Pinnacle PR7 User manual

PR7 Quick Start Guide

Indication LED 2
Indication LED 1
Hold button for 5
seconds to
activate/deactivate Record Switch
standby. Double click
to turn on/off Wifi.
Wifi will turn off if no Indication LED 3
footage is on the camera
Hold button for
3 seconds to
activate/deactivate
pre-record. To tag a
video, press once.

Charging
Charge your device before first use.
The camera takes approximately 3 hours to reach full charge.
To charge, simply place your PR7 in the charging dock supplied.
Please use the wall plug and charging cable supplied with the PR7. Charging via
a computer USB slot or using aftermarket charging cables will increase the
charging time.
The LED display on the front of the dock indicates the battery level of the PR7.
The indicator LED on the top of the PR7 will also display RED when charging
and will turn BLUE when fully charged with footage on the camera and GREEN
when fully charged with no footage on the camera.

Recording
To start recording with your PR7, slide down the Record Shutter Switch on the
front of the camera marked “AUDIO VIDEO”. When recording has started the
Indication LED 1 will flash GREEN. To cease recording, slide the shutter back up
to the off position. If you have less than 15% storage capacity, then LED 1 will
flash RED.
LED Functions

Troubleshooting
To reset the camera please hold both buttons for 5 seconds. If this does not
resolve the issue, please contact us at [e-mail]