Rigol MSO4000 Series User manual

Installation Guide RIGOL
1
Rack Mount Kit
MSO4000/DS4000
This rack mount kit is designed to mount RIGOL MSO4000/DS4000 series digital
oscilloscope into a 19-inch cabinet that conforms to the Electronic Industries Association
(EIA) standard.
Kit Part Checklist
No. Name Qty. Description
1 Front Plate 1 --
2 Right Plate 1 --
3 Left Plate 1 --
4 M4 Screw 4 M4x8 Phillips Pan Head Screw
5 M6 Screw 6 M6x16 Phillips Pan Head Screw
6 M6 Nut 6 M6 Square Lock Cage Nut
Installation Tool
The PH2 Philips screwdriver is recommended.
RIGOL
4 5 6
1 2 3
Installation Guide RIGOL
2
Space Requirements
To mount the instrument into the cabinet correctly, please ensure that the following
requirements are met.
The cabinet must be a standard 19-inch one.
The available height of the cabinet should be at least 6U (266.7 mm).
The depth of the cabinet should be at least 400 mm.
The dimensions of the rack are as shown below.
Unit: mm
Installation Procedures
CAUTION
Only authorized operators are allowed to perform the installation. Improper
installation might cause damage to the instrument or an installation failure.
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30

Installation Guide RIGOL
1
Rack Mount Kit
MSO4000/DS4000
This rack mount kit is designed to mount RIGOL MSO4000/DS4000 series digital
oscilloscope into a 19-inch cabinet that conforms to the Electronic Industries Association
(EIA) standard.
Kit Part Checklist
No. Name Qty. Description
1 Front Plate 1 --
2 Right Plate 1 --
3 Left Plate 1 --
4 M4 Screw 4 M4x8 Phillips Pan Head Screw
5 M6 Screw 6 M6x16 Phillips Pan Head Screw
6 M6 Nut 6 M6 Square Lock Cage Nut
Installation Tool
The PH2 Philips screwdriver is recommended.
RIGOL
4 5 6
1 2 3
Installation Guide RIGOL
2
Space Requirements
To mount the instrument into the cabinet correctly, please ensure that the following
requirements are met.
The cabinet must be a standard 19-inch one.
The available height of the cabinet should be at least 6U (266.7 mm).
The depth of the cabinet should be at least 400 mm.
The dimensions of the rack are as shown below.
Unit: mm
Installation Procedures
CAUTION
Only authorized operators are allowed to perform the installation. Improper
installation might cause damage to the instrument or an installation failure.
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30

Installation Guide RIGOL
3
1．Install the left plate: Attach the left plate to the left edge of the front plate, then fasten
them with two M4 screws.
2．Place the instrument: Place the instrument into the frame set up by the front plate and
the left plate.
Installation Guide RIGOL
4
3．Install the right plate: Attach the right plate to the right edge of the front plate, then
fasten them with two M4 screws.
4．Get encased in the cabinet: Mount the assembled instrument and rack into a standard
19-inch cabinet by using six M6 screws and six M6 square nuts.
-End-
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30

Installation Guide RIGOL
1
Rack Mount Kit
MSO4000/DS4000
This rack mount kit is designed to mount RIGOL MSO4000/DS4000 series digital
oscilloscope into a 19-inch cabinet that conforms to the Electronic Industries Association
(EIA) standard.
Kit Part Checklist
No. Name Qty. Description
1 Front Plate 1 --
2 Right Plate 1 --
3 Left Plate 1 --
4 M4 Screw 4 M4x8 Phillips Pan Head Screw
5 M6 Screw 6 M6x16 Phillips Pan Head Screw
6 M6 Nut 6 M6 Square Lock Cage Nut
Installation Tool
The PH2 Philips screwdriver is recommended.
RIGOL
4 5 6
1 2 3
Installation Guide RIGOL
2
Space Requirements
To mount the instrument into the cabinet correctly, please ensure that the following
requirements are met.
The cabinet must be a standard 19-inch one.
The available height of the cabinet should be at least 6U (266.7 mm).
The depth of the cabinet should be at least 400 mm.
The dimensions of the rack are as shown below.
Unit: mm
Installation Procedures
CAUTION
Only authorized operators are allowed to perform the installation. Improper
installation might cause damage to the instrument or an installation failure.
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30