Philips 28PW960B/58 User manual

1
English
About this handbook
This is a handbook to help you with the installation and operation of
your new menu TV.
With a menu TV, menus can be called up on the screen. These menus
provide information either about operations to be carried out or about
functions you can select.
This handbook consists of two parts :
Installation
This part helps you with installing your TV,
selecting your menu language, locating and
storing your TV channels and composing
your favourite list of programme numbers.
To do this, follow the directions of the
SYSTEM INSTALLATION menu very closely.
The installation menu is shown as it will
appear on your screen.
Operation
After you have stored the TV channels, you
can call them up on the screen. You can
adjust the picture and sound via the main
menu. The MAIN MENU is shown here as it will
appear on the screen. Feel free to try out all
the different possibilities of your TV. Use this
part of the handbook to help you do this.
MAIN MENU 2
a ■ recording source
b
■ system installation
c
■ >>>>>
select : a-c menu off
MAIN MENU 1
a ■ picture
b
■ sound
c
■ programme list
d
■ special features
e
■ >>>>>
select : a-e menu off
SYSTEM INSTALLATION
a ■ language
b
■ tv installation
c
■ photo CD/CD-I
select : a-c menu off
4This circle in front of a sentence indicates that you have to do
something.
5This arrow in front of a sentence indicates the result of what you have
done.
In the stripe under each menu you are told which keys you can press
and how you can switch the menus off again.
Contents
Installation
Preparation.......................................................3
Switching TV on...............................................4
Selecting your Menu language.......................5
Searching for and Storing TV channels :
- Automatic ..................................................6
- Manual .......................................................7
Operation
Operation........................................................14
Main Menu .....................................................15
Other Functions..............................................20
Pip Picture in Picture......................................24
Teletext ...........................................................26
Peripheral Equipment....................................29
Tips..................................................................35
Index ..............................................................36
English

2
TVVCR
TUNER CD TAPE
12
SAT LD
pt
s
r
adfgb
h
hK
L
0K
L
F
G
B
J
MeAK
L
FH
MENU
KL
a
b
c
d
e
TV MC
off
123
456
789
0K
L
c0
K
2
a
L
satellite selection in
combination with a
satellite tuner only
standby - switch-off
picture format
. programme selection
. favourite TV channel
selection
digit keys
previous programme
video recorder function
P
0...9
2
3
temporarily switch off
the sound
volume key
c
a
txt on/off
stop seeking txt page
solution to riddles
interrupt txt page
mix txt and tv picture
enlarge
time display
switch pip on/off
select connections
switching screens
still picture
moving pip screen
p
q
r
s
t
stop
play
record
rewind
wind
programme timer
L
B
M
G
F
N
personal preference
on screen info
bilingual choice
brightness
M
J
e
A
enter or leave a menu
selection of your
choice in the menus
switch off all menus
a...e
a
d
f
g
b
h
m
F
H
u
freeze the picture
noise reduction
mosaic screen
(for TV sets with PiP)
TV selection
source selection
connect
TV
M
C
off
MENU
Source selection
PiP - picture in picture
(for TV sets with PiP)
TXT - Teletext
Menu
Other functions
Video recorder
B
E
m
L
N
q
u

3
English
1
1Preparation
Place the TV on a solid surface.
For ventilation, leave a space of at least 5 cm free all around the set.
This TV requires a mains voltage of 220 V - 240 V.
Insert the aerial plug tightly into the aerial socket gat the back
of the TV with an aerial cable of good quality.
You can improve the picture quality by using the suppressor-
aerial-cable supplied.
Remote control
This remote control has been developed to operate your TV.
However some main functions of your audio and video equipment from
our product programme are controllable as well.
Tear off the label, written in your language from the label sheet,
supplied with these instructions, click it onto the inside surface of the
door of the remote control.
Remove the cover of the battery compartment on the back of the
remote control.
Insert the 2 batteries supplied (type R03G-1,5V).
Click the cover back into place.
The Philips batteries supplied with the remote control unit of your new
TV set do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries exhausted batteries may not be
disposed of with your household waste.
Please ensure you are aware of any local regulations governing the
disposal of exhausted batteries.
4Press the TV key below the display.
5In the window of the remote control the letters TV appear in a
grey block.
You can now operate your TV with your remote control.
Go on to 2.
MC
TV
VCR
TUNER CD TAPE
12
SAT LD
TV
CABLE
Insert the mains plug in the wall socket.
Installation

4
2
2
5A green or red lamp lights up on the front of
your TV set.
green .........................................................or
5The TV is switched on.
The screen lights up.
Go on to 3.
red .............................................................
The TV is switched on but the screen stays
dark. Your TV is on standby.
4Press a digit key on the remote control.
5The green lamp lights up and blinks every
time you press a key on the remote control.
5The TV switches on.
The screen lights up.
Go on to 3.
A
A
Switching TV on
4Press the switch Aon the left side of your TV set.

