at its best. Fully compatible DPTV audio
system wilt replay a received Do!by Digital 5.1 sound
source through nemal sys em amp! ficati0n, or
function within a home ifieater sound system.
_k,.i _ t_O_. "_!_Y5__ _8_e__"_t_
I_ | I_i | '1[" A_ d°uble!D_ymb°lare_rademack_°fD°lbY
...... Laboratories, eonfidealial Unpublished
Works, OI092-1997 Dolby Lalx_ratoriea, Inc.
All rights t_.,ex,,ed.
AudiofVideo Connections - for external sources and
home theater equipment to provide the ultimate in
flexibility. In addition to separate NTSC/ATSC antenna
inputs, connections include inputs formatted tot S-
Video; composite video; Left/Right audio; six-channel
audio (di_etly to internal amplifiers); External Center
c_annel AUdio Amplifier inputs; VGA; and High
Definition component (Y PB 1_) video - such as used
Use the Set-Up Guide (supplied with your
DPTV information packet) for details on:
• Antenna llook-ups t_
First Time Use and
Control Descriptions
Basic DPTV and
Pronto Remote
Operation
DTV Program Rollout Information
As you unl)ack your I)PTV please note that the
iol]owmg items have been inchlded ,.viLliymlr set:
Owner's Manual and DIrFV Quick Use Guide
Safety Tip Information
Factory Service Center Locations
Wawranty Registration Card
Pronto Remote Control Transmitter
Product Package contains dedicated Pronto
Owner's Manual information
Batteries for Remote Control Use
Please cake a few minutes to complete your
registration card. The serial number for the Dvrv
is on the back of the product.
Refer to the back of tMs manual for instructions on
the cleaning and care of the DPTV.
Product End-of-Use disposal
Your new digital projection television and its
packaging contain materials that can be recycled
and reused. Specialized compames can recycle
your product to increase the amount of reusable
materials and minimize the amounts which need
to be properly disposed.
Your product also uses batteries which should not
be thrown away when depleted, but should be
handed in and disXposed of as small chemical
waste.
Please find out about the local regulations on how
to dispose of your old products, batteries, and
packaging materials whenever you reptace
existing equipment.'
NOTF: Not all features (and drawings) discussed in thls i
m',ner's nlanuM ',rill necessarily match those found ",,dOt yOUrI
television set. This is normal and does not require you|
ontactlng )'our dealer or requesting service, I
Because of continuous product improvements, the
information mentioned in the documents accompanying your
product are subject to change without notice.

FcrSt Time Setup automatically takes
are of some basic control feature
settings for you. Follow the steps in this
section to quickly add area channel
numbers blip the DPTV's scan system
memory, and set tile DP7V for your
connected sigrml (Anterrna or Cable.)
You can also set-up your TV Sntart
Clock feature for thefirst time as well.
Press the MENU (or ok) button
on the Pronto remote or DPTV. An
on-screen list of NTSC features
shows on the "MAIN MENU".
_,_,_ Seleet" IST TIME SETUP" on
the DPTV's Main Menu. (Selected
MENU ite_ is highl ghted in RED.)
Press the remoWs Menu _.-i,
buttOns to move Up,tD_WN and
frOm SIDE-T0-SIDE withi,z the list
of on-screen features.
Note: The Smart Clock
g option "SET TIME
AUTOMATICALLY" sets the
DPTV's clock according to TV
station Data Services Information
(where available). With this mode
the eieek will a_iomatiCally reset
itself after power outages and
-- ANAL_ MAIN _NU.
The First-Time Setoo
bravoes _slmole metl_od
of adlUStmg the mos_
imDortant coNtt'o]$ for
_nls t.elaVlSlOnreoelver
Press 'M" To ConLiNue --
Many of the current TV
CORWOI _e_Jngs WI Oe
modlhed by contlnupng
_ith F_st-T_me S_tuo
Press STATUS to QUII
Press "M" _ Continue
/
I
This TV is equipped with
the Smart Clock feature
This feature is designed
to operate only on the
analog TV antenna
Press "M" tO Continue
%
--_ Please check tha_ y0dr
analog _/antenna or cable is
connected to Lhe plug
marked ANT on
he TV rear input panel
id
tI
Press STATUS to Qul_
or
Press "M" to Continue --
• Please War_ "
System 15testing for
correct tuning mode
for the analog TV antenna
• Please Wait "
System iS searching for
a_lactive channels
for the analog TV antenna
Tesbng channel 2
in cable mode
' I
The search for active I
channels is complete This TV con_ins 8clock
for the analog TV Rn_+_nna wbrch can _lut'Om_Jcal_lY DO _wBnt" t_O S_ th_
be set through the clock automatically °
SMART CLOCK feature
17 channels were found
and saved in memory
Press "M" to Continue The clock will be set
to the bme broadcast
by certain TV sLatJons
Press "M" to _onbnue
SET T_ME MANUALLY
Press "& _" _o Select.
Press "M" to Continue
>
i
_. ....................................... _ .... J
_1_ _ See follov, ing page for details on "Sel Tin_ Manually"
q. I
Press to select the
r_me zooe thatyou lee in
EASTERN
(_NTRAL
MOUNTAIN
PAOFIC
AL&SKA
HAWAII
C_ you observe
DaylightSawngs Time0
NO
Press '& _" to Select
Press "M" to Continue -
I
The t_rr_ is broadcast b_
certain _/stations
We suggest t_fing PBS first
Enter the channel
Press "M" to _or_inue
Press "M" to Continue

