Photon Focus MV1-D1024E User manual

User Manual
MV1-D1024E Gigabit Ethernet Series
CMOS Area Scan Cameras
MAN063 09/2014 V1.0

All information provided in this manual is believed to be accurate and reliable. No
responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to
make changes to this information without notice.
Reproduction of this manual in whole or in part, by any means, is prohibited without prior
permission having been obtained from Photonfocus AG.
2

Contents
1 Preface 7
1.1 AboutPhotonfocus...................................... 7
1.2 Contact............................................. 7
1.3 SalesOffices .......................................... 7
1.4 Furtherinformation...................................... 7
1.5 Legend ............................................. 8
2 How to get started (GigE G2) 9
2.1 Introduction .......................................... 9
2.2 HardwareInstallation..................................... 9
2.3 SoftwareInstallation ..................................... 11
2.4 Network Adapter Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.5 Network Adapter Configuration for Pleora eBUS SDK . . . . . . . . . . . . . . . . . . 17
2.6 Gettingstarted ........................................ 18
3 Product Specification 23
3.1 Introduction .......................................... 23
3.2 FeatureOverview ....................................... 24
3.3 AvailableCameraModels .................................. 25
3.4 TechnicalSpecification .................................... 25
4 Functionality 27
4.1 ImageAcquisition....................................... 27
4.1.1 ReadoutModes .................................... 27
4.1.2 Constant Frame Rate (CFR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4.2 PixelResponse......................................... 29
4.2.1 LinearResponse.................................... 29
4.2.2 LinLog®......................................... 30
4.2.3 Skimming........................................ 34
4.3 ReductionofImageSize ................................... 35
4.3.1 RegionofInterest(ROI) ............................... 35
4.3.2 Multiple Regions of Interest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4.3.3 Decimation....................................... 39
4.4 TriggerandStrobe ...................................... 42
4.4.1 Introduction ...................................... 42
4.4.2 TriggerSource..................................... 42
4.4.3 Trigger and AcquisitionMode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4.4.4 ExposureTimeControl ................................ 46
4.4.5 TriggerDelay...................................... 48
4.4.6 StrobeOutput..................................... 48
4.4.7 BurstTrigger...................................... 48
4.4.8 Triggertimingvalues................................. 50
CONTENTS 3

CONTENTS
4.4.9 MissedTriggerCounters ............................... 51
4.5 DataPathOverview...................................... 51
4.6 ImageCorrection ....................................... 53
4.6.1 Overview........................................ 53
4.6.2 Offset Correction (FPN, Hot Pixels) . . . . . . . . . . . . . . . . . . . . . . . . . 53
4.6.3 GainCorrection .................................... 55
4.6.4 CorrectedImage.................................... 56
4.6.5 CorrectionRanges................................... 57
4.7 GainandOffset ........................................ 58
4.8 Grey Level Transformation (LUT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
4.8.1 Gain........................................... 58
4.8.2 Gamma......................................... 60
4.8.3 User-defined Look-up Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
4.8.4 Region LUT and LUT Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
4.9 Crosshairs............................................ 64
4.9.1 Functionality...................................... 64
4.10 Image Information and Status Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
4.10.1 Counters and Average Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
4.10.2StatusLine ....................................... 66
4.10.3CameraTypeCodes.................................. 68
4.11TestImages........................................... 68
4.11.1Ramp .......................................... 68
4.11.2LFSR........................................... 69
4.11.3 Troubleshooting using the LFSR . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
5 Hardware Interface 71
5.1 GigEConnector ........................................ 71
5.2 PowerSupplyConnector................................... 71
5.3 Status Indicator (GigE cameras) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
5.4 Power and Ground Connection for GigE G2 Cameras . . . . . . . . . . . . . . . . . . 72
5.5 Trigger and Strobe Signals for GigE Cameras . . . . . . . . . . . . . . . . . . . . . . . 74
5.5.1 Overview........................................ 74
5.5.2 Single-endedInputs.................................. 77
5.5.3 Single-endedOutputs ................................ 78
5.5.4 Differential RS-422 Inputs (G2 models) . . . . . . . . . . . . . . . . . . . . . . . 80
5.5.5 Master / Slave Camera Connection . . . . . . . . . . . . . . . . . . . . . . . . . 80
5.6 PLCconnections........................................ 81
6 Software 83
6.1 Software for Photonfocus GigE Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . 83
6.2 PF_GEVPlayer ......................................... 83
6.2.1 PF_GEVPlayer main window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
6.2.2 GEVControlWindows ................................ 84
6.2.3 DisplayArea ...................................... 86
6.2.4 White Balance (Colour cameras only) . . . . . . . . . . . . . . . . . . . . . . . . 86
6.2.5 Save camera setting to a file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
6.2.6 Get feature list of camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
6.3 PleoraSDK ........................................... 87
6.4 Frequentlyusedproperties.................................. 87
6.5 Calibration of the FPN Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
6.5.1 Offset Correction (CalibrateBlack) . . . . . . . . . . . . . . . . . . . . . . . . . 87
6.5.2 Gain Correction (CalibrateGrey) . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
6.5.3 Storing the calibration in permanent memory . . . . . . . . . . . . . . . . . . 89
4