5
English
Selecting your menu language
You can choose for yourself the language of the menus - the instructions and the
various possible choices - which you call up on your screen.
4Press the INSTALL key on the right side of your TV set.
If the message CHILD LOCK ON appears, the child lock should be switched
off. See Special Features, p. 18.
5The SYSTEM INSTALLATION menu appears on the screen.
It is also possible to enter the installation menu via the main menu.
See Main Menu, p. 15.
4Press the red key a on the remote control.
5The language menu appears on the screen.
4Press the colour key of your language choice.
4Press the corresponding colour key for >>>>> if the language you
want does not appear on the first language menu.
5LANGUAGE STORED appears for a moment at the top of the menu.
The language menu disappears and the SYSTEM INSTALLATION menu
appears again.
From this point on, all menus are presented in the language of your
choice.
Go on to 4.
Have you pressed the wrong key ?
Press the red key a for language again and make a new choice.
SYSTEM INSTALLATION
a ■ language
b
■ tv installation
c
■ photo CD/CD-I
select : a-c menu off
3
3
INSTALL
PROGRAM
n
VOLUME
a ■ ENGLISH
b
■ Deutsch
c
■ Français
d
■ Italiano
e
■ >>>>>
select : a-e menu
a ■ Español
b
■ Nederlands
c
■ Português
d
■ Svenska
e
■ >>>>>
select : a-e menu
a ■ Norsk
b
■ Suomi
c
■ Dansk
d
■ ENGLISH
e
■ >>>>>
select : a-e menu
Installation

6
SYSTEM INSTALLATION
a ■ language
b
■ tv installation
c
■ photo CD/CD-I
select : a-c menu off
4
4Searching for and storing
TV channels
After you have switched on your TV and selected your menu language,
you can search for and store your TV channels.
This can be done in two different ways : automatically or manually.
TV INSTALLATION
a ■ automatic
b
■ manual
c
■ programme name
d
■ programme sort
e
■ preselection preferences
select : a-e menu off
Automatic installation....................................
All TV channels are searched for and stored
automatically. As far as it is transmitted by
the cable company a programme number
and a name are attributed automatically as
well as filled in the programme list.
If desired you can modify the allocation of
the channel numbers and the name of one
or more stored TV channels afterwards and
delete or insert TV channels.
Manual installation.........................................
The manual installation is characterised by
the possibility to select the way of searching
with frequencies.
You yourself must assign a number and a
name of your choice to the TV channel
located.
Follow very closely and step by step the
instructions of the Manual Installation
procedure.
You must go through every step.
Go on to page 7.
or
4Press the green key b in the SYSTEM INSTALLATION menu.
5The TV INSTALLATION menu appears.
Automatic installation
4Press the red key a.
5AUTOMATIC lights up.
4Press MENU + to select YES.
5SEARCHING, PLEASE WAIT appears and the TV is searching all the channels
you can receive.
The automatic installation can be interrupted by pressing the
MENU or OFF key.
5Every time a channel is found it is automatically stored in the memory
under the next programme number in the programme list.
5When all channels are found the message TV INSTALLATION COMPLETED is
displayed briefly on top of the menu.
The programme list is automatically filled with all the programme
numbers of the TV channels transmitted.
When a cable company is recognised which transmits a teletext page
with the frequencies and the programme names of all the TV channels
which can be received, the searching is stopped and a programme list
appears.
The programme list is automatically filled with all the programme
numbers and names of the TV channels transmitted.
It is possible that the cable company displays an own broadcasted
selection menu. Layout and items are defined by the cable company.
Make your choice of the presented teletext pages by entering the
corresponding digit key.
5The menu TV INSTALLATION appears again.
Go on to 5, page 9.

