Pinnacle PR7 Mini User manual

PR7 Mini Quick Start Guide
Our New PR7 Mini Retail body-worn video (BWV) is the ideal fit for customer-facing staff.
The miniature design is perfectly formed to fit uniforms or everyday casual wear. The
lightweight unit houses an impressive power-packed feature list, including impressive
memory storage.
PR7 Mini FEATURE LIST
1. COMPACT SIZE: 63.5MM x 50.5MM x 26.1MM
2. ONLY 75g WEIGHT
3. 360 DEGREES ROTATABLE CROCODILE MOUNT OR STUD FOR KLICKFAST MOUNT
4. 500+ HOURS STANDBY TIME
5. 8 HOURS RECORD TIME
6. 3 HOURS CHARGING TIME
7. 30 SECOND PRE-RECORD TIME
8. ULTRA LOW LIGHT PERFORMANCE
9. 32GB BUILT-IN MEMORY
10. 1080P VIDEO RESOLUTION
11. IP RATING OF IP65
12. 6 AXIS IMAGE STABILISER
13. PASSWORD-PROTECTED CAMERA MANAGEMENT SOFTWARE

#
Getting Started
Power On/Off
Press and hold the Red Record button for 3 seconds. The unit will give an audible chirp and
the white LED indicator will illuminate, indicating that the camera is on standby. Camera will
enter into standby mode. In standby mode, the white LED indicator stays ON. To power off,
press and hold the Record button for 3 seconds, the unit will give 2 audible chirps and white
LED indicator will turn off.
Recording From Standby
Press the Red Record button to start recording. The unit will give one audible chirp and the
green LED indicator will flash consistently, indicating that the camera is now recording.
When the camera is recording, press the red record button to stop recording. The unit will
give two audible chips and the green LED indicator will turn off, the white LED indicator will
turn back on.
Photo Taking
Photograph Feature In standby mode, press the Photo button to take photos. The unit will
give one audible chirp and the white LED indicator will blink once.
Pre-Record
When the camera is in standby mode, long press the camera button to switch to pre-record.
The white LED indicator on top of the camera will change to solid green and the camera will
pre-record for 30 seconds. To stop pre-recording, long press the camera button.
Insufficient Storage
When free storage space is less than 5%, the green LED will change to red whilst still
recording.
PASSWORD-PROTECTED CAMERA MANAGEMENT SOFTWARE
Use the Pinnacle Response software on your PC, you will be able to check battery life and
free space, change camera settings and enter into file explorer to view and manage files
saved in camera.

Charging
The camera can be charged via USB, single dock or a multi dock. The camera can charge
through a USB plugged into a wall plug or plugged into a computer via the USB or single
dock.
Troubleshooting

PASSWORD PROTECTED CAMERA
MANAGEMENT SOFTWARE
Installing the Pinnacle Response Camera Management Software allows for viewing and
downloading saved photos and videos, changing device settings, syncing date and time and
also protects your footage with password protection.
Software Requirements: Windows 7, 8, or 10 operating system Hard drive storage for
archiving video (1TB recommended)
1. Open the Camera Manager Software on your computer. Connect camera to computer via
USB cable. Your camera will power on and get connected to the computer.
2. There are 2 user types:
A) General User: This mode allows for viewing and
downloading media files only. The default password is: 000000.
B) Administrator: This mode allows for changing device settings
as well as viewing and downloading media files. The default
password is: 888888
4. Password can be changed and reset for users by the
Administrator account.
3. After login, the Camera Management Software will open on the
Camera Info tab.
4. Click "Open File Explorer" to get access to camera SD card mass
storage. Users are able to check, copy or delete files.