Philips CCB 092AT User manual

%
ia
Im
Return
Card withi

Once your PHILIPS purchase is registered, you're eligible to receive all the privileges of owning a
PHILIPS product. So complete and return the IA,/arranty Registration Card enclosed with your
purchase at once. And take advantage of these important benefits.
PHILIPS
Congratulations on your purchase, and
welcome to the "family!"
Dear PHILIPS product owner:
Thank you for your confidence in PHELPS. You've selected one of
the best-built, best-backed products available today. And we'll do
everything in our power to keep you happy with your purchase
for many years to come.
As a member of the PHILIPS "family," you're entitled to protection
by one of the most comprehensive warranties and outstanding ser-
vice networks in the industry.
What's more, your purchase guarantees you'll receive all the infor-
mation and special offers for which you qualify, plus easy access to
accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising
commitment to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing in
a PHILIPS product.
Sincerely,
Robert Minkhorst
President and Chief Executive Officer
P,S, Remember, to get the most from your PHILIPS
product, you must return your Warranty
Registration Card within 10 days. So please mail
it to us right now!
Know these
safetysy bols
l& This "bolt of lightning" indi-
cates uninsulated material
within your unit may cause an
electrical shock. For the safety
of everyone in your household,
please do not remove product
covering.
,_The "exclamation point"
calls attention to features
for which you should read the
enclosed literature closely to
prevent operating and mainte-
nance problems.
WARNING: TO PREVENT
FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR
MOISTURE.
CAUTION: To prevent elec-
tric shock, match wide blade of
plug to wide slot, fully insert.
ATTENTION: Pour eviter les
choc electriques, introduire la
lame la plus large de la fiche
dans la borne correspondante
de la prise et pousser jusqu'au
fond.
For Customer Use
Enter below the Serial No.
which is located on the rear of
the cabinet. Retain this infor-
mation for future reference.
Model No.
Serial No.

Introduction 3
• QQOOOOOmm= =mmooooooeemmQQQooooomm= =mmooooooeemmQQQooooomm= =mmooooooeemmQQQooooomm= =mmooooooeemmQQQooooomm= =mm*
Welcome to your TV/VCR owner's manual.
This manual has seven sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations;
Recording Options; Playing Options; Additional Features; and Information You May Need. The instructions
explain all of the TV/VCR's features, which are listed below.
Features
A-B Repeat Play
Automatic Channel Setup
Automatic Head Cleaner
Automatic Operation Features
Automatic Tracking Adjustment
Blue Background
Daylight-Savings Time
Dew Sensor
High Quality (HQ) System
On-screen displays in English or Spanish
On-screen Menu Programming, accessible with
remote control or front panel buttons
One-Touch Recording
Real-Time Counter
Remote Control
Repeat Play
S-VHS Quasi Play Back (SQPB)
ShowGuard TM - Indefinite Timer Recording memory
Sleep Timer
SmartCIock TM
Special Effects Playback: Forward and Reverse
Searching; Still
Timer Recording
Wake Up Timer
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this
equipment to rain or moisture.
Federal Communications Commission (FCC) Warning: Any unau-
thorized changes or modifications to this equipment void the
user's authority to operate it.
This TVIVCR, equipped with a High Quality (HQ) system, is com-
patible with existing Video Home System (VHS) equipment.
Philips Consumer Electronics Company recommends that
you use only video cassette tapes that are labeled with the
mark. The use of other tapes may result in poor picture
quality and excessive deposits on the video heads, which may not
be covered by the warranty if damage occurs.
Note to the Cable TV System Installer: This reminder is
provided to call the Cable TV system installer's attention to
Article 820-40 of the National Electrical Code, which provides
guidelines for proper grounding - in particular, specifying that the
cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as possible.
Declaration of Conformity
Model Number: CCBO92AT
Trade Name: Philips
ResponsibleParty: PhilipsConsumer Electronics
P.O. Box 14810
Knoxville, TN 37914
[phone]
-\\ As an ENERGY STAR_ Partner, Philips Consumer
Electronics Company has determined that this product
meets the ENERGY STAR_ guidelines for energy efficiency.
ENERGY STAR_ is a U.S. registered mark.
Using products with the ENERGY STAR® label can save energy.
Saving energy reduces air pollution and lowers utility bills.
SmartCIock TM, SmartLock TM, and ShowGuard TM are trademarks of
Philips Consumer Electronics Company.
Copyright 2000 Philips Consumer Electronics Company. All rights
reserved.
Before doing anything else, record
the TWVCR's model and serial num-
ber_ in the spaces provided on page
two, These numbers will help us
assist you if you ever cal! for help,
Your new product, its packaging,
and this manual contain materials
that can be recycled and reused.
Specialized companies can recycle
your product to increase the
amount of reusable materials and
to minimize the amount that needs
to be properly disposed.
Your product uses batteries that
should not be thrown away when
depleted but should be disposed of
as small chemical waste.
Please find out about the local regu-
lations on disposal of your old prod-
uct, batteries, manual, and packag-
ing whenever you replace existing
equipment,