7
English
a
a
Installation
step Searching for a TV channel
step Selecting the TV system
The television picture is not broadcast in the same way in all countries.
We speak of different television systems (PAL, SECAM, NTSC, ....).
Now you must select the TV system yourself.
Manual TV installation
4Press the green key b in the menu TV INSTALLATION.
5The menu MANUAL TV INSTALLATION appears.
MANUAL TV INSTALLATION
a ■ system
b
■ search
c
■ programme
d
■ store
select : - + a-d 0-9 menu off
4Press the red key a.
5The SELECTING THE SYSTEM menu appears.......
1You have your own aerial.
4Press the colour key of the country or part of
the world from where you want to select the
TV channel.
5The MANUAL TV INSTALLATION menu now
appears.
5Your selection lights up.
2You are connected to the cable system.
4Press the colour key of the country or part of
the world where you now are located.
5The MANUAL TV INSTALLATION menu now
appears.
5Your selection lights up.
Go on to step b.
ONLY ONE SYSTEM AVAILABLE appears ................
You have a set that can receive only one
system.
You do not need to make any selection.
Go on to step b.
or
4Press the green key b.
5SEARCHING appears and the TV is searching for a channel.
5The frequency increases until a channel is found.
Go to step cif you want to store the channel that has been found.
4Press Junder the door of the remote control to recognise which
programme is being broadcast.
5The MANUAL TV INSTALLATION menu disappears temporarily.
Do you want a different channel or is the reception poor?
4Press the green key b again.
Is the reception still poor? See Tips, p. 35.
Fine-tuning :
You may be able to improve the reception of picture and sound of a TV
channel. Adjust the frequency yourself with the MENU - or + key on the
remote control.
Direct selection of a TV channel :
If you know the frequency of a TV channel, you can enter it directly with the
digit keys on the remote control and in this way call up the TV channel.
Ask for a list of the frequencies at your cable company or at your dealer.
4Enter the 5 digits of the desired frequency.
4For frequencies under 100 MHz, first enter a 0. For example : 063.25.
Have you entered a wrong number?
First complete the frequency with arbitrary numbers and then start again.
Go on to step c.
If you have pressed the wrong key, then repeat step a.
b
b

8
step Entering the programme number
Now you must assign a number of your choice to the TV channel
located. In this way you decide for yourself the order of all your TV
channels.
With the assigned programme number you can call up your TV channel
again later.
4Press the yellow key c.
5Hold down the P- or + key or use the digit keys on the remote control
until the desired programme number appears in the menu.
Go on to step d.
step Storing steps a to c
Now the TV system, the located TV channel and its programme number
must be stored in the memory.
4Press the blue key d.
5PROGRAMME STORED appears briefly at the top of the menu.
5The TV channel is stored in the memory.
Do you want to store another TV channel?
4Repeat steps a to d.
Are you connected to the cable system?
4Begin immediately with step b. You have already selected the TV
system in step a for all channels.
Have you finished locating TV channels?
4Press MENU.
5The TV INSTALLATION menu appears again.
Go on to 5.
repeat
out
c
c
d
d

9
English
5
5Entering or modifying a
programme name
It is possible that to change the name transmitted by the broadcaster or
to assign a name to the TV channels of which no name is filled in yet.
A name of maximum 5 letters or numbers can be given to the
programme numbers 0 to 99. For example SUPER, BBC1, ...
4Press the yellow key c.
5The PROGRAMME NAME menu and the programme list appear.
Also the frequency of the current TV channel is displayed.
4Press Junder the door of the remote control to recognise which
programme is being broadcast.
5The menu PROGRAMME NAME disappears temporarily.
4Press the red key a.
4Select the TV channel of which you want to change the name or to
which you want to assign a name with the digit keys or with P- or +.
External sources can not be selected with P- or +.
In the list you can now modify or enter the name of the TV channel.
With the arrow under the letter and number line you select which
letter or number in the list above you wish to enter .
In the list there is a red or white block next to the chosen programme
number.
4Hold as desired , either the green key b down to move the arrow to
the left, or else the yellow key c to move the arrow to the right.
5The letter or number that you indicate with the arrow appears in the
block.
4Press the blue key d.
5The block moves over one space.
Now you can choose a following letter or number with the arrow.
4Place the arrow between Z and 0 for a space.
Did you fill in a wrong letter or number?
Press repeatedly on the blue key d until the block is back in the place
where you want to make a change.
Now choose with the arrow the correct letter or number.
Are the complete names filled in?
4Press MENU.
5The TV INSTALLATION menu appears again.
Go on to 6.
Installation
pr.name pr.name pr.name
01020
1 ... 11 21
21222
31323
41424
51525
61626
71727
81819
91929
frequency : xxx.xx MHz
ABCDEFGHIJK....XYZ 012345...89
≠
a ■ programme number
b
■ A ¨ 9
c
■ A Æ9
d
■ next character
select : a-d 0-9 menu off
E
PROGRAMME NAME

