Pipishell PIWS02 User manual

Webcam Stand Instruction Manual
V1.0
Model: PIWS02
Thank you for choosing this Pipishell product! At Pipishell we strive to provide
you with the best quality products and services in the industry. Should you have
any issues, please don't hesitate to contact us.
Technical Support:
1-800-556-9829 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
[email protected] (US/CA)
Thank you again for
choosing this Pipishell product!
All of us at Pipishell do appreciate your product purchase. We hope that you are
as happy with your product as we are designing and manufacturing it for you.
We strive to provide you with the best quality products and services in the
industry. Should you have any issues, please don't hesitate to contact us.
Technical Support: 1-800-556-9829 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info: [email protected] (US/CA)
Please check www.pipishellav.com for more products and company information.

3
Product Features
1. Webcam Stand Length: Gooseneck arm can be extended to the max
approx. 15 in.(38cm)
2. The max thickness 2 in.(5cm) of the clamp make the webcam stand fit for the desk,
table, sideboard, bed.
3. It is only suitable for the webcam with standard 1/4in screw thread. Before you place
your order, please make sure your webcam comes with this standard 1/4in screw thread.
It is not suitable for the webcam without 1/4in screw thread.
4. 360° swivel ball head allows your webcam to rotate to get different best angles.
Note: Recommend to put the jaws flex clamp mount on a stable non-moving object, not
on something that vibrates, or it’s hard to maintain high quality picture effects. And not
for heavy camera and devices.
Specifications:
Product Parts
Model: PIWS02
Color: Black
Main Material: Metal+plastic
Item Weight: Approx. 0.3kg
Item Length: Approx. 15 in.(38cm)
Max load weight 0.9 kg (1.98 lb)
1
2
3
4
5
6
7
8
Desk Clamp
Hollow Ring
Screw Thread
Slot
Clasp
Fixation Pin
Iron Tube
Swivel Head
Assembly Instruction
Step 1: Put the hollow ring set in the swivel head.
Step 2: Fix in the slot on the top of the swivel head.
Step 3: Knob tightly the hollow ring up to the bottom of the slot.
Step 4: Insert clasp into the slot, please try to find the best cut on both
- sides if you install it for the first time.
Step 5: Insert the screw head at the top of the slot, and align the hole.
Step 6: Put the fixation pin in the hole and knob to tighen it.
Step 7: Secure the iron tube to the desk clamp.
Step 8: Secure the desk clamp to the desk.
Step 5 Step 6
01 02