Phylrich K8108 User manual

2937 North Ontario Street • Burbank • California 91504-2017
Telephone: 800-PHYLRICH • Fax: [phone]
www.phylrich.com
INSTALLATION INSTRUCTIONS FOR
Single Hole Bar Faucets
Product #’s: K8108, K8158,
K8160, K8161 & K8190
FORM:LIT-INS-810-704

Postion Bar Body as
shown. The hanldes pull
forward for on and the fac-
tory installed mounting
bracket is in the back
Attach Hot and Cold
Flexible Supply Hoses (C)
to the bottom of the Bar
Faucet Body (B).
Position the Bar Body over the
mounting hole as shown.
(Note: The Handles pull for-
ward to turn on.) The Mounting
Bracket must be in the back.)
Feed the Bar Supply Hoses
(C) through the mounting hole
on the counter.
From below the deck, install
the Brass Washer (D) and
Locknut (F) onto the Mounting
Bracket. Before final tighten-
ing, adjust the Bar Faucet so it
is centered and covers the
mounting hole. Tighten
Locknut (E).
Do not over tighten.
Insert Bar Spout (A)
firmly into the Bar
Body (B), making sure
the spout bottoms out.
Slide down the Spout
Nut and tighten it to
the Bar Body.
The Spout will now
swivel completely
around.
Step #1 Step #2
Step #3 Step #4
Attach the Hot and Cold
Supply Hoses to the angle
supply valves
(Not supplied).

Parts Breakout for
K8108, K8158, K8160, K8161, K8190
Final View