10
6
6Modifying the programme list
According to your preference you can modify the programme list of the
stored TV channels by swapping, deleting or inserting certain TV
channels.
4Press the blue key d.
5The PROGRAMME SORT menu appears.
a. swap
With the swap-function you can modify the allocation of the stored
TV channels.
4Press the red key a.
5FIRST SELECTION lights up.
4Select the programme number of the TV channel of which you want to
modify the programme number with the digit keys or with P- or +.
4Press the green key b.
5SECOND SELECTION lights up.
4Select the programme number of the TV channel which you want to
swap with the programme number selected in your first selection.
4Press the yellow key c.
5PROGRAMMES SWAPPED appears briefly at the top of the menu.
5The TV channels and their names selected in the first and the second
selection are swapped.
4Repeat this for all the other TV channels you want to replace.
b. delete
With the delete-function you can remove the TV channels you do not like
to have in the programme list anymore.
4Select, with the digit keys or with P- or +, the programme number you
want to delete .
4Press the blue key d.
5DELETE lights up and the programme number and name of the TV channel
to be deleted starts flickering in the FIRST or SECOND SELECTION line.
4Press MENU + to select YES.
5DELETING PROGRAMME appears briefly at the top of the menu.
5The selected TV channel is deleted , its place is taken by the next
programme and the subsequent programme numbers are shifted up one
place.
4Repeat this for all the other TV channels you want to delete.
pr.name pr.name pr.name
01020
1 .... 11 21
21222
31323
41424
51525
61626
71727
81819
91929
a ■ first selection
b
■ second selection
c
■ swap
d
■ delete
e
■ insert
select : a-e menu off
PROGRAMME SORT

11
English
Installation
c. insert
You can add a TV channel at the place you like in the programme list
with the insert-function of the programme sort menu.
4Press the red key a.
5FIRST SELECTION lights up.
4Select, with the digit keys or with P- or +, the programme number where
you want to create an empty place to insert a new TV channel.
4Press the white key e.
5INSERT lights up.
4Press MENU + to select YES.
5INSERTING PROGRAMME appears briefly at the top of the menu.
5All the programmes starting from the one indicated in the programme
list are shifted one place downwards.
The programme number of the empty place appears in red.
You can now insert a new TV channel with the MANUAL TV INSTALLATION
method. See earlier.
Are all the TV channels allocated as you like ?
5Press MENU.
5The TV INSTALLATION menu appears again.
Go on to 7.

12
Favourite TV channels
a
a
4Press the white key e in the TV INSTALLATION menu.
5The PRESELECTION PREFERENCES menu appears.
4Press the red key a.
5PROGRAMME NUMBER lights up.
4Select the programme number of a TV channel with P - or + or with the
digit keys.
4Press the green key b.
5FAVOURITE STATUS lights up.
4Press MENU - or + to select NO or YES.
In this way you decide whether you want to keep the selected TV
channel as a favourite TV channel or not.
4Repeat this for each programme number.
Decoder
b
b
In case you have connected a decoder, see Decoders p. 32, you can
define one or more programme numbers as a decoder preselection.
4Press the red key a in the PRESELECTION PREFERENCES menu.
5PROGRAMME NUMBER lights up.
4Select the programme number under which you want to store the
programme coming from your decoder with P - or + or with the digit
keys.
4Press the yellow key c.
5DECODER lights up.
4Press MENU - or + repeatedly until the designation EXT1 or EXT2 appears
according to the euroconnector to which you connected your decoder.
This is not possible with a decoder connected to EXT3.
Select NO if you do not want the selected programme number being
activated as a decoder preselection.
4Press MENU twice.
5The SYSTEM INSTALLATION menu appears again.
7
7Preselection preferences
All the stored TV channels have been automatically placed into the
programme list. In the PRESELECTION PREFERENCES menu you yourself
should indicate for each stored TV channel if you want to keep that
programme number as a favourite.
You can do this also for a programme number you want to reserve for
the programmes you receive from your decoder.
This will make selecting your favourite TV channels a lot easier and
faster.
When you run quickly through the TV channels by holding the P- or +
key pressed down, only those TV channels which are in the favourite
list will be displayed.
When you select a TV channel with the digit keys, the indication of the
selected TV channel will be displayed in white characters when it is a TV
channel from the favourite list, in red characters when it is a TV channel
which is not in the favourite list.
TV INSTALLATION
a ■ automatic
b
■ manual
c
■ programme name
d
■ programme sort
e
■ preselection preferences
select : a-e menu off
PRESELECTION PREFERENCES
a ■ programme number
b
■ favourite status
c
■ decoder
select : a-c 0-9 menu off