6.6 Look-UpTable(LUT) ..................................... 89
6.6.1 Overview........................................ 89
6.6.2 FullROILUT ...................................... 89
6.6.3 RegionLUT....................................... 89
6.6.4 User defined LUT settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
6.6.5 Predefined LUT settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
6.7 MROI .............................................. 90
6.8 Permanent Parameter Storage / Factory Reset . . . . . . . . . . . . . . . . . . . . . . 91
6.9 PersistentIPaddress...................................... 91
6.10PLC ............................................... 92
6.10.1Introduction ...................................... 92
6.10.2 PLC Settings for ISO_IN0 to PLC_Q4 Camera Trigger . . . . . . . . . . . . . . . 93
6.11MiscellaneousProperties................................... 94
6.11.1PixelFormat ...................................... 94
7 Mechanical and Optical Considerations 95
7.1 MechanicalInterface ..................................... 95
7.1.1 Cameras with GigE Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
7.2 AdjustingtheBackFocus................................... 96
7.3 OpticalInterface........................................ 97
7.3.1 CleaningtheSensor.................................. 97
7.4 CEcompliance......................................... 99
8 Warranty 101
8.1 WarrantyTerms ........................................101
8.2 WarrantyClaim ........................................101
9 References 103
A Pinouts 105
A.1 PowerSupplyConnector...................................105
B Revision History 107
CONTENTS 5

CONTENTS
6

1
Preface
1.1 About Photonfocus
The Swiss company Photonfocus is one of the leading specialists in the development of CMOS
image sensors and corresponding industrial cameras for machine vision, security & surveillance
and automotive markets.
Photonfocus is dedicated to making the latest generation of CMOS technology commercially
available. Active Pixel Sensor (APS) and global shutter technologies enable high speed and
high dynamic range (120 dB) applications, while avoiding disadvantages like image lag,
blooming and smear.
Photonfocus has proven that the image quality of modern CMOS sensors is now appropriate
for demanding applications. Photonfocus’ product range is complemented by custom design
solutions in the area of camera electronics and CMOS image sensors.
Photonfocus is ISO 9001 certified. All products are produced with the latest techniques in order
to ensure the highest degree of quality.
1.2 Contact
Photonfocus AG, Bahnhofplatz 10, CH-8853 Lachen SZ, Switzerland
Sales Phone: [phone] Email: [email protected]
Support Phone: [phone] Email: [email protected]
Table 1.1: Photonfocus Contact
1.3 Sales Offices
Photonfocus products are available through an extensive international distribution network
and through our key account managers. Details of the distributor nearest you and contacts to
our key account managers can be found at www.photonfocus.com.
1.4 Further information
Photonfocus reserves the right to make changes to its products and documenta-
tion without notice. Photonfocus products are neither intended nor certified for
use in life support systems or in other critical systems. The use of Photonfocus
products in such applications is prohibited.
Photonfocus is a trademark and LinLog®is a registered trademark of Photonfo-
cus AG. CameraLink®and GigE Vision®are a registered mark of the Automated
Imaging Association. Product and company names mentioned herein are trade-
marks or trade names of their respective companies.
7

1 Preface
Reproduction of this manual in whole or in part, by any means, is prohibited
without prior permission having been obtained from Photonfocus AG.
Photonfocus can not be held responsible for any technical or typographical er-
rors.
1.5 Legend
In this documentation the reader’s attention is drawn to the following icons:
Important note
Alerts and additional information
Attention, critical warning
✎
Notification, user guide
8

2
How to get started (GigE G2)
2.1 Introduction
This guide shows you:
• How to install the required hardware (see Section 2.2)
• How to install the required software (see Section 2.3) and configure the Network Adapter
Card (see Section 2.4 and Section 2.5)
• How to acquire your first images and how to modify camera settings (see Section 2.6)
• A Starter Guide [MAN051] can be downloaded from the Photonfocus support page. It
describes how to access Photonfocus GigE cameras from various third-party tools.
2.2 Hardware Installation
The hardware installation that is required for this guide is described in this section.
The following hardware is required:
• PC with Microsoft Windows OS (XP, Vista, Windows 7)
• A Gigabit Ethernet network interface card (NIC) must be installed in the PC. The NIC
should support jumbo frames of at least 9014 bytes. In this guide the Intel PRO/1000 GT
desktop adapter is used. The descriptions in the following chapters assume that such a
network interface card (NIC) is installed. The latest drivers for this NIC must be installed.
• Photonfocus GigE camera.
• Suitable power supply for the camera (see in the camera manual for specification) which
can be ordered from your Photonfocus dealership.
• GigE cable of at least Cat 5E or 6.
Photonfocus GigE cameras can also be used under Linux.
Photonfocus GigE cameras work also with network adapters other than the Intel
PRO/1000 GT. The GigE network adapter should support Jumbo frames.
Do not bend GigE cables too much. Excess stress on the cable results in transmis-
sion errors. In robots applications, the stress that is applied to the GigE cable is
especially high due to the fast movement of the robot arm. For such applications,
special drag chain capable cables are available.
The following list describes the connection of the camera to the PC (see in the camera manual
for more information):
9

2 How to get started (GigE G2)
1. Remove the Photonfocus GigE camera from its packaging. Please make sure the following
items are included with your camera:
• Power supply connector
• Camera body cap
If any items are missing or damaged, please contact your dealership.
2. Connect the camera to the GigE interface of your PC with a GigE cable of at least Cat 5E or
6.
Et h e r n e t J a c k ( R J 4 5 )
P o w e r S u p p l y
a n d I / O C o n n e c t o r
S t a t u s L E D
Figure 2.1: Rear view of the Photonfocus MV1-D1024E-G2 GigE camera series with power supply and I/O
connector, Ethernet jack (RJ45) and status LED
3. Connect a suitable power supply to the power plug. The pin out of the connector is
shown in the camera manual.
Check the correct supply voltage and polarity! Do not exceed the operating
voltage range of the camera.
A suitable power supply can be ordered from your Photonfocus dealership.
4. Connect the power supply to the camera (see Fig. 2.1).
.
10