Pixmob Broadcaster User manual

Version 1.4
2015-08-25
INSTALLATION MANUAL

TABLE OF
CONTENTS

1. PixMob Broadcaster
2. Materials needed
3. Installation
4. Broadcaster menu
5. Troubleshooting
6. Broadcaster characteristics
p. 4
p. 6
p. 8
p. 10
p. 14
p. 15

1. Color indicator
2. Control buttons
3. Outgoing RF indicator light
4. DMX signal indicator light
5. Ethernet indicator light
6. On / Oindicator light
A Broadcaster is a Bluetooth trans-
mitter that controls PixMob luminous
objects wirelessly. Similarly to a LED
flood light it is controllable by a lighting
board through DMX.
1. PixMob Broadcaster
PixMob Broadcaster
4
1
2
3
4
5
6

6. DMX XLR5 IN
7. DMX XLR5 OUT
8. Ethernet (not activated)
9. Powercon IN (110V - 220V AC)
10. Powercon OUT (110V - 220V AC)
11. Antenna
PixMob Broadcaster
5
11 106 7 8 9

1. PixMob Broadcaster
2. Antenna
3. DMX XLR5cable
4. Power cable (Powercon)
With light console
2. Material needed
Material needed
6
1
2

1. Plug DMX IN (female) at Broadcaster.
2. Plug DMX OUT (male) at console.
3. Install fixture in console (pc).
Connecting the Broadcaster
Material needed
7
CONSOLE BROADCASTER
DMX
Examples for connecting the Broadcaster.
4
3

Installation
8
3. Installation
This picture shows the dierent connections of the Broadcaster. Broadcasters can also be connected in
daisy-chain by connecting DMX OUT to DMX IN of the next Broadcaster and AC OUT to AC IN of
the next Broadcaster.
Installing the Broadcaster