13
English
Photo CD/CD-I
In case you have connected a photo Compact Disc or a Compact Disc
Interactive see Peripheral Equipment, p. 30 :
4Press the yellow key c in the SYSTEM INSTALLATION menu.
5PHOTO CD/CD-I lights up.
4Press MENU + to select YES.
5This offers you an optimum picture quality for your Photo CD or CD-I.
4Press off to exit the SYSTEM INSTALLATION menu.
8
8
Installation

14
Operation
The letters TV in the display of the remote control
must be in a grey block if you want to operate
your TV.
If this is not the case, first press the TV key under
the display.
Every time you press a key on the remote control,
the green lamp on the front of your TV set blinks.
Switching TV on
4Press A on the left side of your TV.
5A green lamp lights up. PR1 appears briefly and possibly also the
programme name.
5Does a red lamp light up ?
Your TV is on standby. Read on.
Standby
4With the standby key B at the top of the remote control you can
temporarily switch the TV off.
5The red lamp on the TV lights up.
4Press the C-key or a digit key in order to turn the TV on again.
If for a period of 10 minutes no aerial signal is received, then your set
automatically switches to standby.
Your TV consumes energy in the standby mode. Energy consumption
contributes to air and water pollution. We advise you to switch off your
TV overnight instead of leaving it on standby. You save energy and the
picture tube is demagnetised which supports good picture quality.
Selecting TV channels
4Select the TV channel with the digit keys on the remote control.
4For a two-digit programme number, enter the second digit within 2
seconds.
4If you want to know which channel you are watching, open the door of
the remote control and press J short.
Quickly run through the TV channels from the Favourite list.
4Hold the P- or + key pressed down.
Volume control
4Press a - or +.
Temporarily interrupt the sound
4Press c.
5The sound is temporarily interrupted.
4Press c again to get the sound back.
TV MC
123
456
789
0
0LK
LK
a
c2
VCR
TUNER CD TAPE
12
SAT LD
a
b
c
d
e
LK
off
E
B
3
SOUND MUTED
TV MC
123
456
789
0
TV
0LK
LK
a
c
J
2
3

15
English
Operation
Main Menu
The main menu is split into 2 menus and you can:
. adjust picture and sound according to personal preference
. call up a programme list with an overview of the TV channels stored
. select from among various special features
. select recording sources for your video recorder
. enter the system installation menu.
4Press MENU.
5The MAIN MENU 1 appears.
4Press off to switch off each menu.
Adjusting the picture
4Press MENU.
4Press the corresponding colour key for PICTURE.
5The PICTURE 1 menu appears
4Press one of the colour keys to select the adjustment you want to
regulate.
When you have a set that can receive the NTSC system and when USA
is selected in Selecting the TV system, see p. 7, also the option tint
appears in the PICTURE 2 menu.
5The selected adjustment lights up.
4Press MENU - or + in order to regulate the selected adjustment.
4Press a colour key once more in order to select another adjustment.
Do you want to store the changed adjustment in the memory ?
4See Special Features, PP store, p. 18.
Digital scan (Line Flicker Reduction)
In certain circumstances while watching TV programmes it may be
preferred to switch off the digital scan line flicker reduction.
4Press the corresponding colour key for DIG. SCAN.
4Press MENU - in order to switch off the line flicker reduction.
4Press MENU.
5The MAIN MENU 1 appears again.
TV MC
123
456
789
0
TV
0LK
LK
a
c
a
b
c
d
e2
3
LK
off
You use the keys in the grey area of the
drawing to operate the main menu.
With the colour keys a-b-c-d-e you select
your choice in the menus.
MAIN MENU 1
a ■ picture
b
■ sound
c
■ programme list
d
■ special features
e
■ >>>>>
select : a-e menu off
MAIN MENU 2
a ■ recording source
b
■ system installation
c
■ >>>>>
select : a-c menu off
PICTURE 1
a ■ brightness
b
■ colour
c
■ contrast
d
■ sharpness
e
■ dig. scan
select : a-e menu off

