PIONEER DJ DDJ-RX User manual

ｙｙ
DDJ-RX
Hardware Diagram for rekordbox dj
4-2
4-1
5-1
5-4 5-5 5-6 5-7
3-3
3-4
3-5
3-6
3-8
3-14
5-2 5-3
2-10 2-102-10 2-112-11 2-112-11 2-10
2-12 2-12 2-12 2-12
3-2
3-10
3-2
3-10
3
-
13
3
-
9
3-1
3-7
1-3
1-12
1
-
13
1-14
1-15 1-16
6-11 6-12
6-13 6-14
6-9 6-10
1-4
1-5
1-6
1-1
1-2
1-9
1-11
1-7
1-21
1-20
1-22
1-23
1-25
6-1 6-2 6-3 6-4
1
-
8
1-10
1-1
1-2
1-11
1-24
1-20
1-22
1
-
23
1
-
6
3-12
1-26
1-27
4-3
3-11
2-1 2-3 2-4
2-5 2-6 2-7 2-8
2-2
6-5 6-6 6-7 6-8
3-7
3-3
3-4
3-5
3-6
3-12
1-12
1
-
13
1-14
1-15 1-16
6-11 6-12
6-13 6-14
6-9 6-10
6-1 6-2 6-3 6-4
6-5 6-6 6-7 6-8
2-1 2-3 2-4
2-5 2-6 2-7 2-8
2-2
1-4
1-5
1-21
1-26
1-27
1-3
4-2
1-24
1
-
17
1
-
18
1
-
19
1
-
17
1-18
1
-
19
2-9
1-28 1-28
2-9
2-13 2-14
2-15 2-16
3-15 3-16
4-4
1-29 1-29
1

1 Play/Pause 1 1 Beat FX parameter 1
mode
2 Set/call cue, Back cue Move to the beginning of track 2 2 Beat FX parameter 2
HOT CUE
Set/call Hot Cue Delete Hot Cue
Scratch (Vinyl on) 3 3 Beat FX parameter 3
PAD FX 1
Pad FX on
-
*18
Pitch bend (Vinyl off) Select Release FX
Beat FX time parameter adjustment SLICER
Slicer section playback Slice shift (Pad 5 and Pad 6)
*19
wheel side
Pitch bend press Release FX on Select Beat FX mode
*12
Sampler slot playback stop
*20
4 TEMPO Tempo control 5 ON Beat FX on/off Select Beat FX
Load a sample to Sampler slot
5 MASTER TEMPO Master tempo on/off Tempo range 6 ON Beat FX on/off / parameter 4
Select Beat FX (muilti mode only)
BEAT JUMP Move Playback position -
*21
6
*1
7 ON Beat FX on/off / parameter 5
Select Beat FX (muilti mode only) PAD FX 2
Pad FX on -
*18
7 DECK 1 Select deck 1 -
*2
8 BEAT < Select beats for Beat FX BPM auto mode on
SLICER LOOP
Slicer section playback Slice shift (Pad 5 and Pad 6)
*19
8 DECK 2 Select deck 2 -
*2
9 BEAT > Select beats for Beat FX BPM tap mode on Sampler slot playback stop
*20
9 DECK 3 Select deck 3 -
*2
10 FX1 FX 1 assign on/off
Load a sample to Sampler slot
10 DECK 4 Select deck 4 -
*2
11 FX2 FX 2 assign on/off
ACTIVE CENSOR
Active Censor -
*27
11 SYNC Sync on/off Set to master deck 12 COLOR SOUND COLOR FX parameter
SEQUENCE CALL
Sequence slot playback Sequence Slot Stop
Auto Beat Loop on
*3
13 NOISE Noise effect on/off
*13
HOT CUE mode on BEAT JUMP mode on
Auto Beat/ManualLoop off 14 CRUSH Crush effect on/off
*13
press twice ACTIVE CENSOR on -
Select loop size 15 PITCH Pitch effect on/off
*13
10 PAD FX 1 PAD FX mode 1 on PAD FX mode 2 on
Loop half 16 FILTER Filter effect on/off
*13
11 SLICER SLICER mode on SLICER LOOP mode on
Select loop size SAMPLER mode on VELOCITY SAMPLER mode on
Loop double 1 CROSSFADER Crossfader Crossfader start press twice SEQUENCE CALL on -
Loop in/Loop in adjustment Retrigger
*4
2 CH FADER Channel fader Channel fader start
mode
longpress
Auto 4-beat loop on
-
3 TRIM Trim
HOT CUE
Select a cue point or loop stored in a track -
*22
16 LOOP OUT Loop out/Loop out adjustment Reloop/Exit 4 HI EQ (High)
PAD FX 1
Change beat setting for Pad FX temporarily -
17 CAPTURE Loop capture Slicer capture
*5
5 MID EQ (Mid)
SLICER
Slice roll setting Slice length setting
*23
18 SEQ OVERDUB Sequence recording standby Save Sequence
*6
6 LOW EQ (Low) -