4 Tableof Contents
Setting Up Your TVNCR
Introduction .......................................................... 3
Table of Contents ...................................................... 4
Before Using the TV/VCR ................................................ 5
Hooking Up the TViVCR ............................................... 6-8
Turning On the TViVCR ................................................. 9
Language Selection .................................................... I0
Automatic Channel Setup ............................................ 11-12
Settingthe Clock ................................................... 13-18
Daylight-SavingsTime .................................................. 19
Time Zone .......................................................... 20
Description of Controls
Front Panel .......................................................... 21
Rear Panel ........................................................... 22
Remote Control Buttons ............................................. 23-24
Adjustingthe PictureControls ......................................... 25-26
On-Screen StatusDisplays .............................................. 27
Reminder ........................................................... 28
Basic Operations
Playing.............................................................. 29
Recording ........................................................... 30
Recording Options
One-Touch Recording ................................................. 31
Rerecording (Tape Duplication) .......................................... 32
Timer Recording ................................................... 33-36
Defeat Recording ..................................................... 37
Playing Options
Repeat Play .......................................................... 38
A-B Repeat Play .................................................... 39-40
Real-Time Counter Memory ............................................. 41
Playback Options ..................................................... 42
Additional Features
Blue Background ...................................................... 43
Sleep Timer .......................................................... 44
Wake Up Timer ...................................................... 45
Volume Bar .......................................................... 46
Automatic Operation Features ........................................... 47
Information You May Need
Specifications......................................................... 48
Glossary ............................................................ 49
HelpfulHints ...................................................... 50-51
Limited VVarranty ..................................................... 52
Index ............................................................... 53
Accessories .......................................................... 56

BeforeUsingtheTV/VCR5
Putting Batteries in the Remote Control
Remove the battery compartment lid on the bottom of
the remote control by sliding it in the direction of the
arrow.
Place two AA batteries inside the battery compartment
with their + and - ends aligned as indicated.
Replace the battery compartment lid.
Recording Prevention
Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.
To prevent accidental recording, break off the tab with a
screwdriver.
To record again, cover the hole with cellophane tape.
Using the Remote Control
_ Point the remote control at the TV/VCR's remote sensor.
® Do not put objects between the remote control and the
TV/VCR.
TV/VCR Maintenance
_ In this TV/VCR, use only tapes with thelV_q mark.
_, Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the TV/VCR.
Removable labels like these can jam the TV/VCR.
_, Periodic maintenance is required to maintain your TV/VCR's
excellent performance. This TV/VCR has an automatic head
cleaning system. However, the video heads will eventually
require cleaning or replacement. Only an authorized service cen-
ter should perform this service.
• The remote control and its batteries
are s@plied.
•Do not mix alkaline and man-
ganese batteries.
•Do not mix old and new batteries,

Hook up your TV/VCR using one of the connections shown.
Hooking Up Your TV/VCR With a
Cable Signal or Outdoor Antenna
Connect a Cable signal
or an antenna to the
ANT(enna) Jack.
Hooking Up Your TV/VCR
With aCable Box
To view any channel, set the TV/VCR to the
Cable Box output channel (channel 03 or 04).
Then, select channels at the Cable Box.
Connect the Cable signal to
the IN Jack on the Cable Box. \1
Connect an RF coaxial cable (75- "_
ohm, not supplied) to the OUT Jack |
on the Cable Box and to the .I.
ANT(enna) Jack on the TV/VCR. ou _.