pfilease remember, SETUP is a
rst-use, one-time operatiotz
and will not have to be repeated
after initial adjusmtents are made,
Note: Press the "exit" button on
the rentote or DPTV to stop the
:SETUP op_ratio_t at cry titt e
Convergence (or lining
@ up of red and blue light
)alhs on the TV screen) has been
)reset at the factory for your
convenience and should not need
any further adjustments. However,
Convergence controls are
)rovided (in both the First Time
Setup and Picture Menu areas) in
case the picture on your DI_T_/
shows color fringing, Color
fringing is when colors "bleed" or
appear around the edges of on
screen images and objects. If your
DPTV should ever need to be
adjusted for such a condition.
please also refer to the DPTV's
Picture Menu Convergence
control page section for further
details,
n setting the time
System is looking for
brae on channel X
Please wa_t 45 sucof ds
f
PleaSe check TV CloCK _nd
adluSt If necessary
The Lime _s curren:Iy
set to i2:OO RM
Piease enr.er current trNe
Or
Press "M" to Con_nue --
I
Time was found
on channel X
The Lime r, 12 OOPM
prOS S "M" T.0 Conbnue l
/
I
E_ E-NCE MENL_
[,_LIGN RED
r_ ALIGN BLUE
iLGONVEROE MULTi PONT
,-i II
F ............... J
I
Time was not found
on channel X
ENTERANOTHERCHANNEL
8U TIME_N_ALLY
Press "& T" to Select
Press "M" to Continue
.... j
Thiscompletes the
FirsbTime Setup
Press "M" to Exit Setup
CONVERGE RED POINTS --
USE4_TOADJUST
DIGIT 2,4,6.8 TO MOVE CUF
MENU TQ RETURN
PRESS MENU NOW TOCONTli
I
i _iii_::iil :i i i i _ _i i ili_:iii!il!!:_¸ _ il :i:_:¸
+++++
+++++
See the "Convergence Control" Smart IMp Note given on Ihk page,

TpO adjust your DPTV color and
icture controls, select a TV
channel and follow the steps shown
below:
Select BRIGtlTNESS,
PICTURE, COLOR, TINT, or
SHARPNESS picture control.
With the PICTURE MENU on-
screen, move the RED highlight
with the MENU 421. bunons, qqmn
press the MENU (or ok) button.
just the selected
VIDEO ENHANCEMENT
* Note: An additional Picture Menu "VIDEO
ENHANCEMENT" control (sirrutar in function
and use as the Sharpness control) is also av_lab_c 1o
further improve picture intensity and delai],
particularly for the playback of DVD player source
material.
M_mLO_ Mt_¢ tqa.NU.
.j
n
\1
Select the
NEXT control and
then press MENU
(or ok) button on the
remote to view
_, additional controls
grouped under same
_'_ feature heading
(Tint, Brightness
,or Picture. etc.).
Remember, control settings are at normal rfud range levels when
the bar scale is eenlered
Press (-) or (+) to add or eliminate color
I_]LI._I_T2_,_ Press (-) or (+) until dark parts of the picture
show good detatl
Press (-) or (+) In improve detail in the picture
_J2LT Press (-) or (+) to obtain natural skin tones
Press (-) or 1+) until whilest parls of the piclurc are
as bright as you prefer
Cearview is a sharpness feature
which smoothes out
background snow (or picture noise)
without losing picture image detail
or crispness.
<_ Select CLEARV1EW control.
button.