16
Adjusting the sound
4Press MENU.
4Press the corresponding colour key for SOUND.
5The SOUND 1 menu appears.
Volume, balance, treble, bass
4Press one of the colour keys to select the adjustment you want to
regulate.
5The selected adjustment lights up.
4Press MENU - or + in order to regulate the selected adjustment.
4Press a colour key again to select another adjustment.
Do you want to store the modified adjustment in the memory ?
4Press MENU.
5The MAIN MENU 1 appears.
4See Special Features, PP store, p. 18.
Speech
4Press the white key e in the SOUND 1 menu.
5The SOUND 2 menu appears.
4Press the corresponding colour key for SPEECH.
5SPEECH lights up.
4Press MENU + to reveal the treble and to suppress the bass.
4Press MENU - to switch off.
Spatial and surround sound
4Press the corresponding colour key for SPATIAL in the SOUND 2 menu.
5SPATIAL lights up.
4Press MENU - or + to switch off or on.
5When SPATIAL ON is selected, it seems as though the loudspeakers are
spread further apart from one another. You get a spatial sound
effect.
You achieve a Surround Sound effect if you have 2or for a maximum
effect 4extra loudspeakers connected. See Peripherals, p. 31.
In case of 2 extra loudspeakers, always connect them to REAR at the
back of your TV.
In case of 4 extra loudspeakers,connect them to FRONT and REAR.
4Press the loudspeaker switch on the back of the TV out.
5The internal loudspeakers of your TV are now switched off.
4Place the loudspeakers in the corners of an imaginary square.
Mono broadcasting activates the two loudspeakers of your TV set or
the two loudspeakers connected to FRONT and REAR.
4Select SPATIAL ON.
5You get a pseudo stereo effect.
Stereo broadcasting activates the two loudspeakers of your TV or the
two loudspeakers connected to FRONT and the two loudspeakers
connected to REAR.
4Select SPATIAL ON.
5You get a spatial stereo effect.
SOUND 1
a ■ volume
b
■ balance
c
■ treble
d
■ bass
e
■ >>>>>
select : a-e menu off
SOUND 2
a ■ speech
b
■ spatial
c
■ sound mode
d
■ >>>>>
select : a-d menu off

17
English
Operation
Sound mode
4Press the corresponding colour key for SOUND MODE in the SOUND 2 menu.
5SOUND MODE lights up.
5If the TV channel which you are now watching transmits stereo or digital
sound and if your set is equipped with Nicam, you can choose between :
. stereo or mono if the TV channel transmits stereo sound
. digital or analogue if the TV channel transmits digital sound.
4Select analogue or mono in case of weak digital or stereo sound signals.
4Press MENU - or +.
If you do not make a sound choice for the TV channel which you are
watching your TV will choose between stereo or digital sound,
depending on the sound the TV channel transmits.
4Press MENU.
5The MAIN MENU 1 appears again.
Programme list
4Press the corresponding colour key for PROGRAMME LIST in MAIN MENU 1.
5A list with an overview of the first 30 stored TV channels appears.
TV channels from the favourite list are displayed in white characters.
TV channels which are not in the favourite list are displayed in red
characters.
4Press MENU - or + to run through the other pages (to 99) of the
programme list.
4Press MENU.
5The MAIN MENU 1 appears again.
4Press off.
5The MAIN MENU disappears.