Hooking Up Your TV/VCR With an
Indoor Antenna
To install a rod antenna (supplied), push the
stem of the antenna into the antenna hole on
the back of the TV/VCR. Connect the anten-
na wire to the ANT(enna) Jack on the back
of the TV/VCR as shown. Extend the antenna
and adjust its length, direction, and angle for
the clearest picture.
Connect the AC cord to the AC
120V jack on the back of the
TV/VCR. Plug the AC cord into
an AC power outlet.
Before you turn on the TV/VCR,
go to page nine. Helpful Hint
•Before connecting an antenna or cable signal to the
ANT(enna) Jack, make sure the pin is not bent. If the
pin is bent, straighten it as illustrated, then connect
the antenna or cable signal to the ANT(enna) Jack.
Bent pin
Crooked Pin _ _/
Plug
Straight Pin

8 Hookin9 UptheTV/VCR(cont'd)
•eeeemee =mmeeeeeeeeeeoooeeeeemee =mmeeeeeeeeeeoooeeeeemee =mmeeeeeeeeeeoooeeeeemee =mmeeeeeeeeeeoooeeeeemee =mmeeee
Mobile Connections
Usually, the supplied indoor rod antenna provides adequate reception. But when you want to watch TV
outdoors or in a vehicle, use a mobile antenna (not supplied) or an indoor dipole antenna (not supplied)
and a car battery cord (supplied) to get good reception.
Mobile Antenna
(not supplied)
Connect an antenna to the ANT(enna) jack. Refer to the
instructions with your mobile antenna to make a connection simi-
lar to this one.
Make sure your vehicle has a 13.2-volt, negative ground
electrical system. Connect one end of the car battery
cord to the DC 13.2Vjack on the back of the TV/VCR.
Then connect the other end of the car battery cord to the
cigarette lighter in your vehicle.
Fuse Replacement
(Car Battery Cord)
If the TV/VCR does not have power when connected properly in
your vehicle, you may need to replace the fuse in the car battery
cord.
Use only a 5-amp, 250-volt, fast blow fuse, which is available
at an electronics retailer.
To remove the old fuse, unscrew the red cap from the end of the
cord. Place your fingers on the grooved part of the cap and turn
the cap counter-clockwise.
When the cap is removed, the red cap and the silver tip will be
loose. The fuse will be loose inside the end of the cord.
Remove the old fuse and insert a new fuse.
Replace the red cap and the silver tip. The fuse will tighten into
place as you screw on the cap, turning the cap clockwise. (The
end of the fuse will fit into the silver tip, which is in the center of
the red cap when tightened.)
Helpful Hints
•Do not watch TV while driving.
•Use only the supplied car battery
cord, Using another cord could dam-
age the TV/_/CR,
•Make sure the cigarette lighter jack is
free of ashes and other debris,
•Make sure you push the car battery
cord's plug completely into the ciga-
rette lighter,
•Always unplug the car battery cord
from the cigarette lighter before you
unplug it from the TV/VCR.
•You must disconnect the car battery
cord from the TV/VCRbefore you can
use standard electrical (AC) power,
•If you use the TVA/CRwith the vehi-
de's engine off, recharge the vehicle's
battery every four hours, Unplug the
car battery cord from the cigarette
lighter when you finish using the
TV/QiCR,
• When you use the TVA/CRwith a car
battery cord, noise may appear on
the TV/VCRscreen,
•Do not use this TV/VCR in high tem-
perature conditions,