_llinvergenceis the correct
ning up of the red and blue
light paths on the DPTV screen.
NOTE: If no color frit_gittg (see
Smart Help) shmvs, then no
Convergence adjustment._ are
It('('essary.
Select CONVERGENCE
control.
With PICrURE MENU (2 of 2)
on-screen, move the I_ED highlighl
with the MENU 4_ buttons. Then
press the MENU button.
<_ Press the MENU _kT buttons
to select either the Red or Blue
Convergence control, press the
MENU button to continue_
_Press the MENU _o_ buttons
to move the selected r_l (or blue)
convergence cross directly over the
white'cross on the DPTV screen.
Remember, Convergence
_has been set at the factory for
best viewing, but if One or more of
.. .ANALOG MNN MENU
L
ii;iiiiiiii!iliiiiiiii
R£ MENU '
:=, 1 'OP'2 I, ':L'_
l
--= pICTURE MENU
%,J, n *1 . _
20F2--
,1
CONVERGENCE MENU
ALIGN BLUE
CONVERGE MULTI POINT
BACK l
÷
PRESS 4_ TO ALIGN RED
PRESS MENU TO RETURN
V
NOTE: Adjusmlents for "Multi-Point" on- I
screen color fringing c_ also be nlade as pan
of the DI'TV's Convergence control system
Follow the on screen menu directions to
select individual screen areas that can be
readjusted and set for varying red/blue color
fringing conditions. These muhi-point
settings can then be "Saved" to memory for
the specific areas of the DPTV screen (or
Factory Settings for convergence can be
recalled and put back into place for use).
_,IULTI-POINT CONVERGENCE CONTROLS
[........ ll
| _'o_ __
•,_=_'V"_,,,_ ++++
+c+_+ +
++++

_tth Smart Picture you can set a
_umber of video and audio
controls to your own personal
preference. Once the individual
controls have been adjusted to the
levels you desire, use the list of Smart
Picture feature category titles to
quickly reselect these "personalized"
settings contained within the memory
of the DPTV. (See the next page for
?tore details on the labeling options
attd use of Smart Picture.)
Select the SMART PICTURE
control.
With the FEATURES MENU on-
screen move the RED h ghl ght
with the MENU _*_ buttons. Then
press the MENU I_utton.
Press the MENU AY buttons to
list for Smart
Press the MENU buuon to
t(u") the desired title.
PresstheMENU tbuttons
, _, ANALO G pAAI_J M[NLJ ,
SMA FlI" _ CABLE
....... 1OF3 .....
FACTOry SETTINGS [
@ _oSELECT
-- SMA
I0

F_allowing your initial setup
djustments (see previotts page),
select the desired Smart Picture
'in order to place the DPTV
to the personalized set of audio and
video control settings for that title.
Select the SMART PICTURF
control.
With the FEATURES MENU on-
screen, move the RED highlight with
the MENU (_. buttons. Then press
the MENU button.
d
SMAR T
......... I0g3 ....
pHItlPI
•- SMART PIG -_-_= ,
LABEL 5
FACTORy sE-rr _NGS
[M3_ sEuect
Zche "CHANGE LABEL" control
an be used to update the title of
a SMART PICTURE setting into a
name or label that may be easier for
you to remember.
With the "SMART PICTURE
LABEL" control on-screen, press
the MENU AY buttons to spell out
I a new iabel or rifle for the selected
SMARTPi_ category t le
I ...........

