Philips 27DVCR55S Operating manual

ANT.
L
AUDIO OUT
R
COAXIAL
ANT.
IN
OUT
ANT.
OR
2
3
ANTENNA or
CABLE TV SIGNAL
CABLE BOX
CABLE TV SIGNAL
RF COAXIAL
CABLE
4
1Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
2If you do not have a Cable Box, simply connect your Antenna or Cable TV signal directly to the ANT(enna)
jack on the rear of the TV/VCR/DVD.
3If you do have a Cable Box or Satellite Receiver, first connect the Cable TV or Satellite signal to the IN jack
on the Cable Box or Satellite Receiver. Then, use an RF coaxial cable (not supplied) to connect the OUT
jack of the Cable Box or Satellite Receiver to the ANT(enna) jack on the TV/VCR/DVD. To view any channel,
set the TV/VCR/DVD to the output channel of the Cable Box or Satellite Receiver (channel 3 or 4). Then, select channels
at the Cable Box or Satellite Receiver.
4When all connections are complete, plug the power cord of the TV/VCR/DVD into an active power
outlet.
5Press the STANDBY-ON 2button on the TV/VCR/DVD or its remote to turn on the TV/VCR/DVD. The
first time you turn on the TV/VCR/DVD, you should complete the TV/VCR/DVD setup. See the other side
of this Quick-Use Guide for details.
27DVCR55
There are many ways to connect your new TV/VCR/DVD to your other equipment.This Quick-Use Guide
shows the easiest, most common connections for the TV/VCR/DVD.
12nc: 8239 210 97091
Printed in China

8239 210 97091 / Printed in China
OEMN02248/TD958UJ*****
Quick Use Guide (cont’d)
Quick Use Guide (cont’d)
Detailed playback features and additional functions are described in the
accompanying owner’s manual.
Playing a Disc
1Press STANDBY-ON 2to turn on the
TV/VCR/DVD.
2Press SELECT to put the unit in DVD mode. The
green DVD light will appear on the front of the
TV/VCR/DVD.
3Press OPEN/CLOSE /on the front of the
TV/VCR/DVD to open the disc tray. Put a Disc in
the tray with the label facing up and the shiny side
facing down.
4Press PLAY Bto close the tray. Playback may
start automatically. If not, press PLAY Bagain.
If a DVD Disc menu appears, use the 1 234, ENTER,
or Number buttons to select features or start playback.
Follow the instructions in the menu.
5To stop playing the Disc, press STOP 9.
Setting Up the TV/VCR/DVD the First Time
1Press STANDBY-ON 2to turn on the TV/VCR/DVD.
2Press ENTER repeatedly to select English, French, or
Spanish as the language for TV/VCR/DVD setup menus.
3Press 3or 4to select AUTO PRESET.Then press
ENTER to set up TV channels. When setup is complete,
the lowest TV channel will appear on the TV/VCR/DVD.
4To watch TV, press the CH. 3or 4button to select
memorized channels. Remember, if you are using a Cable Box
or Satellite Receiver, set the TV/VCR/DVD to channel 3 or 4.
Change channels at the Cable Box or Satellite Receiver.
- SET UP-
2 LANGUAGE
[ENGLISH] ESP FRA
AUTO PRESET
Playable Discs
The TV/VCR/DVD will play the following Discs.
DVDs must have a Region Code of ALL regions or Region 1.
DVDs must be recorded in the NTSC Color System.
1
ALL
Recordable
ReWritable
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
- B
REPEATSEARCH MODE CLEAR
MODE ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
1
2-3
4
PHILIPS
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
- B
REPEATSEARCH MODE CLEAR
MODE ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
1
54
PHILIPS
2
RL AUDIOVIDEOHEADPHONE
STANDBY-ON
SEARCH
NEXTPREV
PLAY F.FWDREW PLAYSTOP OPEN/CLOSE
REC/OTR
STOP/EJECT
VOLUME
DVD
DVD TV/VCR
SELECT
VCR
CHANNEL
3