TurningOntheTV/VCR9
• mmeeeoome= :::::::::::::::::::::::: :::::::::::::::::::::::: :::::::::::::::::::::::: :::::::::::::::::::::::: =mmo
Before you turn on the TV/VCR, make sure batteries are in the
remote control and the TV/VCR is hooked up correctly
The instructions on this page work only when you turn on the
TV/VCR for the first time
Press the POWER button. The TV/VCR will come on and the
screen shown below will appear.
SELECT LANGUAGE El
> ENGLISH ON
ESPANOL
SELECT Ai,V OR
SSMENU TO CONTINU
Press the PLAY/A button or the STOP/T button to select
English or Spanish on-screen displays and menus.
Press the MENU button. The screen shown below will appear.
ToC_NNECTTvcRANTENNA ORCABLF_'_
THEN PRESSI_
END PRESSEXIT
Press the F.FWD/I_ button to begin automatic channel
setup. The TV/VCR will memorize all available channels. When
channels are set, CHANNELS ARESETwill appear on the screen
briefly. Then the TV/VCR will go to the lowest channel pro-
grammed.
(If you try to set up channels when there is no antenna or cable
connected to the TV/VCR, programming will appear to take place,
but eventually a NO TV SIGNALS ... message will appear on the
screen. Connect an antenna or cable to the ANT(enna) jack on
the TV/VCR, then press the F.FWD/I_ button again. You may
need to follow the steps on page 11 instead.)
Use the CH(annel) A/_ button or the Number buttons
on the remote control to select a TVNCR channel. Use
the VOL(ume) A/_button to adjust the sound.
•If you do not see any onscreen dis
plays when you rum on the TV/VCR,
check your hookups, then try again
If you still do not see any onscreen
displays, follow the steps on pages
70-77 to select a language and set
up channels
•To skip step 2, press the MENU
button All onscreen displays will be
in English To skip step 4, press the
STATUS/EXIT button Channels will
not be set up, and CHANNELS
NOT SETwill appear on the screen
briefly
• You cannot set up channels if you
are using a Cable Box
• Line Input mode will always be
stored in the TWVCRsmemory as
channel O0 When you select chan-
nel 00, A/V IN will appear on the
screen briefly Press the CH(annet)
A/_ button or the Number but
tons to select another channel

Press the MENU button.
Press the PLAY/A button or the STOP/V button to select
PRIM. SETUP. Then, press the F.FWD/I_ button.
Press the PLAY/A button or the STOP/V button to
choose SELECT LANGUAGE. Then, press the F.FWD/I_
button.
I SELECT AV> ENGLISHToESPANoLSELECTLANGUAGEEND PRESS EXITON 1
J
Press the PLAY/A button or the STOP/V button to select
ENGLISH or ESPAKIOL (Spanish).
Press the STATUS/EXIT button.
Helpful Hint
•If you accidentally select Spanish
and need English on-screen displays
and menus:
1) Press the MENU button.
2) Press the PLAY/A button or the
STOP/v button to select PREPARA-
CION, then press the F,FWD/i_
button.
3) Press the PLAY/A button or the
STOP/v button to select SELEC-
CIONIDIOMA, then press the
F.FWD/I_ button.
4) Press the PLAY/A button or the
STOP/_ button to select ENGLISH.
5) Press the STATUS/EXIT button.

AutomaticChannelSetup 1
AUthough the 1-ViVCR may automatically memorize the channeUs
you receive when you turn it on for the first time, you may set up
channeUs again by following the steps beUow, _ @
Press the MENU button.
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
\
Press the PLAY/A button or the STOP/V button to select
PRIM. SETUP, then press the F.FWD/I_ button.
PRIMARY SETUP N]_
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [O
_._ SET CLOCK /
SELECT _,V CHOOSE I_
O END PRESS EXIT
Press the PLAY/A button or the STOP/V button to select
AUTO PROGRAMMING, then press the F.FWD/I_ but-
ton. AUTO CH PROGRAMMING _. will appear on the screen.
The TVNCR distinguishes between TV channels and cable chan-
nels automatically, and the TVNCR will memorize its available
channels.
J
Wait for the TV/VCR to set up
channels.
Wait for a few minutes. When setup is complete, CHANNELS
ARE SET will appear on the screen. Then the programming of the
lowest channel number placed in the TV/VCR's memory will
appear on the screen. Now, when you press the CH(annel) A/_
button, you will scan only through channels you receive.
Helpful Hint
•Line Input mode will always be
stored in the TWVCR'smemory as
channel 00. You cannot delete it.