ClyOSed Captioning (CC) allows
otl to read the voice content of
NTSC television programs on the
DPTV screen. Designed to help the
hearing impaired this feature uses
on-screen "texl boxes" to show
dialogue and conversations while
the TV program is in progress.
Select CLOSED CAPTIONING
control.
With the FEATURES MENU on-
screen, move the RED highlight
with the MENU 4_' buttons. Then
press the MENU button.
<_ Press the MENU AT buttons
to move the RED highlight. Press
the MENU button to select (t,,,') the
desired Closed Caption mode - For
Example: ALwAYs ON" and
"CAPTION l".
CAPTION 1, 2, 3, 4:
dialogue (and descriptions)
for the action oh.the capt oned
TV program shows on-screen.
(See Important Note on this
[_ NOTE: Not all TV programs and product commercials are made for
broadcast wilh Closed Caption (CC) information included. Neither are all
Closed Caption modes (CAPTION I-4; or TEXT I-4) necessarily being used hy a
broadcast station during the transmission of a closed caption program. Usually
"CAPTION I" is the most used nnode to, view captioned material. Refer to your
area's TV program listings for the stations and times of Closed Caption shows.
ANALO GMAIN MENLI
,_,1 . I,
NOTE: The ON DURING
MUTE ONLY control can
be used to set the DFrv to
turn the Closed Capuon
mode "ON" whenever the
:MUTE butt ..... the
remole i5 pressed
ii!¸
=, FEATURE MENU .........
_Og3
ALWAYS ON
ALWAYS OFF
ON DURING MUTE ONLY
TEXT 2
P_iON 3
U CAPTION _ TEXT 3TEXT 4
CAPTION I mode
Example Screen Display
stations will often use
spelling abbreviations, symbols,
dropouts and other grammatical
Shortcuts in order to keep pace
i
Closed Caption infonnation will usually appear
in black and white (aldlough some broadc_ler_
or netv*ork$ may (_casion3lly use color It
highlight or draw atlc nlion Io ¢erltu n areas I
FULL SCREEN TEXT
will block DPTV screen from viewing
12

yD u need to make sure the
PTV is set to pick up either
Cable TV or Antenna signals, hz
other words, the DPTV needs to
know if you connected a Cable TV
signal or atzornzal allletttlO loils
ANTENNA plug.
NOTE.- If you wetzt through First
Time Setup (see page 6), this task
has alread) been completed fi_r
you.
Select CABLE CHANNEL
TUNING control.
With the FEATURES MENU on-
screen, move the RED highlight
with the MENU 4_ buttons. Then
press the MENU button,
<x,_ Press the MENU AY/auttons
to move the RED highlight. Press
the MENU button to select (t,-") the
desired mode - For Example:
CABLE.
CABLE- If you DO have
Cable TV connected
to the DPTV.25
I
/
,_ ANALO G MAIN M[t_U .....
.... FEATURE M[NU ....
SM.aT 2;
10F3_
1,
CA BLE_NIN_ _"
13

yiour DPTV can automatically set
tself for local area (or Cable TV)
channels. This makes it easy for you
to select only the TV stations in your
area when the CIIANNEL • •
bullons are pressed.
NOTE: If you went through First
Time Setup (see page 6), this task has
already been completed for you.
Select CHANNEL MEMORY
(START AUTO-PROGRAMMING
control,
With the FEATURES MENU on-
screen move the RED highlight with
,L ,•,
the MENU _e_ buttons. Then press
the MENU button.
,y _lb
the MENU ._' buttons to
,.ANALO G MAIN MENU •,
u" Channel Numbers arc /
Saved in Memory
.... £EATURE MENU
.................. 1 OF3 ....
,t
AUTO.-PROGRAMMJNG
CHANNEL MEMORY
9,¢j 10 11 12
13 14 15 16
17 18 19 20
i2_ 22 23 24
Try it out, Press the
CHANNEL,• buttons
and see which channels you can
select.
Remember_ an Antenna or Cable
14