19 SEQ START Sequence playback start Select Sequence slot
PC/CD/LINE *24
20 SLIP REVERSE Slip reverse playback Reverse playback
*7 /PHONO
BEAT JUMP
Beat setting for Beat jump Beat setting for Beat Jump
*26
21 SLIP Slip mode on/off Vinylmode on/off
MIC
MIC talk over on/off
PAD FX 2
Change beat setting for Pad FX temporarily -
22 GRID ADJUST Beat grid adjustment Expand beat grid interval
*8
8 MASTER LEVEL Master out volume
SLICER LOOP
Slice roll setting Slice length setting
*23
23 GRID SLIDE Beat grid slide Reduce beat grid interval
*9
9 MASTER CUE Master out monitor on/off -
24 SHIFT Shift -
A
Assign to left deck
*24
25 FX PANEL Select layout of FX panel Sampler panel on/off
*10 THRU
Crossfader through
ACTIVE CENSOR
Call IN point of the specified section Beat setting for effect
*28
26 Takeover indicator－
B
Assign to right deck
SEQUENCE CALL
- -
27 Takeover indicator＋11 MASTER LEVEL Master level indicator
mode
28 QUANTIZE Quantize on/off Load Sequence 12 CH LEVEL Channel level indicator
HOT CUE
Select a cue point or loop stored in a track -
*22
29 On air indicator
*11
13 SAMPLER VOLUME Sampler volume
PAD FX 1
Change beat setting for Pad FX temporarily -
14 BOOTH MONITOR LEVEL Booth out volume
SLICER
Slice roll setting Slice length setting
*23
15 SAMPLER SYNC Sampler sync on/off Set Sampler to master deck
*14 -
16 SAMPLER CUE Sampler monitor on/off Sampler tap BPM
*15 *25
BEAT JUMP
Beat setting for Beat jump Beat setting for Beat Jump
*26
1 Crossfader curve
PAD FX 2
Change beat setting for Pad FX temporarily -
2 INPUT SELECT PC/External input select
SLICER LOOP
Slice roll setting Slice length setting
*23
3 Monitor balance
-
4 HEADPHONES VOL Monitor volume
*25
ACTIVE CENSOR
Call IN point of the specified section Beat setting for effect
*28
rotate
Scroll Track list/Tree view
SEQUENCE CALL
- -
press
Move cursor between Track list and Tree view
*16
2 BACK
Move cursor betweenTrack list and Tree view Select layoutof Browse section
*16, *17
4 LOAD Load to deck 1 Sort by BPM
5 LOAD Load to deck 2 Sort by track title
6 LOAD Load to deck 3 Sort by track number
7 LOAD Load to deck 4 Sort by Artist name
+SHIFT Group
PLAY/PAUSE
15 LOOP IN
3 TAG TRACK
Name Function +SHIFT
1,DECK 2,EFFECT 6,PERFORMANCE PADS
No. Name Function +SHIFT Group No.Group No. Name Function
3 JOG
platter
Search 4
SAMPLER
Sampler slot playback
NEEDLE SEARCH Needle Search
VELOCITY
SAMPLER
Sampler slot playback/
Sampler slot volume adjustment
1〜8PERFORMANCE
PAD
CUE
RELEASE FX
SAMPLER
12 AUTO BEAT LOOP Active Loop 9 HOT CUE
13 LOOP 1/2X Loop move left
14 LOOP 2X Loop move right
3, MIXER
12
Select Sampler bank
Sequence MUTE mode on/off
7 CUE Headphone monitor on/off Tap BPM 13 PARAMETER
(◀)
SAMPLER
VELOCITY
Select Sampler bank
Sequence MUTE mode on/off
10 CROSSFADER
ASSIGN
SAMPLER
Select Sampler bank
Sequence ERASE mode on/off
4,FRONT PANEL
CROSS F.CURVE
VELOCITY
Select Sampler bank
Sequence ERASE mode on/off
Add track to TAG LIST Related track list display
on/off
HEADPHONES MIX
14 PARAMETER
(▶)
5,BROWSER
1 BROWSE
2

*1: If the Needle Lock settingin the Preferences of rekordbox djis set to "Lock", the Needle search functionis available whena track is paused or you touch top surface of Jog dial.