12 AutomaticChannelSetup(cont'd)
• eeeeeee =mmeeeeeeeeeeeeeeeeeeeee =mmeeeeeeeeeeeeeeeeeeeee =mmeeeeeeeeeeeeeeeeeeeee =mmeeeeeeeeeeeeeeeeeeeee =mmeee*
AddinglDeleting Channels
Press the MENU button.
/_[OI_DIUSTPRESS./_- -'_
EXIT
PRIM. SETUP
_T_u_AMI/VCRPROGRAM
VCR SETUP
Press the PLAY/A button or the STOP/v button to select
CHANNEL.
01 pTPRESS"'"
EXIT
PRIM. SETUP
_Rilui_AMI/VCRPROGRAM
VCR SETUP
Press the CH(annel) Atk7 button to select the channel
you want to add or delete.
/_TTO ADJUST PRESS_1/I,,- _'_
CH23 _ ]
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
Press the F.FWD/I_ button or the REW(ind)/_l button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
Repeat steps 3-4 to add or delete other channels.
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
To review the channels memorized
by the TV/VCR,follow these steps.
7) Pressthe MENU button.
2) Press the PLAY/A button or the
STOP/V button to select PRIM.
SETUP. Press the F.FWD/I_ button.
3) Pressthe PLAY/A button or the
STOP/V button to select CH MEM-
ORYREVIEW. Press the F.FWD/I_
button. A list of programmed chan-
nels will appear on the screen.
4) If all the programmed channels
don't fit on the screen, press the
F.FWD/I_ button. If you do not
press the F.FWD/I_ button within
70 seconds, the remaining channels
will appear on the screen. (If there
are no remaining channels, the pre-
vious menu will appear.) Or press
the REW(ind)/_l button to see the
previous screen of channels.
5) Pressthe STATUS/EXIT button
once or twice.

There are three ways to set the clock: Manually, with Automatic
PBSChannel Selection, or with Manual PBS Channel Selection.
With manual clock setting, you tell the TV/VCR the current time.
With Automatic or Manual PBS Channel Selection, the TVNCR
gets the time from your local PBS station.
If you use either Manual PBS Channel Selection or Automatic PBS
Channel Selection, follow the steps on page 20 to have the
TV/VCR maintain the clock according to your Time Zone.
Cable Box users must set the clock manually.
To set the clock manually, follow the steps on pages 13-14. To set
the clock using Automatic PBS Channel Selection, follow the steps
on pages 15-16. To set the clock using Manual PBS Channel
Selection, follow the steps on pages 17-18.
Before you begin, make sure:
,:_,The TV/VCR is hooked up and turned on.
,_;Channels are set up.
,_ You make each entry within 60 seconds of the previous entry.
Manual Clock Setting
Press the MENU button.
S
IPRIM. SETUP i
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
9,
ooo
QQG
S_EED _ L
OQ
-.. j
Press the PLAY/A button or the STOP/V button to select
PRIM. SETUP. Then, press the F.FWD/I_ button.
/_ RIMARY SETUP N]_
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [O
SET CLOCK /
SELECT _.V CHOOSE
0 END PRESS EXIT
Press the PLAY/A button or the STOP/V button to select
SET CLOCK. Then, press the F.FWD/I_ button.
,ON
ZONE
O CONTINUE PRESS MENU
SELECT AV CHOOSE I,,-
O END PRESS EXIT
Entries that do not match the
TWVCR'scalendar wfl! cause a
question mark (?) to appear on the
screen,
Tomake corrections whi!e yOU are
setting the clock, press the CLEAR
button unti! the space for the num-
ber you want to correct is flashing,
Then enter the correct number,

14 SettingtheClockIcont'd)
• • ••• ••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••••••••••••••••••••••••••• ••••••e•
If ON appears beside AUTO CLOCK, press the F.FWD/I_
button so that OFF appears to the right of AUTO
CLOCK, then press the MENU button. If OFF appears
beside AUTO CLOCK, press the MENU button.
SET MANUAL CLOCK
I TIME - -
DATE - - /--/....
END PRESS EXIT
Press two Number buttons for the hour(s) and two
Number buttons for the minute(s). Then press 1 for AM
or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
SET MANUAL CLOCK
I TIME 09 : 30 PM
MONTH .;_- - /....
TO CORRECT PRESS CLEAR
END PRESS EXIT
Press two Number buttons for the month, two Number
buttons for the day, and two Number buttons for the
year. For example, for July 1, 2000, press 07, 01, 00. The day of
the week will appear automatically.
SET MANUAL CLOCK
TIME 09 : 30 PM
DATE 07 /01 /2000
SATURDAY
TO CORRECT PRESS CLEAR
END PRESS EXIT
,,J
Press the STATUS/EXIT button.