Auto-Programming (see
previous page) adds all the
channels it can find (on your
Antenna or Cable 73/system) into
the DPTV s memorT. Add/D_lete
Channels makes it easy for you to
add other channels, or drop
unwanted channel_, from the list of
channels itt the DPTV's memory.
Select CHANNEl. MEMORY
(ADD/DELETE CHANNELS)
control.
With lhe FEATURES MEN[/on-
screen, move the RED highlight
with the MENU t_ buttons. Then
press the MENU _utton.
! .
•P_ Press the CHANNEL (+)/() ,
(or number buttons on the:Pronto s
2/3 touchscreert display_ t_'select
the channe! you want to add or
delete,
the DPTV's
memory,
Press the M_U "_ button to
DELETE _e cfiannel from
-- ANALO GMAIN MENU r •
_;_i_ ¸_i_ i_ ¸? ii '_:i:,_i_i_:.
........ ii!iiiiiiiiiii!ii!_i!ii_i_i_
_ _ii_iiiii_!__ _ii ii i i!_ _
- _ FE_.IURE MENU
1 0F3
-- CHANNEL MEMORY
SELECT CHANNEL
(_ _ CELETE CHANNEL
(_ when FINISHEO
15

[• .
FOur DPTV is able to deliver
the lifelike, widescreen picture
(or "home cinema" viewing
experience) that is promised with
High Definition TV programming.
The Display Format control can
be used to expand conventional
4:3 aspect ratio (width-to-height)
broadcasts in order to fit your
DPTV's widescreen 16:9 fomfat;
or to reset the screen to best
match the current programming.
Select DISPLAY FORMAT
control.
with FEATURES MENU (2 of 3)
0n-s_n move the RED .,,.
_igh,,}i_t _i th _(_ _ENU (i)
ME_Ui _E:ak)b_ttonS t_:::
? ??
(
_: :::: :
Note: In the past the
relationship between a TV
screen's width to height, or aspect
ratio, has b.istorically been 33%
wider than the picture screen
height (or a 4:3 aspect ratio). The
widescreen format of your DPTV
screen is nearly 80% greater than
its measu_ height (which
accounts for a 16:9 aspect ratio),
The reason for the 16:9 aspect
ratio screen is that it allows for the
gof
iii _ ¸iii
o _i'!iii(iii!i!
CF_/_/klEL PARENTAL
I_SpL_y FORMAT_= ----_ .....
t _ i
Buil g Trade News
Panoranli¢
Panoraml¢ - Conventional picture
is expanded to fill tile full 16:9
aspect ratio screen 0tea Most of
the nondinear picture expansion is
performed toward the outer edges
so that correct proportions are
retained in the center or"the scrc_ll
4:3 (Standard) -ConvendonM IV
piclur_ format shows on the
screen Black bat a_eas show on
the side margins ot the screen
16:9 (Expand) - Full widescreen
mode with linear expansion to
view HDTM program broadcasts
Used for material originally
)reduced in 169 fonual
Fheater 1/2 -Expanded zoom
modes with picture images
increased in magnificalion
Designed for use widl "'lctterbo rJ'
or cropped movie thmges such as
found wilh Cinema_cope or
Cthcra_3 type program nlal_t_Pll
Note: with the Theater modes
there can be somme loss o1
thformaPon at die edges as the
ptcture expands to fill the sen'ca
4:3 (Standard)
Bull< ing Trade News
16:9 (Expand)
Theater 1or 2
16

I _/ith the Channel Display
V V control you can change the
size and location of the on-screetl
channel and clock information.
•ISelect CHANNEl. DISPLAY
control.
With FEATURES MENU (2 of 3)
on-screen, move the RED
highlight with the MENU t_'
buttons. Then press the MENU
button.
_Press the MENU &.Y and
MENU(or ok) buttons to
h!gh!ight and select (t.,.")!he
_play 2
10:06
Channel Display Options "1
Press the Channel &V buttons and /
you should see the Display Size
you selected
Note: Yqle SMALL SIZE display
shows only tile channel number,
nol the time (or clock)
your DPTV comes with an on-
creen clock• During normal
operation the clock appears on tile
screen with every channel change
(and when the STATUS button is
pressed).
Select SET CLOCK control.
w th or
Ion screen, move the RED highlight
with the MENU 4_. buttons. Then
press the MENU b'_utton
the remote's number
t0's 2/3
:tO_et _e tim_
I
/
_ _ii::!iiiiiiiiiiiiilii_i_!i i_i,ili!i!iilii_i_i:_.....
..........._i_ii_iiiiii ii¸= i = !i_ ii!i ?: _ :_ i ii
1_,, z ,,,
• 9 19_
, PLEASE SEAo • ]
The rentotc's MENU _-:_ buttons
can also bc used to set tile hours.
minutes, and AM/PM portions of
the clock.
power to the s_t is interrupted,)
OPTV Clock s_ltlngs may he lost
when the unil is unplugged (or AC
17