*2: Inorder to activate DUAL DECK mode for left deck, press the [DECK 3] button while pressingthe [DECK 1] buttonor press the [DECK 1] buttonwhile pressing the [DECK 3] button.
In order to cancel DUAL DECK mode for left deck, press the [DECK 1] button or [DECK 3] button.
Inorder to activate DUAL DECK mode for right deck, press the [DECK 4] button while pressingthe [DECK 2] buttonor press the [DECK 2] buttonwhile pressing the [DECK 4] button.
Inorder to cancel DUAL DECK mode for right deck, press the [DECK 2] button or [DECK 4] button.
*3: When the [AUTO BEAT LOOP] button is pressed while pressing the [SHIFT] button during playback, the loop set closest to the playback position among the loops saved in the track will be active.
*4: When the [LOOP IN] button is pressed while pressing the [SHIFT] button during loop playback, the playback position moves to the loop-in point and the loop playback continues.
*5: Pad mode of the unit becomes SAMPLER mode while the [CAPTURE] button is pressed. When a Performance Pad is pressed while pressing the [CAPTURE] button during loop playback, the loop is loaded to a Sampler slot.
When the [CAPTURE] button is pressed while pressing the [SHIFT] button during SLICER mode or SLICER LOOP mode, each sections in SLICER are loaded to Sampler slots.
*6: Inorder to record a Sampler performance with Sequencer, the playback mode of the Sampler slot is required to set to [Oneshot]mode.
*7: Evenif the [SLIP REVERSE] buttonis keptpressed, slip reverse playback is automatically canceled after 8 beats have elapsed.The playback returns to normal after revertingto the background.
*8: When Jog dial is turned while pressing the [GRID ADJUST] button, the beat grid interval can be adjusted.
When the [GIRD ADJUST] button is pressed while pressing the [SHIFT] button, the beat grid's spacing is doubled.
*9: When Jog dial is turned while pressing the [GRID SLIDE] button, the overall beat grid can be slid to the left or right.
When the [GRID SLIDE] button is pressed while pressing the [SHIFT] button, the beat grid's spacing is reduced by 1/2.
*10: Each time the [FX PANEL] button is pressed, display of [FX] panel and [CFX] panel is switched as follows.
[FX] panel
･
[CFX] panel display off
→
[FX] panel
→
[CFX] panel
→
[FX] panel+ [CFX] panel
→
back to [FX] panel
･
[CFX] panel display off
*11: When the sound of the deck being operated can be output as the master sound, the indicator lights.
As with the [SLIP] button, it is possible to display the slip status if you change the setting in Utilities mode.
*12: When the release FX is turned on, the beat FX inthe same effect unit are turnedoff.
*13: If the [INPUT SELECT] switch is [PC] position, SOUND COLOR FX included in rekordbox dj are available. If the [INPUT SELECT] switch is other than [PC] position, SOUND COLOR FX included in this unit are available.
*14: When the [SAMPLER SYNC] button is pressed while pressing the [SHIFT] button, the Sampler is set as the master for synchronization.
*15: Only a Sampler slot withthe playback mode set to [Loop]willbe the same tempo as the BPM value on the Sampler panel.
*16: While the playlist palette is displayed, the cursor moves between the track list, tree viewand playlist panel.
*17: Each time the [BACK] button is pressed while pressing the [SHIFT]button, display of the Browse section is switchedas follows.
TAG list
･
Playlist palette display off
→
TAG list
→
Playlist palette bank 1
→
Playlist palette bank 2
→
Playlist palette bank 3
→
back to TAG list
･
Playlist palette display off
*18: When Pad 1, Pad 2, Pad 3, Pad 4, Pad 5, Pad 6, or Pad 7 is pressed, the Pad FX turns on according to the effect type and number of beats settings assigned to the pad that was pressed.
WhenPad 8 is pressed, the Release FX turns on according to effect type assigned to the pad was pressed.(Pad FX other than the Release FX are turnedoff at the same time.)
*19: When Pad 5 is pressed while pressingthe [SHIFT] button,the slicer's target area moves to the left.