SettingtheClock(cont )
Automatic PBS Channem Semection
Press the MENU button.
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
ICTURE
Press the PLAY/A button or the STOP/V button to select
PRIM. SETUP. Then, press the F.FWD/I_ button.
PRIMARY SETUP N_" _
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [O
SET CLOCK )
SELECT ,ILV CHOOSE I_
O END PRESS EXIT
Press the PLAY/A button or the STOP/V button to select
SET CLOCK. Then, press the F.FWD/I_ button.
Ii SET CLOCK _'
TmO# LOCK
[AUTO]
O CONTINUE PRESSMENU
SE Et.m CE OO [T"
OQ
If ON appears beside AUTO CLOCK, press the MENU
button. If OFF appears beside AUTO CLOCK, press the
F.FWD/I_ button so that ON appears to the right of
AUTO CLOCK, then press the MENU button.
f AUTO CLOCK _'_
AUTO CLOCK USES
PBSCHANNEL DATA
> SET PBS CH. AUTO
SET PBSCH MANUAL
SELECT _._ CHOOSE I_-
O END PRESS EXiT

Press the PLAY/A button or the STOP/I' button to select
SET PBS CH. AUTO. Then, press the F.FWD/I_ button.
SET AUTO CLOCK
IO TIME - _ : - _
DATE - - /- - /....
NOW SEARCHING
END PRESSEXIT
NOW SEARCHING flashes on the TV/VCR screen.
When the TV/VCR finds the PBS channel, the time will
appear on the screen. Press the STATUS/EXIT button.
AT AUTOCLOCK
I TIME 06 : 30 PM
DATE 07 /01 /2000
SATURDAY
\ TO END PRESSEXIT
,',_;If CANNOT FIND CLOCK DATA flashes on the TV/VCR
screen, you will be prompted to turn off the TVNCR.
Turn off the TV/VCR. Leave it off for several minutes. When
you turn on the TV/VCR again, the clock will be set.
SET AUTO CLOCK _'_
TIME - - : - -
DATE - - /- - /....
CANNOT FIND CLOCK DATA
END PRESSEXIT
Wait for the TV/VCR to find
the time.
° iD
G3 CE)
GEE)
SPEED
OO
_E_OTR _ T_CmNG _ _JTE
0000
J
Helpful Hints
•Todisplay the time on the TV/VCR
screen, press the STATUS/EXITbut-
ton. Details are on page 27.
• You cannot use the AUTO CLOCK
feature if you don't receive aPBS
channel that carries atime signal in
your area. Set the clock manually.
• Automatic clock setting is not possi-
ble with a mobile connection.

SettingtheClock(conrad)
Manuam PBS Channem Semection
Press the MENU button.
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
ICTURE
Press the PLAY/A button or the STOP/V button to select
PRIM. SETUP. Then, press the F.FWD/_ button.
PRIMARY SETUP N]_
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [O
S SET CLOCK )
ELECT _.v CHOOSE I,,-
_TO END PRESS EXIT j
Press the PLAY/A button or the STOP/V button to select
SET CLOCK. Then, press the F.FWD/I_ button.
# SET CLOCK N]_
|,AUTO, |
_T O CONTINUE PRESSMENU J
J
If ON appears beside AUTO CLOCK, press the MENU
button. If OFF appears beside AUTO CLOCK, press the
F.FWD/I_ button so that ON appears to the right of
AUTO CLOCK, then press the MENU button.
AUTO CLOCK "_
AUTO CLOCK USES
PBS CHANNEL DATA
> SET PBS CH. AUTO
SET PBS CH MANUAL
SELECT AV CHOOSE I,-
O END PRESS EXIT

