Philips NX20 User manual

www.philips.com/support
Register your product and get support at
User manual
Party Speaker
NX20

Your Party Speaker system

Your Party Speaker
system
Dadaptor
Treble & Bass.

1.MIC VOLUME/MENU KNOB
2.LED DISPLAY
3.VOLUME/EQ PUSH KNOB
4.MIC1 IN SOCKET
5.MIC2 IN SOCKET
6.TF CARD INPUT
7.USB CARD
8.POWER/INPUT
9.LIGHT/MODE
10.MIC PRIORITY
11.PREVIOUS SONG
12.PLAY/PAUSE/FM
13.NEXT SONG
14.LINE INPUT
15.LED CHARGE STATUS:
RED = CHARGING
GREEN = FUL Y CHARGED
16.DC 9V INPUT
L

LED display
POWER/INPUT
LIGHT/MODE (Light mode selection & Light on/off ).
Microphone priority on/off button.
Previous track.
Play/Pause/FM: Play and pause, Press 3 seconds enter FM
LED CHARGE STATUS: RED = Charging GREEN = Ful y charged
DC 9V input
MIC VOLUME—Press and turn the knob to adjust volume
of bass (1b) and treble (1t)
USB port.
TF Card port
Turn the Music volume knob adjust the needed music volume.
Press the knob one time and turn the knob into EQ modes:
POP,CLASSIC,JAZZ,ROCK.
2 external 5mm wired microphone port are available.
: Short press to turn on/off the unit and long press
to INPUT menu which includes:USB/TF/FM/BT/LINE IN.
channel automatic searching and store.
Next programme.
3.5MM line in input
l

battery
battery
CHARING THE SPEAKER: During speaker playing process,noise and less volume or
automatically power off reminds low battery, connect the provided adaptor and
speaker DC IN port to 100-240V power supply, Red light indicates charging,
green light indicates fully charged.
LED indicator of battery level:
45

Press POWER button to switch on the unit.

D
D
Adaptor
Adaptor 9V,1.5A are available for TANX20.

Press INPUT to change the other playing modes.

Turn on the Speaker.

20W
20W
70Hz-15kHz; ±3dB
60
2.402
DC 9V, 1.5A
7.4V 2000mAh
290x425x260mm
4.5kg
DC Output Power
DC Power

DC adaptor
or recharge the
speaker unit.
DC adaptor
DC
adaptor