WhenPad 6 is pressed while pressing the [SHIFT] button, the slicer's target area moves to the right.
*20: Left Pad 1 is assigned to the Sampler slot 1 and left Pad 8 is assignedto the Sampler slot 8. Right Pad 1 is assignedto the Sampler slot 9 and right Pad 8 is assigned to the Sampler slot 16.
*21: When Pad 1, Pad 3, Pad 5, or Pad 7 is pressed, the playback position moves to the left by the number of beats or number of bars assigned to the pressed pad.
When Pad 2, Pad 4, Pad 6, or Pad 8 is pressed, the playback position moves to the right by the number of beats or number of bars assigned to the pressed pad.
*22: If the [Memory Cue CallLock] setting in the Preferences of rekordbox is set to [Lock], the Cue point/Loop stored in a track can be called during pause.
*23: When the [PARAMETER (
◀
)] button or [PARAMETER (
▶
)] button is pressed, the loop playback length while the pad is pressed can be changed with the "SLICE ROLL" setting.
When the [PARAMETER (
◀
)] button or [PARAMETER (
▶
)] button is pressed while pressing the [SHIFT] button, the slicer's target area can be changed with the "SLICE LENGTH" setting.
*24: When the [PARAMETER (
◀
)] buttonis kept pressed during a sequence playback, the Sequence MUTE mode is turned on. If a Performance Pad is pressed while the Sequence MUTE mode is activated,a sequence of the Sampler slot assigned to the pressed pad can be muted.
*25: When the [PARAMETER (
▶
)] buttonis kept pressed during a sequence playback, the Sequence ERASE mode is turned on. If a Performance Padis pressed while the Sequence ERASE mode is activated,a sequence of the Sampler slot assigned to the pressed pad can be erased.
*26: When the [PARAMETER (
◀
)] button is pressed, the number of beats for Beat jump assigned to each Performance Pads are halved.
When the [PARAMETER (
▶
)] button is pressed, the number of beats for Beat jump assigned to each Performance Pads are doubled.
When the [PARAMETER (
◀
)] button is pressed while pressing the [SHIFT] button, the number of beats for Beat jump assigned to each Performance Pads is swtiched as follows.
[16 beats / 8 bars / 16 bars / 32 bars] →[1 beat / 2 beats / 4 beats / 8 beats] →[FINE / 1/8 beat / 1/4 beat / 1/2 beat]
When the [PARAMETER (
▶
)] button is pressed while pressing the [SHIFT] button, the number of beats for Beat jump assigned to each Performance Pads is switched as follows.
[FINE / 1/8 beat / 1/4 beat / 1/2 beat] →[1 beat / 2 beats / 4 beats / 8 beats] →[16 beats / 8 bars / 16 bars / 32 bars]
3

*27: In the Active Censor Mode, you can set the followings usingperformance pads.
PAD 1-4 : Apply the followingFX to the specified section
PAD 1 REV ROLL
PAD 2 TRANS
PAD 3 ECHO
PAD 4 V.BRAKE
Note: Only one FX can be applied to one track.
PAD 5 : Sets the IN point
PAD 6 : Sets the Out point
PAD 7 : Clears the specified section
PAD 8 : Turn on/off Active Censor
For details on ACTIVE CENSOR function,see the rekordbox software’s manual.
https://rekrodbox.com
*28: BEAT adjustment is enabled only when TRANS or V.BRAKE is selected.
3rd edition © 2016 Pioneer DJ Corporation All rights reserved.
4

Change history
Addition
[6,PERFORMANCE PADS]
・[No.1~8 PERFORMANCE PAD]
[ACTIVE CENSOR] [Active Censor] 、
[SEQUENCE CALL] [Sequence slot playback] [Sequence Slot Stop]、
・[9 HOT CUE]
[press twice] [ACTIVE CENSOR on]
・[12 SAMPLER]
[press twice][SEQUENCE CALL on]
・[13 PARAMETER]
[ACTIVE CENSOR] [Call IN point of the specified section] [Beat setting for effect]、
[SEQUENCE CALL]
・[14 PARAMETER]
[ACTIVE CENSOR] [Call IN point of the specified section] [Beat setting for effect]、
[SEQUENCE CALL]
Notation 27 and 28 were added.
[1,DECK]
・[28 QUANTIZE] [Load Sequence]
3rd edition October 19, 2016
2nd edition June 16, 2016
Addition
1st edition October 15, 2015
5