18 SettingtheClock(cont'd)
•eeeemee =mmeeeeeeeeeeoooeeeeemee =mmeeeeeeeeeeoooeeeeemee =mmeeeeeeeeeeoooeee,,,e= =mmeeeeeeeeeeoooeeeeemee =mmeeee
5
Press the PLAY/A button or the STOP/V button to Wait for the TV/VCR to
select SET PBS CH. MANUAL. Then, press the F.FWD/I_ find the time.
button.
TO CLOCK (PBS) CH 02 "_
TIME - - : - - /
/
DATE - - /- - /....
SELECT CHANNEL NUMBER
END PRESSEXIT
Use the Number buttons to select your PBS station.
T0CLOCK/_BS_CH12
TIME - - : - - |
j
DATE - - /- - /....
NOW SEARCHING
END PRESSEXIT
\ J
NOW SEARCHING flashes on the TV/VCR screen.
When the TV/VCR finds the clock data, the time will
appear on the screen. Press the STATUS/EXIT button.
TIME 06 : 30 PM
DATE 07 /01 /2000
SATURDAY
END PRESSEXIT
._;If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen and you know another PBS channel,
press the PLAY/A button or the STOP/V button to
choose SELECT NEW PBS CH. Then, press the
F.FWD/I_ button. Repeat step 6.
._; If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen and you do not know another channel,
press the PLAY/A button or the STOP/V button to
select SET PBS CH. AUTO. Then, press the F.FWD/I_
button. The TV/VCR will search for the PBS channel automati-
cally.
•If the PBS channel is found, the time will appear on the screen.
•If the PBS channel is not found, you will be prompted to turn
off the TV/VCR. Leave it off for several minutes. When you turn
on the TV/VCR again, the time will be set.
©
Helpful Hints
•If you have an Antenna hookup, you
may select channels 2-69 at step 6.
If you have a cable connection, you
may select channels 1-125 at step
6. Details about available memo-
rized channels are on page 12.
•Todisplay the time on the TV/VCR
screen, press the STATUS/EXITbut-
ton. Details are on page 27.

Daylight.SavingsTime 19
When the Daylight-Savings Time feature is ON, the TV/VCR clock
will automatically move forward one hour on the first Sunday in
April and move back one hour on the last Sunday in October.
To turn Daylight-Savings Time ON or OFF, follow the steps
below.
Press the MENU button.
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
ICTURE
Press the PLAY/A button or the STOP/V button to select
PRIM. SETUP. Then, press the F.FWD/_ button.
'f RIMARY SETUP N]_
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [0
LSI SET CLOCK #
SELECT AV CHOOSE I_
0 END PRESS EXIT
Press the PLAY/A button or the STOP/V button to select
SET CLOCK. Then, press the F.FWD4_ button.
_>> SETCLOCK ON_"_]
2u?°c_c_LocK_
|,AUTO, |
O CONTINUE PRESSMENU J
SELECT AV CHOOSE I_
0 END PRESS EXIT
o......6_ 6
J
Press the PLAY/_ button or the STOP/V button to select
DAYLIGHT SVG.TIME. Then, press the F.FWD/I_ button
so that ON or OFF appears beside DAYLIGHT SVG.
TIME (Daylight Savings Time).
Press the STATUS/EXIT button.

20 TimeZone
When you set the clock using AUTO CLOCK, specify },our time zone,
The TViVCR will maintain the clock according to your time zone,
Press the MENU button.
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
Press the PLAY/A button or the STOP/V button to select
PRIM. SETUP. Then, press the F.FWD/_ button.
PRIMARY SETUP N]_
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [O
_ T SET CLOCK /
SELECT AV CHOOSE I_
O END PRESS EXIT
Press the PLAY/A button or the STOP/V button to select
SET CLOCK. Then, press the F.FWD/I_ button.
_> SETCLOCK ON]_
|,AUTO, |
o CONTINUE PRESSMENU /
SELECT AV CHOOSE I_
O END PRESS EXIT
Press the PLAY/_ button or the STOP/V button to select
SET TIME ZONE. Then, press the F.FWD/I_ button.
_SSET TIME ZONE
> AUTO [ON]
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
SELECT AV
TO CONTINUE PRESS MENU
Press the PLAY/_ button or the STOP/V button to select
your time zone.
Press the MENU button, then press the STATUS/EXIT
button.
Helpful Hints
If you select AUTO at step 5, the
TV/VCRwil! set the clock according
to the time zone data of the PBS
station it finds.
• You cannot select SETTIMEZONE
at step 4 if AUTO CLOCK is set to
OFF.