18
Special features
4Press MENU.
4Press the corresponding colour key for SPECIAL FEATURES.
5The SPECIAL FEATURES 1 menu appears.
4Press a colour key in order to choose between child lock, sleeptimer,
pp store, demonstration, pip size (for sets with the Picture in Picture
option) or picture format.
5Your choice lights up.
4Press once more on a colour key to make another choice.
Child lock
If the child lock is on, the TV can only be switched on with the digit keys
on the remote control. The keys on the TV cannot be used.
If the message CHILD LOCK ON appears, the child lock should be switched
off.
4Press the corresponding colour key for CHILD LOCK.
4Press MENU - or + to switch the child lock off or on.
Sleeptimer
With the aid of the sleeptimer you can set the time when the TV should
switch itself off.
4Press the corresponding colour key for SLEEPTIMER.
4Hold the key MENU + pressed down.
5The counter runs from off up to 90 minutes.
4Hold the key MENU - pressed down.
5The counter runs from 90 down to off.
If you have set a time, then one minute before the TV switches off the
remaining minute automatically appears on the screen.
You can always switch off your set earlier or change the time set.
PP store
Adjustments made in the picture- and sound menu can be stored in
the memory and be called up again with the PP key.
4Press the corresponding colour key for PP STORE.
5PP STORE lights up and PERSONAL PREFERENCE STORED appears briefly on the
top of the menu.
At this point all previous adjustments are cancelled.
See also Other functions, p. 21.
Demonstration
This function demonstrates one after another all the possible options
of your TV.
4Press the corresponding colour key for DEMONSTRATION.
4Press MENU + to switch the demonstration on.
4Press off in order to stop the demonstration.
SPECIAL FEATURES 1
a ■ child lock
b
■ sleeptimer
c
■ pp store
d
■ demonstration
e
■ >>>>>
select : a-e menu off
SPECIAL FEATURES 2
a ■ pip size
b
■ picture format
c
■ >>>>>
select : a-c menu off
00:59

19
English
Operation
Pip size
You can select either a large or a small pip format.
4Press the corresponding colour key for PIP SIZE in the SPECIAL FEATURES 2
menu.
4Press MENU - or +.
For more information about Pip, see Pip, Picture in Picture, p. 24.
Picture format
A programme in the conventional picture format can be expanded so
that you can take full advantage of your wide screen.
4Press the corresponding colour key for PICTURE FORMAT.
4Press MENU - or + repeatedly to select NORMAL, PANORAMA or EXPAND in
order to choose between a conventional, a panoramic or a full
expanded picture format.
Recording Source
If you want to record a programme, then first read Peripherals,
Recording, p. 34.
System Installation
You can also enter the System Installation menu via the Main Menu 2 to
select your menu language and to locate and to store your TV channels.
4Press MENU.
4Press the corresponding colour key for SYSTEM INSTALLATION in the
MAIN MENU 2.
5The SYSTEM INSTALLATION menu appears on the screen.
4Now follow very closely and step by step the instructions as described
on page 5 and following.
4Press MENU to leave the SYSTEM INSTALLATION menu.
4Press off to leave the SYSTEM INSTALLATION menu or the MAIN MENU.
OFF
OFF

20
Other functions
Picture format
4Press Erepeatedly to select
. or a conventional picture format
. or a panoramic picture format
. or a full expanded picture format
. or a wide screen picture format.
5The information PANORAMA appears briefly on the screen if a panoramic
picture format has been selected.
5The information MOVIE EXPAND appears briefly on the screen if a full
expanded picture format has been selected.
4Keep MENU + pressed to move the full expanded picture upwards so that
the subtitles, if there are, become visible at the bottom.
4Keep MENU - pressed to move the full expanded picture downwards
again.
5The information WIDE SCREEN appears briefly on the screen if a wide
screen picture format has been selected.
Making subtitles visible from pictures from VCR1, VCR2 or SAT in the
MOVIE EXPAND picture format
4Press the TV key on the remote control.
4Keep MENU + or - pressed to move the picture upwards or downwards
again.
4Press the Magain until the designation VCR1, VCR2 or SAT appears in a
grey block.
5Now you can operate your video recorder 1 or 2 or satellite tuner again
with the remote control of the TV.
Previous programme
4Press the 2 key.
5The previous selected TV channel is displayed again.
The 3indication has a video recorder function.
Brightness
4Open the door of the remote control.
4Press A - or + in order to adjust the brightness.
TV MC
123
456
789
0
TV
0LK
LK
a
c2
h
A
MJe
E