Do you ever have trouble
remembering on which
channel a particular station or
network is located? The Channel
Labels Control is a quick way to
view and select chatozels from a
list of Labeled channels.
A Label is a four letter callout you
can set to appear with the Oil-
screen channel number. Example
Label: WXYZ -for a TV station's
call letters.
]W n
Choose From Lnst
V
C_D o_ (_ bo SELECT
(_) or (_) to CHANGE
(_ when FINISHED
MANUAL- To create your
own Channel Label:
Press the Channel &• or
Number buttons to select
desired station.
A red highlight shows the
active letter space for the
channel label.
Press the MENU ••
buttons to pick any of the
]citers or symbols that arc
given for your use.
Press the MENU • •
buttons to move the red
highlight to the other letter
spaces and repeat.
Press the Exit button to
clear the screen when
finished.
PRESETS -To pick a Label
from the "LABEL" list:
Press the Channel &.• or
Number buttons to select
desired station.
Press the MENU &•
buttons to move up and
down the Channel Label
list.
Just stop on any label you
might want to use.
The selected label
automatically appears with
channel changes and when
the STATUS button is
)tossed.
?ress the Exit button to
clear the screen when
finished.
18

parental Control allows parents
to block out, or censor ', any
channeL_ they think children should
not watch. A channel placed under
Parental Control callnot be viewed
until a correct access code is tt_ed to
unlock the channel f_lr viewing.
First let's set your Parental Code:
Select the PARENTAL
CONTROL.
With FEA _t ""
.'uRES MENU (2 of. )
ou screen, move the RED highlight
with the MENU _M) 4_1, buttons
Then press the MENU button
"CHANNEL BLOCKING" and
"SETUP CODE" show on screen.
Press the MENU AT and
I_IENU (or ok) buttons t_highlight
and select the SETUP CODE item.
the ACCESS
CODE SETUP screen as you press
the number buttons.
"INCORREC TACCESS CODE -
TI_'_"AGAIN _ will also show on the
;O,7,1_ 1 on the remote
Parents - it isn't possible
to unlock or defeat your
Censor Code without changing to
anew code number, So if
+
NOTE:Your TV left the factory with the Parental Code set to "0000". If you are using your TV and
the Parental Control for the first time, and don't want to SETUP a new Access code number, you can
use Ihe "0000" number to block channels - see ne×l page•
Iqlc "071 I" Parental Code (shown on this page) is given as a default or way to reset the Code when
the current Access number is not known, Also, once set, the same Access Code Number will apply
!or Ihe use and operation of the Parental Control system fotmd in both the NTSC/Analog and the
ATSC/I)igital F:caturc Menu c¢lntrol areas
. rEAtU_ ,_lt _t J
• d,,_•A,-
.20¢ 3--. ,
II
I
,-- ...................... .J
-- pAAEF_IAL _Nt_ - --
T
i
1--...................... .i
i
Press MENU • to go on and start
to "block" channels
Press MENU • to go to "Content
Advisory" (or TV and Movie Ratings
system of channel blocking)
Press MENU Io return Io the Parellt,U
Control Menu scrgen
Press STA'rUs to clear lhe screen¸
19

tier your personal Parental
namber has been set (see
,_ j Select the PARENTAL
CONTROL.
With FEATUI_.ES MENU (2 of 3)
on screen, move the RED highlight
with the MENU (M] ,[_, buttons.
Then press the MENU button.
_,_ Press the MENU AY and
MENU (or ok) buttons to
highlight and select the BLOCK
CHANNELS item;
Remember, to make
)IYI'V viewing easier all
channels will be unblocked, once
q0rrect Parenlal Code n_ber
h_ _¢_n enteted_
:P_ ntal C_'atro| is _a_k4n:p.laee
II