PIKO MOI Pro-AMD Specification sheet

MOI Pro-AMD
Get Started Guide V1.0
MOI Pro-AMD has 2 LAN ports, it gets the IP address via DHCP by default, and it will display tuner
information, time, and IP address etc on LCD. All those information are not shown on LCD at the same
time, so you need to use arrow keys to see the information you need:
You will see information on LCD shown as below picture after MOI Pro-AMD is powered up

---2 / 15--- MOI Pro AMD-Get Started Guide V1.0
By using arrow keys, you can scroll other information shown like below pictures
Notes:
1) With LAN1 connected only, you will see “LAN1: xxx.xxx.x.xx LAN2: Disconnect”shown on LCD
2) With LAN2 connected only, you will see “LAN1: Disconnect LAN2: xxx.xxx.x.xx” shown on LCD
3) With LAN1 and LAN2 connected at the same time, you will see “LAN1: xxx.xxx.x.xx LAN2:
xxx.xxx.x.xx “shown on LCD.

---3 / 15--- MOI Pro AMD-Get Started Guide V1.0
Open the browser and enter the IP address displayed on the LCD, you can enter LAN1 IP address or
LAN2 IP address in browser, let’s take 192.168.8.79 for example, enter 192.168.8.79 in browser and
then you will see log-in window. Use “root”as user name and password to log in.
After log in, you will see the homepage as below:
Network Settings:

---4 / 15--- MOI Pro AMD-Get Started Guide V1.0
Click "LAN1 Settings", select "DHCP", and then click "Save", then MOI Pro-AMD will receive a
dynamic IP address from the Ethernet server. Please check below picture for your reference:
You can also set "DHCP" to "STATIC" by selecting “STATIC”, and then enter data for IP Address, Subnet
Mask, Gate Way and DNS Server, then click “Save”, and then "STATIC" will be set successfully. Please
check below picture for your reference:
Click "LAN2 Settings", select "DHCP", and then click "Save", then MOI Pro-AMD will receive a

---5 / 15--- MOI Pro AMD-Get Started Guide V1.0
dynamic IP address from the Ethernet server. Please check below picture for your reference:
You can also set "DHCP" to "STATIC", the method is the same with "LAN1 Settings". Please check below
picture for your reference:
Tuning Settings:

---6 / 15--- MOI Pro AMD-Get Started Guide V1.0
Auto start when power on:
1. If you use None, Tvheadend, VDR and Dvblast will not run
2. If you use Tvheadend, it will enter Tvheadend web page after a few seconds
3. If you use VDR, please select the TV Adapter (tuner) and scan first, after the scan is
done, check VDR to start it.
4. If you use Dvblast, please select the TV Adapter (tuner) and scan first, after the
scan is done, check streaming to start it.
Dvblast settings:
Select "TBS 6904 DVBS/S2 adapter 0", and configure all the parameters like below picture (similarly, you
can click "adapter 1, adapter 2, adapter3…"):

---7 / 15--- MOI Pro AMD-Get Started Guide V1.0
By clicking "Scan Channels" and waiting about 10 seconds if scan success, you will see a channel list.
Under drop-down menu of IP, there have 3 options: auto, 192.168.8.79, and 192.168.8.80, you can
choose one from those 3 options:
1) Choose "auto" means it will stream to 192.168.8.79 (LAN1) or 192.168.8.80 (LAN2) at random
2) Choose 192.168.8.79 means it will stream from LAN1
3) Choose 192.168.8.80 means it will stream from LAN2
You can select UDP as your own preference, take program CCTV 4 for example, if you check UDP, then
the stream coming out is UDP, and the address is udp://@239.255.0.1:1234, and if you uncheck UDP,
then the stream coming out is RTP, so the address now is rtp://239.255.0.1:1234.
Notes: If you need to stream and save the programs, you need to check "Enable", and then check
"Streaming&Save", and then the selected programs will be streamed and saved.

---8 / 15--- MOI Pro AMD-Get Started Guide V1.0
VDR Settings:
1) OSCAM Settings
Select “OSCAM”then it will enter the web page of OSCAM.

---9 / 15--- MOI Pro AMD-Get Started Guide V1.0
Use “root”as user name and password to log in:
Then you will be directed to the OSCAM page as below:

---10 / 15--- MOI Pro AMD-Get Started Guide V1.0
2) Scan for VDR
You can see a drop-down menu shows 12 options from "TBS 6904 DVBS/S2 adapter 0" to "TBS 6904
DVBS/S2 adapter 11" (Tips: Here we use three TBS6904 card for test, if you use our other TBS cards, it
will show different options)
Choose one option and do “DiSEqC settings” and “Scan settings“ as following: